Microsoft SqlServer Desktop Engine Connection Problem
Mar 15, 2004
i installed the MSDE2000A on server and i tried to connect from client machine through vb Application using connection string. Server anad client are in LAN. but Some systems able to connect and some systems are unable to connect.
i am getting the error:
"SqlServer does not exist or access denied "
for non connected machines.
the server is listening from these machines. but not connecting to MSDE.
can anyone give me solution what may be the cause.
Hello, I'm trying to install Microsoft SQL Server Desktop Engine (MDSE) and it said that I require a SA Password. I can't figure out how to do this. Can anybody help? Thanks, Shenra
Trying to install Microsoft SQL Server 2000 Desktop Engine on my laptop. I downloaded the software and opened it to a folder on the C drive. Then from the command prompt I entered this:
The program starts to install and seems to get near to the end of instal and then the progress bar starts going backwards and nothing gets installed....any ideas of what I'm doing wrong....I really don't know anything about this at all.
i'm chanaka my problem is i had a wsus 2.0 version server, last week my server disk was full, finaly i was move the Wsus data to new disk.with all the contens. when i try to move the datbase it's give the error.
when i open the wsus admin console it's give the error message. and it's add the event log error also. this thing is giving to me big problems.
Connection to database failed. Reason=Unknown error.. Connection string: Data Source=EMAIL-FILTERWSUS;Initial Catalog=SUSDB;Connection Timeout=60;Application Name=WSUS SQL Connection;Trusted_Connection=Yes;Pooling='true'; Max Pool Size = 100
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
if u can give me help. . please if u can give me help.
During installation of MSDE the installation hangs at "please wait while Windows configures microsoft sql server desktop engine" I always end up killing the installation process. I am trying to install Windows XPe dev kit and this is the step I am getting stuck on. If I try to skip this step and setup the database the setup obviously tells me that i dont have sql 200 or MSDE installed.
The KB article http://support.microsoft.com/kb/811479 describes the syptoms perfectly, but fast user switching isnt even enabled for this machine and is not the source of the problem.
Am very new to MS SQL adminstration Can anybody help me out how to work on Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A just for the practice.
The activity which am going to workout on MSDE is below.
How to install SQL(on XP) How the layout will be(like if i insall MSDE what are all Application will be and how they depends on each other) How to create/delete tables if so, how can we do it either by GUI or CUI
Hi there,I sincerely hope that someone out there can help. I have twoinstances of the SQL 2000 Desktop Engine running. One is on my localmachine for development and the other is on another machine on ournetwork which is the production environment. I have built an Access2003 front end application which connects to this database. Thisworks fine locally, as you would expect. I successfully installed thedatabase on the production machine and am able to connect to it viaAccess 2003 (using the Data Link Properties window) and from thirdparty database manager software (similar to Enterprise Manager). I amnot able to to connect to the database via my application.I am using the "sa" account with a strong password. This is myconnection string:strConnection = "Provider=sqloledb;DataSource=server02;UserId=sa;Password=strong;Initial Catalog=Test"The error I'm getting is:"Connection cannot be used to perform this operation. It is eitherclosed or invalid in this context."The connection string is the only thing that changes in my code when Iswitch from my local to my production database. Is there some reasonthat I can't use the "sa" account in this fashion that I'm not awareof? I'd rather not use integrated security for simplicity's sake asthis is a small, internal application. Also, I would have thoughtthat if that was the issue, I couldn't use "sa" at all, even locally.I'm going to post to the Access group as well but thought someone heremight have some advice to offer as well.Thanks,Barb
try { // Establish the connection. Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver"); con = DriverManager.getConnection(connectionUrl,"ifc2","password");
com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source) at java.sql.DriverManager.getConnection(DriverManager.java:512) at java.sql.DriverManager.getConnection(DriverManager.java:171) at connectURL.main(connectURL.java:43)
I am using the code example that came from Microsoft for making a JDBC connection. I looked at my configuration of SQL Server and change to use a static port 1433. I shut off Windows firewall to make sure it was not blocking communication.
When I try to telnet to port 1433 it says
Connecting To 1433...Could not open connection to the host, on port 23: Connect failed
I am getting the above error when I try to create Notificatioin services new Instance.
Additional Information is
Failed to connect to server ABC(Microsoft.SqlServer.ConnectionInfo)
An error occured while establishing connection to the server.When connecting to SQL Server 2005, this failure may be caused by the fact that under default settings SQL Server deoes not allow remote connections.(Provider : Named Pipes Provider, error 40 -could not open connection to SQL Server)(Microsoft SQL Server error: 53)
Please help me I am new to SQL Server 2005.I can't able to proceed.
I have a few questions about the SQL Server Desktop Engine (MSDE), sorry there are so many ..
