Hi all,
We are planning to move the SQL Server 2000 Database server from 32 bit to 64 bit. Is their anything which can bother the migration or it will be a smooth transition.
When I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
Hi,
I'm migrating SQl Server Reporting Services from 2000 to 2005.The reports are generated normally in 2000 but it seems that it is taking more time in 2005 or sometimes it does not generate the report at all.Could you kindly suggest a solution?
Thanks,
anne
Hello,
I have to do an impact analysis for migrating a .Net web based application. The current and desired scenarios are mentioned below.
The current environment:
OS - Windows 2000, SP4
Framework - .Net 1.1
SQL Server - MSSQL Server 2000
Desired Environment:
OS - Windows 2003, SP1 / Windows 2003 R2
Framework - .Net 1.1
SQL Server - MSSQL Server 2005
Please let me know
1. If any changes need to be done in the application when migrating the database from 2000 to 2005?
2. Any relevant document which will help me in the same.
Regards, Venkat
I have successfully moved my data from a SQL Server 2000 hosting site to a SQL Server 2005 hosting site. I Made a backup of my database using Enterprise Manager (2000) and imported the database tables using SQL Server Management Studio (2005). I do not know how to move the 25 or so stored procedures that I have in SQL Server 2000. I have a very short amount of time to figure this out and am hoping that someone can give me a brief step by step answer on how to get this done. I would appreciate any information you can provide. Thank you!!
View 5 Replies View RelatedHI,
i have tried the below three steps but i dont get script to any output file or clipboard after the executing the script generation. And i would also like to why i get lo of errors when i run the scritp from the step one,i got the script and i try to run it on sql server 2000,there is lot of errors. I there any order i need to follow when i run the script in sql server 2000.
Plz help me out. This is urgent.....
How to Downgrade a Database from SQL Server 2005 to SQL Server 2000
As you may all know, SQL Server 2005 request a minimum of 8GB RAM to work€¦ let say satisfactorily. I first didn€™t knew that and after a while from the upgrade I did from SQL Server 2000 to 2005 my SQL Services were starting to crash three or four times per DAY!!!
At first I thought I was being attacked, but soon I realized it was nothing like that. I then decided to downgrade to an SQL Server 2000 edition. Though I looked around the internet to find some information on how to do that, I got very disappointed when I realized that no actual documentation of any kind could be found for that. So I am posting this thread to inform you on the procedures I had to follow for this action.
Before beginning I must assume, firstly that the user, who will attempt such thing, has a basic knowledge of SQL Environment, secondly that he has the two versions already installed (both 2000 and 2005), that a basic backup of the databases has been created and finally that all the 2005 SQL Server Users have been created at the SQL Server 2000 environment as well.
Step 1 Generating Scripts for the Database Elements and Structures
1) Right-click over the desired Database at 2005, Choose Tasks and the Generate Scripts (Option).
2) At the pop-up Dialog Box click at the Script All Objects in the selected Databases check box, to activate it and then Click the Next Button.
3) Set the following Elements to the following Values
a. Script Collation , set to TRUE
b. Script Database Create, set to TRUE
c. Script of SQL Version, set to SQL SERVER 2000
d. Script foreign keys, set to FALSE
e. Script Triggers, set to FALSE
Then Hit the Next button
4) Select the way the generated scripts should be saved (There are different selections. The most common one is Clipboard). Finally click the Next button till you reach the end.
5) Click Finish
After completing this procedure, we have to move to the SQL SERVER 2000 environment. Here, by using the Query Analyzer, we will have to run the scripts that were generated using the master database. Copy and Paste the script at the Query Analyzer and run it. After that the Structure of the Database will be created.
Be careful, the SQL Server 2005 Edition inserts the Views in a random place through the script. Therefore, all the scripts that are referred to the Views MUST be moved to the end of the script. If the Query Analyzer shows some errors do not be bothered. Delete all the elements created from the script and after you fix the code run it again.
Step2 Moving the data from 2005 to 2000
1) After completing the previous step successfully, moving the data follows. Right-click at the 2005 database you used to run the previous step and select Tasks and then choose the Export Data (option).
