Migrating DTS To SSIS
Jan 31, 2008
I am tasked with migrating a few DTS packages to SSIS from 32bit 2000 box to 32 bit 2k5 box. These DTS packages contain simple processing of AS cubes. When I run the wizard to migrate the package on my sql 2k5 box, I get the following error during processing:
Could not load file or assembly "Microsoft.SqlServer.Exec80PackageTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
and the wizard shows the status being "Stopped". I found the Microsoft.SqlServer.Exec80PackageTask.dll on a 64 bit server located in C:Program Files (x86)Microsoft SQL Server90DTSTasks and copied it to the 32 bit 2k5 box. This still did not work and the error log produces
...........
LogID=4
#Time=9:53 AM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message= at Microsoft.SqlServer.Dts.MigrationWizard.TasksMigrationModules.CustomTaskMigrationModule.Migrate(Task task, Package& yukonPackage)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.MigrateTasks(DTS8Package shilohPackage, Package& yukonPackage)
...........
LogID=6
#Time=9:53 AM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message=Microsoft.SqlServer.Dts.MigrationWizard.HelperUtility.DTSMWException: Could not load file or assembly 'Microsoft.SqlServer.Exec80PackageTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. ---> System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.SqlServer.Exec80PackageTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.SqlServer.Exec80PackageTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
at Microsoft.SqlServer.Dts.MigrationWizard.TasksMigrationModules.CustomTaskMigrationModule.Migrate(Task task, Package& yukonPackage)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.MigrateTasks(DTS8Package shilohPackage, Package& yukonPackage)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
I also tried re-installing the backward compatability components to no avail. Any ideas?
View 13 Replies
ADVERTISEMENT
Feb 7, 2008
I have lots of DTS packages and jobs in SQL 2K, we are planning to migrate to SQL 2005. Will my DTS and jobs still work? If not, what are the procedures for migration. thanks
View 3 Replies
View Related
Aug 17, 2007
Hi ,
Getting error even remove Text (Source) task in DTS.
Pl. help me .
Thanks,
Raja
Error:
LogID=23
#Time=11:32 AM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file "C:PONE_SSIS_PACKAGESPONE_SSIS_SELLTHRUPONE_DTS_SELLTHRU_TEST.dtsx" with error 0x80004005 "Unspecified error".
---> System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file "C:PONE_SSIS_PACKAGESPONE_SSIS_SELLTHRUPONE_DTS_SELLTHRU_TEST.dtsx" with error 0x80004005 "Unspecified error".
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)
View 9 Replies
View Related
May 29, 2008
Hi all - just wondering if anyone could give me an idea of how arduous this task would be (migrating Cognos Data Manager scripts to SSIS). I realize it wont be a trivial endeavour, but wondered how much of a headstart having the initial validated Cognos catalog would be to this project (or would it be pretty much useless?)
Thanks
View 4 Replies
View Related
Oct 3, 2007
I have created a SSIS package to load data into a destination table.
Now I cheked that package into main server. Then I tried to change path for both source and destination connection managers. I'm not sure whether I can do that.
But now what I want is load data into a data base which is in another server (Perforce).
Can I do this? Or Am I doing smthing wrong?
If so, Which is the correct way?
View 5 Replies
View Related
Nov 29, 2007
I have migrated DTS to SSIS through migration utility. The origional DTS has lots and lots of VbScript.
SSIS has converted it into 8 to 10 Activex script task. When I run the package it gives error in the first activex task.
I found on net the SSIS does not understand Vbcript and this needs to convert into .Net.
Please guide.
View 1 Replies
View Related
May 27, 2008
Hi all,
I need to migrate some documents(in GB's) from FTP Server1 with meta data information in SQLdbA to FTP Server2 with meta data information in SQLdbB. How can we achieve this?
Am new to this concept and got information that we can use FTP task. But unable to proceed how to achieve this. Please help me.
View 2 Replies
View Related
Mar 11, 2008
Hello,
Is it possbile to migrate SS2000 DTS packages to SS2005 SSIS involving databases with compatibility mode set to 80. If yes, what are the potential issues, which may occur?
Sajish
View 6 Replies
View Related
Oct 10, 2007
Hi All,
Can anyone suggest me a way to migrate data from paradox tables to sql server tables using SSIS.
Paradox tables are having millions of rows.
Any help on this is greatly appreciated.
