This is when i try to submit a new database item in Dreamweaver. The DB I am using is SQL Server 2005.
My code is as follows:
Dim equipspec__urlid
equipspec__urlid = "1"
If (QueryString("ID") <> "") Then
equipspec__urlid = QueryString("ID")
End If
%>
<%
Dim equipspec
Dim equipspec_numRows
I am executing an SSIS package from VB.NET code. Works great in design mode. When I publish it (using Click-Once), it works great on development computer but fails on a customer computer:
Microsoft.SqlServer.Dts.Runtime.DtsPipelineException: Retrieving the COM class factory for component with CLSID {E80FE1DB-D1AA-4D6B-BA7E-040D424A925C} failed due to the following error: 80040154. ---> System.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {E80FE1DB-D1AA-4D6B-BA7E-040D424A925C} failed due to the following error: 80040154. at Microsoft.SqlServer.Dts.Runtime.Package..ctor() --- End of inner exception stack trace --- at Microsoft.SqlServer.Dts.Runtime.Package..ctor()
My project references Microsoft.SQLServer.ManagedDTS.
The error occurs on the following line:
Dim objPackage As New Microsoft.SqlServer.Dts.Runtime.Package
Looking at various forum threads, it would appear that it's because either (1) DLL(s) are not registered on the customer machine, or (2) DLL(s) are missing from the customer machine. The first explanation doesn't seem right -- even though Microsoft.SQLServer.ManagedDTS is a COM dll, doesn't .NET provide a wrapper when it references it? I downloaded Process Explorer from Sysinternals.com to compare loaded DLLs on my dev box to those on the customer's box and while several dlls are loaded when the line is successfully loaded, all of them exist on the customer box.
I have a very small project written in VB.Net 2005 using the SQL Server 2005 SSiS DTSx package.
I migrated a SLQ 2000 DTS package using the SQL 2005 Legacy tools and saved the package as a local .DTSx package on our file server.
I need to run the package from a clients PC.
I added the reference Microsoft.SqlServer.ManagedDTS so I could then use the Microsoft.SqlServer.Dts.Runtime so I can execute the commands:
Dim oApp As New Application Dim oPkg As New Package oPkg = oApp.LoadPackage(g_DTSx_Directory & "AOC copy Generic1 CSV to AOC_verify_file_1.dtsx", Nothing) Dim oResults As DTSExecResult oResults = oPkg.Execute
Ok. That works fine and is basically the entire app. It executes without a hitch in debug and as a compiled exe on my PC, but I have all the tools. So now I try and create a setup project for this and I use the setup wizard.
During the creation of the setup project I get a message that states: The following files may have dependencies that cannot be determined automatically. Please confirm that all dependencies have been added to the project. C:windowssystem32msxml6.dll
OK. The dll is part of the reference I mentioned above and I have no idea what other dependencies it may have.
How do I find this out?
Has anyone else created a project like this and experenced the same?
I am on a clean build running WinXP Pro with SP2 - VS2005 with SP1 and the SQL Server 2005 tools.
Hello All,I am getting the following error when attemping to open a table inSQL2kSP3a.________________________________________SQL Server Enterprise ManagerDatabase Server: Microsoft SQL ServerVersion: 08.00.0760Runtime Error: [Microsoft][ODBC SQL Server Driver]Invalid time format_________________________________________I cannot find it in sysmessages, or on the web.Any ideas about how to resolve this? And how it occured...Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
I am trying to launch a SSIS package remotely, and found this article http://technet.microsoft.com/en-us/library/ms403355.aspx#agent
however, i cannot add a reference to Microsoft.SqlServer.DTS.Runtime ? My Visual Studio 2005 interface does not show that as a possible reference when using "Add Reference"
I'm trying to run a piece of code in BOL and it imports the dts.runtime class. The problem is when I do the import statement in my form, I get the green line. It can't find the class. The only class found inside SqlServer is Server.
Can anyone tell me why the DTS class isn't there. The box I'm working on has visual studio 2005, and Yukon sp2. And I think I'm running v.3 of the framework, so I should be good all the way around.