2) From the pop-up Dialog Box, select the Source Db and Click at the Next Button.
3) At the next step you will have to choose the destination server and the destination Database for the Data to be exported. Then Click Next.
4) A List of all the Source Database€™s Elements will appear in the screen. Select one by one all the Elements you wish to move and for each one click at the button Edit Mappings (Located at the bottom right corner of the Dialog Box just under the Elements list). A new Dialog box will pop-up. Select the Delete rows in Destination Tables option and activate the Enable Identity Insert Option. (Remember to repeat this action for each of the selected Element from the list that will be moved.
CAUTION!!! A malfunction of the SQL Server 2005 has been found. Not sure why, after multiple tries I have observed that when I tried to move more than twelve Elements at once, the Export Data Wizard of SQL Server 2005 seemed to disable the Enable Identity Insert Option that was activated over the Edit Mappings Dialog Box. But if the number of the selected Elements is smaller than 12 no problem seemed to appear.
Step 3 Generating Scripts for the Database Foreign Keys and Triggers
Finally, to successfully finish the downgrade of the Database, the Triggers and the Foreign Keys of the DB must be produced. The procedure that should be followed is the one stated next:
1) Right-Click at the SQL 2005 Database and Select from Tasks Menu the Generate Scripts Option.
2) Using the pop-up Dialog Box make sure that the check box Script All Objects in the selected Databases is not enabled and hit the Next Button.
3) Set all the Elements on the List to a False Value except the ones that follow:
a. Include IF NOT EXISTS , set to TRUE
b. Script Owner, set to TRUE
c. Script of SQL Version, set to SQL SERVER 2000
d. Script foreign keys, set to TRUE
e. Script Triggers, set to TRUE
Then Hit the Next button
4) After finishing reading the Elements of the Database, a new list will appear at the Dialog Box. Make sure that you select ONLY THE TABLES of the Database and hit the Next Button.
5) At the screen that follows hit the Select All button and the Next.
6) Select the way the generated scripts should be saved (There are different selections. The most common one is Clipboard). Finally click the Next button till you reach the end.
7) Click Finish Button.
After completing this procedure, we have to move to the SQL SERVER 2000 environment. Here, by using the Query Analyzer, we will have to run the scripts that were generated using the master database. Copy and Paste the script at the Query Analyzer and run it. After that the Foreign Keys and the Triggers of the Database will be created.
After these steps the database should be fully functional under the SQL Server 2000 edition.
Hi All,
We are planning to migrate from SQL Server 2000 to SQL Server 2005.
I am trying to connect to the SQL Server 2000 using SQL Upgrade Advisor. But I am getting the following error whenever I click on the detect button after entering the server name:
Upgrade Advisor could not detect SQL Server component on the server.
The Network Path was not found.(mscorlib)
Please let me know if any of you have faced the same issue.
Thanks,
Suhas
I have to 2 database server, one is running in SQL Server 2005 and the other one is SQL Server 2000. Now, I want to transfer my database from SQL Server 2005 to SQL SERVER 2000 and gives error. Any solution?
Thanks
Ronie
Any suggestions on migrating Access97 tables to sql server 2000? The DTS seems cumbersome and the Access97 upsizing wizard add-in is only compatible up to sql server 7.0.
Thanks
Hi all
I try to migrate sybase to SQL Server 2000, but found a los of trouble, please, some can help me to resolve this???
May many of that are easy to resolv, but is mi fist time with SQL Server 2000... plz, help :(
Object : Procedure
Error : Sintaxis incorrecta cerca de la palabra clave 'cursor'.
