Hi All,
Is there a way to suppress or re-direct the messages that result from a tran. log dump? We're running a tran. log dump every 15 minutes in prod. and the errorlog is really cumbersome to look at.
(In another RDBMS I worked with all backup messages went to a separate error/message log.)
TIA!
What is the advantage of taking frequent tran log backups (say every 30mins) as opposed to once a day? Say, I backup data and tran log once every night and I lost a table at 10:00am next day. Can't I recover the database to the point in time by restoring the previous night's backup and then applying the transaction log from previous night and then applying the transaction log (to the point int time) that you just dumped when the mishap was reported to you?
Thanks
Running SQL Server 2005 Standard Edition.
Database is in Full Recovery mode.
I have full backups scheduled weekly, differentails scheduled daily and tran log ackups scheduled for every 15 minutes.
The tran log backups only work for the first 40 minutes or so after the daily backup. Once the daily has occured, the tran backups will work again, but for only 40 minutes.
I run consistency checks on the db daily and there are no errors.
The error returned from the tran log backup is 'BACKUP LOG cannot be performed because there is no current database backup'
Any thoughts would be appreciated.
The space allocated to the Log in question is 180 GB. During this time period I was running TLog backups every 5 minutes, yet the log continued to chew through to 80 GB used, even after the process was complete and a final TLog backup had been taken. It continued to stay very large until the Full backup was complete -- or something else that I'm unaware of completed. Like every other DBA I typically take a TLog backup to shrink the log, but what appeared to be the case here was the Full completed and it released the used log space. All said, will Transaction Log backups not free up the log during Full backups?
View 3 Replies View RelatedHi,
construir
build
© Webster's
I am programing a site in aspnet 2005
I contructed space from my host for my Database.
In the web.config I added a connection string with username and password <configuration>
<appSettings/><connectionStrings><add name="oseriConnectionString" connectionString="Data Source=sql2005.digiweb.com.br;
Initial Catalog=zzz;
User Id=xxx;Password=yyy"
providerName="System.Data.SqlClient"/>
and I have access to this database when I work on my station as well when I am working on line.
Unfortunately I also gained for free the ASPNETDB.mdf file...
The ASPNETDB is automaticaly created in the ~/app_data together with a web.config.
I use the following connectionstring:<add name="aspNetDBConnectionString" connectionString="Data Source=sql2005.digiweb.com.br;
initial Cataloge=htdocsapp_DataASPNETDB.MDF;
Integrated Security=True"/>
Working on my station I have access to the aspnetDB file, I can add users roles etc..
notice that I use ConnectionString to my provider!
My first question is whether I really load the information also to the file in my site Because on my station I can find the changes.
If the answer is no then do I load the file simply through the FTP ?
and how can I open the file in the provider side?
In any case when I run the site on line, trying to log in, I get an error message 26
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
If I insert a wrong password I get the same error message. Which means that I don’t have access to the file.
I definitely could use some help since from my provider I get none.
Thank you
Dov Kruman
I am running an Execute SQL task that does a Begin Tran, then the next task in the sequence is a data task which imports a XML file into two tables. If i doo a Rollback Tran only one of the two tables is rolled back.
Is it possible to have both tables rolled back from one Begin tran command or do i need to split the datatasl into two and treat each import as a seperate issue ?
The connection is set to retainsameconnection
thanks
PLEASE HELP...
WE ARE DOWNLOADING THE BACKUP FILE FROM OTHER BRANCH OFFICE AND THE FILE SIZE IS GROWING LIKE HELL SO I AM CHANGING THE BACKUP POLICY TO DOWNLOAD THE DIFFERENTIAL BACKUP FILES EVERYDAY. BUT EVEN THE FILE SIZE GROWS DAY BY DAY UNTILL WE TAKE THE FULL BACKUP THERE. SO I WANT TO TAKE A DIIFERNETIAL BACKUP AND THEN IMMIDIATELY A FULL BACKUP AT THE REMOTE SERVER END. SO MY NEXT DIFFERNTIAL BACKUP WILL HAVE THE DATA OF ONLY PREVIOUS DAY.