1. Which software products does this come with ? 2. If I create a SQL Server Database and want to distribute it to clients, how do I actually do it with MDSE ? 3. If I need to "upgrade" my database at some point in the future (that may contain data at a client site) how would I go about getting all the data out - would I need to write an external app ? 4. What are it's pros and cons when compared to installing full SQL Server on a client site ? 5. I've heard that the preformance of an MSDE Database degrades severely after more than 5 concurrent connections, is this just due to the performance of the product or is it something to do with the licencing model ? 6. Is it possible to write applications in, say VB, to alter the database once it has been installed on client site e.g. modify/create tables, indexes, stored procedures ?
I was looking at the registry key value "ConcurrentLimit" in "HKEY_LOCAL_MACHINE'SOFTWAREMicrosoftMicrosoft SQL Server80MSSQLLicenseInfoMSSQL8.00"
and wondering if this the concurrency control of SQL Server. Can someone please verify??
One of our SQL Production Server I inherited was installed with this version by mistake. The value for this key was set to 2. Does this mean it only allows 2 concurrent access to the SQL Server??
This week I was told to setup MSDE Desktop Engine on my pc bcz my Access back end db is getting bigger in size. And as a little advance step, I decided to put my Access back end on SQL server.
To be frank, I have no experience with SQL server but after reading the instructions, I have installed MSDE (latest version) on my pc successfully. A small icon of SQL server appeared nearby clock icon of my pc showing the SQL server is running on ASHFAQUEPC.
I shifted a Trial db onto this server in following way.
Considering the opened Trial db would be my BE, from the Tools---Database Utility---Upsize wizard, I followed below steps according to Upsize wizard.
1.I selected ‘Local’ server and check marked to ’Use Trusted Connection’. 2.And then I selected some tables to export 3.Kept all default attributes of db as it is 4.Selected ‘Let the wizard decide’ under data option to include. 5.At the next step ‘What application change do you want to make? a.Create a new Access client/Server application. b.Link SQL Server tables to existing application. c.No application changes. (I selected this option)
Then it showed me the report of my db description of changes that were made after deploying it. The report I did not print bcz it was a trial db with one table (2 fields) and a simple query.
My idea was to connect my Trial BE with another one of another Access mdb file so FE would be Access and BE would be from MSDE.
1.Now I don’t know how to link my BE to my FE? 2.From where I can directly see my BE? Because SQL Server Service Manager does not have any menu? 3.Where I was wrong in following steps?
Can someone advise me if this is basically SQL server 2000 and will work effectively to simulate sql server on a stand alone development machine ? Is this what its meant for?
I'm in the process of attempting to install Microsoft SQL Server Desktop Engine on my computer in support of an email program call Mailloop6. I've tried going through their tech support but they haven't been able to figure it out.
I'm running Windows XP with SP1 upgrade on a DSL connection.
When I installed the program the first time, I got the following error:
"Setup failed to configure the server. Refer to the server error logs and setup error logs for more information."
The program obviously wouldn't install. I contacted the vendor and they sent a version with a batch file. Same result. I removed all the appropriate registry entries between installs and removed all the data files as well.
I've tried installing the program using the free MDSE download from the MS site with the following result:
"A Strong SA password is required for security reasons. Please use SAPWD switch to supply the same. Refer to readme for more details. Setup will now exit."
Here's the error log that I got after attempting to install:
2004-02-25 19:31:42.55 server Microsoft SQL Server 2000 - 8.00.760 (Intel X86) Dec 17 2002 14:22:05 Copyright (c) 1988-2003 Microsoft Corporation Desktop Engine on Windows NT 5.1 (Build 2600: Service Pack 1)
2004-02-25 19:31:42.55 server Copyright (C) 1988-2002 Microsoft Corporation. 2004-02-25 19:31:42.55 server All rights reserved. 2004-02-25 19:31:42.55 server Server Process ID is 3404. 2004-02-25 19:31:42.55 server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL$MAILLOOP6LOGERRORLOG'. 2004-02-25 19:31:42.56 server SQL Server is starting at priority class 'normal'(1 CPU detected). 2004-02-25 19:31:42.60 server SQL Server configured for thread mode processing. 2004-02-25 19:31:42.60 server Using dynamic lock allocation. [500] Lock Blocks, [1000] Lock Owner Blocks. 2004-02-25 19:31:42.63 spid3 Warning ****************** 2004-02-25 19:31:42.63 spid3 SQL Server started in single user mode. Updates allowed to system catalogs. 2004-02-25 19:31:42.63 spid3 Starting up database 'master'. 2004-02-25 19:31:42.91 server Using 'SSNETLIB.DLL' version '8.0.766'. 2004-02-25 19:31:42.94 spid5 Starting up database 'model'. 2004-02-25 19:31:43.24 server SQL server listening on 152.163.0.0: 4113. 2004-02-25 19:31:43.24 server SQL server listening on 172.16.1.33: 4113. 2004-02-25 19:31:43.24 server SQL server listening on 127.0.0.1: 4113. 2004-02-25 19:31:43.25 spid3 Server name is 'MONSTERMAILLOOP6'. 2004-02-25 19:31:43.25 spid3 Skipping startup of clean database id 5 2004-02-25 19:31:43.25 spid3 Skipping startup of clean database id 6 2004-02-25 19:31:43.25 spid3 Starting up database 'msdb'. 2004-02-25 19:31:43.56 spid5 Clearing tempdb database. 2004-02-25 19:31:44.13 spid5 Starting up database 'tempdb'. 2004-02-25 19:31:44.17 spid3 Recovery complete. 2004-02-25 19:31:44.17 spid3 SQL global counter collection task is created. 2004-02-25 19:31:44.19 spid3 Warning: override, autoexec procedures skipped. 2004-02-25 19:31:47.75 server SQL server listening on TCP, Shared Memory, Named Pipes. 2004-02-25 19:31:47.75 server SQL Server is ready for client connections 2004-02-25 19:31:57.97 spid3 SQL Server is terminating due to 'stop' request from Service Control Manager.