It states pretty clearly in the documentation for the Microsoft.SqlServer.Dts.Runtime.Wrapper namespace that "This assembly is a Primary Interop Assembly (PIA) for the namespace Microsoft.SqlServer.Dts.Runtime, which is the assembly Microsoft.SqlServer.ManagedDTS (in microsoft.sqlserver.manageddts.dll). The classes in this namespace should not be instantiated. Instead, use the classes found in the Microsoft.SqlServer.Dts.Runtime. "
And yet as I have found out earlier today and talked about here, sometimes it is absolutely necassary to use Microsoft.SqlServer.Dts.Runtime.Wrapper. Why is this? Why is there no class in Microsoft.SqlServer.Dts.Runtime that allows me to access the specific connection managers rather than using the generic ConnectionManager class?
I have an ASP.NET web form that calls out to a component which includes the following code which leverages the Application and Package classes in the Microsoft.SqlServer.Dts.Runtime namespace:
Microsoft.SqlServer.Dts.Runtime.DTSExecResult result = package.Execute();
I am logged in to the app as DomainMe.
I have Windows Integrated Authentication configured in IIS and am using Windows Authentication in ASP.NET. I am using impersonation to impersonate a fixed identity, say DomainBob. This has the following effect:
WindowIdentity.GetCurrent() returns DomainBob as expected since the process is being impersonated by DomainBob.
Thread.CurrentPrincipal.Identity.Name returns DomainMe as expected since the ASP.NET application is using Windows Authentication.
The id variable successfuly is initialized to the GUID of the package, proving that the package name is resolving, however, from the ASP.NET application, the package fails.
Issuing the ? package.Errors[0] command at the command window provides the following information:
{Microsoft.SqlServer.Dts.Runtime.DtsError} base {Microsoft.SqlServer.Dts.Runtime.DtsObject}: {Microsoft.SqlServer.Dts.Runtime.DtsError} Description: "An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Shared Memory Provider: I/O Error detected in read/write operation [4]. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'MyMachine\ASPNET'.". " ErrorCode: -1071636471 HelpContext: 0 HelpFile: null IDOfInterfaceWithError: "{8BDFE898-E9D8-4D23-9739-DA807BCDC2AC}" Source: "Packages MyPackage" SubComponent: "Connection manager "DataMart"" TimeStamp: {12/21/2006 2:18:55 PM}
For some reason, the ASPNET process account is being passed to the package!
This makes no sense, because clearly, DomainBob is impersonating the worker process and all downstream resources should be accessed via DomainBob. This includes SQL Server Database Engine and I would imagine SSIS as well. ASPNET should not come into play at all since I am impersonating.
I also tried using regular (non-fixed identity) impersonation (<identity impersonate="true" />), but again, SSIS is trying to authenticate ASPNET, instead of DomainMe as would be expected.
This is definetely isolated to ASP.NET applications, because making the same call from within a unit test succeeds. It would seem that this is a definete issue because the behavior is inconsistent with ASP.NET security principles.
Has anyone else seen this problem?
Any direction or suggestions very much appreciated.
I am struggling in calling an SSIS package programatically using the Microsoft.SqlServer.Dts.Runtime namespace.
I am succesfuly connecting to the package insofar as I am able to retrieve the package ID (GUID), but when I call package.Execute I get a 'login failed for user' error, which indicates a security problem.
My ASP.NET app is running as a domain user which has temporary 'SA' rights on the server where the package is hosted. In addition, I have set the protection level on the package to 'DontSaveSensitive'.
What am I missing to be able to execute the package remotely?
I´m wondering how to make a connection to a file in differents machines, FTP, excel file, HTTP, WebService instead of OLDDB, where can I find a reference for the constants that must be used in each case.
Hello, I got an exception when I try to load/run a SSIS Package programmatically on the server using remoting. The client machine has no SQL Server 2005 component installed..
