Message Type And Message Body..............
Nov 17, 2006
Hello,
I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.
// Create an empty request message
string Msg = "Hello";
MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));
Message request = new Message("Request", body);
Thanks,
Scott Allison...
View 1 Replies
ADVERTISEMENT
Oct 27, 2013
I need to set a trigger so that an email is generated when a row is inserted into the ABC_DB_OnlineFormsConfirm table. The message will include data not only from that table, but from a related table called ABC_DB_OnlineForms. The common field between the two is FormID. This is related to an online account application process where the user has the option of completing it in one session, or saving it and coming back at a later time. Once the user has completed the first screen and clicks continue, a record is written to ABC_DB_OnlineForms. At the very end, when he clicks “Save and Complete”, a row is written to the ABC_DB_OnlineForms table. I would like the body of the email to include three separate lines, as follows. The first two pieces of data come from the OnlineForms table and the third from OnlineFormsConfirm. The field names are userid, IRSBackup and ConfirmationCode.
UserID:
Subject to IRS Backup Withholding?:
Confirmation Code:
What I have below results in an email body that contains the confirmation code all by itself. If I switch @body=@MessageBody to @body=@UserID or @body=@Backup, it will report the correct single piece of data, but I have no idea how to get all three pieces at once as separate lines including the leading descriptor (UserID:, Confirmation Code, etc.).
CREATE TRIGGER SendEmail
ON [ABC].[dbo].[ABC_DB_OnlineFormsConfirm]
AFTER INSERT
AS
Begin
Declare @MessageBody varchar(100)
[code]...
View 7 Replies
View Related
Sep 13, 2005
Created a SP that uses system function XP_SENDMAIL. I wantto be able to send a HYPERLINK in the email. TheHYPERLINK is created dynamically and generally long in length (exceedsdefault width of 80 characters) and when rendered in the email is splitacross 2 lines. The problem is that when you click on the link itdisregards the part of the link that has been split onto the linebelow.Does anyone know a solution to this - how to extend the width of theemail to wider that 80 characters so that the link is not split over 2lines? I know that you can use the @width parameter when placing themessage in an attatchment, however I want the link to be placed in thebody of the email and not in an attachment.Any help is much appreciated..
View 2 Replies
View Related
Oct 5, 2005
Hello everyone,
Please i need your help...
I dont know how to place the field 'strTitle and datBorrowed " in my email? Not as an attachment though....Just write it in the mail as part of message body...
I use this SQL select statement to retrieve the strTitle and datBorrowed fields
strSQL += @"Select replace(strtitle,'[Original Book] - ',''), datBorrowed from tblBooks where convert(varchar(10),datBorrowed,101) = convert(varchar(10),(getdate() - 1),101) ORDER BY strTitle asc";
Now, I have the following code to write the email
static void SendTest()
{
int iEmailLanguage = 0;
MailMessage objMail;
objMail = new MailMessage();
objMail.From = MAIL_FROM;
objMail.To =MAIL_TO;
objMail.Subject = "Books Borrowed Yesterday";
objMail.Body = Dict.GetVal(iEmailLanguage, "EMAIL_MESSAGE");
objMail.Attachments.Add(new MailAttachment(strAttachment));
SmtpMail.SmtpServer = SSMTP_SERVER;
SmtpMail.Send(objMail);
}
And the body of the email is this......
Dict.AddVal(0, "EMAIL_MESSAGE", "*** This e-mail is automatically generated. ***" +
"*** PLEASE DO NOT REPLY TO THIS E-MAIL. ***" +
"" +
"Books Borrowed Yesterday are:" +
"" +
"" +
"Thank you," +
"" +
"eLibrarian" +
"" +
"================================================== ===============" +
"" +
"This e-mail is automatically generated by the Library system." +
"Please do not reply.");
i need to put or wedge the data i got from the SQL Statement into this or after the line "Books Borrowed Yesterday are:" +
So how should i do this?
