Microsoft OLE DB Provider For Oracle
Oct 26, 2000
Hi,
I issued the following set of statements against an Oracle 8.0.6 table linked to Microsoft SQL Server 7.0 (SP2):
BEGIN TRANSACTION
DELETE FROM ORACLE_DATABASE..SCHEMA1.TABLE1 WHERE COLUMN2=123.45
ROLLBACK TRANSACTION
and received the following message:
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'MSDAORA' does not support distributed transactions.
I searched BOL and found this sentence:
To perform distributed transactions between SQL Server and Oracle, you must use Oracle version 8.0.4.1 or later.
What am I missing? Is there a higher version of Microsoft OLE DB Provider for Oracle that supports distributed transactions (we are using the one that comes with Microsoft SQL Server 7.0 installation)?
Maja
View 2 Replies
ADVERTISEMENT
Sep 12, 2007
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
View 4 Replies
View Related
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
View 17 Replies
View Related
Aug 23, 2007
Hi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L
View 3 Replies
View Related
Nov 23, 2006
Hi,
Previously i was using oracle8i with ssis.ssis was working fine.later i have upgraded 8i to oracle 9i.now when ever i try to establish a new connection using Microsoft OLEDB Provider for Oracle.i am getting the following error "Oracle error occurred, but error message could not be retrieved from Oracle" .but i am able to access the oracle 9i database thru pl/sql and toad. what could be the problem?
Thanks
Jegan.T
View 2 Replies
View Related
Oct 9, 2007
Which one is better to use? Is there a significant difference between the two?
Does someone have the directions to add ODP.Net to my database connections list in SSRS?
Thanks
View 1 Replies
View Related
Apr 18, 2008
Does anyone know if the "Microsoft OLE DB Provider for Oracle" in 64-Bit Windows exists in SQL Server 2008 64-bit? It only existed in 32-bit SQL 2005, which was a big problem. Needed for Linked Server creation. We do not want to use OPENQUERY calls with the native Oracle 10G driver, too many coding changes.
Thank You
View 6 Replies
View Related
Apr 26, 2007
Hi,
Urgent Help required..........
Can anyone explain me steps how to parameterized query to send oracle.
If you know any other control which help to do this rather than OLEDB source.
Please let me know.
THanks
View 18 Replies
View Related
Oct 10, 2007
I have an ODBC connection setup for Oralce RDB. This works fine in say MSAccess. Now I would like to add a SQL Server Linked Server to this ODBC driver (it is for RDB not regular Oracle), but I am not able to get this to work. What is the Provider String and Location / Catalog for using this type of ODBC? I setup DSN as 'name', Provider String as 'UID=user;PWD=pass;' and it seems it tries to connect but gives an error. "%SQL-F-SCHNOTDEF, Schema USER is not defined"
Any help is greatly appreciated.
View 3 Replies
View Related
Jan 11, 2007
Hi--
I am running SQL Server 2005 on Win2k3:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.3790.1830
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
I have the OraOLEDB.Oracle provider installed to the (C:oraclexe) directory.
I am having problems querying from linked oracle server. When i setup oracle as a linked server and purposely enter an incorrect password the query i run tells me i have an incorrect password. So it at least knows that. when i set the correct password and run a query I get this error:
(i replaced the real server name with "someServer".)
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer".
This is how I set up my Linked server:
Provider: "Oracle Provider for OLE DB"
Product Name: SomeServer
Data Source: SomeServer
Provider String: "Provider=OraOLEDB.Oracle;Data Source=SomeServer;User Id=MyLogin;Password=MyPassword"
The query I run is:
Select * from [Someserver].[schema or database]..[tbl_name]
Any help??? What am i missing?
View 3 Replies
View Related
Feb 13, 2008
Is this included with SQL Server 2005? If so; how do I go about setting this up? Thanks in advance!!
View 1 Replies
View Related
Nov 7, 2005
The Microsoft OLE DB Provider for DB2 can be downloaded as a part of the SQL Server 2005 Feature Pack located at:
View 19 Replies
View Related
Jan 26, 2007
I follow the steps:
1.In configure OLE DB Connection Manager dialog, I click New.
