Gurus,
When I am in Maintenance mode, The users are trying to hit the database. I want to throw some message when they are trying to hit the database while it is in maintenance mode!! Is it possible..?
If possible, please help me to solve my problem.
Thanks
Krishna
I have a db maintenance plan which is set to backup (then truncate hopefully)the transaction log. In order to backup a transaction log the db must be insingle user mode so the maint. plan fails. How do you automatically set the db,in single user mode, for the transaction log to be backed up then truncated?Also, I manually set the db in single user mode and it shows itself to be insingle user mode yet the number of users in the db properties says there are 8users connected. What's this about?ThanksMark
View 5 Replies View Related
Hi,
I've small issue with SQL 2005 SP2. We have migrated database from another server with backup/restore procedure. Seems that db is properly set with cmp level 7.0. We are using standard maintenance plan for all SQL 2005 servers with option "backup all user databases", to have less work. Now it seems that dbs in SQL COMPATIBILITY LEVEL 7.0 cannot be backuped with Maintenance plan. They are not listed in the list of the databases and Maintenance plan is always reporting failure :
"Database '<DBNAME>' is not valid to be included in the maintenance plan."
Is there any way to fix this? Or can I safely switch db to CMP Level 8.0 at least?
Thanks for help
Hi All
I€™m having a problem setting up maintenance plans on one of our SQL 2005 servers but first here€™s a bit of back ground.
The server is a Virtual machine running win2k3R2 SP2 server std and SQL 2k5, A supplier arrived to install and app on the server when discovering there app didn€™t work with 2k5 they seem to have set the 2 dbs on the server into 2k compatibility mode and set the entire SQL install to think its a 2000 install. (I€™m not sure how this is done all I can see is the wrong version number in management studio) The problem this is giving me it that the folder in management studio for Database Maintenance Plans is no longer under the management folder instead it under a sub folder called Legacy (which is how management studio seems to deal with all registered 2000 instances) and as such a can no longer right click and create new database maintenance plans is there any way around this or will I have to setup my backup job manually?
Ohh and have the supplier shot at dawn
Thanks All
Jon
Exception ex.Message I am getting in debug mode calling AcquireConnection is much shorter than the logged message in run time because all the errors come to output window in debug. Is there any way to get all these errors description from exception object in debug time to be able to parse it?
Thanks.
I have SQL Server 2008 Standard and whenever I right click on Maintenance Plans and select New Maintenance Plan and I name the plan and click Ok. I get an error message that says Key cannot be null. Parameter name: key (mscorlib)
When I press OK on this message, I see an error message that says Microsoft SQL Server Management Studio is unable to load this document: Could not load type "Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSPackageSigning 100'from assembly 'Microsoft.SqlServer.DTSRuntimeWrap.
Version=10.0.0.0. Culture=neutral. PublicKeyToken=89845dcd8080cc91'.
What does this mean? What do I need to do to fix this?Â
Durning install I selected Window's Authentication only, but now it seems we may need to use a Mixed Mode with an SA account etc... is there anyway to switch SQL 2005 to use Mixed Mode after the fact?
View 1 Replies View RelatedWe have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
Hello,everyone!!
There is a query which when executed in the grid mode(ctrl+d) takes approx 0.02 seconds(about 21,000
rows) But when I execute in the text mode, it takes about 0.40 seconds!!
Why is this difference?
Also, when the records from this table are read from a VB application, they are equally slow (as in the text mode!)
Why is it so slow on the text mode & relatively faster in the grid mode?
Has anyone got any idea on ‘Firehose’ style cursor ?(which may speed up access of data in the VB application)
Rgds,
Adie
how to put sql server database in suspect mode intensely and  get it out from suspect mode to normal mode.
  i am using SQL server 2008 R2
Recently I read such statments 'When SQL Server is run in "lightweight pooling" mode (fiber mode) and the DTC service is started, unexpected behavior may occur.'
Can someone say anything about fibe mode?I am appreciated for it.:)
Hi,
Currently, our Report Builder is running on Local Intranet mode. I'm investigating what the security implications are in changing it to Internet mode. However, I've not been able to find any documentation on this.
Does anyone know of any documentation that addresses this issue or have experience that they can share with changing Report Builder security zone from Intranet mode to Internet mode?
Thanks very much.
Hello,
I have a question that I hope someone can clear up for me. I have come across a number of different suggestions on DB maintenance, for example reindexing with the following script:
USE DatabaseName --Enter the name of the database you want to reindex
DECLARE @TableName varchar(255)
DECLARE TableCursor CURSOR FOR
SELECT table_name FROM information_schema.tables
WHERE table_type = 'base table'
OPEN TableCursor
FETCH NEXT FROM TableCursor INTO @TableName
WHILE @@FETCH_STATUS = 0
BEGIN
DBCC DBREINDEX(@TableName,' ',90)
FETCH NEXT FROM TableCursor INTO @TableName
END
CLOSE TableCursor
DEALLOCATE TableCursor
My question is, doesn't the maintenance plan have this functionality inherent in it when you create the maintenance jobs to reindex? Is there a benefit to scripting things out vs just using the maintenance plan wizard for this sort of thing and any of the items it covers? I came from an Oracle background where this was a no-brainer but I am a bit confused on the choices with SQL Server.
