Error: The Script returned a failure result. Task SCR REIL Data failed
OnError - Task SQL Insert Error Msg Error: A deadlock was detected while trying to lock variable "System::ErrorCode, System::ErrorDescription, System::ExecutionInstanceGUID, System::StartTime, User::FEED_ID, User::t_ProcessedFiles" for read access. A lock could not be acquired after 16 attempts and timed out. Error: The expression ""EXEC [dbo].[us_sp_Insert_STG_FEED_EVENT_LOG] @FEED_ID= " + (DT_WSTR,10) @[User::FEED_ID] + ", @FEED_EVENT_LOG_TYPE_ID = 3, @STARTED_ON = '"+(DT_WSTR,30)@[System::StartTime] +"', @ENDED_ON = NULL, @message = 'Package failed. ErrorCode: "+(DT_WSTR,10)@[System::ErrorCode]+" ErrorMsg: "+@[System::ErrorDescription]+"', @FILES_PROCESSED = '" + @[User::t_ProcessedFiles] + "', @PKG_EXECUTION_ID = '" + @[System::ExecutionInstanceGUID] + "'"" on property "SqlStatementSource" cannot be evaluated. Modify the expression to be valid.
Warning: The Execution method succeeded, but the number of errors raised (4) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
And how did I get 4 errors? - I only set my script task result to failure
I have a small database and a smalll table ( Table ID=565577053,with two indexes on this table). when more than one user connected, I got the deadlock on the index KEY and PAGE lock. I setup index with "DisallowRowLock" and "DisallowPageLock" , seems kill the index KEY and PAGE lock problem, but I got this TAB lock situation instead as following:
How can I get rid of this deadlock without changing the application code(without using set the isolation level or NOLOCK hint). When I load more data, will this problem goes away? Any kind of help will be appreciate.
I have scheduled a job using Job Agent in SQL2K (Management). Every once in a while i get an error when i view job history:
Executed as user: xxx. Transaction (Process ID 53) was deadlocked on lock | communication buffer resources with another process and has been chosen as the deadlock victim. Rerun the transaction. [SQLSTATE 40001] (Error 1205). The step failed.
The process ID changes for every error. Sometimes its 51, 56, or 54 as well.
I have checked several times, but there is no other process that runs at that time. I even rescheduled it for a different time, but even then it fails about once every week or two.
How can i check what is the other procedure it is deadlocking with, if it is? OR what exactly is the problem, if it is not with any other process?
Hi , I have some issues with deadlock.I am getting deadlock becuase of two select on same table. The sql server log is like this , Select statements should have always shared lock.I am not getting why its doing exclusive lock and creating deadlock.
5/6/2008 12:38 spid4s Unknown Deadlock encountered €¦. Printing deadlock information 5/6/2008 12:38 spid4s Unknown Wait-for graph 5/6/2008 12:38 spid4s Unknown Log Viewer could not read information for this log entry. Cause: Data is Null. This method or property cannot be called on Null values.. Content: 5/6/2008 12:38 spid4s Unknown Node:1 5/6/2008 12:38 spid4s Unknown KEY: 9:72057594050117632 (8d036f07c58f) CleanCnt:3 Mode Flags: 0×0 5/6/2008 12:38 spid4s Unknown Grant List 3: 5/6/2008 12:38 spid4s Unknown Owner:0×12E9F160 Mode: S Flg:0×0 Ref:1 Life:00000001 SPID:68 ECID:0 XactLockInfo: 0×353D1C54 5/6/2008 12:38 spid4s Unknown SPID: 68 ECID: 0 Statement Type: SELECT Line #: 4 5/6/2008 12:38 spid4s Unknown Input Buf: Language Event: (@actDefId nvarchar(36)@stateList varchar(1)@stateList1 varchar(1)@procRelObjType smallint@procRelObjIdList varchar(36)) 5/6/2008 12:38 spid4s Unknown Requested By: 5/6/2008 12:38 spid4s Unknown ResType:LockOwner Stype:€™OR€™Xdes: 0×2FBB67F0 Mode: X SPID:112 BatchID:0 ECID:0 TaskProxy0×0792E378) Value:0×38baa20 Cost0/11888) 5/6/2008 12:38 spid4s Unknown Log Viewer could not read information for this log entry. Cause: Data is Null. This method or property cannot be called on Null values.. Content: 5/6/2008 12:38 spid4s Unknown Node:2 5/6/2008 12:38 spid4s Unknown KEY: 9:72057594049986560 (6f02e1cd37c3) CleanCnt:3 Mode:X Flags: 0×0 5/6/2008 12:38 spid4s Unknown Wait List: 5/6/2008 12:38 spid4s Unknown