I have a simple message board made of four main tables (Forums, Threads, Posts, and Members), and I need to build a query that runs on each forum, giving me the number of threads in it, and the total posts, plus information on the last post made on that forum. I managed to pull out the first two pieces of info, but I couldn't get the last post stuff right. I tried a number of combos without much success. Here is a brief description of my tables layout:
Forums
FORUM_ID int <= Primary Key
Name nvarchar(50)
Threads
THREAD_ID int <= Primary Key
FORUM_ID int (owner forum)
Subject nvarchar(64)
Posts
POST_ID int <= Primary Key
THREAD_ID int (owner thread)
MEMBER_ID int (owner member)
Body ntext
PostTime smalldatetime
Members
MEMBER_ID int <= Primary Key
FullName nvarchar(50)
Here is the query I have so far:
SELECT Forums.FORUM_ID, Forums.Name, COUNT(DISTINCT Threads.THREAD_ID) AS ThreadsCount,
COUNT(Posts.POST_ID) AS PostsCount
FROM Posts INNER JOIN
Threads ON Posts.THREAD_ID = Threads.THREAD_ID RIGHT OUTER JOIN
Forums ON Threads.FORUM_ID = Forums.FORUM_ID
GROUP BY Forums.FORUM_ID, Forums.Name
and now I'd like to get the following info: POST_ID and PostTime of the most recent Post in the Threads belonging to Forums, plus the FullName of the Member who sent that post.
I was able to get the PostTime of the recent post by simply adding a "MAX(Posts.PostTime)" to the select statement, but that's not enough. I need to fetch more columns from Posts, and eventually join to the Members table... and that's where I got lost...
Appreciate any pointers, and sorry for the lengthy post...
I want to be able to see when records have been added to a table. The issue is we have a DTS job scheduled to run every night. The developer who wrote it password protected it and doesn't work here anymore. I want to add a step to this series of DTS jobs and want to run it just prior to his job. Is there a way to see when the records are being added or when this job is being run? Thanks again, you guys are the best.
Our company plans to redesign the forum. we currently stores all posts in text files. someone suggest that we can use xml. I am not familiar with using xml. Is XML better for the forum design and data retriving?
Can anyone tell me , For instance : if someone has posted new post and If I want to answer to that post, how can I answer that. Or How do I know that there is some new post which people can response to it, please give me your feed back on this
Where is the list for forums, When i started to write for Sqlserver, i never searched or looked for forum. Same did when i was working with the c#. Now I have to find the correct forum. So where is the list of those forums, thanks.
I have had countless email alerts thru today alerting me to people replying to threads I have commented on. And I can see the person's comments.
1) WhenI click on the link it takes me to a page saying the post doesn't exist
2) When I try and browse to the thread manually I can't see the reply.
3) On one occasion I replied to one of these threads asking if someone had posted something and then deleted it. After I submitted the post I could see all the other posts in the thread which were supposedly missing before. The next time I browse to the thread (in a new browser window) I can't see any of the posts.
BROKEN!!!! I for one won't be coming back here until they fix it. Its pathetic.
I have posted something on the bug report forum by the way.
Our website provide users with a forum where they can enter messages. So, typically, a user would enter a message, click submit, and their message would be displayed on the forum.
The db that stores these msgs uses a varchar field. Now, we're adding a facility to convert any urls that are entered to links by adding 'a href' tags, so that when users see messages with urls, those urls appear as links, and they can click on them. The problem is that if a user enters a message of 8K chars, then we add 'a href' tags to any urls they have, that makes the message length > 8K, preventing us from storing it in our db. (Please note that we do need to add HTML tags for other reasons as well, not just to convert urls to links.)
We thought about adding 'a href' tags during pre-render, thus avoiding storing html in the db, but found that doing such string manipulations, while a user is waiting to see their post displayed on the forum, was expensive. Timing tests revealed that the time to render such pages more than doubled.
I have solved such problems previously by adding an extra field in the db to store any overflow data, that is, data that appears after the first 8K chars.
However, I learnt of sql server 2005's varchar(max) datatype, and 'am wondering if the best way to solve this problem would be to replace the varchar field with varchar(max).
i have a main pallet inventory table, kinda like: key location sku qty datercvd1 W9A03 12345 500 5/5/072 W9A04 12345 500 5/5/073 W9A05 12345 500 5/5/07 Now, if i say:Select loc,sku,qty,datercvdFrom TableWhere sku=12345 it works great, now say my order only requiers 700 of that sku,I only want to pull pallets that i need, how can i say:Select loc,sku,qty,datercvdFrom TableWhere sku=12345 (that qty summed is not more than 700?) not sure if i can or how to make it like a formula. Thanks in advance. Jeff
I have got MSSQL 2000 set up on a machine in my rack at my local telehouse, and a web server set up at home on an ADSL line.
Both servers can see (ping) eachother fine , so you can rule out any kind of connectivity issues straight away, but when i try to get my forum to connect to the mssql database using the correct credentials it just fails saying that the credentials are incorrect ot the server does not exist.
I also installed an SQL database tool on my web server (Shusheng SQL Tool) and attempted to connect to my SQL server using that tool, and got the following message: '[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.'
The server is currently using mixed mode authentication (SQL/Windows) and has both TCP/IP and Named pipes enabled.
Is there some kind of 'Enable remote connections' option in SQL? I need to be able to allow connections to my SQL server from any system, anywhere...
I'm just about to launch a forum, and right now its built in ASP classic with an Access db. I origianlly used Access because most hosts charge extra for MS-SQL server. Recently I switched to Jodohost who offers Access, MS-SQL and MySql for at no additional cost. So now that I have the option, I would like to pick the best solution before I launch.
