Microsoft Ending Support For 6.5
Sep 26, 2001When does Microsoft support for 6.5 end? I am anxious to get rid of my old 6.5s but won't get approval until MS finally pulls the plug.
View 1 RepliesWhen does Microsoft support for 6.5 end? I am anxious to get rid of my old 6.5s but won't get approval until MS finally pulls the plug.
View 1 RepliesDear All,Access adp on sql-server 2000After upgrating to A2003 updating data with 1 perticular combobox causes theprogram to hangs without any error-msg.Traying to change te combobox recordsource i get this error:This version of Microsoft Access doesn't support design changes to theversion of Microsoft SQL Server your project is connected to. See theMicrosoft Office Update Web site for the latest information and downloads(on the Help menu, click Office on the Web). Your design changes will not besaved.The solution in :http://support.microsoft.com/defaul...kb;en-us;313298tolks about SP 'dt_verstamp007' but I have SP 'dt_verstamp006'What should I do.Is the failure of the combobox also caused by the absence of dt_verstamp007???Filip
View 2 Replies View RelatedDoes anyone know when Microsoft is due to end support for 6.5?
View 1 Replies View RelatedHi ,
Does microsoft supports MSDE still or it will support only Sql 2005 Express edition.
Has anyone heard that microsoft is dropping support for their sql language and going just with the ansi standards?
Just curious.
Hello,
I would like to see if Microsoft has issued any announcement on SQL Server 2000 end of support. If anyone is aware of this or seen new posts/articles, please let me know.
Thank you!
I am looking in to using Microsoft Clustering supported in NT Server Enterprise to provide failover support for 2 database servers running SQL Server 7. I was wondering if anyone had any experience with it--good or bad. I read the white paper and it sounds good, but I'd like to get some real
world application experience.
Thanks for any info.
Bob
I was wondering if Microsoft SQL Server support any partitioning method (like range, list, hash or composite partitioning in Oracle) or you have to partition all tables manually?
Thanks in advance,
Bracia
Does Microsoft officially support installing SQL 2005 Express on a server where SQL 2000 Enterprise Edition is already running (a has to keep running).
In case they do, where do i find this official info / note.
Have they released white papers on this matter?
I know it is possible to install the two together and that they can coexist, but I am worried about how the two SQL installations wil behave when being updated with patches, security updates, service packs etc. do you run the possibility of them corrupting each other? Therefor it is vital to know if Microsoft supports the two running on the same system.
I'm trying in vain to upgrade sql server 2000 to 2005 with great headache and pain.
I (finally) have removed all Beta, and other incompatible version of .NET, Visual Studio and any other offending components, and made it to the first page of the install shield.
The .NET 2.0 components installed fine - but I get a fatal error trying to install the SQL Server Set Support Files.
I do have a log file - and have tired searching on the various error codes in it, but am coming up blank. Please advise - this is taking forever!
sample of error msgs in log file:
MSI (s) (B0:E0) [12:33:06:613]: Note: 1: 1935 2: 3: 0x8002802F 4: 5: CreateAssemblyNameObject 6: Microsoft.NetEnterpriseServers.ExceptionMessageBox,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"
MSI (s) (B0:E0) [12:33:06:613]: Product: Microsoft SQL Server Setup Support Files (English) -- Error 2908. The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}.
MSI (s) (B0:E0) [12:33:06:613]: Executing op: ComponentRegister(ComponentId={52723CBD-3400-458C-988A-4D012E6CAEDB},KeyPath=<Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0",State=3,,Disk=1,SharedDllRefCount=0,BinaryType=0)
Error 2908. The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}.
MSI (s) (B0:E0) [12:33:06:629]: MSCOREE not loaded loading copy from system32
MSI (s) (B0:E0) [12:33:06:629]: Assembly Error:Function not defined in specified DLL.
MSI (s) (B0:E0) [12:33:06:629]: Note: 1: 1935 2: {52723CBD-3400-458C-988A-4D012E6CAEDB} 3: 0x8002802F 4: 5: CreateAssemblyNameObject 6: Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"
MSI (s) (B0:E0) [12:33:06:629]: Product: Microsoft SQL Server Setup Support Files (English) -- Error 1935. An error occurred during the installation of assembly 'Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {52723CBD-3400-458C-988A-4D012E6CAEDB}
Error 1935. An error occurred during the installation of assembly 'Microsoft.SqlServer.WizardFrameworkLite,Version="9.0.242.0",processorArchitecture="MSIL",Culture="neutral",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.1399.0"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {52723CBD-3400-458C-988A-4D012E6CAEDB}
MSI (s) (B0:E0) [12:33:06:629]: User policy value 'DisableRollback' is 0
MSI (s) (B0:E0) [12:33:06:629]: Machine policy value 'DisableRollback' is 0
Action ended 12:33:06: InstallFinalize. Return value 3.
