Microsoft.Jet.OLEDB.4.0 Has Not Been Registered
Aug 9, 2006
I'm trying to import an access database into a sql express database (32 bit system) and get the following error
Msg 7403, Level 16, State 1, Line 1
The OLE DB provider "Microsoft.Jet.OLEDB.4.0" has not been registered.
my script is as follows
SELECT *
FROM OPENDATASOURCE(
'Microsoft.Jet.OLEDB.4.0',
'Data Source="k:armycwy.mdb";
User ID=Admin;Password='
)...CWAM_ROSTER
Anyone got an idea what is wrong?
TIA
Kevin
View 2 Replies
ADVERTISEMENT
Jun 21, 2006
Using OpenDataSource I run into this problem.
I have an SQL Server 2005 installed on Windows 2003 64 bit server (no itanium)
I have a 32 bit client where I run Management Studio.
This is the full detail of the error:
--------------------------------------------
Msg 7403, Level 16, State 1, Line 1
The OLE DB provider "Microsoft.Jet.OLEDB.4.0" has not been registered.
--------------------------------------------
I have tried installing a new 64bit Jet driver, but it only exists for Itanium.
How to force the system to use the 32 bit one?
I am stuck!
View 4 Replies
View Related
Feb 13, 2007
Hi All,
I am getting the below error while executing the opendatasource statement
SELECT ParamName, ParamDate,ParamNumber,ParamChar
FROM OpenDataSource( 'Microsoft.Jet.OLEDB.4.0',
'Data Source= c: estcmdmiscCSTARIntegrationParameters.xls;Extended properties=Excel 8.0')...[CSTARIntegrationParameters$]
Error :
The OLE DB provider "Microsoft.Jet.OLEDB.4.0" has not been registered
Enviromnet :
Windows 2003 64 bit with SP1 and sql 2005 installed.
Same code is executing fine in my local machine which is XP 32 bit.
Can some one help me in resolving this issue.
Also when I tried to check the providers by expanding the linked servers node in the SQL server management studio . i couldnt found the provider for jet.
Regards,
View 46 Replies
View Related
Oct 25, 2007
I am on an XP Pro 32-bit laptop, running SQL Server 2005 Developer Edition. I want to import an Excel spreadsheet into one of my databases using (formerly known as) DTS. The Excel spreadsheet was created in 2003 (I have Office 2007 installed on this laptop). Whenever I try and do any OleDb import, I get the error:
TITLE: SQL Server Import and Export Wizard
------------------------------
The operation could not be completed.
------------------------------
ADDITIONAL INFORMATION:
The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine. (System.Data)
------------------------------
BUTTONS:
OK
------------------------------
I cannot install/reinstall MDAC because I have the latest version. What else can I try?
As additional information, I also get the error when trying to import anything into or export anything out of Access 2007. I'm pretty sure MDAC is awful, but I still need OleDb providers for much of the work I am doing.
View 6 Replies
View Related
Jan 5, 2007
Hi,
I am trying to establish a connection to an Oracle database using the following code in a script task:
Dim oOleDbConnection As OleDbConnection
Dim sConnString As String = _
"Provider=OraOLEDB.Oracle;" & _
"Data Source=DBxxx;" & _
"User ID=Userxxx;" & _
"Password=Passxxx"
oOleDbConnection = New OleDb.OleDbConnection(sConnString)
oOleDbConnection.Open()
When I execute the script task, I receive the following error:
The 'OraOLEDB.Oracle' provider is not registered on the local machine.
Am using the correct provider?
I do not know how to resolve the said error.
Here are some facts:
Oracle 8i is installed.
Tnsnames.ora is updated.
I have successfully connected to Oracle SQL *Plus to test the above credentials.
Please help.
Thanks.
View 9 Replies
View Related
May 9, 2008
Hi all: I am getting the following error when I try to review the deployed reports on localhost.
"An error has occurred during report processing.
An attempt has been made to use a data extension 'OLEDB' that is not registered for this report server."
I checked the report manager, and for "connection type", there is a warning message as shown below:
"The data processing extension used for this report is not available. It has either been uninstalled, or it is not configured correctly."