Thanks,
SVGP
View 8 Replies
View Related
Aug 1, 2006
Hi All,
In SQL Server 2000 DTS, I had an Active X script that, using ADO, performed the following basic operation:
Retrieve a list of account numbers through Recordset1
While Not Recordset1.eof
Build a sql statement based on fields from current row of Recordset1
Open Recordset2 based on the sql statement built
Run an update query based on results from recordset 2
Loop
I want to bring this over to SSIS, but i'd like to take advantage of the most current "ways of doing things" instead of just using SSIS's activex script.
Does anyone have any recommendations on the best way to handle this type of thing in SSIS? A script task? A script component? I've never really worked w/ ADO.net so if it involves that I'd have to pick up some pointers... any suggestions?
Thanks in advance
Jeff
View 1 Replies
View Related
Apr 6, 2006
Hi,
I have created a simple SSIS package in a 32-bit server and I'm able to execute it using dtexec command in the same server.I copied this package to the 64-bit machine and when try to execute the pacakge using dtexec /f <package path> ,it is giving me the following error
"The connection manager "10.101.24.230.master 1" will not acquire
a connection because the package OfflineMode property is TRUE. When the Offline
Mode is TRUE, connections cannot be acquired."
But in SSIS designer OfflineMode property for the package is by default set only to false but still I get this error in 64-bit.
Any help in this regard would be appreciated.
Thanks
SG
View 1 Replies
View Related
Jan 3, 2008
Hi,
In my script 'm using
Set oPkg = DTSGlobalVariables.Parent
Set oBeginStep = oPkg.Steps("DTSStep_DTSExecuteSQLTask_1")
I guess becoz of using DTSGlobalVariables.Parent in activex,the script is not working.
Can anyone please suggest a solution to run it in SSIS.
Thanks in Advance
View 3 Replies
View Related
Apr 10, 2006
I have migrated several (7) DTS packages to SSIS in a development environment. In this environment these packages all work as designed. I am now in the process of placing the .dtsx files on the production server and scheduling jobs around them.
I am encountering problems in 3 of these 7 packages. I get the following error:
Message
The job failed. The Job was invoked by User <domainuser>. The last step to run was step 1 (Create and Transfer Credentialling Data).
This is not what I would call very informative. I have opened the dtsx files in question in BIDS on the production server and each has the following error reported:
Error loading <name>dtsx; Failed to decrypt protected XML node "PassWord" with error 0x8009000B" Key not valid for use in specified state." You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
I have looked at the package setting "Protection Level" and all seven packages have the same setting: EncryptSensisitveWithUserKey
Each of the connections within the packages have been defined to utilize Windows Authentictation. And the jobs are set to run under the SQL Agent Account.
What I find most puzzeling is that each of these packages are defined exactly the same and some work correctly and others do not.
Thanks for taking the time help me with this issue.
View 5 Replies
View Related
Mar 3, 2006
Hi,
We need to migrate data from Sqlserver2000 database to Sqlserver2005. The SQLserver2000 DB was poorly Normalized and the DB was redesigned inSqlserver 2005. Both the databases are operational.Currently we have around 90 tables that need to migrate the data from the OLD DB to NEW DB, all the table mappings between the old schema and new schema have been successfully established.
Each Table is treated on its own merit and applying its own business rules which allows the data to be transformed to the new tables.The client wants us to build a SSIS solution that needs to performs the following
a. Import all Look Tables.
b. Import all master Tables ( One time import of some tables data and other tables may need to import every 4 hrs)
c. Import all Transaction tables( One time import and other tables may need to import every 4 hrs of data)
My Question is how to apporoach this scenario of pulling one time lookup, master and transaction tables and scheduling 4 hrs data importing process, how to build a SSIS solution for this type of scenario.
Thanks
Jayadev
View 4 Replies
View Related
May 13, 2008
I have successfully used migrate wizard to migrate DTS pacakge to TrainingDTS.dtsx.
What should I do next? when I run
C:>dtexec /file "C:TrainingDTS.dtsx"
Error: 2008-05-13 09:14:31.36
Code: 0xC0029172
Source: File Transfer Protocol Task undefined FTP Task
Description: The connection is empty. Verify that a valid FTP connection is p
rovided.