mandpenny
I am trying to configure distributed transaction and XA support using Microsoft SQL Server 2005 JDBC Driver. I have coppied SQLJDBC_XA.dll from XA directory and placed in my sql server binn directory and trying to run the script xa_install.sql from binn directory with command as below :
C:Program FilesMicrosoft SQL Server80ToolsBinn>
osql -U sa -n -P admin -S localhost -i C:JavaLibrariesMS SQL Driversqljdbc_1.2enuxa xa_install.sql
But I am getting error saying :
[DBNETLIB]SQL Server does not exist or access denied.
[DBNETLIB]ConnectionOpen (Connect()).
when I replaced local host with the machine name it gives error :
[Shared Memory]SQL Server does not exist or access denied.
[Shared Memory]ConnectionOpen (Connect()).
where in I am able to test connection from Websphere using the same connection.
Please help some one ....... I am in URGENT need.... I need to enable XA suport for my application to run........
Thanks ----
Hi guys,
I have problems installing SQL server 2005, any help ??
Tks...
This is the log file description...
=== Verbose logging started: 25/12/2007 21:05:41 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:Archivos de programaMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (AC:50) [21:05:41:656]: Resetting cached policy values
MSI (c) (AC:50) [21:05:41:656]: Machine policy value 'Debug' is 0
MSI (c) (AC:50) [21:05:41:656]: ******* RunEngine:
******* Product: {53F5C3EE-05ED-4830-994B-50B2F0D50FCE}
******* Action:
******* CommandLine: **********
MSI (c) (AC:50) [21:05:41:656]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (AC:50) [21:05:41:656]: Grabbed execution mutex.
MSI (c) (AC:50) [21:05:41:671]: No se puede conectar al servidor. Error: 0x80040154
MSI (c) (AC:50) [21:05:41:671]: Failed to connect to server.
MSI (c) (AC:50) [21:05:41:671]: MainEngineThread is returning 1601
=== Verbose logging stopped: 25/12/2007 21:05:41 ===
I'm attempting to install the standard version of SQL server 2005 on XP SP2. I'm getting the following:
Errors occurred during the installation:
Error 1603 installing Microsoft SQL Server 2005 setup support files.
Reader Community
I've just started hosting my newly created Microsoft Visual Web Developer 2005 Express Edition web site. Unfortunately the Login group membership functions will not function correctly. Having contacted the web service hosting provider, They replied: "We do not support SQL express2005. The only way to use the extra functions of ASP.NET2 such as group membership is if it is using an SQL 2000 database to connect to. "
Is it possible to design web sites with Microsoft Visual Web Developer 2005 Express Edition that store membership details on an SQL 2000 database?
I've just paid £88 approx. $140 for a years subscription, have I chosen the wrong web service hosting provider?
Should I have designed the web site with a better web site design software tool that also makes designing membership login functionality easy, just as Microsoft Visual Web developer 2005 express edition?
Look forward to all comments?
Regards
Philip
Hi Guys,
Im having trouble stopping a transaction once the result on one or more of my sql statements rolls back the transaction. Take a look at one my first 'IF' statement (below). If the parameter '@Return' is 'False' i want the transaction rolleback and all sql execution to stop. But my problem is the rest of the sql gets executed and i end up getting rubbish data. Im still new to transactions so i think im doing something really wrong. Please take a look at my sql and help me out in what ever way you think is best. thanks in advance.