I will appreciate any help in this regard.
Thanks
Reez
View 1 Replies
View Related
Jul 23, 2007
SP2 for SQL Server 2005 x64 has been less than happy for me.
The initial problem, mentioned in another thread, concerned SSIS client which stopped liking Data Flow components. It was solved by a removal and reinstallation of the client tools.
However, there now seems to be a problem with making use of the Teradata oledb provider within SSIS. Prior to the installation of SP2 there was no problem.
I create a new SSIS package
Add a Data Flow component
Within the data flow add an oledb source
Create a new connection - using the Teradata oledb provider
Test the connection (it works!)
Use SQL something like "select * from some_teradata_table_on_the_TD_server"
Click on columns, wait a second, a list of columns is returned
Add a SQL Server destination (with a new SQL Server connection)
Connect the two components
Save the package
Click go
The TD oledb source component turns bright red and the error is "class not registered"
I have uninstalled the TD oledb provider (and underlying TD components) and re-installed (32-bit and 64-bit) - no change
Any ideas?
- KjM
View 7 Replies
View Related
Oct 31, 2007
Hello,
I am running Windows Server 2003 R2 Enterprise Edition SP 2
I have created an integration package in VS 2005 which extracts data from Access 2000 and imports it into a table on SQL server 2005 running on this server.
The package runs ok in Visual Studio 2005, but when i schedule it as a step in 2005 SQL Agent to execute as a SQL Server Integration package using SQL Agent Service Account it comes with the following error -
I did a bit of research which suggests this is due to SQL 64 bit and Windows 64b bit, however I am running 32 bit !! also the sql server agent is a domain admin user...can you gurus please help ?
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 10:07:42 AM
Error: 2007-10-31 10:09:13.85
Code: 0xC0202009
Source: Copy all Data to Reporting Prod Connection manager "Access Allocations.mdb"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2007-10-31 10:09:13.85
Code: 0xC020801C
Source: 5_Copy vw_Allocations 5_Access Allocations [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Access Allocations.mdb" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2007-10-31 10:09:13.85
Code: 0xC0047017
Source: 5_Copy vw_Allocations DTS.Pipeline
Description: component "5_Access Allocations" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2007-10-31 10:09:13.85
Code: 0xC004700C
Source: 5_Copy vw_Allocations DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2007-10-31 10:09:13.85
Code: 0xC0024107
Source: 5_Copy vw_Allocations
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 10:07:42 AM
Finished: 10:09:13 AM
Elapsed: 91.422 second
View 29 Replies
View Related
May 8, 2006
hi i have another question.. is this connection provider supported on servers running under 64 bits???? if not? which provider should i use instead??? is there any service pack or upgrades for this ???
i think this is the problem running my job.. there's no other option left.. it is not permissions.. the path of the connection manager exists, the file destination does exist as well.. the curious thing is that my dts runs fine from SSIS but fails using the job..
do i need to have installed excel in my server to do this or any other component?????
View 6 Replies
View Related
Nov 23, 2006
Hi,
Previously i was using oracle8i with ssis.ssis was working fine.later i have upgraded 8i to oracle 9i.now when ever i try to establish a new connection using Microsoft OLEDB Provider for Oracle.i am getting the following error "Oracle error occurred, but error message could not be retrieved from Oracle" .but i am able to access the oracle 9i database thru pl/sql and toad. what could be the problem?
Thanks
Jegan.T
View 2 Replies
View Related
Mar 8, 2004
Dear all,
Still i am having problem with connecting sql server with ASP (Intranet).
Following is the code which i am using for the connection now,
Set conn=Server.CreateObject("ADODB.Connection")
conn.open "DSN=aspfirst;Uid=;PWD=;"
The error mesage , generated by this code is attached with this mail. Please check the attachment and hel me in the same
Graceson
View 2 Replies
View Related
Apr 17, 2007
Hi all,
I am currently working on a stored procedure in SQL 2000 where I use OPENROWSET function to read data from an Excel file into a temporary table.
