I was given a project from my supervisor and i must complete it until Tuesday. I must transfer our ingres database into sql server database. So far i have done all the work with the tables, primary keys, views and data. I don€™t know how to go on with the procedures and rules that i have to transfer. Is there anyone that had faced the same condition? What should i do?
Maria
Hi
I am a Oracle DBA who is going to embark upon a
oppurtunity to migrate Oracle to sqlserver.
Can somebody give me tips for
Learning sqlserver2k5 for a Oracle DBA Books
Or Beginner DBA/Development Books for sql2k5
How good is the migration assistant from m$$ for
migrating from oracle to sql2k5
Does it migrate data as well as procedural code ?
Do you anything for me to watch out for best parctices
migration guides
You opinion would be higly appreciated
regards
db2hrishy
I made a website with sqlserver membership
when i migrate the website to another server i can not connect to the database aspnetdb
how i can add a user to this data base in the visual web developer
Thnakis
I migrated a DB from Access 2000 to SQLserver 2000.The tables are OK, but I see the old Access views... as TABLE inSQLserver!!Any suggestions?--
View 3 Replies View Relatedcan we restore (migrate) database from MS SQLserver 2005 to MS SQLserver 2000
Pls reply.
Hello everybody.
Recently my boss decide migrate reports in Oracle Discoverer to SqlServer 2005 using Reporting Services..because SqlServer is less expensive than Oracle. ..
Well I don't know exactly How do I began? because it's new for me.
Any has experienced? Can you give any recomendations to migration?
Thanks.
Dear all,
I want to connect to an Ingres Database in Sql Server 2000 using OPENDATASOUCE
But I don't know the syntax about OPENDATASOURCE when connect to an Ingres Database?
Thanks you
Hi All,
I have a problem with a DTS package to import data from one of our Ingres based Databases.
I've recently moved the DTS package from one server to another and recreated the Ingres ODBC Settings, which are all OK.
When I run the package through EM and the CMD line, it runs OK, but not as a scheduled task.
I've had a look at a KB Article Q318819 and followed the steps about package threads on 3rd party drivers, but this doesent help, nor does making sure DTSRun isnt in the current task list.
Could anyone help me out please?
TIA.
Hi all,
I am having a problem with exporting the data. I have a database in SQL Server which has to be exported in to an ingres database. I was sure that there is no direct option to export the data to ingres, So I tried generating the insert script and cvs files. But the database consists of blobs and images which is not allowing me to create the complete insert script or cvs files.
Does any one know how to resolve this issue?
Thanks in advance,
Vamshi Shekhar C
need a clue about how to migrate the data from an Oracle applications 11.03 and underlying Oracle 8.05 database to navision 4.0 running sql server 2000
tia
We have a static class that makes an HTTPWebRequest to get XML data from one of our vendors. We use this as input to a stored proc in SQLServer2005. When I compile this class and call it from a console application in visual studio it executes in milliseconds, everytime. When I compile it, create the assembly and clr function and execute it in SQLServer, it takes around 14 seconds to execute the first time, then on subsequent requests it is again really fast, until I wait for 10 seconds and re-execute, once again it is slow the first time and then fast on subsequent requests. We do not see this behavior when executing outside SQLServer. Makes me think that some sort of authentication is perhaps taking place the first time the function is run in SQLServer? I have no idea how to debug this further. Anyone seen this before or have any ideas?
Here is the class:
Code Snippet
using System;
using System.Collections.Generic;
using System.Text;
using System.Net;
using System.IO;
namespace Predict.Services
{
public static class Foo
{
public static string GetIntradayQuote(string symbol)
{
string returnQuote = "";
HttpWebRequest request = (HttpWebRequest)(WebRequest.Create("http://data.predict.com/predictws/detailed_quote.html?syms=" + symbol + "&fields=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,28,30"));
request.Timeout = 1000;
HttpWebResponse response = (HttpWebResponse)(request.GetResponse());
StreamReader streamReader = new StreamReader(response.GetResponseStream());
returnQuote = streamReader.ReadToEnd();
streamReader.Close();
response.Close();
return returnQuote;
}
}
}
When I run call it from a console app it is fine.