This is the error I get from my exe application:
Microsoft.SqlServer.Dts.Runtime.DtsPipelineException: Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154. ---> System.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154. at Microsoft.SqlServer.Dts.Runtime.Application..ctor()
And this the Remote component:
<Serializable()> Public Class SSISComponent
Inherits MarshalByRefObject
Public Function LaunchPackage(ByVal sourceLocation As String, ByVal serverName As String, ByVal packageName As String, ByVal packageVariables As SortedList) As Microsoft.SqlServer.Dts.Runtime.DTSExecResult
Dim packagePath As String Dim myPackage As Package Dim integrationServices As New Application ' Combine path and filename. packagePath = Path.Combine(sourceLocation, packageName) Try If integrationServices.ExistsOnDtsServer(packagePath, serverName) Then myPackage = integrationServices.LoadFromDtsServer(packagePath, serverName, Nothing) Else Throw New ApplicationException( "Invalid package name or location: " & packagePath) End If If Not packageVariables Is Nothing Then For Each de As DictionaryEntry In packageVariables myPackage.Variables(de.Key).Value = de.Value Next End If LaunchPackage = myPackage.Execute() Catch ex As Exception Throw End Try End Function End Class
This is the code that call the remote component to run the package on the Server: Public Class Test Private Function LoadAndRunPackageRemotly(ByVal PackageName As String, ByVal PackageVariables As SortedList) As Boolean
Dim launchPackageService As New SSISComponent Dim packageResult As Microsoft.SqlServer.Dts.Runtime.DTSExecResult Try packageResult = launchPackageService.LaunchPackage(Me.SSISPackageLocation, Me.SSISServerName, PackageName, PackageVariables) If packageResult = DTSExecResult.Success Then LoadAndRunPackageRemotly = True Else LoadAndRunPackageRemotly = False End If Catch ex As Exception Throw End Try End Function End Class
I would like to inform that everything run inside a thread because the Package do a lot of things... When I build up the setup for the exe inside the Detected Dependencies there are several DLL related to SQL Server (Microsoft.SQLServer.DTSRuntimeWrap.dll etc..etc..) that I don't register .. Tis could be the problem? If yes, somebody can tell me which one I have to register ? as COM or COMRelativePath? Some other hints?
This error could be also caused by wrong permissions on the ssis? Thank you very much for any help... p.s. To use sql server agent will be my last option!! Marina b.
What I am trying to do is instead of Opening the Access application and run the macro manually, i converted the macro to VB and created an ActiveX Script Task package in SQL2000 and Copy and Paste the VB Code to ActiveX Script Task. But it didn't work. Is there a work around for this?
here is my code the falue of pr_h_reqby is "Test" Dim strconn As New SqlConnection(connstring) Dim myReqdata As New DataSet Dim mycommand As SqlDataAdapter Dim sqlstr As String = "select pr_H_reqby from tbl_pr_header where pr_h_recid = " & recid & "" mycommand = New SqlDataAdapter(sqlstr, strconn) mycommand.Fill(myReqdata, "mydata") If myReqdata.Tables(0).Rows.Count > 0 Then 'lblReqID.Text = myReqdata.Tables(0).Rows("reqid").ToString lblNameVal.Text = myReqdata.Tables("mydata").Rows("pr_H_reqby").ToString() lblEmailVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqemail").ToString() lblReqDateVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqdate").ToString() lblneedval.Text = myReqdata.Tables("mydata").Rows("pr_h_needdt").ToString() lblDeptval.Text = myReqdata.Tables("mydata").Rows("pr_h_dept").ToString() txtbxReqDesc.Text = myReqdata.Tables("mydata").Rows("pr_h_projdesc").ToString() End If
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
I'm running a package on SQL Server 7, SP2 created in the same environment. When running a package from DTS Designer, I get an execution status of "Error Occurred" in the Package Execution Status dialog on one of the data pump tasks I'm running along with the number of rows inserted. When I double-click on the task, I get the following message: " The Connection is currently being used by a task. The connection cannot be closed or reused".
Both the exception log for the task and the package, specified for error output, indicate the task ran successfully and the clients confirm that the appropriate number of rows have been inserted in the table. Has anyone encountered this error that can explain the cause/cure?