It works fine when I logged in with username 'sa' and psswrd 'sa' but when I log in with another user name and password I get the following error:
"Ad hoc access to OLE DB provider 'Microsoft.Jet.OLEDB.40' has been denied.
You must access this provider through a linked server."
I am using VB 6.0 as front end. Is there anyway i can overcome this error?
Please help.
Dhiraj
View 7 Replies
View Related
Dec 21, 2006
Hi All,
I am writing an interface between SQL Server and Access. I have chosen to use a linked server using the Microsoft.Jet.OLEDB.4.0 provider. One of the requirements is to have multiple SQL statements in one transaction, which is where I am encountering the problem. (see below)
BEGIN TRAN
INSERT INTO ACCES...Table
Msg 7390, Level 16, State 2, Line 2
The requested operation could not be performed because OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "HES" does not support the required transaction interface.
I am having a really really hard time finding documentation on the Microsoft.Jet.OLEDB.4.0 provider, specifically I want to know for sure if it supports the ITransactionJoin interface.
The main question is - does MS Access linked servers support transactions?
Thank you for your help,
I have exausted all resources available to me in finding out the answer.
Thanks,
Eric
View 3 Replies
View Related
Feb 9, 2006
Hi all,
I'm using following code to create linked server and then access data
EXEC sp_addlinkedserver N'XLS',
'Jet 4.0',
'Microsoft.Jet.OLEDB.4.0',
'C:DataProdukthierachie.xls',
NULL,
'Excel 5.0;'
EXEC sp_addlinkedsrvlogin N'XLS', FALSE, NULL, Admin, NULL
SELECT * FROM XLS...SWProdukthierachie$
When executing the select statement I get following error message
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "XLS" returned message "Unspecified error".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "XLS".
Strange is that when I run this code on dev machine it works fine. But when I try to execute it on my second (pilot) machine it ends with the error message posted. I'm not a admin on the pilot machine so I don't know it's exact configuration but I'm beeing assured that the only difference is that on pilot machine there is no Visual Studio installed.
I'm running SQL Server 2005 9.0.1399.
Could anyone give me some hints?
Thx
fleshi
View 26 Replies
View Related
May 5, 2008
Hello all,
I want to create a table in MS-Access. So I have written the following query.
Code Snippet
select * from Openquery(KKACC, 'select * Into Temp from Table select 1 as col1')
But I am getting the following error.
Code Snippet
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "KKACC" returned message "Syntax error in FROM clause.".
Msg 7321, Level 16, State 2, Line 1
An error occurred while preparing the query "select * Into Temp from Table select 1 as col1" for execution against OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "KKACC".
How can I resolve this error. Does any one have any work arround for this..?
Thanks
-- Krishna
View 3 Replies
View Related
Feb 27, 2007
Hello
I got a problem with datatransfer via Microsoft.JET.OLEDB.4.0.
As long as I use the following statement it's working but only 255 Characters will be transferred to Excel.
INSERT INTO OPENROWSET('Microsoft.JET.OLEDB.4.0','Excel 8.0;HDR=YES;Database=C:xxxxxx.XLS','SELECT F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12 FROM [Tabelle1$]')SELECT TOP 65000 [Störungsnummer], CONVERT(varchar(50),[Annahmedatum],120) AS [Annahmedatum], CAST([Teilnehmernummer A] AS VARCHAR(255)) AS [Teilnehmernummer A], CAST([Annahmeperson] AS VARCHAR(255)) AS [Annahmeperson], [Annahmeplatz], CAST([Störungscode] AS VARCHAR(255)) AS [Störungscode], [Störungscode Nummer], CAST([Störungsmeldungstext] AS VARCHAR(255)) AS [Störungsmeldungstext], CAST([Wartungsvertrag] AS VARCHAR(255)) AS [Wartungsvertrag], CAST([SOSegment] AS VARCHAR(255)) AS [SOSegment], CAST([Kundensegment] AS VARCHAR(255)) AS [Kundensegment], CAST([TDV] AS VARCHAR(255)) AS [TDV] FROM [yyyyyyyyyyyy].