2.In Connection Manager dialog ,I choose Native OLE DBMicrosoft OLE DB Provider for DB2.
3.In Connection Manager dialog I click the "Data Links" button. Now I am on "Data link property" dialog.
4.On connection tab, I enter fmdb for data source, which is my remote database name. On Network section I choose TCP/IP Connection and set the right IP/Port. Uncheck Single sign-on and enter the user and password. Then comes the Database section. Database name fmdb for Initial catalog,"fmdbrun" for Default Schema, then what is Package Collection?(My db2 database is in a AIX/RS 6000 box).
5.On advanced tab, I choose DB2/6000 for DBMS platform, ISO 8859-1 Latin-1(28591) for Host CCSID, and ANSI/OEM Simplified Chinese GBK(936) for PC Code page, then what's Default qualifer, I eft blank.
6. Then I switch back to "connection" tab, if I left "Package collection" blank and click "Test Connection" button,I got "Test connection failed because of an error in initializing the provider.- invalid parameter". If I use FMDBRUN(the default schema) for "Package collection" and click "Test Connection", I got "Test connection failed because of an error in initializing the provider. - The network connection was terminated because the host failed to send any data. SQLSTATE:08S01,SQLCODE:-605".
Anybody knows what's wrong.
View 24 Replies
View Related
Sep 12, 2007
Hi
We are checking VB 9 (Orcas).
we connected to database created under with sql server 7. with this code
Public cn As New ADODB.Connection
Public Sub OpenDB()
cn.Open("Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial catalog=Reservation;Data Source=.")
End Sub
this code worked well.
we know sql7 is not compatiable with vista. please tell us how to connect it wiith sql2005 . we downloaded orcas express edition beta. we created a database also. please let u know how to connect with Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider for Microsoft SQL Server Compact 3.5).
Rgds
Pramod
View 7 Replies
View Related
Mar 10, 2000
Anyone knows where I can find and install the above driver.
Trying to use Link Server from SQL 7.0 to access AS400 database using OLE DB option.
Urgent matter... Help!!!!
Have already tried to find and install this driver using SNA Client Software with out any success. SQL 7 does not come with this OLE DB drivers. Any idea where I can get it.
Thank you in advance....
View 1 Replies
View Related
Oct 18, 2007
I'm not able to see microsoft ole db provider for odbc drivers on sql server 2005. Anyone know which driver I should install to see it?
I'm trying to create a linked server from as400 to SS2K5.
http://www.sqlserverstudy.com
View 2 Replies
View Related
Feb 15, 2007
Hi:
I have a vb 6 app that exports data from sql to excel. The user has the ability to select either local or server. When they select server, the connection string is modified to include the server name instead of the local msde instance to look like this:
"provider=sqloledb;data source=MyServer;initial catalog=MyDatabase;user id=UserX;password=PasswordX;database=MyDatabase"
I'm using Microsoft Jet Provider 4.0 and OpenDataSource.
SELECT * INTO TempXL FROM OPENDATASOURCE('Microsoft.Jet.OLEDB.4.0',
'Data Source=C: estxltest.xls;Extended Properties=Excel 8.0')...[Sheet1$]
This code works fine when user is accessing msde on local, but when using above DSN, I receive the following message:
"2147217900 - OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEdB.4.0' IDBInitialize:: Initialize returned 0x800040005: The provider did not give any information about the error.]
When I trace the connection, these error messages occur:
Failed to set proper user name ('NT AUTHORITYSYSTEM') for the connection
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot alter table 'TblXMyTable' because this table does not exist in database 'master'. (State 42S02) (Code 4902)
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'TblxMytable'. (State 42S02) (Code 208)
[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The provider did not give any information about the error. (State 42000) (Code 7399)
[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.]. (State 01000) (Code 7300)
I am especially puzzled by the second message because I am specifying the database name in my connection string as:
"provider=sqloledb;data source=MyServer;initial catalog=MyDatabase;user id=UserX;password=PasswordX;database=MyDatabase"
I can read from the server copy and copy to Excel, but I cannot write back to SQL. Can someone please tell me what I'm doing wrong?
