Hi,
Is there anyway I could do to migrate my data on my excel workbook to SQL Server 2005 per worksheet? Meaning, I have to create table for all my excel worksheet then transfer all the data to a new table through SSIS package.
How will I possibly do this? Please help.
Thanks in advance.
Hi,
I have a server that has sql server 2000 standard edition, and I just got a new server but this time I'm going to use sql2005 Express (free version).
My databases are not 2gigs in size, so I should be fine.
What is the best method for me to convert the databases? Is it to just detach the database and re-attach in sql2.5?
I recall something about Analysis Services (SQL server tool) that is able to extract data from the DB tables (select multiple tables if one wishes (and to link those tables up ??!?)) then extracted to MS Excel. It has been a while since the course was last taught, I'm not at all sure how the steps were, or how Excel were able to display them. Would someone advice or refer to a tutorial if possible?
Much thanks!
Hello,
I know no one helped me in the previous post but I pray this time someone can help me on this regard. I am developing through VB ActiveX Script using DTS SQL Server Enterprise Manager. I have one question, I wanted to get the woorksheet name for an excel file but I do not know how to do that. Can you help in this regard? Thanks in advance.
I am trying to import data from an excel worksheet to sql mgmt studio express..Everyone has told me to right click my database, select tasks, select import but the problem is there is no IMPORT option..What did I do wrong??
View 5 Replies View RelatedI need to export data to a worksheet and format the resultant sheet appropriately. I kow server side automation is a no-no. What would be the best alternative to accomplish this?
View 16 Replies View RelatedCurrently my package contains an Excel Source with a contraint to a SQL Table. The Excel Connection Manager currently has an expression attached to it which allows it to read the variable value and this in turn loads the correct file. This all works fine.
The problem I am having is that if the Worksheet name is different to what was previously set a error is thrown.
Is there anyway in SSIS I can retrieve the name of the excel worksheet and pass it into a variable to be used.
Thanks
Is there a way to specifically name the .xls worksheet name when a report is exported and there are over 5 tabs/worksheets?
...can you use a header value to name the worksheet?
Hi,
I want to rename the worksheet tabs when I export the report to excel. The answer is NO with SQL Server 2005 but any luck with SQL Server 2005 Service Pack 2? Please help.
I am Exporting my report to excel.
1, One thing i want's is to have gridlines available when report is exported to excel. {not by setting borderstyle }
2,I am inserting page break after a table to put different data on different sheet.How can i name the resultant work sheet {like table1 should be DATA,table2 should be MYSummary}
3,Can I insert page break after any control like simple textbox or it is necessary to put in a table ?
hi guys,
How could I export the result from Query? I'd like to run the query and at the same time the result must be saved in Excel Worksheet. is this possible? How?
Thank you very much.
Lets say i have one analysis server project on server A . I have made an excel sheet on desktop B in which i have inserted a pivot table which datasource is Server A's cube . I then have save this worksheet as webpage and save it on Server A. When i run this webpage on server A its working fine with but as soon as when i run this webpage on other PC it give me the error
"The query could not be processed:
The data provider didn't supply any further error information."
what could be the reason .. Please help me i am going mad....
Hi Everyone,
I'm trying to create a DTS package that will let me import an Excel file. The user will be able to name the file the same name every time. But can the DTS package read a different worksheet name each time? Right now, if I use the Excel connection object in DTS designer, it wants to hard code the worksheet name.
Thanks,
Eric
I am Exporting my report to excel.
1, One thing i want's is to have gridlines available {not by borderstyle } when report is exported to excel.
2,I am inserting page break after a table to put different data on different sheet.How can i name the resultant work sheet {like table1 should be DATA,table2 should be MYSummary}
3,Can I insert page break after any control like simple textbox or it is necessary to put in a table ?