As soon as I try to extend the varchar over the limit of 255 the following error occurs:
String or binary data would be truncated. Export ERROR: XLS - Export in work.. (Microsoft.JET.OLEDB) The statement has been terminated.
Question: Is it possible to transfer more than 255 Characters into an Excel-Cell? If yes, whats wrong with the statement above?
Thank you very much for an early answer
regards
Chaepp
View 2 Replies
View Related
May 10, 2008
I have a stored proc that runs and produces an Excel 2007 file. I can run it fine within SQL Server Management Studio.
Basically, this is a partial code in the stored proc:
-- export sql server table data to excel 2007
insert into OPENROWSET('microsoft.ace.oledb.12.0',
'Excel 12.0;Database=D: emp est2007.xlsx;',
'SELECT * FROM LicensesrRegion') select * from Licenses
BUT when I have an execute SQL task to run that stored proc in an SSIS package, I received the following error:
Ad hoc access to OLE DB provider 'microsoft.ace.oledb.12.0' has been denied. You must access this provider through a linked server.
Please advise.
PS: I have to run that stored proc in an SSIS package because the SSIS package does some prereq stuff ( create folder, copy template to new Excel output file) then finally calls the aforementioned stored proc.
Thank you in advance.
Thanks!
View 6 Replies
View Related
Aug 17, 2007
Hi!
I have just installed Microsoft OLEDB provider for DB2 on a SQL server 2005. I created a Linked server against our DB2 V.8 Z/OS database. I tested the connection via execution of a simple select call, something like:
SELECT FIELD_A FROM DB2SRV.DB2DB.CREATOR_A.TABLE_A
WHERE FIELD_A='ABC'
I traced the call on the DB2 site. The SQL running on DB2 site was to my surprise without the €œwhere clause€?:
SELECT FIELD_A FROM DB2DB.CREATOR_A.TABLE_A
So, all rows are moved to SQL server before the where clause is executed, resulting in bad performance. The index on FIELD_A is not used and so on €¦ !
If anyone out there has an idea of what could be wrong, please let me know!
NB. I know that by using OPENQUERY pass-through query, all execution is done on the DB2 site.
View 5 Replies
View Related
Apr 26, 2007
Hi,
Urgent Help required..........
Can anyone explain me steps how to parameterized query to send oracle.
If you know any other control which help to do this rather than OLEDB source.
Please let me know.
THanks
View 18 Replies
View Related
Dec 25, 2007
Hi,
I have been trying to export data from a Microsoft Excel 2007, Tester.xlsx to a SQL Server 2005 table as :
SELECT * INTO CUSTMAS FROM OPENDATASOURCE('Microsoft.Jet.OLEDB.4.0',
'Data Source=C:Tester.xls;Extended Properties=Excel 8.0')...[Providers$]
I have an error:
Cannot get the column information from OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server"(null)"
View 9 Replies
View Related
Jul 22, 2007
This is a problem that never get solved, sometime I can use other way to avoid it, but havn't found a solution yet, i hope I can get some more idea here.
I am using SQL 2005, when I run
select * into #import1
from OpenRowSet('microsoft.jet.oledb.4.0','Excel 8.0;hdr=yes;database=\ws8webjeff2.xls',
'select * from [jeff2$]')
I get
Cannot initialize the data source object of OLE DB provider "microsoft.jet.oledb.4.0" for linked server "(null)".
when I try to compile a SP with that statement in it, I get the same error, like
create stored procedure test
as begin
select * into #import1
from OpenRowSet('microsoft.jet.oledb.4.0','Excel 8.0;hdr=yes;database=\ws8webjeff2.xls',
'select * from [jeff2$]')
end
so it seems the error may not relate to the real file, since at the compile stage, it should not check the real file?
On my live db, after I restart the SQL service, the statement will work, after a while, one or several days, I get the same error again. I can not restart my live db quite often for sure, so now I have another backup db server, I need run the statement on the backup server and then read the data from there.
I have the same problem at two places, both use SQL 2005.