Thanks.
Hi folks,
I have a SQL 2005 OTC. CTP version running on Windows 2003 server.
I would like to find out how the SQL server option changed to Windows Authentication mode from Mixed mode over the weekend. From the SQL log, I don't see when it changed. I would like to see Date/Time and client IP. If I can see User ID (windows) that would be great. Where I can find these info in SQL server?
Thank you in advance...
SHJ
In my SQL Server, I see the below message in the Application Event Viewer
"18265 :
Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."
When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:
" Can't find or load message DLL. Message DLL must be in path or in current directory."
Any thoughts to overcome this problem is appreciated.
Thanks
Santhosh
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?
Hello,
I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.
// Create an empty request message
string Msg = "Hello";
MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));
Message request = new Message("Request", body);
Thanks,
Scott Allison...
I am testing some maintenance tasks sql commands such as index rebuild, index reorg, update statistics and db integrity check on a SQL Server 2014 Database. This is a new non-production vendor database (DB Size 500 GBs, Log Size 25 GBs) which eventually will be created in production. Currently, it is in full recovery model and without log backups. The database has a whole lot of indexes. I am just trying to rebuild and reorganize all the indexes (that need it), in addition to trying to get an idea of how long these maintenance task will take and the space needed in the log file to complete these tasks/commands. I would like to execute these tasks manually (the first time) to gather the duration and space required information. Eventually, I would probably schedule a weekly job to perform this maintenance.
I ran the index rebuild task on the database and noticed that the log file grew by over 50 GBs. I killed the process and truncated and shrunk the log file back down.
1. Does the index rebuild, index reorg, update statistics and db integrity check commands all use the log file?
2. Does Indexs Reorg have less impact on log file then Index Rebuild?
3. Should a truncate log and shrink log file be performed after these maintenance commands?
4. Should a full database backup be performed after these maintenance commands? Or before the maintenance commands?
I have read and understand that shrinking is not good for the database (could lead to more fragmentation and more data file growth when data is added) and I know about rebuilding indexes when fragmentation is GT 30% and reorganizing indexes when fragmentation is GT 5% and LE 30%.
Since this is a non-production database maybe I should set the recovery model to simple, run the maintenance commands and leave the database in simple recovery model unless the vendor needs it in full recovery model for some unknown reason.
5. With the simple recovery model the log file should be reused in a circular manner and not grow during these maintenance tasks. Is this correct?
I have deleted a database from SQL Enterprise Manager. Anyone know a way to clear that database from my maintenance plan? I do not wish to just uncheck the deleted database or create a new database plan.
Thanks!
My index maintenance job that was setup through Enterprise manager database maintenance fails with the following notice. It ran great for several weeks then it started failing. Any suggestions!!
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Hi, anyone who administering the pretty big database not less than 30 Gb with the average number of rows in a table about 2M and more, please share you experience with maintenace of such a db. Esspecially i'm interesting in:
1) Indexes maintenance (When and how - just regular dbcc, maint. plan or some script to split the job twice and so on.)
2) Remove unused space from db. (not major)
The serever works 24*7, and it's transactional environment. SQL 7 sp3 on claster.
I run the sp. to rebuild all the indexes it takes about 2-3 hrs to determin the objects withfragmentation less than 80% and actually rebuilding, during this process the users experience the performance (specially for update/insert) problem. It looks like I need to change the plan or strategy to do this. Any thoughts appreciated!
Thanks in advance.
Dmitri
Hello All
I have been given a SQL Server 2000 database to look after which has been set up with a Database maintenance plan. The plan is set to backup the complete database and the transaction log. The backups are written to the local disk correctly but the plan is also set to remove any backup files (both database .BAK and transaction log .TRN) that are over one week old. Complete database .BAK files are written daily and the .TRN are written every hour daily. The .BAK files are removed ok automatically but the .TRN files are not - they are just slowly filling the disk. There does not seen to be anything different between the way the main database and the transaction log is set up in the maintenance plan.
I would be very grateful for any ideas
I am looking for opinions of setting up a database maintenance plan. I want to know if it is safe to trust the wizard and let it set up all of the jobs, or if it is better to write your own procedures to handle backups and maintenance as in 6.5. All sugestions and opinions are welcome. Thanks.
View 2 Replies View RelatedFor SQL server 7.0, is it necessary to schedule database maintenance plan on a regulare basis? I know it is necessary for SQL server 6.5.