I have a report, which when I do Export to excel it comes in excel in multiple worksheets(because I ahve page breaks in my report), Now I want to name each worksheet programatically and not manually, Any idea how we can name the worksheet through reporting services, so that on export to excel I will get the work sheets with my preferred names
View 6 Replies View Related
Hi Guys,
I have a sales report with each item group strating in a new page. When I export this to excel, I get mutiple worksheets (one sheet for each item group). This is fine but only problem is worksheets are not named( in this case name of item group). Has anyone got an idea how to populate worksheet names fro reporting services?
Thanks
Sonny
I've created a stored procedure that accepts two arguments: the name of an Excel workbook (@workbookBillRun), and the name of the first worksheet found in that workbook (@worksheetBillRun).
Through dynamic SQL, I'm able to construct a statement that pulls out data.
SELECT @sqlBillRun = '
SELECT [ACCTNUM], [INVNUM], [RECURRING], [NON RECURRING], [USAGE],[DISCOUNT],[TAXES]
FROM OPENROWSET (''Microsoft.ACE.OLEDB.12.0'', ''Excel 12.0;;Database=' +@workbookBillRun+ ';HDR=YES'',
''SELECT * from [' +@worksheetBillRun+ '$]'')'
The workbook name will always be known: when the user uploads the file, I change the name to match a certain pattern. Example: 2011-08 AUG.xlsx
However, I won't always know the worksheet name. The workbook *should* contain just one worksheet; and the worksheet *should* be named identically to the workbook (2011-08 AUG), but it may not be named as such. And if I pass an invalid worksheet name, the code above will fail.
I've created error handling to alert the user of an incorrectly named sheet. However, I was curious whether I could extract the name of the first worksheet in the workbook from within T-SQL.
Hi :1. I import data into sqlserver, from an excel file, from a worksheetwithin it, named 'input_data'2. then i scrub the data in sqlserver3. then i export some data into the same excelfile but into anotherworksheet named 'output_data'I have got it working and this is how i am doing it right now. I amhaving a problem in the few steps identified below :1. I delete the worksheet 'output_data' using an execsql taskDROP TABLE `output_data'2. Then i have another execsql task to create itCREATE TABLE `output_data`3. Then i have datapump task to put data into worksheet.The work fine, but i am running into a problem, when the output_dataworksheet doesnt exist.So i need to write a query tellingIF `output_data` doesnt exist, then DROP ITHow do i do thisI am open to doing this in ActiveX Script(vbscript) and ExecSQL taskAlso i do not have excel dll or runtime in my dbserver.Please let me knowthanksRS
View 1 Replies View Relatedhi
i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
pls some one can help me ???
thanks
chaus
I have a PowerPivot table setup based of a SQL Server stored procedure. I am kind of surprise that when I click the Refresh button on the PivotTable Tools ribbon bar above the report the report does not refresh. I have to open the PowerPivot window, click refresh and then go back to the worksheet with the PivotTable and click Refresh. Is that by design? It seems like the Refresh on the worksheet just gets the existing data from the table.
View 2 Replies View Related
Can you open/use a database created in SQL2005 in SQL2005 Express?
Thanks for the help!
Max
I just upgraded my SQL 2000 server to SQL2005. I forked out all that money, and now it takes 4~5 seconds for a webpage to load. You can see for yourself. It's pathetic. When I ran SQL2000, i was getting instant results on any webpage. I can't find any tool to optimize the tables or databases. And when I used caused SQL Server to use 100% cpu and 500+MB of ram. I can't have this.Can anyone give me some tips as to why SQL 2005 is so slow?
View 3 Replies View RelatedHi
We have Sql2005 x64 bit standard edition server installed in windows 2003 64 bit editio server,
currently due to buisness requirements we need to have sql2005 x64 bit enterprise edition, please let me know how do i do the upgrade or change.
is it possible to retain all our custom settings in the standard edition after changing to enterprise edition.
This has to be done for our production and very critical, please help
Thanks
Samuel I
I have a situation where I want to load the Excel file dynamically, and the excel file have different columns or even worksheet name. How I could approach this? I believe there's no way to modify the meta data (specifically the mapping) in the data flow.