Any thoughts on this would be very much appreciated!
Hi, what is the distribution fee for SQL Server 2005 Desktop Engine distribution? Where can I find this information? I don't need it for development only for distribution.
My coworker tried install SQL server 2005 on a server. The server already has a desktop engine running as "MSSQLServer". Because the new sql server 2005 need running as a default instance. So he still using "MSSQLServer" as the instance name.
After installation, the service's running file seems still point to the old location. When view the properties on Management studio, it still report as "desk top engine" and the version is 8.xx..xxxx.
My question is, 1. What has been done during the installation? Is current desktop engine was upgraded? 2. In current situation, what can we do to install the SQL server 2005 as a default instance. Is there way to rename the desktop engine to a named instance?
I have SQL Server 2000 installed on my laptop and am trying to install an instance of MSDE. I keep getting the error message: "The installation of SQL Server 2000 Desktop Engine has failed. Please see the Getting Started manual for further instructions."
I have done this installation before on other machines. Something must be corrupt on my machine (?). The error message is not very enlightening. Any ideas?
I have got SQL Server Desktop Engine running with 2 database and I need to install the evaluation version of SQL Server 2005 instead. A straight upgrade does not seem to be possible. Does someone know if backing up the databases, uninstalling the desktop engine, installing SQL Server 2005 and then importing/restoring the databases would be an option to look into?
i just finished my program and i am making a setup for it but the db is MSSQL SERVER 2005. the home users how will they use sql server 2005? is there any thing like sql server 2000 desktop engine? something like that... shortly the user don't have to know sql server and settings of it so how will we do it???
Do you believe that SqlServer Express can work absolutely without any administration? That is to say: my clients are people without any technical knowledge and they usually communicate never with me. Is SSE the correct database for this status, or should I use a desktop database like VFP or Access?
How do I add login user ASPNET to my SQL 2000 Desktop Engine Server?. I can not find the "Server Manager" in the Start - Programs. Is there any other way to get around adding ASPNET login to the SQL server so I can test my VB program. I got the error: Login failed for user 'com_nameASPNET'.
...works on my device, but on my computer it gives SqlCeException with message: The database file cannot be found. Check the path to the database. [ File name = Program FilesTreeNotesTreeNotes.sdf ]
I've tried all sorts of things, but the computer just can't find the database. I've even tried putting a copy of the database into... C:Program FilesTreeNotesTreeNotes.sdf...hoping that the computer will find it there.
Hello ! How can I install on Microsoft SQL Server Express 2005 Full-Text Search Engine ? I tried to create a full_text_catalog with SQL Server Management Studio Express and I get an error. Msg 7609, Level 17, State 100, Line 2 Full-Text Search is not installed, or a full-text component cannot be loaded.
I am looking for a way to script out all tables within a SQL Server 2005 database using VB.NET. I am writing a backup utility and have been able to do stored procedures, the data within the tables, but am now stuck on scripting out the tables with their primary keys, indexes, etc. Sure, I could hard-code some stuff like "CREATE TABLE dbo" & strTable, but I am pretty sure there is a way to do it within VB.NET using SMO. So, any help that someone could offer is greatly appreciated. Thanks
Stupid question. I'm trying to reference Microsoft.SqlServer.ManagedDTS, which allegedly is to be found in Program FilesMicrosoft SQL Server90SDKAssemblies. Except it isn't. Nor is it anywhere on the machine. I know that Integration Services is installed and running - my packages run just fine out of BIDS and via dtexec. Yet I can't find the stupid dll. Clearly I've missed something. Any ideas?
I am trying to launch a SSIS package remotely, and found this article http://technet.microsoft.com/en-us/library/ms403355.aspx#agent
however, i cannot add a reference to Microsoft.SqlServer.DTS.Runtime ? My Visual Studio 2005 interface does not show that as a possible reference when using "Add Reference"
I'm trying to run a piece of code in BOL and it imports the dts.runtime class. The problem is when I do the import statement in my form, I get the green line. It can't find the class. The only class found inside SqlServer is Server.
Can anyone tell me why the DTS class isn't there. The box I'm working on has visual studio 2005, and Yukon sp2. And I think I'm running v.3 of the framework, so I should be good all the way around.