So far there are three questions
1, why it works after restart, but only last for a while? something about memory? since the backup db seldom need restart and work fine after many days.
2, why it gives error in compile stage?
3, why two dbs in different Enviroment has the same problem
The most answer I have gathered so far is permission issue, true I got similar error if the import file is located in a place which SQL has no right to access. But in this case, it should not be.
Any other idea or suggestion?
thanks
View 2 Replies
View Related
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
View 17 Replies
View Related
Aug 23, 2007
Hi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L
View 3 Replies
View Related
Oct 10, 2006
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
View 5 Replies
View Related
Jun 21, 2007
Hi
I am trying to use Association Viewer Control in
Microsoft.AnalysisServices.Viewers.DLL dll in VS 2005 but sometimes it gives an error.
"Code generatio for property 'ConnecitonManager'" failed. Error was:'Property accesor 'ConnectionManager' on object 'AssosiactionViewer1' threw the following exception:'Object referance not set to instance of an object"
Is there anyone here who use
"Microsoft SQL Server 2005 Datamining Viewer Controls" in SQLServer2005 FeaturePack ?
http://www.microsoft.com/downloads/details.aspx?FamilyID=50b97994-8453-4998-8226-fa42ec403d17&DisplayLang=en
i am using VS2005 Version 8.0.50727.762 (SP.050727-7600)
and SQL Server 2005 SP2
thanks from now.
Cem Ãœney
View 9 Replies
View Related
Jul 23, 2005
Dear All,Access adp on sql-server 2000After upgrating to A2003 updating data with 1 perticular combobox causes theprogram to hangs without any error-msg.Traying to change te combobox recordsource i get this error:This version of Microsoft Access doesn't support design changes to theversion of Microsoft SQL Server your project is connected to. See theMicrosoft Office Update Web site for the latest information and downloads(on the Help menu, click Office on the Web). Your design changes will not besaved.The solution in :http://support.microsoft.com/defaul...kb;en-us;313298tolks about SP 'dt_verstamp007' but I have SP 'dt_verstamp006'What should I do.Is the failure of the combobox also caused by the absence of dt_verstamp007???Filip
View 2 Replies
View Related
May 22, 2007
odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect
we got the error with access 2000 database and PHP as prog. language .
we created dsn for the connection.
reboot solves the problem. but we need another solution better than this.
View 7 Replies
View Related
Sep 25, 2007
Hi,
I'm trying to install Microsoft Dynamics 10.0 with SQL 2008 Dev but when launching the utilities this returns the following error message:
******************************************************************
Your current SQL Server is not a supported version.
Req: Microsoft SQL Server 8.0
Act: Microsoft SQL Server code name "Katmai" (CTP) - 10
You need to upgrade to SQL Server 8.0 before continuing.
******************************************************************
Any ideas could help or has this if anyone knows been desinged not to work with GP10 currently?
Assad
View 7 Replies
View Related
Mar 17, 2008
I have a query that executes just fine except that it won't recognize varchar(255) ( or any other value within the () ) and if I leave it off like this: varchar, then it executes but it leaves that value as 1 and that is just not very useful for my purposes. This also happens with anything else that requires () to add length such as char(), or nvarchar(), etc... Any ideas?
View 1 Replies
View Related
Dec 28, 2001
Not able to use Enterprise Mgr after updgrade. Getting Class not registered? Any idea what to do to correct? Thanks, A
View 1 Replies
View Related
Apr 13, 2008
On the machine on which I want to put my database, there is already a Registered server called berlinsophos - berlin is the name of the machine and sophos relates to the anti-virus system that has been installed on this computer. I added my database to this server - but on reflection have thought that this might not be best practice since the Sophos so closely tied with computer security. Or perhaps, it was just a name that the person setting up the server gave the name to the first registered SQL Server on the machine.
Any suggestions would be greatly appreciated.
Roger
View 1 Replies
View Related
Jan 13, 2006
I was trying to burn cds when I got thisfda error message stating Interface not Registered what does this mean and can someone tell me how to fix it
-thanks Lequeta
View 3 Replies
View Related