Hi, I am trying to create a DTS package dynamically. I have taken all these steps i.e., 1. SN.EXE -K c:DTS.KEY2.tlbimp.exe "C:program filesmicrosoft SQL Sever80ToolsBindtspkg.dll" /out:c:Microsoft.SQLServer.DTSPkg80.dll /Keyfile:c:DTS.KEY3.gacutil.exe -i C:Microsoft.SQLServer.DTSPkg80.dll. Now when i compile the code, i didnt get any compilation error. But when execute the code it gives me a runtime error which goes as given below : An unhandled exception of type 'System.InvalidCastException' occurred in DTSFactory.exe Additional information: QueryInterface for interface Microsoft.SQLServer.DTSPkg80.CustomTask failed. I am getting this error near the line : oCustTask = (DTS.DataPumpTask2)oTask.CustomTask; The following is the code. using System; using System.Drawing; using System.Collections; using System.ComponentModel; using System.Windows.Forms; using System.Data; using DTS = Microsoft.SQLServer.DTSPkg80; namespace DTSFactory { /// <summary> /// Summary description for Form1. ///This is assuming that all steps have been taken in the following document: ///http://SQLDEV.NET/DTS/DotNetCookBook.htm ///SN.EXE -K c:DTS.KEY ///tlbimp.exe "C:program filesmicrosoft SQL Sever80ToolsBindtspkg.dll" /out:c:Microsoft.SQLServer.DTSPkg80.dll ///Keyfile:c:DTS.KEY ///gacutil.exe -i C:Microsoft.SQLServer.DTSPkg80.dll ///These steps are needed for interop with dtspkg.dll /// </summary> public class Form3 : System.Windows.Forms.Form { /// <summary> /// Required designer variable. /// </summary> private System.ComponentModel.Container components = null; private System.Windows.Forms.Button button1; public DTS.Package2Class pkg = new DTS.Package2Class(); public Form3() { // // Required for Windows Form Designer support // InitializeComponent(); // // TODO: Add any constructor code after InitializeComponent call // } private void Form3_Load(object sender, System.EventArgs e) {
1. Can someone help me? I am running an eCommerce website using SQL Server 2000, as of last week it was working just fine, today I try to access the sight and I get the following error below.
I haven't changed anything on the server, the SQL Server services is running so is the agent.
Operation: Creating Engine object Error number: -2147467259 Error source: Microsoft OLE DB Provider for SQL Server DatabaseUtils.OpenCommand DatabaseFile.IsDatabaseByteArrayUpdated SchemaFile.IsDatabaseSchemaUpdated Environment.InitEnvironment, Step: Loading database schema Engine.Init Engine.Refresh Error description: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
I get Invalid object name 'bstr'. when I try to run this querySelect distinct c0.oid, c1.Value, c2.Value, c3.ValueFrom(SELECT oid FROM dbo.COREAttributeWHERE CLSID IN ('{1449DB2B-DB97-11D6-A551-00B0D021E10A}','{1449DB2D-DB97-11D6-A551-00B0D021E10A}','{1449DB2F-DB97-11D6-A551-00B0D021E10A}','{1449DB31-DB97-11D6-A551-00B0D021E10A}','{1449DB33-DB97-11D6-A551-00B0D021E10A}','{1449DB35-DB97-11D6-A551-00B0D021E10A}','{1449DB37-DB97-11D6-A551-00B0D021E10A}','{1449DB39-DB97-11D6-A551-00B0D021E10A}','{1449DB3B-DB97-11D6-A551-00B0D021E10A}','{1449DB3D-DB97-11D6-A551-00B0D021E10A}','{1449DB3F-DB97-11D6-A551-00B0D021E10A}','{1449DB43-DB97-11D6-A551-00B0D021E10A}','{1449DB45-DB97-11D6-A551-00B0D021E10A}','{1449DB47-DB97-11D6-A551-00B0D021E10A}','{1449DB49-DB97-11D6-A551-00B0D021E10A}','{1449DB4B-DB97-11D6-A551-00B0D021E10A}','{1449DB4D-DB97-11D6-A551-00B0D021E10A}','{1449DB51-DB97-11D6-A551-00B0D021E10A}','{DAA598D9-E7B5-4155-ABB7-0C2C24466740}','{6921DAC3-5F91-4188-95B9-0FCE04D3A04D}','{128F17D4-2014-480A-96C6-370599F32F67}','{9F3A64C9-28F3-440B-B694-3E341471ED8E}','{2E3AB438-7652-4656-9A18-4F9C1DC27E8C}','{B69E74A7-0E48-4BA2-B4B7-5D9FFEDC2D97}','{2BB836D3-2DC1-4899-9406-6A495ED395C3}','{9CFFDC3A-5DF5-4AD8-B067-6EF5A9736681}','{E18E470B-B297-43D2-B9CD-71AF65654970}','{9BDCDA97-1171-409D-B3AB-71DA08B1E6D3}','{0E91AC62-7929-4B42-B771-7A6399A9E3B0}','{C8BAE335-CCB7-4F1D-8E9D-85C301188BE2}','{97E6E186-8F32-42E6-B81C-8E2E0D7C5ABA}','{BE5B6233-D4E7-4EF6-B5FC-91EA52128723}','{4ECDAAE1-828A-4C43-8A66-A7AB6966F368}','{19082B90-EF02-45CC-B037-AFD0CF91D69E}','{6F76CEF7-EBC0-48C6-8B78-C5330324C019}','{18492042-B22A-4370-BFA3-D0481800BBC7}','{A71343AD-CC09-4033-A224-D2D8C300904A}','{EC10BD0A-FDE3-4484-BEA6-D5A2E456256C}','{F7F8A4E1-651A-4A48-B55A-E8DA59D401B2}','{A923226F-B920-4CFA-9B0D-F422D1C36902}','{A95ACA6A-16AC-47E4-A9A6-F530D50A475A}','{C31DB61A-5221-42CF-9A73-FE76D5158647}')) AS