Owner:0×12396EE0 Mode: S Flg:0×2 Ref:1 Life:00000000 SPID:90 ECID:0 XactLockInfo: 0×0AA8178C 5/6/2008 12:38 spid4s Unknown SPID: 90 ECID: 0 Statement Type: SELECT Line #: 4 5/6/2008 12:38 spid4s Unknown Input Buf: Language Event: (@actDefId nvarchar(36)@stateList varchar(1)@stateList1 varchar(1)@procRelObjType smallint@procRelObjIdList varchar(36)) 5/6/2008 12:38 spid4s Unknown Requested By: 5/6/2008 12:38 spid4s Unknown ResType:LockOwner Stype:€™OR€™Xdes: 0×353D1C30 Mode: S SPID:68 BatchID:0 ECID:0 TaskProxy0×13B3E378) Value:0×12e9e780 Cost0/6164) 5/6/2008 12:38 spid4s Unknown Log Viewer could not read information for this log entry. Cause: Data is Null. This method or property cannot be called on Null values.. Content:
If you have any idea regarding this please let me know ASAP.
I have a deadlock that I can't figure out. Both processes are doing a select from the same table. The owner mode on both is IX and the request mode is S. The lock is a Page Lock.
I have a problem to read varibale inside script. the error discription is following-
Error: A deadlock was detected while trying to lock variables "User::FilePath" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out.
this is my code. i my code i am using two variables, but i can access only one . i have to retrive file directory and file path is generated by other system.
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
Is there a way to send out an email woth deadlock information (victim query, winner query, process id's and resources on which the deadlock occurred) as soon as a deadlock occurs in a database or at instance level?I currently has trace flag 1222 turned on. And also created an alert that send me an email whenever a deadlock occurs. but it just says that a deadlock occurred and I log into sql server error log and review the information.
Hi We are facing an acute situation in our web-application. Technology is ASP.NEt/VB.NET, SQL Server 2000.
Consider a scenario in which User 1 is clicking on a button which calls a SQL stored procedure. This procedure selects Group A of records of Database Page1.
At the same time if User 2 also clicks the same button which calls same SQL stored procedure. This procedure selects Group B of records of Database Page1.
So, its the same Page1 but different sets of records. At this moment, both the calls have shared locked on the Page1 inside the procedure.
Now, in call 1, inside the procedure after selecting Group A of records, the next statement is and update to those records. As soon as update statement executes, SQL Server throws a deadlock exception as follows :
Transaction (Process ID 78) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction
We are able to understand why its happening. Its because, Group A and Group B of records are on the same Page1. But both the users have shared lock on the Page1. So, no one gets the exclusive lock in records for update, even though, the records are different.
How can I resolve this issue? How can I get lock on wanted rows instead of entire page?
Hi, I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.
From the parent package-> Execute Process Task-> dtsexec /F etc... /<pkg variable> = "servername"
Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)
I "sometimes" get the following error:
OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
Help would be appreciated!
I have seen other posts on this but, not able to relate the solution to my scenario.
Package works fine when run from BIDS, DTExec, dtexecui. When I schedule it, It get these random errors. (See below)
The main culprit is a variable called "RecordsetFileDIR" which is set using an expression. (@[User::_ROOT] + "RecordSets\")
A number of other variables use this as part of their expression and as they all fail, pretty much everything dies.
I have installed SP1 (Not Beta) on server. Package uses config files to set the value of _ROOT.
The error does not always seem to be with this particular variable though. Always a variable that uses an expression but errors are random. Also, It will run 3 out of 10 times without a problem. I am the only person on the server at the time.
Any ideas?