Thanks in advance for any help.,
View 1 Replies
View Related
Dec 5, 2007
Hello,
I have a web service contained in a apache tomcat server and I try to execute a webservice and store the result into a flat file.But I have a message saying me that there is an error in the xml document.
I suppose that it's my wsdl file.
But my wsdl file is fine!!!
Can the error come from the provider of the web service (Apache Tomcat).
I suppose that because in every example on the internet I didn't see an example an tomcat or other web server use.
View 1 Replies
View Related
Jun 12, 2007
I finally made data transfer between AS400 and SQL2005 work by using Microsoft OLE DB provider for DB2. I have tried other methods, some do not have build-in destination, some have unicode conversion problem. The only issue I have with this method is the peformance. For example, 300,000 rows load from AS400 take only 3 minutes with the ODBC connection in DTS, but more than 5 minutes with the microsoft OLD DB provider for DB2 in SSIS.
Does anyone have the same issue or figured out any tweaking that may speed up the transfer?
Thanks.
View 20 Replies
View Related
Feb 13, 2007
Hi All,
I am getting the below error while executing the opendatasource statement
SELECT ParamName, ParamDate,ParamNumber,ParamChar
FROM OpenDataSource( 'Microsoft.Jet.OLEDB.4.0',
'Data Source= c: estcmdmiscCSTARIntegrationParameters.xls;Extended properties=Excel 8.0')...[CSTARIntegrationParameters$]
Error :
The OLE DB provider "Microsoft.Jet.OLEDB.4.0" has not been registered
Enviromnet :
Windows 2003 64 bit with SP1 and sql 2005 installed.
Same code is executing fine in my local machine which is XP 32 bit.
Can some one help me in resolving this issue.
Also when I tried to check the providers by expanding the linked servers node in the SQL server management studio . i couldnt found the provider for jet.
Regards,
View 46 Replies
View Related
Feb 27, 2007
Im quite interested to see if any one is using Microsoft OLE DB Provider for Visual FoxPro 9.0 in an SSIS package. Is it possible to use this for free table directory like you can with the ODBC driver. ????
thanks kindly
My basic proccess is as follows: The source foxpro database has hundreds of dbf files ---the SSIS procress is as follows
1: Copy only required dbf files and/or matching .fpt files over to local drive on SSIS box(we only need 10 files)
use MS Visual Foxpro ODBC driver (free table option) and set up a system DSN--dataflow tab---datareader source--and away you go
View 1 Replies
View Related
Mar 1, 2007
Hi,
I am trying to connect to my SQL Server 2005 but it gave me following error message.
TITLE: Connect to Server
------------------------------
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
So, Please help me to solve this problem.
tnks.
View 20 Replies
View Related
Jul 15, 2001
Hi all,
If have faced the following problem when connecting to Oracle server from MS SQL Server 7.0 using OLE DB Provider for Oracle.
The problem is that I am trying to insert a record in a table in Oralce database, when I connect using OLE DB, and execute the INSERT, I have found that before the INSERT takes place, a TABLE SCAN is performed on the target table for the insert statement.
This realy affects the performance I am looking for.
I guiss there is a way to provide the connection with some parameters to overcome this problem of TABLE SCAN.
Thanks for your help in advance.
Regards.
Tareq Lootah
View 2 Replies
View Related
Feb 2, 2007
english:
Hello,
I have got a problem with the a linked server in SQL server 2005 (64 bit) to Oracle 8.0.5. (32 bit).
Further details:
The old existing SQL server 2000 (32 bit) has a linked server to Oracle 8.0.5. The works with the OLE DB provider from Microsoft. The new SQL server 2005 (64 bit) should also have a linked server to this Oralce database. I have installed the Oracle 8.0 clients on the new server. The connection to oracle works with the client tools from Oracle.
But the SQL server 2005 couldn't connect to the oracle database.
The error message from the SQL server sounds (translated form a german error message):
A instance of the OLE DB provider "OraOLEDB.Oracle" for the linked server "xxxxxx" can't create.
Is the Oracle client software / OLE DB provider the problem?
Exist an other OLE DB provider for Oracle, may be from Microsoft, which works?
Thanks for your help
german:
Hallo Zusammen,
ích habe ein Problem bei der Migration von SQL Server 2005 auf ein x64 Windows System.
