Microsoft SQL Server Sq

Oct 5, 2006

I took over a website for another consultant. This web site has a sql server database. I can ftp my programs to the site and run them, but I am not sure how I look at the data on the server database with Microsoft SQL Server Management Studio Express. How do I tell smse where the database is located?

Thanks

View 2 Replies


ADVERTISEMENT

Microsoft.AnalysisServices.Viewers.DLL Microsoft SQL Server 2005 Datamining Viewer Controls

Jun 21, 2007





Hi

I am trying to use Association Viewer Control in

Microsoft.AnalysisServices.Viewers.DLL dll in VS 2005 but sometimes it gives an error.

"Code generatio for property 'ConnecitonManager'" failed. Error was:'Property accesor 'ConnectionManager' on object 'AssosiactionViewer1' threw the following exception:'Object referance not set to instance of an object"


Is there anyone here who use
"Microsoft SQL Server 2005 Datamining Viewer Controls" in SQLServer2005 FeaturePack ?
http://www.microsoft.com/downloads/details.aspx?FamilyID=50b97994-8453-4998-8226-fa42ec403d17&DisplayLang=en

i am using VS2005 Version 8.0.50727.762 (SP.050727-7600)
and SQL Server 2005 SP2

thanks from now.

Cem Üney







View 9 Replies View Related

Microsoft Access Doesn't Support Design Changes To The Version Of Microsoft SQL Server

Jul 23, 2005

Dear All,Access adp on sql-server 2000After upgrating to A2003 updating data with 1 perticular combobox causes theprogram to hangs without any error-msg.Traying to change te combobox recordsource i get this error:This version of Microsoft Access doesn't support design changes to theversion of Microsoft SQL Server your project is connected to. See theMicrosoft Office Update Web site for the latest information and downloads(on the Help menu, click Office on the Web). Your design changes will not besaved.The solution in :http://support.microsoft.com/defaul...kb;en-us;313298tolks about SP 'dt_verstamp007' but I have SP 'dt_verstamp006'What should I do.Is the failure of the combobox also caused by the absence of dt_verstamp007???Filip

View 2 Replies View Related

Installing Microsoft Dynamics 10.0 With Microsoft SQL Server 2008 Katmai

Sep 25, 2007



Hi,

I'm trying to install Microsoft Dynamics 10.0 with SQL 2008 Dev but when launching the utilities this returns the following error message:

******************************************************************
Your current SQL Server is not a supported version.

Req: Microsoft SQL Server 8.0
Act: Microsoft SQL Server code name "Katmai" (CTP) - 10

You need to upgrade to SQL Server 8.0 before continuing.

******************************************************************

Any ideas could help or has this if anyone knows been desinged not to work with GP10 currently?

Assad

View 7 Replies View Related

Microsoft SQL Server Express And Microsoft Visual Studio...

Mar 17, 2008

I have a query that executes just fine except that it won't recognize varchar(255) ( or any other value within the () ) and if I leave it off like this: varchar, then it executes but it leaves that value as 1 and that is just not very useful for my purposes. This also happens with anything else that requires () to add length such as char(), or nvarchar(), etc... Any ideas?

View 1 Replies View Related

"Failed To Copy Objects From Microsoft SQL Server To Microsoft SQL Server "

Oct 3, 2001

Hello,

"Failed to copy objects from Microsoft SQL Server to Microsoft SQL Server "

I keep getting this when trying to copy stored procs from one db to another on the same server. I am using the DTS wizard. I have been able to copy the tables but I need the sp's too, and there are too many to copy one at a time.

Help!

TIA,
Bruce

View 1 Replies View Related

Difference Between Microsoft Sql Server 2008 And Microsoft Sql Server 2005

Mar 27, 2008



Pls tell me about the adjact difference between sql server 2005 and sql server 2008.
Why to upgrade for Sql Server 2008

View 1 Replies View Related

Microsoft SQL Server Database File (SqlClient) Vs Microsoft SQL Server

Aug 30, 2006

In VS 2005, when we choose database connection, we can choose one of the above. My question is in what situations should we choose MS SQL Server Database File (SqlClient), and when should we choose Microsoft SQL Server?