MattBEGIN TRY
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE
BEGIN TRANSACTION;
BEGIN
DECLARE @Return BIT;
SELECT @Return = (SELECT IsReturnable FROM INVENTORY WHERE InventoryID = 6)
IF (@Return = 'False') ROLLBACK TRANSACTION;
DECLARE @Already_In INT;
SELECT @Already_In = (SELECT ReturnedBy FROM InventoryInUse WHERE (CheckOutNumber = 375))
IF (@Already_In IS NOT NULL) ROLLBACK TRANSACTION;
DECLARE @Outstanding As INT;
SELECT @Outstanding = (SELECT (QtyTaken - 40) AS Outstanding FROM InventoryInUse WHERE (CheckOutNumber = 375));
DECLARE @OutstandingReason As VARCHAR(200);
DECLARE @Get_Person_ID INT;
Select @Get_Person_ID = (SELECT PersonID From [User] WHERE Username = 'matthewsk');
IF (@Outstanding < 0) ROLLBACK TRANSACTION;
ELSE IF (@Outstanding > 0)BEGIN
IF (@OutstandingReason = '') SELECT @RollBack = @RollBack + 1;
UPDATE InventoryInUse SET ReturnedBy = @Get_Person_ID, ReturnDate = GETDATE(), QtyReturned = 40, QtyOutstanding = @Outstanding, WriteOffReason = 'Testing This' WHERE (CheckOutNumber = 375);
UPDATE Inventory SET TotalQty = TotalQty - @Outstanding, QuantityInUse = QuantityInUse - (40 + @Outstanding) WHERE InventoryID = 6;
END;ELSE IF (@Outstanding = 0)
BEGIN
UPDATE InventoryInUse SET ReturnedBy = @Get_Person_ID, ReturnDate = GETDATE(), QtyReturned = 50 WHERE CheckOutNumber = 375;
UPDATE Inventory SET QuantityInUse = QuantityInUse - 50 WHERE InventoryID = 6;
END;
COMMIT TRANSACTION;
END;END TRY
BEGIN CATCH IF (XACT_STATE()) = -1
BEGIN ROLLBACK TRANSACTION;
END;
END CATCH;
Hi Kristen:
Thanks for your help in my date problem. It worked perfectly. I was away and could not answer back promptly.
yesterday, i was inserting data from a data file into a SQL table. 1 record had a name field as varchar. But it accidently, ended with a &.
For example, "New Construction &". when I am inserting, its taking all records except this record that ends with a &. Is there any way to include this one Or should I tell my client that this is an error.
If its an error, what is the expalnation(Like string char does not end with a & and & is a ------).
Thanks others in the forum.
I am sorry. "New Construction &". Its not a column name. Its just a record. The table has a column called Name and it accidently, got a record that has "New Construction &" for the Name column.
Its not inserting that record with "New Construction &" in the Name field. Other records are fine.
I am attempting to learn Service Broker from Bob Beauchemin's book "A Developer's Guide to SQL Server" - Chapter 11. I'm finding it to be very good but I'm confused over the concept of closing a conversation. Could someone answer the following questions for me?
When a conversation is ended, can the conversation handle that was created when the conversation was created still be used? (I assume not)
Beauchemin says, on page 511, that when a conversation ends, "Any messages still in the queue from the other end of the conversation are deleted with no warning." Does this mean that if I send a message that expects a reply, but I end the conversation, the message is still sent, it is still received by the other endpoint, the other endpoint processes it, but I'll never receive the reply?
Beauchemin says that if no lifetime is specified, the conversation is active for the number of seconds which can be represented by the maximum size of an integer. Does this mean that if I don't specify a lifetime, a conversation is active for many, many years?
Thanks very much.
Amos
Alright here's my situation.
I have two servers both running Eval copies of SQL Server 2005 Enterprise. This is only because I had the promise that I would be getting a shiney new server with a fully licensed copy of the server soon so I wasn't worried when I setup these two programs to use these. Now they are dragging their feet to approve the server and software so I'm scared.
First question - What will happen when the eval period runs out?
Second question - Can I tell what the date was when I installed the server?
These both will help me push management to approve atleast the purchase of an SQL license if I can't get the server.
Thanks.
Rob
I'm using SQL SERVER 2000 and in the process of establishing recoveryguide.Tried to rebuild master using rebuildm.exe but the "Configuring Server"never ending. Then I tried to copy original databases from SQLServerInstallation CD to hard disk as the "Browse for folder", but gave thesame problem. Need advice what need to be done.
View 2 Replies View RelatedHi Champs
I want to implement a rutine that watches for specific files in a specified folder.
I've found the WMI sample "File Watcher Task" for SSIS and it looks fine.
My question is now: how shall I run this package; shall I start it at let it run forever?
And also how do I monitor that the package is running?
Many thanks
Rogvi
I have a process that seems to leave many orphaned sessions over a period of time. The software is by a 3rd party vendor and they can't seem to fix it. It is safe to end the orphaned sessions and I do that on a regular basis. My questions is: What is the best way to do this via T-SQL?
I can select the orphaned sessions by using a simple query on the sys.dm_exec_sessions table. How do I then run a kill command for each session_id from that query?
I appreciate any info/advice anyone might have!