I compile it into a dll and then create the assembly and function as follows:
Code Snippet
drop function fnTestGetIntradayQuoteXML_SJS
go
drop assembly TestGetIntradayQuoteXML_SJS
go
create ASSEMBLY TestGetIntradayQuoteXML_SJS from 'c:DataBackupsCLRLibrariesTestGetIntradayQuote_SJS.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE FUNCTION fnTestGetIntradayQuoteXML_SJS(@SymbolList nvarchar(max)) RETURNS nvarchar(max) AS EXTERNAL NAME TestGetIntradayQuoteXML_SJS.[Predict.Services.Foo].GetIntraDayQuote
go
declare @testing nvarchar(max)
set @testing = dbo.fnTestGetIntradayQuoteXML_SJS('goog')
print @testing
When I execute the function as above, again, really slow the first time, then fast on subsequent calls. Could there be something wrong with the code, or some headers that need to be set differently to operate from the CLR in SQLServer?
Regards,
Skipper.
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Ś€„˘')
with 2 Unicode characters
Ś€ = 0x2300
„˘ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„˘"
„˘ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„˘')
and select again voila i see
"Ś€„˘"
Does anyone have an idea?
Thanks
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
Thanks!!
I'm chasing after a documetn that was available on one of the Microsoftwebsites that was titled somethign like "MS SQL Server Best Practices"and detailed a nyumber of best practices about securing the server.Included in this was revoking public access to the system tableobjects.Can someone post the URL where I can pick this up, or drop me a note oncontacting them for a copy of the document?
View 2 Replies View RelatedI have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
Hello,
I have an SQLServer Mobile database, and I would like to know if there is a way to upgrade it to SQLServer 2005 (.mdf) database. My database has no records in it, just the structure (tables etc). What I am actually asking is if I can create automatically a new SQLServer 2005 Database with the same structure as my existin SQLSErver Mobile database
Thanks in advance,
TassosTS
Hello people.
I am in the process of planning a server upgrade to sql2005 x64.
I created 2 linked servers: one to a SQL2000 sp4 server and one to a SQL7.0 SP3.
I have the following error when I query the linked servers.
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "Unspecified error".
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "The stored procedure required to complete this operation could not be found on the server. Please contact your system administrator.".
Msg 7311, Level 16, State 2, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "IVDM2K". The provider supports the interface, but returns a failure code when it is used.
I am aware of KB 906954.
http://support.microsoft.com/default.aspx?scid=kb;en-us;906954
I applied the instcat.sql on the SQL2000SP4 server and my linked server issues for that one are gone.
However, I ran the instcat.sql script on the SQL7.0 sp3 server and the linked server is still giving me an issue.
Can someone help me find a solution to this?
Regarding KB935356, is there a "post" service pack 2 update for SQLServer Express?
Thanks.
Hello Expert!
I have 2 Database €“ Access & SQLServer(ver 7)
I need to Import Data TblShift from Access to SQLServer €“ using DTS I€™ve done this successfully!
Now I want to use parameter so I only importing record within range (e.g. ShiftDate BETWEEN 05-24-2006 AND 06-23-2006)
In SQLServer, I have created table to store the date range as following:
TblParameter
DateFrom: 04/24/2006
DateTo: 05/23/2006
How do I use the date range from TblParameter(SQLServer) to import record from TblShift(Access) using DTS?
Is this possible or any better solution for this?
TIA
Regards,
Hi Friends,
Can some please let me know the differences between sqlserver 2000 and sqlserver 7.0
Hi,
I am new to SQL Server 2005. I tried connecting to my local machine by using my machine name as Server name and then tried running the following query:
SELECT * FROM SYS.Objects. It gives me following error:
Invalid object name 'sys.objects'.
Whereas, if I connect to my local machine using mahcinenameSQLEXPRESS, then the above mentioned query runs fine.
Why is this difference? What is the difference when I login in these 2 different ways.
Any help would be appreciated.
Thanks in advance.