I want to deploy a standalone desktop application with a backend database. Which backend database should I should and which of the above connection should I choose?

Thanks very much for your information.

View 1 Replies View Related

Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]

Dec 10, 2003

Hi Everybody,


On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.

Thanks,

Arif



Server Error in '/' Application.
--------------------------------------------------------------------------------

ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:


[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731

View 5 Replies View Related

How To Connect ADODB With Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider For Microsoft SQL Server Compact 3.5)

Sep 12, 2007

Hi
We are checking VB 9 (Orcas).

we connected to database created under with sql server 7. with this code

Public cn As New ADODB.Connection

Public Sub OpenDB()


cn.Open("Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial catalog=Reservation;Data Source=.")

End Sub
this code worked well.
we know sql7 is not compatiable with vista. please tell us how to connect it wiith sql2005 . we downloaded orcas express edition beta. we created a database also. please let u know how to connect with Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider for Microsoft SQL Server Compact 3.5).

Rgds
Pramod

View 7 Replies View Related

Microsoft Access VS Microsoft SQL Server

Aug 26, 2006

hello all member

View 14 Replies View Related

Microsoft Exchange To Microsoft SQL Server

Jul 23, 2005

I'm not asking a lot. I just want to know if I can connect from anExchange server to a SQl server without having to use Access linkedtables. Surely MS must have had a look at this but I can't findanything out there.Help appreciated.Ginters

View 1 Replies View Related

How Can I Connect To Microsoft SQL Server 2005 CTP With Microsoft SQL Server 2005 Express Manager?

Aug 9, 2005

I installed Microsoft SQL Server 2005 Express Manager and connect to SQL 2000 normally

View 10 Replies View Related

Microsoft SQL Server Developer Edition Vs Microsoft SQL Server Express Edition

Mar 23, 2008

I have just installed sql server 2005 but, now I have two types of server name: Microsoft SQL Server Developer EditionMicrosoft SQL Server Express Edition Which one should I use? Does it matter??thanks.. 

View 1 Replies View Related

[Microsoft][ODBC Microsoft Access Driver] System Resource Exceeded

May 22, 2007

odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect





we got the error with access 2000 database and PHP as prog. language .



we created dsn for the connection.



reboot solves the problem. but we need another solution better than this.

View 7 Replies View Related

Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server Does Not Exist Or Access Denied

Jun 6, 2007

Hi,

When I am trying to access SQL Server 2000 database from another machine i got this error

Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied

but I could access the database on same server and in that server i could access other databases in different server.



View 6 Replies View Related

Help! SQL Server Error - [Microsoft][ODBC SQL Server Driver][SQL Server] Invalid Object Name ...

Jul 23, 2005

Dear all,On Win2000 server with SP3, I am trying to access a SQL Server 7.0database, "TestDB", from VB6 via a SQL Server ODBC system DSN using ADO2.7. In SQL Server Enterprise Manager, there is a login named "Tester".In its property window, NO "Server Roles" was assigned but its"Database Access" was set to "TestDB". This login was also made as theuser of "TestDB" with "public", "db_datareader" and "db_datawriter"selected as its "Database role membership". All the tables I am tryingto access in "TestDB" were created under "Tester".My code is like:Set conn = New ADODB.Connectionconn.Open "DSN=TestDSN;UID=Tester;PWD=test"Set cmd = New ADODB.Commandcmd.ActiveConnection = conncmd.CommandText = SQLset rs = cmd.Execute()If I set the SQL to something like "SELECT * FROM tbl_test", I alwaysget an error of "-2147217865" saying "[Microsoft][ODBC SQL ServerDriver][SQL Server] Invalid object name tbl_test". If I set the SQL to"SELECT * FROM Tester.tbl_test", everything runs properly. Could anyoneplease kindly advise why the first SQL is not working? Or in otherwords, why must I prefix the table name with its owner while the DBconnection is already made under that owner name? Thanks in advance.Tracy

View 10 Replies View Related

[Microsoft][ODBC SQL Server Driver][SQL Server]Login Failed For User 'ErrorLog'.