Problem ist folgendes:
Auf dem alten Server Windows x32 lief SQL Server 2000 mit einem Verbindungsserver zum Oracle Server 8.05. Das funktionierte mit dem OLE DB treiber von Microsoft hervoragend. Nun haben wir aber eine neue Windows x64 Maschine und ich möchte die Verbindung zum Oracle Server wieder nutzen. Hatte die Oracle Client Software installiert und bekomme eine Fehlermeldung:
Eine Instanz des OLE DB Anbieters "ORAOLEDB.ORACLE" für den Verbindungsserver "xxxxx" kann nicht erstellt werden.
Ist das ein Problem mit der Oracle Client Software bzw. dem zugrunde liegenden OLE DB Treiber?
Gibt es einen anderen OLE DB Treiber für Oracle, z.B. von Microsoft, der funktionieren könnte?
Bin schon länger damit beschäftigt, das zum Laufen zu bekommen. Die Oracle Version ist nicht die neueste, ich weiß.
Was kann ich tun, damit das endlich läuft.
Für Hilfen wäre ich sehr dankbar.
View 9 Replies
View Related
Mar 2, 2008
connection manager
provider:
missing provider
oracle provider for ole db
i'm not able to see this provider in my ssis connection manager properties.
please help me out in getting the provider restored back in native providers options
View 4 Replies
View Related
Mar 2, 2004
Hi friends,
Can anyone help me in connecting sql server and asp.
Wheneever try to do the connection, I am getting following error. All the connection string which i am using are correct.
can you help me.
Following are the error line
----------------------------------------------------------------
Microsoft OLE DB Provider for SQL Server error '80004005'
Invalid connection string attribute
/MAsteringASP/global.asa, line 17
Microsoft OLE DB Provider for SQL Server error '80004005'
Invalid connection string attribute
/MAsteringASP/test2.asp, line 21
------------------------------------------------------
Please ckeck my code which I am using for connection
Thank you
Graceson MAthew
----------------------------------------------------------------
<%@ Language =VBScript %>
<% option explicit %>
<Html>
<head>
<title> Database Connection </title>
</head>
<body>
<%
<!-- #INCLUDE FILE="adovbs.inc" -->
dim conn
dim sql
dim r
dim aConnectionString
Set conn=Server.CreateObject("ADODB.Connection")
conn.Mode=adModeReadWrite
conn.Open="Provider=SQLOLEDB;UID=Administrator;Password=passw d;Initial Catalog=nrth;Datasource=server ip;Port Number= 80"
Response.Write (" Database Connectivity")
%>
</body>
</html>
View 10 Replies
View Related
Mar 8, 2004
Dear all,
Still i am having problem with connecting sql server with ASP (Intranet).
Following is the code which i am using for the connection now,
Set conn=Server.CreateObject("ADODB.Connection")
conn.open "DSN=aspfirst;Uid=;PWD=;"
The error mesage , generated by this code is attached with this mail. Please check the attachment and hel me in the same
Graceson
View 2 Replies
View Related
May 21, 2007
Hi guys
I wanna display the compname [in competencies tbl], firstname & surname [in users tbl], position level [in positions tbl] and userlevel [in compuser tbl] but i get the ff error msg
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]The column prefix 'CompUser' does not match with a table name or alias name used in the query.
My code:
SELECT compname, firstname,surname ,level AS positionlevel
FROM positions, compuser, users A, comppos
INNER JOIN Competencies
ON comppos.Compid = competencies.Compid
RIGHT JOIN Users
ON CompUser.UserID = Users.UserID
WHERE Users.UserID = '999209'
OR Users.UserID = 'helpdesk1'
OR Users.UserID = '999339'
OR Users.UserID = 'helpdesk5'
ORDER BY CompName
Pls kindly help
Noks
View 1 Replies
View Related
Apr 17, 2007
Hi all,
I am currently working on a stored procedure in SQL 2000 where I use OPENROWSET function to read data from an Excel file into a temporary table.
It works fine when I logged in with username 'sa' and psswrd 'sa' but when I log in with another user name and password I get the following error:
"Ad hoc access to OLE DB provider 'Microsoft.Jet.OLEDB.40' has been denied.