View 3 Replies
View Related
Jun 25, 2014
What I am trying to do, Extract the data from SQL table and Insert in Email Body and email to user. I got good article on Internet, I follow all steps as it is, but still I am getting error.
Here is the link : [URL] ....
But I am getting Error:
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args)
at System.String.Format(IFormatProvider provider, String format, Object[] args)
at ST_7f59d09774914001b60a99a90809d5c5.csproj.ScriptMain.Main()
[Code] ....
View 4 Replies
View Related
Jul 23, 2007
In my SQL Server, I see the below message in the Application Event Viewer
"18265 :
Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."
When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:
" Can't find or load message DLL. Message DLL must be in path or in current directory."
Any thoughts to overcome this problem is appreciated.
Thanks
Santhosh
View 3 Replies
View Related
Aug 8, 2007
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?
View 5 Replies
View Related
Aug 8, 2007
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?
View 1 Replies
View Related
Jan 10, 2007
Hi There
In my testing i have seen the following i just would like confirmation that i am correct.
When something happens to cause a Dialog Error say for example message validation fails.
I have noticed that the actual DialogError message always goes to the initiator queue, is this correct ?
If so then logic to handle the ErrorDialog message type only has to be in the initiator activated SP that logic is not required in the target queue activated SP since the ErrorDialog message always goes to the initiator queue, is that correct ?
Thanx
View 1 Replies
View Related
May 21, 2015
I'm having trouble with cube processing. While processing a code I'm getting a "Invalid column name MessageType" error.
I unfolded the cube, then I opened "measure groups", my failing dimension (ServiceRequestDim) and the partition.
In the partition I opened the "Source" attribute so it now includes my column which was missing. But it didn't solve the issue.
If I get the query used during the process I'm getting this :
SELECT
DISTINCT
[ServiceRequestDim].[MessageType] AS [ServiceRequestDimMessageType0_0]
FROM
(
Select IsNull(IsDeleted, 0) as IsDeleted, [ServiceRequestDimKey], IsNull([Status_ServiceRequestStatusId], 0) as [Status_ServiceRequestStatusId],[Status],IsNull([TemplateId_ServiceRequestTemplateId], 0) as
[Code] ....
In the nested query which defines ServiceRequestDim the messagetype attribute is still missing. In my source datamart the ServiceRequestDim has the "MessageType" column.
So the question is where do I change the nested request that the dim process use to reflect the actual columns in my datamart .
View 4 Replies
View Related
Oct 3, 2007
Hi,
We are running :
- Visual Studio 2005 Team Edition for Software Developers
- SQL Server 2005 Express (SQLEXPR32.EXE)
Installed :
- SQL Server with Advanced Services (SQLEXPR_ADV.EXE) incl. Reporting Services
- SQL Server Toolkit (SQLEXPR_TOOLKIT.EXE)
We have a VS Solution with a Reporting Project
When opening Visual Studio, the following message appears :
"Make sure the application for the project type (.rptproj) is installed."
I have no idea why this message appears.
Is this a known problem/bug ? Anybody any idea how I can solve this ?
Many thanks in advance.
Vincent
View 2 Replies
View Related
Jun 13, 2007
hi
I am trying something very simple but cannot see why it is failing.
I am trying to add a filename to the message source of a mail task from a variable.
I have Variable 1 User::CurrentFilePath, Scope = ForEachLoop, Data Type = String
and Variable 2 User::mailSource, Scope = ForEachLoop, Data Type = String
Variable 2 EvaluateAsExpression is set to True and the Expression for now is simply "Processing of File " + [User::CurrentFilePath] + "has Begun"
However when i enter this i get
The expression for variable "Test2" failed evaluation. There was an error in the expression.
In the Value and Value type boxes of the variable property.