FOR THIS I AM SCHEDULING A JOB WHICH FIRST TAKES A DIFFERENTIAL BACKUP AND THEN IMMIDIATELY FULL BACKUP EVERYDAY AT 12.00AM.
BUT I HAVE A CONCERN.. WHILE TAKING THE DIFFERENTIAL BACKUP ANY TRANSACTIONS THAT ARE TO BE COMMITED WILL NOT COMMIT UNTIL THE DIFFERENTIAL BACKUP COMPLETES. BUT IMMIDIATELY I AM STARTING FULL BACKUP. IS THERE ANY CHANCE THAT A TRANSACTION GETTING COMMITTED IN BETWEEN THESE TWO STEPS. IF SO IS THERE ANY WAY .. NOT RELEASE THE DATABASE UNTILL THESE 2 BACKUPS ARE COMPLETED?? I AM RUNNING IT AS A JOB..
ANY SUGGESTION??
THANKS IN ADVANCE.. :-)
KUMAR
I have daily scheduled full backups of each database and log backups scheduled for every 2 hours. My question is should they be scheduled for overwriting or appending? I have always had them set as overwrite, but I don't know if that is correct? Any recommendations would be appreciated
View 2 Replies View RelatedDoes the full and differential backups have to be in the same location or can I do a once a week full backup on one drive and everyday differential backups on a different drive?
Thanks
Hello,
I have MS SQL 2005 server with 300+ databases on it. The application is set up that way that it creates a new database as needed (dynamically). Do not ask me why - I hate this design... So, it can create 3-4 databases a day (random time).
I've scheduled full backup of all databases to run once at night, and it runs just fine. Besides that, I have scheduled tran logs backup of all databases to run every hour. This backup fails from time to time with the following error:
Executing the query "BACKUP LOG [survey_p0886464_test] TO DISK = N'D:\backups\log backups\survey_p0886464_test_backup_200708072300.trn' WITH NOFORMAT, NOINIT, NAME = N'survey_p0886464_test_backup_20070807230002', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "BACKUP LOG cannot be performed because there is no current database backup.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
So, I think what happens is since my full backup of all databases are scheduled to run only once at night, and tran logs every hour, when new database is created during the day, there is no full backup for it, that is why tran logs backup fails. Becuase after the failure, if I run full backup again, then tran log runs just fine afterwards.
I am new to MS SQL Server, I am mostly working with Sybase IQ. Do you know if I can "trigger" full backup every time when new database created to avoid tran lof failure?
Or is it possible to schedule full backup to run if tran log backup fails?
Any advice will be much appreciated.
Has anyone seen this before?
Every Sunday morning (a different time each week) there is a full backup created for every database on the server. The backup is not a scheduled backup from any maintenance plan or SQL Agent job. The backup set is unrestorable and has a strange name in the format of 'DBNAME_00_12c95fb7_399d_41ce_9a0d_b5728b6a00ba_'
Because this backup is listed as the last full backup and will not restore, it is causing a problem with our disaster recovery plans as nothing will restore from this point forward to the next full backup.
Does anyone know how a backup record like this can get created, and/or how to find the source. The backups are listed in the backupsets table in msdb - are there other system tables that may hold some clues as to the source of these backups?
Any help or direction would be appreciated.
Thanks
I make two full backups on Oct 1 and Oct 10. I want to restore the server to a state in Oct 5. So I just do as follows:
1.Perform a transaction log backup on the server on Oct 23. I have never backup transaction log in the past.
2. Restore the server with Oct 1 full backup with NORECOVERY option.
3.Try to restore to the point at Oct 5 12:00, with the transaction log.
But the restore fails and SQL Server said the transaction log does not contain the point. The point is too early. Why? Also my .LDF file is about 13G, but the transaction log backup is only 200MB. Why?
In what scenario – diff and full backups have same size? My guess is excessive fragmentation, any thoughts?