End Error
Error: 2008-05-13 09:14:31.36
Code: 0xC0024107
Source: File Transfer Protocol Task undefined
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
View 2 Replies
View Related
Apr 4, 2006
Hi,
I have to create a migration package ..means package should migrate the sql server 2000 tables to 2005 tables (Not dealing with data at this point of time and ignoring SPs,DTS packages).But there are lot of normalisation ans schema changes in 2005 compared to 2000.Like,
- One 2000 table devided into 3-4 tables in 2005
- Lot of changes in the filed names
- Handling integrity relationship between the newversion tables
Being new to SSIS ,iam in confusion like how to start and where to start.can you pls tell me the steps(Structured way) i have to fallow
-- I have around 8-9 tables in 2000 ,I have to migrate them into 18-19 tables (with some new fileds )
-- For each table i have to create one package(bcoz lot of transformations are there) or I can create one package for all of those ? but the finally i have to handover one package to the client
pls ask me if u need any further info to come up with the explanation..bcoz iam not sure whether i provided enough info or not
Thanks for ur help
Niru
View 2 Replies
View Related
Feb 13, 2008
Below is a migration plan that I've compiled to migrate SQL 2000 DTS packages to SSIS 2005. Once these DTS packages have been migrated i will need to create a job and schedule them in SQL 2005.
I would appreciate and feedback or questions on this migration plan.
Migration DTS 2000 packages to SSIS 2005:
1. Will need to save the current production DTS package as structure storage file. We do not have a UDL file. We set the data connections within each DTS package.
2. Go to Sql 2005 - ManagementLegacyData Transformation Services - right-click and open previous saved structure storage file.
3. Modify the DTS data creditentials to reflect the SQL 2005 connection data. Modify any SQL 2000 MAPI settings to utilize SQL 2005 new database mail. Save the package on SQL 2005.
4. After the modified DTS package has been updated and saved on SQL 2005, save this file as a structure storage file.
5. go to BIDS. Create a new SSIS project. Right-click on SSIS packages and select Migrate DTS 2000 package. This will migrate over the DTS 2000 package with the updated SQL 2005 data creditentails.
6. click on the package properties - protectionlevel and change it to dontsavesensitive.
7. right-click and select package configurations..., select to store data creditentials in xml format.
8. right-click on execute DTS 2000 package task, select Edit... and click on Load DTS2000 package internally. This will embed this task into the new SSIS package. Test the package. Continue if successful.
9. Use SSIS deployment functionality to move the package over to SQL 2005 Integration Services. Right-click on package and select Run Package, if successful, create a job and schedule it to run on SQL 2005 Agent.
10. When creating the Job under SQL Agent, change the Owner: of the job to reflect the owner of the new SSIS package. Schedule the job.
I've just coming up to speed on SSIS 2005. Therefore, this is what i've been able to piece together up to this point and I'm looking for some industry advice/feedback on whether or not this is a good migration plan. I need to provide a migration plan to management by 2/18. Thanks
View 1 Replies
View Related
Oct 29, 2007
Hi - Im migrating packages in dts 2000 to SSIS 2005 using package migrator wizard. It loads a CSV to a table in DB. I need to change the server and file location paths after migration. While changing this, im encountering error - "the acquireconnection method call to connectionmanager failed
View 1 Replies
View Related
Apr 28, 2008
I applied the following info and created an SSIS package that allows COM control of Excel:
unable to add reference to Microsoft Excel in VSA
The package runs locally, and can be executed successfully after it is migrated to the server, but both of these processes use local memory space (I think). When I try to run the package via a job, it fails with the following error:
-------------------------------------------------------------------------------------------
Date 4/28/2008 10:34:04 AM
Log Job History (J_MSR_UHC_PC)
Step ID 1
Server SFA30229SQL003
Job Name J_MSR_UHC_PC
Step Name S_MSR_UHC_PC
Duration 00:00:05
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: ALEREsql_admin. ...on 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:34:04 AM Error: 2008-04-28 10:34:06.73 Code: 0xC001405F Source: Description: Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information. End Error Progress: 2008-04-28 10:34:09.34 Source: Data Flow Task Validating: 0% complete End Progress Error: 2008-04-28 10:34:09.45 Code: 0xC0202009 Source: msr_uhc_pc Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2008-04-28 10:34:09.45 Code: 0xC020801C Source: Data Flow Task... The package execution fa... The step failed.
----------------------------------------------------------------------------------------------
Microsoft.Office.Interop.Excel.dll has been added to the assembly directory.
Any ideas would be appreciated.