How do i automate, by stored procedure, generating the "week ending" date using a field data.
------------------------------------------------------------
CREATE TABLE [dbo].[t_Work_Hours] (
[WorkHoursID_PK] [int] IDENTITY (1, 1) NOT NULL ,
[PeopleID_FK] [int] NOT NULL ,
[JobID_FK] [int] NULL ,
[StartTime] [datetime] NULL ,
[EndTime] [datetime] NULL ,
[Title] [nvarchar] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[WeekEnding] [datetime] NULL ,
CONSTRAINT [PK_t_Work_Hours] PRIMARY KEY CLUSTERED
(
[WorkHoursID_PK]
) ON [PRIMARY] ,
CONSTRAINT [FK_t_Work_Hours_t_Work_People] FOREIGN KEY
(
[PeopleID_FK]
) REFERENCES [dbo].[t_Work_People] (
[PeopleID_PK]
)
) ON [PRIMARY]
GO
-------------------------------------------------------
What i have tried has'nt even been close to a solution.
UPDATE dbo.t_Work_Hours
SET WeekEnding = DATETIME ( ??? , StartTime) . I have no idea where to go!
----------------------------------------------------------------
WorkHoursID_PK, PeopleID_FK, JobID_FK, StartTime, EndTime, Title, WeekEnding
7, 40, 3, 11/1/2005 6:00:00 AM, 11/1/2005 4:30:00 PM, J, (NULL)
8, 43, 3, 10/31/2005 6:00:00 AM, 10/31/2005 4:30:00 PM, F, 11/6/2005 11:59:00 PM
9, 43, 3, 11/1/2005 6:00:00 AM, 11/1/2005 4:30:00 PM, F, 11/6/2005 11:59:00 PM
-----------------------------------------------------------
I would like to know how I could code so that I can get the ending inventory of each day. The following is my data
CREATE TABLE #TEMP
(
DATERCVD DATETIME
,ACCTID INT
,DATESENT DATETIME
)
INSERT INTO #TEMP VALUES ('01/01/2015', 1 , '01/05/2015')
[Code] ....
So my query results should be something like this:
InventoryDate Received Sent Ending
1/1/2015 4 1 3
1/2/2015 5 0 8
1/3/2015 3 2 9
1/4/2015 0 4 5
1/5/2015 0 5 0
TOTAL 12 12
Hi,
How do I round when number is ending with 5 for example:
When the number next to number 5 is an even number
24.5 = 24.0 round down
0.245 = .24 round down
1265 = 1260 round down
when the number next to number 5 is an odd number
23.5 = 24.0 round up
0.235 = .24 round up
1755 = 1760 round up
Thanks in advance!
I've read Remus' article on Fire and Forget tactics when it comes to ending conversations, and I have to admit I am guilty of sending a message to a service and immediately ending the conversation. I've set up a stored procedure to end the conversation on the initiator queue, but I'm guessing it's never being fired because I am not ending the conversation in the target activated stored proc, which is a CLR stored proc.
Can you tell me how to end the conversation from a CLR stored proc?
Now that I think of it none of the code I use in my TSQL activated stored procs to handle different message types and error-checking is done in the CLR stored proc.
Thanks
I have a bunch of records of the following layout:
A B 1235
A B 1236
A B 1237
A C 1238
A C 1239
When I run my script, I want to aggregate these together, but preserve the starting and ending record ids in two new columns:
A B 1235 1237
A C 1238 1239
Can I do all of this in an Aggregate Transformer, or do I need to derive some columns first?
Thanks!
Jim Work
Hi,
I have a job in SQL Server agent with 199 SSIS steps and growing. In the job log only 99 steps are shown, which is a problem if a step higher than 99 fails to run. I need the steps to run in sequence and preferable would like to split the job into several jobs each containing no more than 99 steps. The only thing I don't know is if it is possible to have the next job in sequence start only when the previous job has finished.
Does anyone know if this is possible, and if so how it is done?
Many thanks,
Paul
Hi,
I have a simple web application which calls a stored procedure. The stored procedure operates as a transaction and runs for several minutes. I've created a partial class to set the SQLcommand timeout property to avoid any timeouts, which works fine. Unfortunately though, when the application is run in the production environment, it ends in an error after a certain amount of time (maybe a couple of minutes - not exactly sure), which seems to be the same each run. It doesn't appear to end the stored procedure though, which results in locking the tables. It runs fine in the development environment, and it doesn't appear as though any error information is provided when the application crashes.