Feb 22, 2005

Hi, all

recently, I use the following script(somebody else) to create a database on a remote server: the script is as follow:
/*************************/
CREATE DATABASE [ErrorLog]
GO

Use ErrorLog

CREATE TABLE [dbo].[Errors] (
[ID] [int] IDENTITY (1, 1) NOT NULL ,
[SessionID] [char] (12) NULL ,
[RequestMethod] [char] (5) NULL ,
[ServerPort] [char] (5) NULL ,
[HTTPS] [char] (3) NULL ,
[LocalAddr] [char] (15) NULL ,
[HostAddress] [char] (15) NULL ,
[UserAgent] [varchar] (255) NULL ,
[URL] [varchar] (400) NULL ,
[CustomerRefID] [varchar] (20) NULL ,
[FormData] [varchar] (2000),
[AllHTTP] [varchar] (2000),
[ErrASPCode] [char] (10) NULL ,
[ErrNumber] [char] (11) NULL ,
[ErrSource] [varchar] (255) NULL ,
[ErrCategory] [varchar] (50) NULL ,
[ErrFile] [varchar] (255) NULL ,
[ErrLine] [int] NULL ,
[ErrColumn] [int] NULL,
[ErrDescription] [varchar] (1000) NULL ,
[ErrAspDescription] [varchar] (1000) NULL ,
[InsertDate] [datetime] NOT NULL
) ON [PRIMARY]



--Create the user "ErrorLog"

if not exists (select * from master.dbo.syslogins where loginname = N'ErrorLog')
BEGIN
declare @logindb nvarchar(132), @loginlang nvarchar(132) select @logindb = N'Navigator', @loginlang = N'us_english'
if @logindb is null or not exists (select * from master.dbo.sysdatabases where name = @logindb)
select @logindb = N'master'
if @loginlang is null or (not exists (select * from master.dbo.syslanguages where name = @loginlang) and @loginlang <> N'us_english')
select @loginlang = @@language
exec sp_addlogin N'ErrorLog', 'secret', @logindb, @loginlang
END
GO

if not exists (select * from dbo.sysusers where name = N'ErrorLog' and uid < 16382)
EXEC sp_grantdbaccess N'ErrorLog', N'ErrorLog'
GO

Grant select, insert On Errors to ErrorLog
/***************************/
in my *.asp program, I used the following string to connect to the database on the remote server.
/********
con.open "dsn=ErrorLog;uid=ErrorLog;pwd=secret;"
********/
the following message comes up:
/********/
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E4D)
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'ErrorLog'.
/*********/
what is the problem here?
when I set up dsn ErrorLOG, I used "abc" userID and password "XXX" which is our server database administrator assigned to me. I tested connection in odbc, it is OK
I just don't get, ther user ErrorLog already had login id and granted access to database errorlog. any clue, please help!
Betty

View 6 Replies View Related

[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server Does Not Exist Or Access Deni

Sep 29, 2005

Hi..

when I use MSSQL in local ASP files , it is fine.

But If I try to connect another ASP file that is hosted by another machine, I get the following error!

[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.

in local I connect to my sql like below

Server=AAA*DDDDDDD

when I connect to mssql from another machine I try that

Server=IP/AAA*DDDDDDD
Server=IP

View 4 Replies View Related

1[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server Does Not Exist Or Access Denied.

Jul 26, 2007

Hi,

when I was sending 50 simultaneous connections to the web services, I got these 2 errors:
- "1[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. "

- "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)"


Everything worked fine if I ran 10 simultaneous connections. I am using Microsoft ACT to load test the web service. The database is SQL Server 2000. Any idea about why this is happening?

Appreciate your help! Thanks!

Jason Zhu

View 3 Replies View Related

Error Connecting To Remote Server Using Microsoft SQL Server Management Studio Express

Jun 20, 2007

Dear All,

I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.

View 5 Replies View Related

Required Microsoft Sql Server 2005 Express Server Roles For JDBC Connection

Mar 28, 2007

Hi!

I have developed a database in MS SQL Server 2005 Express, to which I would require only bulkadmin server role from an external java application, because I only need to update rows, insert values or use select queries in the database.