TruckeeBill
View 4 Replies
View Related
Mar 3, 2008
I'm migrating DTS containing a Loop that performs tasks again:
in the last task:
stpBegin = Pkg.Steps("DTSStep_DTSActiveScriptTask_1");
stpBegin.ExecutionStatus = DTSStepExecStat_Waiting;
My needs are:
1: exec SQL Task 1
2: Script task 1 (write log/insert into table)
3: exec SQL Task 2
4: script task 1 again
5: exec SQL Task 3
6: script task 1 again
etc... etc...
I've one only task for write loginsert into table. Can I switch it to "waiting" status and do it next step?
How can I do this?
View 3 Replies
View Related
Apr 25, 2007
In using SSIS to migrate data from mainframe to SQL 2005, I had a situation where only group level data was exposed through the ODBC to SSIS, so I pulled this information as varchar on the SQL destination side. Now I would like to break that group into the individual numeric columns I need on SQL Server. However, the positive and negative sign did not convert because it came of character. I can write something to convert the positive signs to positive numbers; however I cannot do the negative because I would need get rid of the leading zeros in order to place the negative sign before the number. Is there anything I could have done to get SSIS to do the conversion like it did for every one-to-one mapping?
View 9 Replies
View Related
Jan 24, 2001
Help!!!!!!
I cannot get the SQL Server Upgrade Wizard to work!!
I have one machine with NT 4 (SP4) and SQL 6.5 and another machine with NT 4 (SP4) and SQL 7.0 (new install, never had SQL 6.5 one it). I want to upgrade a database to 7.0.
Each machine can 'see' the other via shares and even trying to register a SQL database in each other machines Enterprize manager (although that fails because they are different versions of SQL)
Using the Upgrade Wizard, on the third screen, where you specify the Server Name for the export server, it even has the other server's name in the dropdown list {I never even put it in}. And yet, after I set the export server name and put in the database SA account password and then put in the SA account password for the local server (the one that is running the Upgrade Wizard).
After I select next, I get a message that states...
'Unable to connect to Export Server. Please verify that you are an NT administrator on that machine.'
These are standalone servers. Not BDC's. I am logged into each machine as the administrator.
I have tried adjusting the SQL services to allow logging as the System Account and the administrator account and a whole bunch of options....
but I can't get it to work.
HELP!!! This shouldn't be this hard.... should it???
View 2 Replies
View Related
May 24, 2000
Does creating the tables first before copying the data from 6.5 to 7.0 is the best way to migrate from SQL 6.5 to 7.0?
Thanks in Advance!
View 1 Replies
View Related
Apr 21, 2000
I run SQL 6.5 on an NT 4.0 platform in a client/server environment with Windows 95 as the clients. I use VB 6.0 as my user interface with Access 97 utilizing DAO (yes, still DAO) for the ODBC connection to the SQL server. When I install SQL 7.0 and move my data to it, can I refresh my links in Access 97 from ODBC to OLE DB and automatically take advantage of the new connection, or do I have to rewrite my queries to take use OLE DB rather than DAO? Thanks for any suggestions and help.
View 2 Replies
View Related
Aug 27, 2004
Hello People,
I currently have a MS Access database that will eventually be migrated to MS SQL Server. There won't be an application now, just the database and the reports. My doubts are on how easy this transition will be.
1 - After I build all the database with tables and relationships, is there a tool that helps me to import data?
2 - Is there a way to insert the data on the database other than writing the SQL codes, I mean maybe creating some 'forms'?
3 - Once the data is in, it there a way for me to create report on the SQL Server itself or do I need a report generator like Cristal Reports for example;
4 - If yes, then how easy it is to integrate them;
5 - Is it complicated to generate these reports or it is pretty much the same interface as in Access or Delphi?
Thanks a lot
Atha
View 1 Replies
View Related
Mar 28, 2007
I have an ms sql 2000 db which I am migrating from one shared environment to another. How specifcally can I do this?
I have a copy of enterprise but not a full version of SQL on my local desktop.
The hosting company from which I am moving has placed the db as a zip file on the root of my site via ftp. I have unzipped it and it appears as a backup copy (.bak).
I appreciate any detail steps, I assume via enterprise, that anyone can give me. Thank you.
View 1 Replies
View Related
Jul 12, 2007
I am very new to SQL so please bear with me. I have an SQL 2000 server running on Windows 2000 server in an NT4.0 Domain. We are planning to migrate (not upgrade!) everything to a new WIndows 2003 AD environment using ADMT. I wanted to know if there are any issues with the migration of an SQL server if we are to move forward with this strategy. I have heard that an SQL database keeps domain related information within its database and wanted to know if this is true.