Any advice greatly received
Regards
Scott
View 1 Replies
View Related
Oct 3, 2007
Hi,
We are running :
- Visual Studio 2005 Team Edition for Software Developers
- SQL Server 2005 Express (SQLEXPR32.EXE)
Installed :
- SQL Server with Advanced Services (SQLEXPR_ADV.EXE) incl. Reporting Services
- SQL Server Toolkit (SQLEXPR_TOOLKIT.EXE)
We have a VS Solution with a Reporting Project
When opening Visual Studio, the following message appears :
"Make sure the application for the project type (.rptproj) is installed."
I have no idea why this message appears.
Is this a known problem/bug ? Anybody any idea how I can solve this ?
Many thanks in advance.
View 1 Replies
View Related
Jan 19, 2007
Hi,
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
View 2 Replies
View Related
Apr 3, 2014
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
View 1 Replies
View Related
Jan 16, 2008
Greetings everyone, I am attempting to build my first application using Microsofts Sql databases. It is a Windows Mobile application so I am using Sql Server Compact 3.5 with Visual Studio 2008 Beta 2. When I try and insert a new row into one of my tables, the app throws the error message shown in the title of this topic.
'((System.Exception)($exception)).Message' threw an exception of type 'System.NotSupportedException'
My table has 4 columns (i have since changed my FavoriteAccount datatype from bit to Integer)
http://i85.photobucket.com/albums/k71/Scionwest/table.jpg
Account type will either be "Checking" or "Savings" when a new row is added, the user will select what they want from a combo box.
Next is a snap shot of my startup form.
http://i85.photobucket.com/albums/k71/Scionwest/form.jpg
Where it says "Favorite Account: None" in the top panel, I am using a link label. When a user clicks "None" it will go to a account creation wizard, and set the first account as it's primary/favorite. As more accounts are added the user can select which will be his/her primary/favorite. For now I am just creating a sample account when the label is clicked in an attempt to get something working. Below is the code used.
private void lnkFavoriteAccount_Click(object sender, EventArgs e)
{
FinancesDataSet.BankAccountRow account = this.financesDataSet.BankAccount.NewBankAccountRow();
account.Name = "MyBank Checking Account";
account.AccountType = "Checking";
account.Balance = Convert.ToDecimal("15.03");
account.FavoriteAccount = 1;//datatype is an integer, I have changed it since I took the screenshot.
financesDataSet.BankAccount.Rows.Add(account);
//The next three lines where added while I was trying to get this to work.
//I don't know if I really need them or not, I receive the error regardless if these are here or not.
this.bankAccountTableAdapter1.Update(financesDataSet);
this.financesDataSet.AcceptChanges();
refreshDatabase();
}
the refreshDatabase() code is here:
private void refreshDatabase()
{
this.bankAccountTableAdapter1.Fill(this.financesDataSet.BankAccount);
//Aquire a count of accounts the user has
int numAccounts = financesDataSet.BankAccount.Count;
//Loop through each account and see which one is the primary.
for (int num = 0; num != numAccounts; num++)
{
//Works ok in frmMain_Load, but when my lnkFavoriteAccount_click calls this, it throws the error.
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
{
//Display the primary account on our home page. User can click the link label & be taken to their account register.
this.lnkFavoriteAccount.Text = this.financesDataSet.BankAccount[num].Name.ToString();
this.lnkFavoriteFunds.Text = this.financesDataSet.BankAccount[num].Balance.ToString();
break;
}
}
}
and my form_load code
private void frmMain_Load(object sender, EventArgs e)
{
refreshDatabase();
}
So, when I click on the lnkFavoriteAccount label, and my new row gets added, the app stops at the following line in my DataSet.Designer
[global:ystem.Diagnostics.DebuggerNonUserCodeAttribute()]
public byte FavoriteAccount {
get {
try {
return ((byte)(this[this.tableBankAccount.FavoriteAccountColumn]));
}
catch (global:ystem.InvalidCastException e) {
//Stops at the following line, this error was caused by 'if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)'
throw new global:ystem.Data.StrongTypingException("The value for column 'FavoriteAccount' in table 'BankAccount' is DBNull.", e);
}
}
set {
this[this.tableBankAccount.FavoriteAccountColumn] = value;
}
}
I have no idea what I am doing wrong, all of the code I used I retreived from Microsofts help documentation included with VS2008. I have tried used my TableAdapter.Insert() method and it still failed when it got to
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
in my refreshDatabase() method it still failed.