c0 ,(select oid, dispid, valueFROM dbo.COREBSTRAttributeWHERE iid = '{1449DB20-DB97-11D6-A551-00B0D021E10A}') As bstrLEFT JOIN bstr AS c1ON (c0.oid = c1.oid)AND c1.dispid = 28LEFT JOIN bstr AS c2ON (c0.oid = c2.oid)AND c2.dispid = 112LEFT JOIN bstr AS c3ON (c0.oid = c3.oid)AND c3.dispid = 192thanksSunit
My users often view some report for some minutes and after that want to return to parent report. If they did it after small time (~less than minute), everything is OK. But if this pause is above 1 minute they receive "Runtime Error" message and can only to go to homepage.
I think that this is some session time or something like that. Am I right? How can fix it?
I upgraded my primary production server this morning to SQL 2005. Everything went fairly smoothly, but a couple of hours after my installation was complete, I found the following error in my event log:
Source: .NET Runtime Optimization Service EventID: 1101 .NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - Failed to compile: Microsoft.ReportingServices.QueryDesigners, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 . Error code = 0x80070002
I am a little stumped since we did not install Reporting Services. We only installed Database Services, Integration Services and Workstation Components. I'm open to any suggestions on this. This does not seem to be negatively affecting our server, but I do want to resolve it as soon as possible.
We are performing a SQL 2000 to SQL 2005 upgrade on a Windows 2003 SP1 server.
We encountered error in the SQL 2005 upgrade with the following error :
===================================
Common Language Runtime detected an invalid program.
===================================
Common Language Runtime detected an invalid program. (System.Xml)
------------------------------ Program Location:
at System.Xml.Schema.SchemaInfo..ctor() at System.Xml.Schema.XmlSchemaSet..ctor(XmlNameTable nameTable) at System.Xml.XmlReaderSettings.get_Schemas() at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReportController.LoadAndValidateDataFile() at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReport.ValidateDataFile() at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAIssueReport.Refresh() at Microsoft.SqlServer.UpgradeAdvisor.ReportPanel.OpenReport(String reportFile)
From the Event Viewer, under Application, we can see the following error :
I have a defined data source to an oracle server. I've alredy intalled oracle client, and setup my data source to save the user and password. I'm using .NET provider/OracleClient DataProvider Connection. When I click on "Test Connection" Button, SSIS reports SUCCESS. In Connection Manager TAB I created on connection called "OracleServer" from my oracle data source, described above.
In my package, I defined a DataReaderSource task, I specified "OracleServer" as a connection to it. I can preview data and view oracle's columns name..., so it make me think that everything is fine. But when It execute the task it FAIL and notify logon error and that password can't be blank.
My computer is 2 months old and I am using Windows Vista 32. I keep getting an Interactive Services dialog detection box that says 'A Program Cannot display a message on your desktop'. And when I click to see the message
I get a Microsoft Visusal C++ Runtime Library Error that says 'Program C:\Windowssystem32spoolsv.exe'. It says that this application has requested the runtime to terminate in an unusual way.