Thanks.
Su Ge
I have a strange thing in one of our Maintenance plans.
On the first tab where you check which databases you're including in the plan I have (say my database name is CAT) a 'CAT' and 'cat' database listed and the one chosen is 'cat'. However my database in all other views shows up in all caps. (even when I do an sp_helpdb)
The backups look like they're working, etc. but it just seems weird. If I go to create a new plan it only gives me the one option 'CAT' which is really what's there. I'm new and I'm thinking the database at one time was 'cat' and this is when the maintenance plan was created. Then it was renamed to 'CAT' and there's the two db's showing in the old mainenance plan.
What would you do? Create a new plan with "CAT" and just get rid of the old one with the weird 'cat' and 'CAT'?
Any other suggestions or ideas on what happened..
ann
I've created a database maintenance plan to backup a database, but it just
isn't happening, am i missing something. The maintenance plan appears to be
created successfully.
responses appreciated.
thanks
Todd Minifie
SQL7: I have added a Maintenance Plan to backup to 4mm dat tape the master and msdb SQL databases as well as another database relative to our application called WISE. This works fine; however, it appears to always append to the media as opposed to overwriting (preferred). Any help would be appreciated.....
View 1 Replies View RelatedHi,
I am going to set up maintenance plans on all our SQL servers (7.0 and 2000). I have found several 'tutorials' on how to do this, but no one is describing the options in detail. Can you guys/gals please help me out? We have alot of small databases and some medium (1-2GB).
Thanks//Stefan
Help !!
I am running a database of 500-600mb 20-30% of which is new data daily (5 day old data being deleted as part of the nightly maintenance) And my nightly maintenance is regularly taking an hour plus.
CheckDB, New Alloc, Catalog, re-indexing and dumps are performed nightly (2am ish) and as the system is in constant use I cannot afford such a long task. I can't use weekly dumps/checkDB as we use transaction log replication and these are dumped every minute. I really need some suggestions on how I can improve matters. The deletion of old data in particular is taking a long time due to the use local variables but is there a faster way to do this :
OPEN tnames_cursor
FETCH NEXT FROM tnames_cursor INTO @connectionid
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status <> -2)
BEGIN
Select @dRent = DeliveredRetention from ControlDB..connectiontable
where ControlDB..connectiontable.Cid = @connectionid
Delete from MyDB..Table where Cid = @cid
and DateDelivered != NULL
and Datediff(hh,MyDB..Table.DateDelivered,getdate()) >= (@dRent*24)
END
FETCH NEXT FROM tnames_cursor INTO @connectionid
END
DEALLOCATE tnames_cursor
GO
These jobs have also started running out of locks and deadlocking on occaision which seems odd as the system has 10000 available (escalating at 2000)
Any Suggestions would be very much appreciated
Damon
hi,
I have SQL 2000 ProductionBox.It is in 24x7 environment.
We need to maintain data only for 30 days.
Even if I schedule deletetion of data on daily basis - SQL will take the lock as data we receive is too huge.
Secondly,Since the indexes are heavily used - defrag don't work for them.the only option I think I am left with is to rebuild the indexes.Though in SQL2K - index creation is on fly - but here we are talking of table sizes of 8-10GB.
I suggested my Boss to bring down the box for few hours for maintenance.but he insists that since this is 24x7 - Box can never be brought down.
I am finding it hard to convice him and do my job.
Any idea on how to rebuild the indexes & how to delete this many records(avg.50k per day-data of xml type)without creating a block is highly appreciated...or how to convince my boss to give me a window for maintenance...:)
TIA
SQLMaint is run once a week for the following a database on SQL 6.5. The following is the information for the database when I see it through the Enterprise Manager:
Data Size 650 MB
Data Space Available 0.00
Log Size 360
Log Space Available 359.99
The following is the syntax built by the DATABASE Maintenance Wizard:
SQLMAINT.EXE -D CATS -CkDB -CkAl -CkTxtAl -CkCat -UpdSts -RebldIdx 100 -Rpt E:MSSQLLOGCATS_maint.rpt
It runs once a week and takes about 40 mins and runs successfully. Last it run was 4/11/99 at 2:00 AM
The result set I get from sp_spaceused is as follows:
database_name database_size unallocated space
CATS 1010.00 MB 273.96 MB
reserved data index_size unused
------------------ ------------------ ------------------ ------------------
753710 KB 280360 KB 426494 KB 46856 KB
What I don’t understand is how come the data space available shows 0 in Enterprise Manager? Shouldn't SQLMAINT, which is run once a week, allow for correct information to be reported?
Could someone please explain.
Thanks
Shashu
Hello,
I am just getting started with SQL 2000 Server, and we have our database online, and starting transfer all the data from ACCESS to SQL 2000.
Need to know what type of maintenance I need to do to keep the data clean on SQL.
Any help would be appreciated.