The problem is that, using either the Microsoft JDBC Driver 1.1 or the Java JDBC ODBC Driver and the Windows XP Data Base (ODBC) configurations, I need a user with sysadmin server role inside Sql Server, otherwise JDBC won't connect to the database using the selected user. Even if I leave the sql login with setupadmin or any server role lower than sysadmin, the connection is refused.

Is there no way to connect using JDBC to MS Sql Server 2005 other than granting the connected user sysadmin rights? My code looks as follows:




Code Snippet

String driver = "com.microsoft.sqlserver.jdbc.SQLServerDriver";
String url = "jdbc:sqlserver://FIREBLADE\SQLEXPRESS";
String user = "username";
String password = "password$$";
Connection conn;

Class.forName(driver);
conn = DriverManager.getConnection(url,user,password);
if (conn != null)
System.out.println("SQL Server Connection established ...");

I have heard that Java JDBC connections to Microsoft require high-level access.

Any informed answer is more than welcome. Thanks for reading my post!

View 1 Replies View Related

Is Microsoft Free* Elearning For Sql Server 2005 Useful For Learning SQL Server 2000?

Feb 13, 2006

I'm working towards MCAD and as elective I want to do the SQL Server course. The exam is on SQL Server 2000.  I was just wondering whether the online course that Microsoft currently have a available for free at https://www.microsoftelearning.com/sqlserver2005/default.aspx would be useful and applicable to SQL Server 2000, or whether it is sufficiently different product to make it confusing to use this as a learning resource.
Also if anyone can point me toward any webcasts for SQL Server that would be great. I listened to Fritz Onion's 15 part series when I studied  for my ASP.NET exam and would like to do something similar for SQL Server 2000 if any are available. 
 

View 3 Replies View Related

[Microsoft][ODBC SQL Server Driver][SQL Server]'ISPALUSER' Is Not A Recognized Functi

May 25, 2006

When I try to export a database using DTS I get the following error message :

[Microsoft][ODBC SQL Server Driver][SQL Server]'ISPALUSER' is not a recognized function name.

Does anyone know what this means?

The database I am trying to export is a Publisher database being used to push replication data.

View 1 Replies View Related

Database 4 Cannot Be Autostarted During Server Shutdown Or Startup. (Microsoft SQL Server, Error: 904)

May 5, 2008

Hi,

I'm from Argentina, I'm running SQL Server 2005 Express. I can connect to SQL Server via Management Studio and see all my db but I don't have acces to them !!

The system gives me the following error when trying to expand all folders:

Database 4 cannot be autostarted during server shutdown or startup. (Microsoft SQL Server, Error: 904)

Any ideas??

Thanks from Argentina

View 3 Replies View Related

Notification Services Failed To Open A Connection To SQL Server.Server Name:ABC(Microsoft.SqlServer.NotificationServices)

Jan 10, 2007



I am getting the above error when I try to create Notificatioin services new Instance.

Additional Information is

Failed to connect to server ABC(Microsoft.SqlServer.ConnectionInfo)

An error occured while establishing connection to the server.When connecting to SQL Server 2005, this failure may be caused by the fact that under default settings SQL Server deoes not allow remote connections.(Provider : Named Pipes Provider, error 40 -could not open connection to SQL Server)(Microsoft SQL Server error: 53)

Please help me I am new to SQL Server 2005.I can't able to proceed.

















View 6 Replies View Related

How To Connect Remote SQL Server Using Microsoft SQL Server Web Data Administrator

Jun 18, 2004

I want to connect to company's SQL Server from home and to connect to home's SQL server from company remotely.
The new released SQL Server Web Data Administrator by Microsoft seems solving my issue.
I use it to connect to different SQL servers in different domains company wide successfully, but I failed to connect to home from company( I have static IP on the home server).
Also I want to know how to configure the sever name if I want to connect to company's SQL Server from home. The company SQL server is inside the firewall with a internal IP. How it works?

Any ideas?

Thanks!

View 4 Replies View Related

[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) Could Not Be Prepared.

Feb 1, 2007

I am using PowerDesigner to reverse engineer a SQL 2000 database. I am getting the following error. I can't find out what this error means. Does anyone know?