------------------------
I think, therefore I am - Rene Descartes
But i have one issue bothering me, it will be great if someone can help me out on this
1. I take full backup on Monday 8 pm which ends at 9.30 PM
2. Diff Backup starts at 10 PM every 2 hrs till Tuesday 7.59 PM
3. Transactional Log backup is happening every 10 min till tueday 7.59 PM
Now when i restore it in the same order i get error that Log in the set is too late to apply. I have recemmonded by team to stop log backup on the time they start full backups and take transactional log backup only after differentials are restored. Now is this a correct suggestion???
Also appendin the differential backup is a good idea or overwriting them is a better approach if Database is backedup every night and Differential occurs every 2 hrs.
I am running a full backup quarterly using "with init" to overwrite the existing file if it is still on the server. Then I run a differential back weekly using "with init". Finally I run a transaction log backup nightly using "with init".
My question is should I be using "with init" for the transaction log backup or allow it to accumulate until the next differential backup?
Hi sql server experts.
This is a beginners question.
Let's say, I run a full backup at 4:30 am it takes usually 35 minutes to finish.
I want to schedule a differential backup to run every hour.
Should I start this job at 5:10 after the full backup finishes? or it doesn't matter?
I am confused about timing.
Let's say my full back up takes 1 hour to finish, that means that when the differential backup runs the full backup will be still running, so in case I need to restore the database, can I use this differential from 5:10 or the differential from 6:10.
Same issue with the transactional, the job runs every 30 minutes, should I started after the differential is done?
I am so confused, what happens with the backups jobs that run while other backups are running?
Is this something that should never happen.
Please advise.
Thanks
We have a SQL 2012 server instance that has log shipping set up to another SQL 2012 server to provide a warm standby for a forward facing application. The databases on the primary server occasionally are required to be backed up and restored to a development environment, completely different server. Is there a way to schedule full backups with log shipping enabled?
View 2 Replies View RelatedI am in plan to implement following for backup of one of our database Enable Full recovery mode
1- Create full backup nightly
2- Create transaction log backup after every 25 min
as I am taking full backup every night, I think I can remove transaction log file backups at the time of full backup, as we can apply transaction log backup over full backup.My question is regarding removal of transaction log backups.
-Should I remove all transaction log backups and then execute full backup?
-Should I execute full backup and remove all transaction log backup older than 24Hrs ?
-Do I have to consider SCN or related info before deleting any transaction log backup ?
I make two full backups on Oct 1 and Oct 10. I want to restore the server to a state in Oct 5. So I just do as follows:
Â
Perform a transaction log backup on the server on Oct 23. I have never backup transaction log in the past. Restore the server with Oct 1 full backup with NORECOVERY option.Try to restore to the point at Oct 5 12:00, with the transaction log.
Â
But the restore fails and  SQL Server said the transaction log does not contain the point. The point is too early. Why? Also my .LDF file is about 13G, but the transaction log backup is only 200MB. Why?
Hi,
I want to rollback my t-sql if it encounters an error. I wrote this code:
begin tran mytrans;
insert into table1 values (1, 'test');
insert into table1 values (1, 'jsaureouwrolsjflseorwurw'); -- it will encounter error here since max value to be inputted is 10
commit tran mytrans;
I forced my insert to have an error by putting a value that exceeds the data size. However, I didn't do any rollback. Anything i missed out?
cherriesh
I make two full backups on Oct 1 and Oct 10. I want to restore the server to a state in Oct 5. So I just do as follows:
1.Perform a transaction log backup on the server on Oct 23. I have never backup transaction log in the past.
2. Restore the server with Oct 1 full backup with NORECOVERY option.
3.Try to restore to the point at Oct 5 12:00, with the transaction log.
But the restore fails and SQL Server said the transaction log does not contain the point. The point is too early. Why? Also my .LDF file is about 13G, but the transaction log backup is only 200MB. Why?
Afternoon,
I have a few Log Shipped DBs that are working great.
Currently they are set to fire off every 15 minutes 24/7.
My question is this ... I need to get FULL backups of the source DBs in order to restore them on certain Dev boxes.
If I were to execute the full backup on one of these Log Shipped DBs ... how would it affect the log shipping process?
Is there a special method to accomplish this?
As a side note, what would be some concerns/issues if in being able to create the FULL backups and not interupt log shipping, I were to create the backup using a 3rd party tool like Quest LiteSpeed?