This error keeps popping up and I don't know how to deactivate it or why it is happening, or what the Interactive Service is. Isn't a system32 file for Windows XP? I think the spoolsv.exe is for a printer, and it looks like the Interactive Service is for networking.....
Can anyone tell me why 1. I keep getting this error message, 2. how to deactivate it, 3. what the Interactive Service is, and 4. if a System32 is an XP file?
I am using SQL Server 2005 Version 9.00.1399.06 (Intel X86).
Whether I try to start a new Integration Services project in Visual Studio or try to import data into a database I receive the following error:
SSIS Runtime Object could not be created. Verify the DTS.dll is available and registered. The wizard can not continue and will terminate.
Unable to cast COM of type 'Microsoft.SqlServer.DTS.Runtime.Wrapper.PackageNeutralClass' to interface type 'Microsoft .SqlServer.DTS.Runtime.Wrapper.IDTSContainer90' This operation failed because the QueryInterface call on the COM component for the interface failed due to the following error: Library not registered. (Exception from HRESULT: 0X80028010) (TYPE_E_LIBNOTREGISTERED)).
I have no idea why I am getting this error and would appreciate any help. I'm sure some of you SQL Server Gurus will know right away.
I am using SQL Server 2005 Version 9.00.1399.06 (Intel X86).
Whether I try to start a new Integration Services project in Visual Studio or try to import data into a database I receive the following error:
SSIS Runtime Object could not be created. Verify the DTS.dll is available and registered. The wizard can not continue and will terminate.
Unable to cast COM of type 'Microsoft.SqlServer.DTS.Runtime.Wrapper.PackageNeutralClass' to interface type 'Microsoft .SqlServer.DTS.Runtime.Wrapper.IDTSContainer90' This operation failed because the QueryInterface call on the COM component for the interface failed due to the following error: Library not registered. (Exception from HRESULT: 0X80028010) (TYPE_E_LIBNOTREGISTERED)).
I have no idea why I am getting this error and would appreciate any help. I'm sure some of you SQL Server Gurus will know right away.
Error: System.Runtime.InteropServices.COMException (0x80040428): Exception from HRESULT: 0x80040428 at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
Can anyone tell what caused this error when I tried to run the DTS package from my SSIS package ?
Using the above connection strings in SSIS design mode, the datasource test succeeds, and an sql select statement in a datasource reader returns the table structure with no error.
However, when I try to run the package, I receive the following error.
SSIS package "Sales Data Load.dtsx" starting. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Error: 0xC0047062 at Data Flow Task, DataReader Source 2 [408]: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction) Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "DataReader Source 2" (408) failed validation and returned error code 0x80131937. Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation. Error: 0xC0024107 at Data Flow Task: There were errors during task validation. SSIS package "Sales Data Load.dtsx" finished: Failure.
Furthermore, I have packages configured in SQL 2000 DTS to use the same system dsn without any errors.
Using the above connection strings in SSIS design mode, the datasource test succeeds, and an sql select statement in a datasource reader returns the table structure with no error.
However, when I try to run the package, I receive the following error.
SSIS package "Sales Data Load.dtsx" starting. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Error: 0xC0047062 at Data Flow Task, DataReader Source 2 [408]: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction) Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "DataReader Source 2" (408) failed validation and returned error code 0x80131937. Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation. Error: 0xC0024107 at Data Flow Task: There were errors during task validation. SSIS package "Sales Data Load.dtsx" finished: Failure.
Furthermore, I have packages configured in SQL 2000 DTS to use the same system dsn without any errors.
I posted this on the .NET Framework inside Sql Server forum as well. Sorry if the cross-post offends anybody.
I upgraded my primary production server this morning to SQL 2005. Everything went fairly smoothly, but a couple of hours after my installation was complete, I found the following error in my event log:
Source: .NET Runtime Optimization Service EventID: 1101 .NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - Failed to compile: Microsoft.ReportingServices.QueryDesigners, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 . Error code = 0x80070002
I am a little stumped since we did not install Reporting Services. We only installed Database Services, Integration Services and Workstation Components. I'm open to any suggestions on this. This does not seem to be negatively affecting our server, but I do want to resolve it as soon as possible.