Cheers,
Crispin
Error log:
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073659822,0x,The variable "User::RecordsetFileDIR" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073639420,0x,The expression for variable "rsHeaderFile" failed evaluation. There was an error in the expression.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
I want to lock a table so others cannot lock it but able to read it inside transactions.
The coding I need is something like this: set implicit_transactions on begin transaction select * from table1 with (tablock, holdlock) update table2 set field1 = 'test' commit transaction commit transaction
I have tried the coding above, it won't prevent others from locking table1.
So, I changed the tablock to tablockx to prevent others from locking table1. But this will also prevent others from reading table1. So, how can I lock table1 so others cannot lock it but still able to read it?
I recently added a column to an existing table with a getdate default. When doing a query from that server everything works fine. When a query is ran from a remote server I get an SQLOLEDB error message saying 'inconsistant metadata'. I've tried dropping the remote server and reconnecting but that didn't seem to resolve the problem. Can anyone tell me how to resolve this error. I believe the error number is 7353.
Hi,Is it possible to get metadata (i.e. descriptions of tables etc.) insql-server? In Oracle you can retrieve this information with tables likeall_objects, user_tables, user_views etc. For example, this query selectsthe owner of the table 'ret_ods_test' (in Oracle!):select ownerfrom all_objectswhere object_name = 'ret_ods_test'What's the equivalent in sql server?Thanks a lot.
Is there a way to find out which user defined procs/child packages etc are been called in SSIS packages using some metadata. The idea is to have a document which lists the number of packages called, whats sprocs and child packages are executed by those pkgs..
I have checked the SSIS metadata whitepaper but that is too generic.
[OLE DB Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "objectName1" needs to be updated in the external metadata column collection.
A corollary question: what does right-clicking a package in Solution Explorer and clicking "Reload with Upgrade" do?
-We are using SSIS packages for various kind of data load from excel source. -If there are any change in the data type or format of excel, the package cries for the Metadata mismatch. -During design time if you accept the metadata changes, all things work fine.
But in our case we have deployed the packages on Production Server, now the excel file format/data has changed. The packages are expecting a different metadata so they are not working at all.
Do you have any suggestions for the above problem? Thanks, Vijay.
i am using icolumnsrowset interface to get some metadata about the columns in a rowset, but i never got unique and primary key columns in the columnsrowset, they always return null, when using sqlcedataadapter i simply add addwithkey option to the adapter to determine it, but i dont know how to do it by using ole db interfaces, i have tried to set DBCOLUMN_KEYCOLUMN flag to true on ccommand<cynamicaccessor, crowset> but it seems it rejects it, generating an unknown error, error object says almost nothing except that 'errors occured[,,,,,]' text
can someone tell me, how can i retrieve columnsrowset with that unique and primary key sections filled?
Hello, i would like to know if it's possible to generate automatically a word document or an excel document that will contain all the metadata definition, for example containing the source columns names, their datatype, and the destination with their datatypes, so that it would easy to create a data dictionnary .
It's now quite some time that one particular behaviour of SSIS is really frustrating me and I would like to know if I'm the only one experiencing this problem or if other people have the same problem. The issue I'm talking about is SSIS 'dependency on what is written in the XML files describing the flows. Particularly with the Data Types of columns. I'm explaining myself: Imagine your are developping a flow containing several numeric(18,0) columns... During the flow you have to perform a lookup on an Integer Field.... Of course this operation is not allowed as a numeric is not mappable with an Integer... (This is, in my opinion, a nonsense as an implicit conversion has to be possible). as a result of this behaviour, I decide to change the datatype (numeric) from my source query to an integer and use it in the Lookup which of course succeeds but now I have a second problem: each lookup in my flow has an error handling branch which I'm joining back using a Union transform. and there we have the second irritation: the Union transform doesn't replicate the Data Type changes that occured upwards in the flow... worse: it even has no interface to let you modify the data types like the advanced editor of some transforms or data sources. (I've just lost a complete dataflow while trying to modify it manually in the xml file directly :-( for those who are considering modifying directly the XML, don't!! You are asking for trouble and a lot of frustration when you'll switch back to the designer to see the effects ) My question is now: Am I misusing SSIS?? Is there somewhere an option to activate in order to get this behaviour fixed?? Has anyone else experienced this problem?? How are you solving this?? Are there any plans in the future to loose this dependency on the datatypes or at least add some implicit conversions??
Thanks in advance for your replies, suggestions,questions and other thaughts about this subject :-)
I have a question regarding my metadata information. I finally setup my fixed width file which took some time. Is there a way that I can backup my metadata so I wont have to recreate these setting again. I'm thinking the format of the file is stored in the metadata so if I have a user running the SSIS package from the Business Intell Studio they wont reset all of my columns. Is there a file I can restore or backup if this should happen
I'm running the following query in SQL Server 2005: select name from master..syslogins; It is being executed from within a stored procedure.
For user 'sa' - I get the complete list of users. For a user (say 'user1') with NO sysadmin privilege - I get only two names: 'sa' and 'user1'
Is there a way for me to retrieve the complete list of users even for 'user1' without making any changes to his profile (or making very MINIMAL changes to profile)?
I don't want to give sysadmin profile to this user. I know 'GRANT VIEW ANY DEFINITION TO public' works, but don't want to do that either.
I wanted to see if anyone has explored posting a Report KB based on metadata in the RS portal? If so, have you found a way to post the information on the RS portal?
I really am looking to add additional properties to a report. Other than author and description. I would like to add 2 to 3 more fields that would feed over to the catelog table on the report server. Then write a few reports that will allow for definitions, metadata, and links to the reports.
Does anyone have any ideas for something like this?
hi, I try to post a new question about metadata refresh...even if i see other thread that work on a similar problem.
I have a ssis package that import an xml huge file (500 mb); These are the main step:
1) generate a XSD file against xml using xsd.exe utility
2) using xml task, make a diff between the old xsd and the new
3) if there are no difference, I start the data flow task that import xml in sql server; otherwise I stop all the task, edit the data flow task, change the xsd reference in advanced editor and then make many "double clik / OK" on every single flow....
The underling idea is that xml file change because some columns are added but these columns are not interesting for my elaboration, so i can ignore this new column and work without mapping it.
What I'm looking for is a way for make, via SSIS, the "double clik / OK" steps....in other words, to update the metadata.
Could anybody suggest me a way? it's a sort of macro, or keyboard recorder...I'm trying to study xml package configuration; is this a good way ?
another way is to give to the end user the task to update metadata; for making this I need to open the package editor (visual studio..:!) in a more confortable environment....For example, is possible to edit the ssis package in ms access? probably i know the answer...
I'm trying to create a Data Dictionary view from system table info like tablename, fieldname, datatype etc. I can find all that I need except for the "description" field which is displayed in Enterprise Manager/ Repository metadata pane.
How can I locate this field so I can reference it in a view? Isn't it stored in a system table? Master, model? Where is it?
Hey there,Im wondering if there is a way to determine which views in my database use the "order by" statement. The reason I need this is because we need to migrate over to MS SQL 2005 where the order by statements are ignored within the views themselves. Now(in mssql 2005) you need to explicityly state the order by now when calling a view ie. select * from [viewname] order by column x, y desc, z instead of ie. select * from [viewname] where the view already had the applicable sorting done within the view.If those order by statements are ignored, some production software which rely on the ordered data will corrupt.Please let me know if there's a way to query the actual database and determine which views have 'order by' statements in them.thx
Did some searching and didn't seem to find what I'm looking for. I'm pretty new to SQL Server (most of my experience is on DB2 for z/OS).I'm building some new tables, and want to find a way to add comments to the metadata for the column. In DB2 the syntax is:COMMENT ON COLUMN TB_CREATOR.TB_NAME.COLUMN_NAME IS 'comments here';ORCOMMENT ON TB_CREATOR.TB_NAME (COLUMN1 IS ' comment here',COLUMN2 IS ' comment here', );Is there anything like this in SQL Server?Thanks!
I'm new to dba'ing so go easy on me. I'm looking after a brand new installation of sql server 2005. I've created a simple db with 1 table but when I go to MSAccess ( as a newly created user) and create a linked table to sql database all the metadata is showing and I can't stop it.
I've tried going through securables but its still visible no matter how much I try to deny. From what I've read this shouldn't be possible as making metadata invisible should be standard.Can anyone throw any light on this?