Any help
I have DNN installed on one server and now i need to move whole site to another server. I have moved the FTP files, and changed the conn string in config. How can i move the database? I dont have the database publishing webservice installed so i will need some other way. Does anyone know of a simple way to migrate from one sql server to another?
View 1 Replies View Relatedi have an application that runs on sql server, that is all working fine on the development environment, and nearly ready for deployment in production.
a large part of this application is based on complex dts packages.
is there a straightforward way to migrate all of these packages AND change all the connections to point to the live box rather than the development box, without painstakingly changing all the connection objects (in around 100 packages!!)?
Hi,
I'll be doing a migration of all my exisitng SQL7 databases to SQL2000. We are planning to buy new servers for the upgrade. What is the best way to move the entire database?
A) Use copy DB wizard?
B) Create own DTS package to move everything?
C) Script the entire DB and run it on the new server and then move the data?
D) Do a backup and restore it onto the new server?
What are the best options? Are there anything that i should be aware of?
Eric
Hi
I need to move some DTS packages from SQL7 to SQL2K
What is the best way to do this?
I realise the problem is because a SQL7 master database cannot be restored to a SQL2K master database
Is there some way these can be scripted out of 7 and the script run in 2K
thanks
liju
The vendor originally set the db up with user logins. I am migrating the db and need to know how to migrate all the logins as well.
View 2 Replies View RelatedDear All,
I am exploring the feasibility of migrating from DB2 (v7) to MSSQL server 2005. My current applications are using UDB, but the DBA wants to change to MSSQL. I believe the impact is huge. For example, how to create schema in MSSQL, how to migrate the data...
Anyone had the experience before? Could kindly suggest some reference for such a migration? Thanks!
Regards,
Does anyone have any documentation for the following?
How to migrate DTS to SSIS
How to Run DTS as DTS in SQL2K5
Any help is much appreciated.
I'm migrating from DB2 to SQL 2005 workstation. I have tried all kinds and type of migration tools. The best way so far is using the import wizard to created an SSIS package. One little problem so far. I cannot get past the "Text was truncated or one or more characters had no match in the target code page" error. I get quite a few rows before it stops. I've looked for any "invalid characters" in the source data. The row it seems to stop on doesn't make sense. Is there a way to modify the SISS package file to not stop on truncation errors? Or, can I determine the proper code page to use? I've adjusted column data types and lengths but can't find a combination that works.
- Copying to [tsi].[TSI].[CNOTES1] (Error)
Messages
Error 0xc020901c: Data Flow Task: There was an error with output column "CNLINE" (20) on output "OLE DB Source Output" (11). The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
Error 0xc020902a: Data Flow Task: The "output column "CNLINE" (20)" failed because truncation occurred, and the truncation row disposition on "output column "CNLINE" (20)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - CNOTES1" (1) returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Hy all, my english is not so good so i try to explain...
I have this environment
2 Servers, one is sql 2000 an the other is sql 2005 (cluster)
My server 2000 is very old and we dont want to upgrade(hardaware) them and it have a lot of DTS´s packages (actually only DTS packages). I need to rewrite every package to SSIS, but my priority is take off this server transfering de DTS packages to SQL2005 and use in legacy mode.
How do i do this ?..In this moment i just want to transfer the packages to 2005 and use in legacy mode..there´s a diference between migrate and use in legacy mode ?
Thank´s
Hi,
I was able to create an MSSQL database with the ASPNETDB.MDF file. But how do I get the Login Control to point to the MSSQL rather than the App_DataASPNETDB.MDF file?
Hello all,
I have an application in which the database is currently in MySQL. The app is being re-written(in .net 3.5) and I would like to move the data to SQL Server 2005. What is the best may to get the data from MySQL to SQL Server. Any good tools out there? Idealy, I would be able to manipulate the data during the move, as I have plans for some schema changes, but I suppose I could always make them after migrating.
Please suggest any tools or methods, with your thoughts. I will evaluate any suggested tools. Also, SSIS is available for me, is that the best way?
Since I'm not a native English, sorry for my poor English.
I want to migrate the current Sybase database to MSSQL 7.0, can anyone tell me the procedure to accomplish. Thank you.
Regards,
Kung Wu