When I look, the data has been added into the database, it's just when I try to retreive it now, it bails on me. Am I retreiving the information wrong?
Thanks for any help you guys can offer.
Johnathon
View 1 Replies
View Related
Mar 12, 2007
Hi
Can anybody guide --
how to send the message to the user connected to SQL server 2005 on lan
thanks
View 1 Replies
View Related
Aug 21, 2007
Hi
I have basic knowledge of SQL Server and Expert in MS Access
Know I want to change my Access Database into Database.
Now what i required is when I create any Procedure
then we use a condition helping keyword 'Where'
No what I required is when I execute any procedure using where clause It must open a Input Box where I put a condition
For Example
when I create a procedure like this
create Procedure prc_Demo
(
a int,
as
Select * from employee where emp_id = 'a'
)
Something like that So I want when I execute this then there must be open a box where I type emp_id then it show matching the result
How can it is possible
Thanks
Ashish
You Have to Loss Many Times to Win Single Time
View 11 Replies
View Related
Jan 15, 2008
Has anyone encounterd this message in the sql log:
-----
BACKUP LOG WITH TRUNCATE_ONLY or WITH NO_LOG is deprecated. The simple recovery model should be used to automatically truncate the transaction log.
-----
DB's are in simple recovery mode and only a daily backup is being done on DB's. It almost seems that SQL is doing something internally.
thanks
View 1 Replies
View Related
Feb 5, 2007
hi everybody
i m using dynamic connection in rdl file firstly i m showing username and pwd . after this user name and pwd i make a connection string for my report. when i m entering invalid pwd, than report generate an error. and stop. is there any way by which i can trace error and flash a message box to user about his invalid user name or pwd.
thanks
View 1 Replies
View Related
Jul 11, 2006
I sent a message from Server A to B. I didn't end the conversation. The message is stuck in sys.tranmission_queue with no error message (empty) . the initiatorQueue is empty (no records). why doesn't the message get sent ?
View 3 Replies
View Related
Feb 20, 2007
We are running transactional replication on sqlserver 2000 and I see the following message: "The initial snapshot for article reason_type is not yet available" Followed 10 minutes later by a "timeout expired" event (we see lots of these). I see no reason for a snapshot to even be running at 3:04 AM but then, it apparently was so what can I say. The Snapshot agent history does not show any entries for the last year so that is a bit of a mystery. The table in question seems identical at both the publisher and subscriber (including content).
Any ideas why this message would appear? It appears that a snapshot for this article was somehow involved but I thought a snapshot was only created by specific request.
Thanks.
View 1 Replies
View Related
Mar 29, 2006
I have a service broker service and there are multiple clients that can put messages in the queue of that service. How do I check which message comes from which client? There is no field in the queue like message_senderId or something like that.