I sure wish we were on Enterprise, then I could create a mirror and then snapshot off it to create my backups BUT ... that is not the case as we stand today.
Thanks
I am setting up Availability Groups and I want to use the secondary replica to perform the full copy_only backups to reduce the load on the primary replica.But what is the best way to check for successful full backups on Availability Group databases?
Previously I could check the system table msdb.dbo.backupset but this is not available for copy_only backups.So I wonder how people are monitoring that their full backups have been successful?
Do you just check that the SQL Agent job that runs the backup was successful?
Or do you search the SQL Server Error Log for entries like "Database backed up. Database: xxx" where database xxx is in an Availability Group?
Or is there a better method?
Regarding backups.
The first available time to do a full backup is at 11:00pm which also applies to diff. backups.
How often does the trans. logs need a back up?
Hi:
I have 30 databases on sql server 2005 that I need to do a full backup every morning at 7:00 and tran log backup every 30 minutes until 7:00 PM. If I create a maintenance plan for a backup using the wizard I have the option of starting a full backup at 7 am and then an option of doing tran log backups every hour using a different schedule. I plan on selecting the option to create a different folder for every database. I just need to confirm that in this way the way to restore the data would be
1. to restore a full backup
2. apply all the tran logs depending on the time they want to recover back to.
I just think this is the easiest approach to have 30 databases on the same backup scheme instead of creating a separate backup device for each database and doing a full backup on that device and appending all tran logs to that device which means just 1 bak file versus the above strategy with a number of tran log files. Please advise.
Thanks
Hello,
I have the following situation.
tempdb data file has 8Mb and log file has 1Mb - but I´m getting message that log is full.
Once tempdb is shrinked and expanded by the system (we even don´t see it at database folder!!), what can be done, (except reinstall from scrach and restore DBs) to make tempdb not vulnerable to very frequent expanding/shrinking (I guess this can be one of the root of the problem) ?
TIA
Massa/mig
Could anyone tell me how to check the size of the current msdb and tempdb log files and how do I deal with the following alerts :
Full msdb log Error 9002
Full tempdb Error 9002
Mnay thanks
Zahed
I am pulling my hair out trying to resolve this issue. I have placed several messages on different message boards and have not received any response to this issue. Can anyone here please help me?
I have installed 'full text index' on a server, initialized it and created a job to full text two fields in a table. I can see that the last refresh was a day ago. I am calling a stored procedure: (the server is version 7 of SQL Server with sp3)
CREATE PROCEDURE [SearchFaq]
@pSearchString varchar(200)
AS
SELECTfaqID, FaqQuestion, FaqText, Status, InputDate
FROMfaqs
WHEREContains(*, @pSearchString) and Status = 1
All I get is this error message, whether I call this from an asp page or run it directly from query analyzer:
Microsoft OLE DB Provider for SQL Server error '80040e14'
Search on full-text catalog 'etr_fts' for database ID 10, table ID 1429580131 with search condition 'faq' failed with unknown result (324bd27c).
Please HELP!!
Using Ola Hallengren's scripts I do a full backup of a database on a Sunday. Then differential backups every 6 hours and log backups every hour. I would like to keep a full week of backups based off the full backup done on Sunday. Is there a way for me to clear out the diff and log folders after the successful full backup on Sunday nights?
View 2 Replies View RelatedGreetings,
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
Thanks,
BCB
Hi,
I decided to use the SQL Server log provider to store logging data of all my Integration Services packages. I also created some reports about this data for operating purposes.
I have a problem occurs the name of the executing package is not always written to the log,but the name of the single task which failed. But that is not very useful information for operating, because I do not see any chance to get the name of the package by the information which is logged in the sysdtslog90 table in the database which I defined for SSIS Logging.
How do I configure the package to always log the package information into the table, too?
Best regards,
Stefoon
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies View RelatedI recently read the project real ETL design best practices whitepaper. I too, want to do custom logging as I do today, and also use SSIS logging. The paper recommended using the variable system::PackageExecutionId to tie the 2 logging methods together.
View 4 Replies View Related