* My questions are...
- What is the best db solution to go with for a currently small forum?
- How problematic do you think a data migration would be in the future if I stayed with Access for now and upgraded to MS-SQL with a full forum?
- Is it just smarter to go with MS-SQL now, with an empty forum, regardless of any preformance issues because potential migration problems are a greater risk?
- At what point does the speed of MS-SQL at high volumes over come the potential lags in accessing MS-SQL if it is hosted on a different machine from the one hosting the webpages?
* And please keep in mind...
- I have no db training. I can muddle through Access well enough, but administrating MS-SQL I think might be another story
- This fourm will start off very small, but could grow to be quite large
- I may not stay with jodohost, and would therefore likely have to pay more for MS-SQL (which I woudl rather not do)
I'm creating a discussion forum for my website, using Sql Server 2000. I need to display 'Number of threads', 'Number of posts', 'Last post by' (username/id and date) for each forum, and 'Number of replies' and 'Last post by' (username/id and date) for each thread.Here are a couple of ideas I have come up with to solve this problem:1) Poll the database (using a stored procedure that returns the number I'm looking for) for each forum when I loop all the fourms. - I suspect this approach isn't optimal, since it creates more traffic to the database.2) Have fields in my Forum and ForumPost tables for 'Number of threads' and so on. Now, create triggers that updates these fields every time a post is made. - I guess this would be much more effective than the first apporach, since everything is done on the database server directly.Are there any other ways that are better? Please advice! Thanks a bunch for any help!
I have been helped greatly by people in this forum for SQL7, but I have some questions about 2000. Is this a place where 2000 is being discussed at all? If not I would appreciate someone pointing me in the right direction.
i am building a forum in asp (just for fun). i have a mssql 2005 server, and i want to mergeimport data from another mssql 2000 server. but i dont know how to do it correctly.
i have some tables like this [forum_c] forum_c_id (PK, int, not null) forum_c_name (varchar, not null)
[forum_sc] forum_sc_id (PK, int, not null) forum_sc_cid (int, not null) forum_sc_name (varchar, not null)
etc...
forum_c meaning "forum categories", and forum_sc "forum sub categories". forum_sc_cid has the value of forum_c_id to know to what categorie it belongs to.
but i dont know how to import it and keep the correct id's. can somebody please tell me what i need to do???
When running practically any report in FRx (we use it to generate reports in Solomon) we are getting the following error:
FRx Reporting Engine:
01000: [Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.
This just recently started happening. Is anyone familiar with this? It doesnt give much information after that, it just will not generate the report after the message pops up.
SQLTeam.com SQLSERVERCENTRAL.com TekTips.com MSDNSQL Forum forums.sqlmag.com
I hate to ask for information such as this but with the low response to my questions I was wondering anyone knows of a better site for SQL Server database mail issues?
Just lately I have noticed that I am periodically getting signed out of this forum. When I try and sign back in I get directed to an error page saying:
We apologize, but an unknown error has occured in the forums.
This error has been logged.
I would say this has been happening for a couple of weeks now at least.
Forum db access problem I am doing a forum db job. There are two tables: ThreadInfo and ThreadReply. One is used to store the basic info of threads, and the other one is used to record the changes of threads€™ reply info from time to time. I am using jdbc to connect to the sqlServer. The connection is successful. The codes are listed below.
However an exception happened in executing the first sql code. com.microsoft.sqlserver.jdbc.SQLServerException: No ResultSet object is returned. But the info has been recorded in ThreadInfo. As for the exception,the thread immediately goes into the Catch block. And the info is not recorded in table ThreadReply.
I have 2 options to implement a very simple web forum. Which one is better??…..
The first approach is as the following: -create a Posts table which will contain all posts. - create a replies table which will contain all replies. - The relation between Posts table and replies table is ONE to MANY
Advantages of this approach: - It follows the rules of normalization. - It avoids null values which will accrued if all replies and posts where stored in 1 table.
Disadvantages of this approach: - When it comes to implementing the search operation and data retrieve against posts table and replies table, I will need to run 2 different queries which means 2 connection to my SQL database. This means a slower execution and round trip to my SQL database.
The second approach is as the following:
- Create one table which will contain all posts and replies.
Advantages of this approach: - one query will be executed, which means faster execution than the first mentioned approach - it avoids round trip to my SQL database which happens in the first mentioned approach
Disadvantages of this approach: - It does NOT follows the rules of normalization. - You will end up with null values (for example the post title field will be empty when inserting a reply.)
First off, can you post .dtsx packages to the forum? I always end up cutting and pasting code, which is by is nature incomplete, as it generally has external dependencies (connections, variables).
Perhaps you cannot do so for security reasons?
Second, is there a good blog site that allows you to post .dtsx packages?
I'd rather post .dtsx links than cut and paste code (which half the time formats the code un-recognizably), or even worse, post package xml, which contains the layout information and possibly IL that makes it all but unreadable.
I just got the bellow error twice: "The post you requested cannot be found or no longer exists. The administrator or moderator may have deleted the post."
Am I the only one that see this? or is it a know problem.
Is there a forum moderator that can check this out (I didn't saw any contect options on this page).
There was a tool some time ago called Microsoft English Query, it was part of MS SQL Server 2000. However, as I read recently they discontinued it and new SQL Servers 2005/08 don't have it.
Does anybody have a information about that tool, whether it is offered by Microsoft as stand-alone tool, or maybe a part of some other software ?
I tried to search this site but could not find anything about it.