I'm assuming that the ASP.NET application is timing out for some reason, but the stored procedure itself is fine. I can run it directly from SQL server without any dramas. In the Virtual Directory configuration within IIS, I have the script timeout period set to 1200 seconds. The Default Web-Site timeout property is set to 120 seconds, but I'm assuming that this is only for internet connection timeout, not database transaction timeouts.
Any information as to what may be causing this is appreciated.
Thanks
Morning Guys,
I have a database where I need to kill a remote connection.
If I was manually logged into the box i would you a netstat command to stop the service.
I would like to end a process from another machine before starting a restore process
Does anyone have any suggestions?
thanks,
Jonathan
Issue
I need to write VS2005 C# code using SQL OLE DB to access SQL Server 2005. I have no choice in that matter. I can create a database user with a password like COMPANY", which is a string of uppercase characters ending in an unmatched double-quote mark.
Using Microsoft SQL Server Server Management Studio I login using Windows Authentication, create an account with the password, COMPANY", check the "Enforce password policy", click "OK", and then exit.
Setup
I launch Microsoft SQL Server Server Management Studio again, select "SQL Server Authentication", type in the account name and the COMPANY" password, click the Connect button, and I'm in.
Problem
Now, I need to connect programmatically and run a stored procedure. The password is stored in clear text in hte Registry€”not my choice, it's a legacy application, and changing that is not an option open to me. (We have probably all seen company safes where the combination is scribbled on the wall in case you forget it!)
Here is the code I use to run the sproc:
DBCONNINFOLib.DBConnectionInfoClass DBConnInfo1 = new DBCONNINFOLib.DBConnectionInfoClass();
String strConnString = DBConnInfo1.GetConnectionString( "" );
OleDbConnection con1 = new OleDbConnection( strConnString );
OleDbCommand cmd1 = con1.CreateCommand();
cmd1.CommandType = CommandType.StoredProcedure;
String sCmdText = "sp_SomeStoredProcedure";
cmd1.CommandText = sCmdText;
If I set the connection string in the registry to COMPANY", I get an error like this:
Server Error in '/' Application.
Response is not available in this context.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Response is not available in this context.
Source Error:
Line 60: catch (System.Exception e)
Line 61: {
Line 62: Response.Write(e.Message.ToString());
Line 63: }
Line 64:
Source File: C:sourceProductNameDataCenterAdm&ReportsWebPagesProductNameWebCommonCodeCommon.cs Line: 62
Stack Trace:
[HttpException (0x80004005): Response is not available in this context.]
System.Web.UI.Page.get_Response() +2077605
SiteIQWeb.CommonCode.Common..ctor() in C:ProductNameDataCenterAdm&ReportsWebPagesProductNameWebCommonCodeCommon.cs:62
SiteIQWeb.MasterPage..ctor() in C:ProductNameDataCenterAdm&ReportsWebPagesProductNameWebMasterPage.master.cs:21
ASP.masterpage_master..ctor() in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 255b545c8a400c7App_Web_hfj8popy.0.cs:0
__ASP.FastObjectFactory_app_web_hfj8popy.Create_ASP_masterpage_master() in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 255b545c8a400c7App_Web_hfj8popy.3.cs:0
System.Web.Compilation.BuildResultCompiledType.CreateInstance() +49
System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection) +250
System.Web.UI.Page.get_Master() +48
System.Web.UI.Page.ApplyMasterPage() +18
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +685
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
The closes to success I have been able to come is to set the password to "COMPANYNAME""" or 'COMPANYNAME"', which results in a System.Data.OleDb.OleDbConection Exception with a HResult of 0x80040e4d, and the message Login failed for user 'username'.
Questions
Can the password be formatted differently in the registry, or somehow processed after retrieving it, so that SQL Server 2005 will accept it?
Is this a bug in .NET Framework or SQL OleDb?
Is this simply a case of "Is it hurts, don't do it"?
Thanks in advance. As with all postings, my job, promotion, product success, company future, or some combination thereof is on the line.
what would be the TSQL in trying to create a new table with date-time format ending via a select into like:
select
*
into tblResults_
+
SELECT
CONVERT(VARCHAR(10),GETDATE(),112)
+
'_'
+
REPLACE(CONVERT(VARCHAR(10),GETDATE(),108),':','_')
from qryResult
I have an very long ntext field, made up of many sentences that I append a full stop to every one, I also strip out any line breaks within the text. However I get this error, when I look it up it comes up with "Failed to locate the ending boundary of a sentence."
View 0 Replies View Related