Thank you
View 5 Replies
View Related
Jun 11, 2008
Hi,
I need to migrate db,Im planning to use attach & detach option.Is there any cons in migrating the databases(32 bit,not clustered ,sql 2005) to databases(64 bit,clustered,sql 2005).What are the things do i need to take care of?what are the things do i need to do after the migration?
Thank
View 8 Replies
View Related
Mar 8, 2008
I've developed a website and it's hosted by a hosting company. Lately i've registered a new domain with a new virtual hosting account. I've transfered my web files succesfully. But migrating the sql server failed for a couple of times now. My database containes many tables with many products. My hosting provides doesn't give me the opportuniy to restore my backup which i've backuped from my old server. First I tried to use the import and export tool of sql server 2005. This was very easy and it succeeded. But this tool only migrates the tables and the views. All the common stored procedures of asp.net membership are not exported. So I can't login at the moment. I've tried to generate a sql script with all the stored procedures with sql server management studio. But If i want to run this script on my new db, it fails with various errors. I tried to use the aspnet_regsql tool to create all the membership tables and stored procedures. If this succeeds, I can import and export my old db to the new one. But i'm getting a error while trying to use the aspnet_regsql tool. The error number is 290 and the error is: How can I fix this? Er is een fout opgetreden bij het uitvoeren van het SQL-bestand InstallMembership.sql. Het SQL-foutnummer is 290 en het SqlException-bericht is: Invalid EXECUTE statement using object "Relation", method "SetUseVarDecimal".----------------------------------------Details van fout----------------------------------------SQL Server: Database: [samet]Geladen SQL-bestand:InstallMembership.sqlOpdrachten mislukt:/*************************************************************//*************************************************************//*************************************************************/DECLARE @ver intDECLARE @version nchar(100)DECLARE @dot intDECLARE @hyphen intDECLARE @SqlToExec nchar(400)SELECT @ver = 8SELECT @version = @@VersionSELECT @hyphen = CHARINDEX(N' - ', @version)IF (NOT(@hyphen IS NULL) AND @hyphen > 0)BEGIN SELECT @hyphen = @hyphen + 3 SELECT @dot = CHARINDEX(N'.', @version, @hyphen) IF (NOT(@dot IS NULL) AND @dot > @hyphen) BEGIN SELECT @version = SUBSTRING(@version, @hyphen, @dot - @hyphen) SELECT @ver = CONVERT(int, @version) ENDEND/*************************************************************/IF (@ver >= 8) EXEC sp_tableoption N'aspnet_Membership', 'text in row', 3000/*************************************************************//*************************************************************/IF (EXISTS (SELECT name FROM sysobjects WHERE (name = N'aspnet_Membership_CreateUser') AND (type = 'P')))DROP PROCEDURE dbo.aspnet_Membership_CreateUserSQL-uitzondering:System.Data.SqlClient.SqlException: Invalid EXECUTE statement using object "Relation", method "SetUseVarDecimal". bij System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) bij System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) bij System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) bij System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) bij System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) bij System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) bij System.Data.SqlClient.SqlCommand.ExecuteNonQuery() bij System.Web.Management.SqlServices.ExecuteFile(String file, String server, String database, String dbFileName, SqlConnection connection, Boolean sessionState, Boolean isInstall, SessionStateType sessionStatetype)
View 2 Replies
View Related
Apr 6, 2001
We are looking to migrate an entire server with several databases which collectively contain every user in the company. Obviously, I would prefer to directly migrate the logins without having to make everyone reset their own passwords. Anyone know of a way to do this?
I tried dts'ing the syslogins table but it fails due to password collumn being read only.
View 5 Replies
View Related
Jun 27, 2001
Hello!
We are planning migrating to different server.
I know the answers how to migrate all jobs and DTS packages.
But the only question I have is "How to migrate logins and passwords?"
What is the best way to transfer logins?
Can't you just export syslogins table into text file and then import it into the new server?
Thank you
Lena
View 12 Replies
View Related
Dec 19, 2000
Has anybody been successful migrating userids from one server to another server using SQL7.0? If so, is anyone willing to please provide any sample scripts.
View 1 Replies
View Related
Apr 22, 2000
HI all,
Could any one pls suggest me, how i have to migrate to sql server 7.0 from db2. Pls also recommend some sites where will i get the information regarding this migration.
Thank you all.
---Chowdary
View 3 Replies
View Related