You must access this provider through a linked server."
I am using VB 6.0 as front end. Is there anyway i can overcome this error?
Please help.
Dhiraj
View 7 Replies
View Related
Oct 16, 2006
I get Microsoft OLE DB Provider for SQL Server error '80040e37'
Invalid object name '#t_testTemp484883646'.
when I run the following ASP code:
------------------------------------------------------------Code is below---------------------------------------------------------
<!---#Include File="../includes/adovbs.inc" -->
<HTML>
<HEAD>
<META NAME="GENERATOR" Content="Microsoft Visual Studio 6.0">
<TITLE></TITLE>
</HEAD>
<BODY>
<%
'----- Setup database connection
Set DataCmd = Server.CreateObject("ADODB.Connection")
Set rsData = Server.CreateObject("ADODB.RecordSet")
Dim varTempTableName
DataCmd.Open Application("DB")
'----- Use a Temp Table so that it gets destroyed automatically in case the page times out
'----- Use a Global Temp Table so that it is available across scopes when I open the record set below
'----- Append a semi unique number to the end because its global it could conflict with another browser running the same report
'varTempTableName = "##t_TestTemp" & Minute(Now()) & Second(Now())
varTempTableName = "#t_TestTemp" & Session.SessionID
strSQL = "Create Table " & varTempTableName & "(TestColumn2 int)"
DataCmd.Execute strSQL
strSQL = "select * from t_Test"
rsData.Open strSQL, DataCmd, adOpenForwardOnly,adLockReadOnly
Do While Not rsData.EOF
varTestColumn2 = rsData("TestColumn2")
'Error occurs when I place the following insert statement. Code works with the global variable
strSQL = "Insert into " & varTempTableName & " (TestColumn2) values (" & varTestColumn2 & ")"
DataCmd.Execute strSQL
rsData.MoveNext
Loop
rsData.Close
strSQL = "Drop Table " & varTempTableName
DataCmd.Execute strSQL
Set rsData = Nothing
Set DataCmd = Nothing
%>
</BODY>
</HTML>
View 1 Replies
View Related
Dec 25, 2005
Hi,I created a linked server for MS SQL Server 2005 Express to an Oracledatabase using the OLE DB Provider for ODBC. My ODBC Source uses theMicrosoft ODBC for Oracle driver.I'm using the OLE DB Provider for ODBC instead of the Oracle OLE DBproviders because those don't handle Oracle's Numeric Data Type well.When I set this up yesterday it worked fine. However I log in today andattempt to run sp_tables_exec against my linked server and get thefollowingOLE DB provider "MSDASQL" for linked server "WHATEVER" returned message"[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".OLE DB provider "MSDASQL" for linked server "WHATEVER" returned message"[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".OLE DB provider "MSDASQL" for linked server "WHATEVER" returned message"[Microsoft][ODBC driver for Oracle][Oracle]".Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41Cannot initialize the data source object of OLE DB provider "MSDASQL"for linked server "WHATEVER".I can tnsping the server, and I have no trouble connecting with theOracle OLE DB providerI try to set up ODBC logging but the log file is blank -- same withattempting to set up logging for Oracle's network client. I've beendealing with crap like this the last 4 days, something works one day,then the next nothing (I've done nothing to change the configurationbetween these outages).Can anyone help me?ThanksFrustrated
View 1 Replies
View Related
May 31, 2007
I have been using the Microsoft Oracle Provider (MSDAORA) up until I needed to work with CLOB data types in Oracle. As much as I hate to switch providers at this phase in the project, I can't use MSDAORA due to the CLOB limitation.
So, what other providers are available?
I know that there is a native Oracle provider (OraOLEDB.Oracle.1) that is supported in SSIS. Does anyone have any comments on this?
Are there other options for Oracle?
Any comments, feedback, etc appreciated.
Thanks,
Rick
View 3 Replies
View Related
Jan 9, 2008
Hi,
how do you pass parameters into a SQL statement to run in an Oracle database when you use the OracleClient Data Provider?
thanks in advance
Peter
View 3 Replies
View Related