View 6 Replies View RelatedHi, This is because there are many columns need to display ,when users export to excel ,now they have to manually adjust the worksheet as one page . Therefore,as the title,can anyone help me?
View 3 Replies View Related
I am unable to install 32-bit SQL Server Integration Services on the server due to something that was left behind by the 64-bit version.
I've uninstalled SQL Server 2005 64-bit and when I try to install the 32-bit version of Integration Services, I get this error: "Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087 Error message: Unknown error 0x80131501 Error descrition: FATAL: Could not find component 'Microsoft.SqlServer.Dts.Task.MessageQueueTask.ServCompMQTask' we just installed."
I can't seem to figure out how to resolve this problem with the COM+ and I can't remember if Integration Services is required.
Can anybody please advise?
Hello,
I have a vb program that include a dts package that has been saved to vb with sql2000 dts wizard and works very good.
Now that I upgrade my website to sql2005, this vb dts package doesn't work.
The error I get is:
Microsoft Data Transformation Services (DTS) Package
Invalid STDGMEDIUM structure
(Microsoft Data Transformation Services (DTS) Package (80040066): Invalid STDGMEDIUM structure
) (Microsoft SQL-DMO (ODBC SQLState: 42000) (80004005): [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near ')'.)
I searched in the internet how to make dts package in sql2005 and save it to vb and found no information about it.
What Can I do to get the vb code of the dts package I create in sql2005 or how do i migrage the sql2000 vb dts package code to sql2005?
Thanks,
Kubyustus
I have some production boxes on Win 2000 32-bits OS and some production servers have been upgraded to Win2003 64-bit OS runing SQL Server 2005. There are also a number of Win2003 32-bit OS running SQL 2005.
The issue is that when linking the 64-bit production servers to the 32-bit boxes running SQL 2005 / Win 2003 OS, the linking seems to succeed, but I am unable to see a number of entries in sys.objects. Typically, these objects are User Stored Procedures.
Moreover, the linking seemed to have worked, but data extraction does not take place between the servers. However, there are no errors. The objects (user stored procs) exist on the 64-bit side, but linking does not actually happen.
Microsoft KB has addressed this in SQL 2000 case in this KB article, but has not suggested a solution for SQL 2005.
Any ideas? Has anyone else encountered this?
Thanks.
Hi everyone,
Can I do an insert with one column value being specified and the others being retrieved? Basically, I have to take an input from the user, join that input with the result of a select (based on that input) and post that to a table
I don’t suppose we can do something like
INSERT destTable(col1, col2, col3….)
Values (col1_value, (Select (…..)))
What do y'all think? Any input/suggestion is appreciated! :)
Thanks,
Gijoo
Hi i have data on a Server in a different database which i like to access from within my ssis job.
I just need to look up information from one table on this database so i can references it. Is there a way of doing this is SSIS. Rather then me having to load the data from one database to another as the data may change.
i tried having 2 sources of data feed into a look up but that does not work..
Hi there,
On my home page I have several different folders to reports which require different data sources. the problem is that within these folders there are multiple copies of the same datasource. is it possible to store all of the datasources in one folder, one location? it would certainly be easier when changes to usernames and passwords need to be modified!
Thanks,
Rhonda
I have around 120 tables. I am using script component to pull the values from oracle stored procedures. I do not want to create 120 source & desitinations in my dataflow. Please advice how can this be possible with one script component and one oledb destination.
I noticed I can add mutiple outputs in 1 script component which makes the script component to work like a dataset (container of different recordsets (tables) ), if I am correct. Can this be redirected to an dynamic oledb connection.
I searched and read about Data Sources and I'm seeing that there is no advantage in using it, which is what I found from playing around with it.
I expected that you would set a global connection in Data Sources and somehow link this to the things in your Connection Manager, giving you one place to switch from one environment to another. But reading the discussions here and playing around with it, this is not the case.
So, why is it there?
Next question.... another thing I gathered so far is something called "Configurations" that will do what I was describing above. Where do I do this?