Unable to list the users. [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. SQLSTATE =37000

View 1 Replies View Related

Microsoft SQL Server 2005 Management Studio - Opening SQL-File From Explorer Does Not Connect Automaticly To Server/database

Apr 25, 2008

hello,

I have a question about opening files in the Microsoft SQL Server 2005 Management Studio.

In the old Query Analyzer from SQL 2000 I can open SQL Files via drag & drop (from explorer to QA) or open it with a double click in the explorer. Then the Files opened, if I had actual a connection to a server / database (QA is stared with one file and has a connection to Server/Datebase), with this connection.

Now in Microsoft SQL Server 2005 Management Studio I'll be asked everytime for Server and have to get the database from the database list - it does not connect automaticly to server/database, that is actual connected (I have opened a file with the connection and a connected database in the object explorer).

Someone do not have this problem - but we found no option to set it up.

Any ideas?

thanks &
best regards,
Christian Kiedels

View 9 Replies View Related

Microsoft Sql Server Smo

Aug 24, 2007

Im trying to use
Microsoft.SqlServer.Management.Smo
to load a dropdown of available sql server databases.
On my computer it works fine but when i try and run the application on my virtual it throws and unhandled exception that it couldn't load SMO assembly. I know this is because 2005 isn't installed on my virtual but i want to be able to catch this error and just ignore it and load a blank dropdown. I tried putting try catch blocks around the load but it still errors. I then tried instead of importing it i tried to reference smo by using the whole name inside of my try catch block.
 Does anyone know how to catch this errorTry
' Create a new connection to the selected server name

Dim srvConn As New Microsoft.SqlServer.Management.Common.ServerConnection(txtServerName.Text)
Dim srvSql As Microsoft.SqlServer.Management.Smo.Server

' Log in using SQL authentication instead of Windows authentication
srvConn.LoginSecure = False
' Give the login username
srvConn.Login = txtUserID.Text
' Give the login password
srvConn.Password = txtPassword.Text
' Create a new SQL Server object using the connection we created
srvSql = New Microsoft.SqlServer.Management.Smo.Server(srvConn)
' Loop through the databases list
For Each dbServer As Microsoft.SqlServer.Management.Smo.Database In srvSql.Databases
' Add database to combobox
txtDatabase.Items.Add(dbServer.Name)
Next
Catch ex As Exception
MsgBox(ex.Message)
End Try 

View 2 Replies View Related

Help! Microsoft SQL Server

Aug 26, 2006

Hi.
I use Microsoft SQL Server. I wanna change the location where databases is saved. Default location is C:Program FilesMicrosoft SQL ServerMSSQLData. How can i change this?

Thank u in advance.

View 4 Replies View Related

Error String: [Microsoft][ODBC SQL Server Driver][SQL Server]Login Failed For User '(null)'. Reason: Not Associated With A Trus

May 14, 2008



Hi all

This Job ran yester day fine,to day It got failed with this error

any suggestion to troubleshoot problem is appreciated.


DTSRun OnError: DTSStep_DTSTransferObjectsTask_1, Error = -2147203052 (80044814)

Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.

Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)

Help file: SQLDMO80.hlp

Help context: 1131



Error Detail Records:



Error: 0 (0); Provider Error: 0 (0)

Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.

Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)

Help file: SQLDMO80.hlp

Help context: 1131



DTSRun OnFinish: DTSStep_DTSTransferObjectsTask_1

DTSRun: Package execution complete.

View 3 Replies View Related

[Microsoft][ODBC Server Driver][Sql Server] Blabla

Apr 14, 2008

I have an app developed in VB6. This calls some of sps in sql server.

Most of the times it behaves properly by NOT showing PRINT statements written in the stored procedure but some times it shows.

[Microsoft][ODBC Server Driver][Sql Server] 'blah blah'

'blah blah' is the message/text I print my stored procedure.

I don't know exact behavior that when PRINT in makes client apps calling will show it and when it won't show. May be I forgot


Note: These are the sps called both from GUI application and from query window. so I can't avoid using PRINT in these sps. I am using ADODB


Thanks

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved