Microsoft Access Doesn't Support Design Changes To The Version Of Microsoft SQL Server
Jul 23, 2005
Dear All,
Access adp on sql-server 2000
After upgrating to A2003 updating data with 1 perticular combobox causes the
program to hangs without any error-msg.
Traying to change te combobox recordsource i get this error:
This version of Microsoft Access doesn't support design changes to the
version of Microsoft SQL Server your project is connected to. See the
Microsoft Office Update Web site for the latest information and downloads
(on the Help menu, click Office on the Web). Your design changes will not be
saved.
The solution in :
http://support.microsoft.com/defaul...kb;en-us;313298
tolks about SP 'dt_verstamp007' but I have SP 'dt_verstamp006'
What should I do.
Is the failure of the combobox also caused by the absence of dt_verstamp007
???
odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect
we got the error with access 2000 database and PHP as prog. language .
we created dsn for the connection.
reboot solves the problem. but we need another solution better than this.
Hello, I would like to see if Microsoft has issued any announcement on SQL Server 2000 end of support. If anyone is aware of this or seen new posts/articles, please let me know. Thank you!
I was wondering if Microsoft SQL Server support any partitioning method (like range, list, hash or composite partitioning in Oracle) or you have to partition all tables manually?
I'm trying in vain to upgrade sql server 2000 to 2005 with great headache and pain.
I (finally) have removed all Beta, and other incompatible version of .NET, Visual Studio and any other offending components, and made it to the first page of the install shield.
The .NET 2.0 components installed fine - but I get a fatal error trying to install the SQL Server Set Support Files.
I do have a log file - and have tired searching on the various error codes in it, but am coming up blank. Please advise - this is taking forever!
sample of error msgs in log file:
MSI (s) (B0:E0) [12:33:06:613]: Note: 1: 1935 2: 3: 0x8002802F 4: 5: CreateAssemblyNameObject 6: Microsoft.NetEnterpriseServers.ExceptionMessageBox,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0" MSI (s) (B0:E0) [12:33:06:613]: Product: Microsoft SQL Server Setup Support Files (English) -- Error 2908. The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}.
MSI (s) (B0:E0) [12:33:06:613]: Executing op: ComponentRegister(ComponentId={52723CBD-3400-458C-988A-4D012E6CAEDB},KeyPath=<Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0",State=3,,Disk=1,SharedDllRefCount=0,BinaryType=0) Error 2908. The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}. MSI (s) (B0:E0) [12:33:06:629]: MSCOREE not loaded loading copy from system32 MSI (s) (B0:E0) [12:33:06:629]: Assembly Error:Function not defined in specified DLL.
MSI (s) (B0:E0) [12:33:06:629]: Note: 1: 1935 2: {52723CBD-3400-458C-988A-4D012E6CAEDB} 3: 0x8002802F 4: 5: CreateAssemblyNameObject 6: Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0" MSI (s) (B0:E0) [12:33:06:629]: Product: Microsoft SQL Server Setup Support Files (English) -- Error 1935. An error occurred during the installation of assembly 'Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {52723CBD-3400-458C-988A-4D012E6CAEDB}
Error 1935. An error occurred during the installation of assembly 'Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {52723CBD-3400-458C-988A-4D012E6CAEDB} MSI (s) (B0:E0) [12:33:06:629]: User policy value 'DisableRollback' is 0 MSI (s) (B0:E0) [12:33:06:629]: Machine policy value 'DisableRollback' is 0 Action ended 12:33:06: InstallFinalize. Return value 3.
I am trying to configure distributed transaction and XA support using Microsoft SQL Server 2005 JDBC Driver. I have coppied SQLJDBC_XA.dll from XA directory and placed in my sql server binn directory and trying to run the script xa_install.sql from binn directory with command as below :
But I am getting error saying : [DBNETLIB]SQL Server does not exist or access denied. [DBNETLIB]ConnectionOpen (Connect()).
when I replaced local host with the machine name it gives error : [Shared Memory]SQL Server does not exist or access denied. [Shared Memory]ConnectionOpen (Connect()).
where in I am able to test connection from Websphere using the same connection.
Please help some one ....... I am in URGENT need.... I need to enable XA suport for my application to run........
Recently I've installed Microsoft SQL Server Health and History Tool Version 2
and The SQLH2 Reports are a set of reports that provide different views on the data
that the tool collects. But unfortunately I can be able to see Data on Performone counters
Report. I can not find optional component SQLH2 Performance Collector is a stand-
alone service of Microsoft Windows that collects and stores performance counter data from
selected servers.
The Deployment guide tells :
Performance Collector is optional, and is available for download from the Microsoft Download Center (search for SQL Server with keyword SQLH2): http://www.microsoft.com/downloads/search.aspx
Microsoft.AnalysisServices.Viewers.DLL dll in VS 2005 but sometimes it gives an error.
"Code generatio for property 'ConnecitonManager'" failed. Error was:'Property accesor 'ConnectionManager' on object 'AssosiactionViewer1' threw the following exception:'Object referance not set to instance of an object"
Is there anyone here who use "Microsoft SQL Server 2005 Datamining Viewer Controls" in SQLServer2005 FeaturePack ? http://www.microsoft.com/downloads/details.aspx?FamilyID=50b97994-8453-4998-8226-fa42ec403d17&DisplayLang=en
i am using VS2005 Version 8.0.50727.762 (SP.050727-7600) and SQL Server 2005 SP2
i don't know if it was mentioned before, but i solved the issue that Microsoft SQL Server Management Studio Express won't show the option to create/modify a sql compact database by installing not this Version:
Microsoft SQL Server Management Studio Express Date: 19.04.2006 http://www.microsoft.com/downloads/details.aspx?FamilyID=c243a5ae-4bd1-4e3d-94b8-5a0f62bf7796&DisplayLang=en
but this one:
SQL Server Management Studio Express Service Pack 2 €“ CTP-Version Date: 19.12.2006 http://www.microsoft.com/downloads/details.aspx?FamilyID=ccbda432-8ecf-4c82-bdef-b575eaf07f55&DisplayLang=en
hope this helps.
Nihat
P.S. i'm curious if anybody else had the same issue, caused of using the wrong Version of SSMSe?
I have a query that executes just fine except that it won't recognize varchar(255) ( or any other value within the () ) and if I leave it off like this: varchar, then it executes but it leaves that value as 1 and that is just not very useful for my purposes. This also happens with anything else that requires () to add length such as char(), or nvarchar(), etc... Any ideas?
I am looking in to using Microsoft Clustering supported in NT Server Enterprise to provide failover support for 2 database servers running SQL Server 7. I was wondering if anyone had any experience with it--good or bad. I read the white paper and it sounds good, but I'd like to get some real world application experience.
Does Microsoft officially support installing SQL 2005 Express on a server where SQL 2000 Enterprise Edition is already running (a has to keep running).
In case they do, where do i find this official info / note.
Have they released white papers on this matter?
I know it is possible to install the two together and that they can coexist, but I am worried about how the two SQL installations wil behave when being updated with patches, security updates, service packs etc. do you run the possibility of them corrupting each other? Therefor it is vital to know if Microsoft supports the two running on the same system.
I'm switching over to SQL Server from Access I have an iif statement in access and i'm not to sure on how to do the same thing in SQL Server, any guidence is greatly appreciated. I was thinking about using a case statement but not sure on the syntax.
Access statment: Sum(IIf([Hit_Ratio]![STATUS_CD]='B',1,0))+Sum(IIf([Hit_Ratio]![STATUS_CD]='Q',1,0))+Sum(IIf([Hit_Ratio]![STATUS_CD]='L',1,0))+Sum(IIf([Hit_Ratio]![STATUS_CD]='K',1,0)) AS Quoted
"Failed to copy objects from Microsoft SQL Server to Microsoft SQL Server "
I keep getting this when trying to copy stored procs from one db to another on the same server. I am using the DTS wizard. I have been able to copy the tables but I need the sp's too, and there are too many to copy one at a time.
In VS 2005, when we choose database connection, we can choose one of the above. My question is in what situations should we choose MS SQL Server Database File (SqlClient), and when should we choose Microsoft SQL Server?
I want to deploy a standalone desktop application with a backend database. Which backend database should I should and which of the above connection should I choose?
I have a database in MSACCESS 2003 that is 680MB (after compacting) and contains 41 tables.
I tried to import these tables to SQL Server 2005 (express edition) using the :"upsizing wizard" provided in MSACCESS. The wizard works fine but all the tables are not being imported to SQL Server (only 19 tables are getting imported) and the size of the database in SQL Server (the ".mdf file") is 1.03 GB (I have tried using the "shrink" option also) . Further, when I try to open one of the tables (which has 625295 rows and 90 columns) , it takes lot of time to display all records.
So, my problem is do I need to set any options for any of these above issues, I tried to look for any information regarding this but was unsuccessful.
Any help on this will be very much helpful for me!
I'm not asking a lot. I just want to know if I can connect from anExchange server to a SQl server without having to use Access linkedtables. Surely MS must have had a look at this but I can't findanything out there.Help appreciated.Ginters
Hello I am developing a web application that will allow users to upload a .mdb file and from that file I need to populate an SQL database. I know the table name of the .mdb file, but I am unclear how to structure my data access layer correctly. How do I pull data from the .mdb file and once I have it how do i populate the SQL database?Any advice would be greatly appreciated.thanks!
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application. --------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
End Sub this code worked well. we know sql7 is not compatiable with vista. please tell us how to connect it wiith sql2005 . we downloaded orcas express edition beta. we created a database also. please let u know how to connect with Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider for Microsoft SQL Server Compact 3.5).
I am looking forward to a native 64-bit file-based database solution on Microsoft Windows platform. And I don't know why Microsoft didn't release the native 64-bit solution for JET engine (MDB file).
So, before I using this light-weight and file-based version of SQL Server, I will like to ask the question that the 64-bit version has been put into develop schedule?
I want to use SQL Server to query an Access Database with about 40,000 rows of data. If possible, I don't want to upsize the database because others need acess to it in the ACC97 format. Is there a way to use ODBC to connect to the ACC97 database so that I can use the SQL query capability of SQL server to query the database.
I know access allows you to write some SQL queries but I need the power of the SQL server and now it is a matter of curiosity because I've been searching for this answer for about 8 hours.
- Microsoft SQL Server 2005 Standard Edition running on Microsoft Windows Server 2003 Standard Edition - Client Service for Netware installed. - Access 2000 database in a Novell Directory Services (NDS) Environment - SQL Server service running under local Administrator account.
Linked server configured as follow:
Linked server: MyDB Provider: Microsoft Jet 4.0 OLE DB Provider Product name: Access 2000 Data Source: UNC path to my Access database
Security: Admin with no password (default Access behaviour)
I can connect to my access database by following the next steps:
- Open Management studio on the SQL Server itself (where I'm logged in as Administrator) - Connect using Windows Authentication (Administrator) - Create a new query, run EXEC sp_tables_ex 'MyDB'
This will return all the tables from the Access database.
I can also make a view pointing to MyDB...MyTable.
Enough prove to me It can work....
So far so good
But now the tricky part.
When I login as 'sa', I can't connect and will receive the following message:
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "MyDB" returned message "'Full UNC to my access database' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.".Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "MyDB".
(In real life I want to connect to my SQL 2005 Server from a ASP.NET (2.0) application using SQL authentication, but as long as I can't get the above working this is not important for now)