View 1 Replies
View Related
Oct 1, 2006
Hi,May I know how can I show an error message in aspx page when I hit a transaction error in sql server 2K? Thanks Levine
View 5 Replies
View Related
Oct 19, 2007
I have a SQL Express database on our server that is used for one of our websites when the website tries to write to the database I get the following error: -
An attempt to attach an auto-named database for file D:lahwebsitesGiants North Walesapp_datadatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
This error is very frustrating and I really can't find a way around it. I have done the following: -
Deleted the SQL Server Express folders under user preferences
View 3 Replies
View Related
Feb 29, 2008
Hi,I am trying to write some C# ASP.NET 2.0 code. I have created a web form to send data to my sql server 2005 database. When I compile the application and insert data then click on the submit button I get this error
"A first chance exception of type
'System.Data.SqlClient.SqlException' occurred in System.Data.dll" I have been trying to solve this for a few days now with no luck, so any help would be appreciated. I'll post below the source code of the web form (addOrder.aspx). It might be worth mentioning that I have created another web form in the same project called addCustomer.aspx. Like addOrder.aspx it is a web form, however it successfully inserts data in the database. 1 <%@ Page Language="C#" MasterPageFile="~/Default.master" Title="Add Order Page" %>
2 <%@ import namespace="System.Data.SqlClient" %>
3 <%@ Import Namespace="System.Data" %>
4 <%@ Import Namespace="System.Web" %>
5 <%@ Import Namespace="System.Configuration"%>
6 <%@ Import Namespace="System.Globalization"%>
7
8 <script runat="server">
9
10 protected void Page_Load(object sender, EventArgs e)
11 {
12
13 }
14
15 protected void sumbitButton_Click(object sender, EventArgs e)
16 {
17 SqlConnection conn;
18 SqlCommand comm;
19 string connectionString =
20 ConfigurationManager.ConnectionStrings[
21 "ShippingSystemConnectionString1"].ConnectionString;
22 conn = new SqlConnection(connectionString);
23 comm = new SqlCommand(
24 "INSERT INTO Order(CustomerID, " +
25 "NumberofItems, DescriptionsofItems, SafeItems) " +
26 "VALUES (@CustomerID, " +
27 "@NumberofItems, @DescriptionsofItems, @SafeItems)", conn);
28 comm.Parameters.Add("@CustomerID", System.Data.SqlDbType.Int);
29 comm.Parameters["@CustomerID"].Value = int.Parse(DropDownList1.SelectedValue);
30 comm.Parameters.Add("@NumberofItems", System.Data.SqlDbType.Int);
31 comm.Parameters["@NumberofItems"].Value = numofitemstxt.Text;
32 comm.Parameters.Add("@DescriptionsofItems", System.Data.SqlDbType.VarChar);
33 comm.Parameters["@DescriptionsofITems"].Value = descofitemstxt.Text;
34 comm.Parameters.Add("@SafeItems", System.Data.SqlDbType.VarChar);
35 comm.Parameters["@SafeItems"].Value = safetxt.Text;
36 try
37 {
38 conn.Open();
39 comm.ExecuteNonQuery();
40 Response.Redirect("Success.aspx");
41 }
42 catch
43 {
44 }
45 finally
46 {
47 conn.Close();
48 }
49 }
50
51
52
53 protected void CustomerIDList_SelectedIndexChanged(object sender, EventArgs e)
54 {
55
56 }
57 </script>
58
59 <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
60 <table style="position: static">
61 <tr>
62 <td style="width: 169px">
63 Customer ID:</td>
64 <td style="width: 100px">
65 <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1"
66 DataTextField="CustomerID" DataValueField="CustomerID" Style="position: static">
67 </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ShippingSystemConnectionString1 %>"
68 SelectCommand="SELECT [CustomerID] FROM [Customer]"></asp:SqlDataSource>
69 </td>
70 <td style="width: 178px">
71 </td>
72 </tr>
73 <tr>
74 <td style="width: 169px">
75 Number of Items:</td>
76 <td style="width: 100px">
77 <asp:TextBox ID="numofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
78 <td style="width: 178px">
79 <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="numofitemstxt"
80 ErrorMessage="Number of Items Required" Style="position: static"></asp:RequiredFieldValidator></td>
81 </tr>
82 <tr>
83 <td style="width: 169px">
84 Descriptions of Items:</td>
85 <td style="width: 100px">
86 <asp:TextBox ID="descofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
87 <td style="width: 178px">
88 <asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ControlToValidate="descofitemstxt"
89 ErrorMessage="Description Required" Style="position: static"></asp:RequiredFieldValidator></td>
90 </tr>
91 <tr>
92 <td style="width: 169px">
93 Are Items safe:</td>
94 <td style="width: 100px">
95 <asp:TextBox ID="safetxt" runat="server" Style="position: static"></asp:TextBox></td>
96 <td style="width: 178px">
97 <asp:RequiredFieldValidator ID="RequiredFieldValidator5" runat="server" ControlToValidate="safetxt"
98 ErrorMessage="Are Items Safe?" Style="position: static"></asp:RequiredFieldValidator></td>
99 </tr>
100 <tr>
101 <td style="width: 169px">
102 <asp:ValidationSummary ID="ValidationSummary1" runat="server" Style="position: static" />
103 </td>
104 <td style="width: 100px">
105 <asp:Button ID="sumbitButton" runat="server" OnClick="sumbitButton_Click" Style="position: static"
106 Text="Submit" /></td>
107 <td style="width: 178px">
108 </td>
109 </tr>
110 </table>
111 </asp:Content>
112
113
My order table in SQL server 2005 (express) looks like this:
View 5 Replies
View Related
Jan 27, 2004
Hello-
I have the following sql statement which produced an error when I add the order by clause
SQL = "SELECT DISTINCT nc_department.department, Count(nonconformance.department_id) as 'events', ISNULL(SUM(nonconformance.nc_wafer_qty),0) as wafers FROM nc_department LEFT OUTER JOIN nonconformance ON nc_department.department_id = nonconformance.department_id WHERE nc_department.active = '1' GROUP BY nc_department.department ORDER by nc_department.order_id"
This is the error I get:
ORDER BY items must appear in the select list if SELECT DISTINCT is specified.
Any help appreciated
View 10 Replies
View Related
Apr 23, 2004
I'm catching a primary constraint error in SQL and don't want to return the SQL error message back to the client. Is there any way to stop this. Thankyou
View 5 Replies
View Related
May 21, 2004
I need help on this!
When I try to change the data from a table using Web Matrix, then I get this error message.
The table’s data cannot be edited because the table does not contain modifiable columns.
As I need to edit the data’s, how can I solve this?
Thanks for Your Help
Mikel
View 1 Replies
View Related
Sep 8, 2004
I finally installed MSDE and have the icon in my tray at the bottom of the screen.
When I try to connect to a database using the wizard in the web matrix program I get this message:
Unable to connect
SQL Server does not exist of access denied
Connection Open (Connect ())
What might be wrong??
Thanks for your help I'll get it soon (I hope)
Del Dobbs
View 2 Replies
View Related
Dec 17, 2004
HI FRIENDS
WHEN I TRY TO RUN A PROGRAM WHICH BINDS A DATAGRID CONTROL TO A SQL SERVER TABLE I GET A ERROR MESSAGE LIKE [SQL EXECEPTION LOGIN FAILED FOR HOMECOMPUTER/ASPNET] . IF U KNOW WHAT MIGHT COZ THE PROBLEM PLEASE TELL ME.
IAM RUNNING THE MICROSOFT SQL SERVER FORM MY HOME COMPUTER I.E (LOCAL) . IS THERE SOME SETTINGS THAT I NEED TO DO BEFORE RUNNING A PAGE WHICH CONNECTS TO THE SQL SERVER.
View 2 Replies
View Related
Jun 13, 2006
I am trying to set a text field as the primary key for a SQL SERVER Express 2005 Database in Visual Studio. I used the following Command:ALTER TABLE Tablename ADD PRIMARY KEY (fieldname);where you substitute table name and fieldname for the appropriate fields. The error message I am getting is:SQL Execution Error.Executed SQL statement: ALTER TABLE Lake ADD PRIMARY KEY(wbic);Error Source .Net SqlClient Data ProviderError Message: Column 'wbic' in table Lake is of a type that is invalid for use as a primary key column or index.Could not create constraint. See previous errors.How can I fix this so any type of field can be a primary key?
View 7 Replies
View Related
Feb 7, 2002
I am extracting data out of Lotus Notes into an Oracle DB using EM.
I keep getting an error "[Lotus][ODBC Lotus Notes] Data value is not a valid date, time or timestamp" I went ahead and dropped the destination table, and changed all of the "date" columns to varchar's, redefined the transformation, and executed package again, but still get the error. Any ideas?
Thanks!
BV
View 1 Replies
View Related