Code :
Create Procedure ABA_CenResul
as
Begin
declare @EST_CEN_Codigo char(8),
@EST_CEN_Descripcio char(100),
@n char(100),
@name char(100),
@salida char(8),
@vble int,
@ini int,
@ter int,
@indice int,
@aux_descripcion char(100)
declare sonido cursor
for
select EST_CEN_Codigo, EST_CEN_Descripcio
from EST_CenResul
open sonido
fetch sonido into @EST_CEN_Codigo,@EST_CEN_Descripcio
select @EST_CEN_Descripcio = @EST_CEN_Descripcio + " "
select @aux_descripcion = @EST_CEN_Descripcio
while @@sqlstatus !=2
begin
select @indice = 1
while @indice <> 4
begin
select @vble = patindex("% %",@EST_CEN_Descripcio)
select @ter = @vble - 1
select @name = substring(@EST_CEN_Descripcio,1,@ter)
if @indice = 1
select @n = @name
else
select @n = @n + "/" + @name
select @ini = @vble + 1
select @EST_CEN_Descripcio = substring(@EST_CEN_Descripcio,@ini,100)
select @indice = @indice + 1
end
print @n
exec sdxsrvr...soundex @n, @salida out
update EST_CenResul
set EST_CEN_Soundex = @salida
where EST_CEN_Codigo = @EST_CEN_Codigo
fetch sonido into @EST_CEN_Codigo, @EST_CEN_Descripcio
-- select @EST_CEN_Descripcio = @EST_CEN_Descripcio + " "
-- select @aux_descripcion = @EST_CEN_Descripcio
end
close sonido
deallocate cursor sonido
end
Thnx in advance
Hi
I am trying to migrate my database in Oracle 8i to Sql Server 2000 but am unsure of how to carry out the migration. How do I do it and what do I have to consider. My OS is Windows 2003. Thanks in advance
I'm changing servers and want to copy all the logins from the old server to the new server. Is there anyway to do this?
View 5 Replies View RelatedHas anyone had experience of migrating from 2000 to 2005 on the same box , and maintaining the SERVERNAMEINSTANCE_NAME.
What are some effective ways of migrating and retaining the same servername/instance name ?
The issue revolves around minimising the use of extra boxes , as I would like to do the migration on the same server and keep the name the same .
Jack Vamvas
--------------------
Search IT jobs from multiple sources- http://www.ITjobfeed.com
Hi,
I need to migrate my access database to SQL2000 Server. I have three tables in my access database. In each table have 3000-6000 records.
So how to put all these records in to sql2000 server tables.
The table structure in Access database and sql2000 database are same.
Here core work is just insert all these 3000 - 6000 records (rows) from Access database to sql2000 database
Thanks in Advance!!
With regards
Shaji
Hi,
We are migrating from SQL Server 2000 to 2005. We currently use ADO.Net to make connection to sql server. I just want to know after migration to sql server 2005 do we have to make any changes in code in the way we make connection to use ADO.Net2 which is part of sql server 2005. ??
Thanks
Arvind
Hi,I have developed an application using VB 6 (SP 5), MS Access 2000 andCrystal Reports 9. I migrated from from access to SQl Server 2000.This wasn't a problem as i could import all the tables to SQL Server.Also, i could make VB6 talk to SQl Server.The problem arsies when i run my application. The sql syntax foraccess seems to be different than that for SQL Server. A simpleexample being: In access boolean datatype is true/false ,whereas inSQL Server the boolean equivalent is bit (numerical 1 or 0). Thesekind of issues are causing problems and most queries don't run.Would i need to go and change all the queries in accordance with SQlServer syntax ,which would be very time consuming or is there anyfunction which will convert the access datatype into its equivalentSQl Server datatype??Any input/thoughts/suggestions would be appreciated.ThanksJatin
View 1 Replies View Relatedwhenever i modified the connection of my current database...I'll always got an error,when asking for "server name"..it says [DBNETLIB...etc]Named Pipes etc error..my current database was SQLEXPRESS and i want to change it as an SQL OLEDB,2000,2005.. but as i said il always got an error..sometimes it says "SQL server does not exit..ODBC" etc...when im entering the "server name"..so i could only used Access or SQLEXPRESS server database.. what should i do with the error?? thanks for helping again..
View 6 Replies View RelatedJust a quick question, does anyone know any major issues with Migrating Sybase Databases to SQL Server? Just wondering if their any oddities I should be aware of? Thanks nixies
View 2 Replies View RelatedFirst off, sorry if my cross posting offends anyone. I'm posting thisin Access and SQL Server groups - not sure which one is appropriate.I have a relatively simple ASP.NET/VB.NET application that is nowhitting an Access 2000 database over an intranet. We have to migratethe database to SQL Server 7. My experience with ASP.NET is prettylimited and my experience with SQL Server is nonexistent.We have an MSDN subscription, so I went to the downloads section to getSQL Server 7. Guess what? SQL Server 6.5 is available, as is 2000 and2005, but no SQL Server 7. So my first question is, does anyone know ifit is available for MSDN subscribers?The next question is, does anyone know of a good resource that explainshow to make the transition from Access 2000 to SQL Server 7? I know thedata has to be migrated and the connection between the application andthe database modified, but am really not sure exactly what to first andthe correct way to go about it. The application is a simple productconfigurator. There's not a lot of data and it's not a very complexdatabase.Thanks in advance. If you'd like, please copy responses tolcifers(AT)yahoo.com (AT) = @TIA.Cheers.- Luther
View 2 Replies View RelatedI'm in the process of migrating a lot of data (millions of rows, 4GB+of data) from an older SQL Server 7.0 database to a new SQL Server2000 machine.Time is not of the essence; my main concern during the migration isthat when I copy in the new data, the new database isn't paralyzed bythe amount of bulk copying being one. For this reason, I'm splittingthe data into one-month chunks (the data's all timestamped and goesback about 3 years), exporting as CSV, compressing the files, and thenimporting them on the target server. The reason I'm using CSV isbecause we may want to also copy this data to other non-SQL Serversystems later, and CSV is pretty universal. I'm also copying in thisformat because the target server is remotely hosted and is notaccessible by any method except FTP and Remote Desktop -- nodatabase-to-database copying allowed for security reasons.My questions:1) Given all of this, what would be the least intrusive way to copyover all this data? The target server has to remain running and berelatively uninterrupted. One of the issues that goes hand-in-handwith this is indexes: should I copy over all the data first and thencreate indexes, or allow SQL Server to rebuild indexes as I go?2) Another option is to make a SQL Server backup of the database fromthe old server, upload it, mount it, and then copy over the data. I'mworried that this would slow operations down to a crawl, though, whichis why I'm taking the piecemeal approach.Comments, suggestions, raw fish?
View 2 Replies View RelatedHi there
I am new to SQL Server, but the current project that I am working on has the following requirement:-
1) Migrate the application (a servlet based web application on Apache Tomcat) from Solaris to Wintel
2) Migrate the supporting database from SQL Server 2000 to Sql Server 2005
3) Get IIS to communicate with Tomcat for serving servlet/jsp etc to the client
Though I successfully completed item 1 above, am stuck at item 2. Details are below
Actions taken for item 2
A. Installed MS 2005
B. Created new database in MS 2005 (logged in as user 'sa')
C. Generated SQL scripts (such as create table table_A etc) from existing MS 2000
D. Genearted SQL scripts (such as insert into table_A etc) from existing MS 2000
E. Created new schema in MS 2005
F. Ran scripts C & D in the new schema. All tables are records populated.
G. Obtained new JDBC driver and test run to see if connection is working fine, and it worked. Even ran an sql statment
Code Block[select count(*) from sa.table_A]
and got appropriate response.
H. When I made the application to talk to this new database (which is a copy of Production from step C, D above), it's behaving as though it cannot find the record.
I. When I further debugged, I realised that the web application is excuting queries without mentioning the schema. For eg.
Code Block[Select firstName, lastName from table_A]
Or rather it assumes that the user connecting to database is same as the schema name.
J. To further ascertain my point, I ran the query
Code Block[Select firstName, lastName from sa.table_A]
and it worked!
Now the real problem is that I cannot modify the existing code to append a schema name and this approach is rather not recommended best practise.
I tried to match the user name with the schema name, even made this schema as default to the user. But still not finding any luck.
I request all you experts out there to help me out with this problem.
Regards,
prad.nair
I need help migrating sql server reporting services from one server to another.
I have reporting services database on Server A (sql 2005) and the reporting server is server B.
Now I need to move the reporting services database to new server say New_A(sql 2005) and reporting server to new server say New_B.
How can i move the reporting services so that i dont have to re-deploy the existing reports.
Is there any article which explains the step by step process to do it.
Thanks
Hello,I'm not very familiar to SQL Server, but I've to upgrade a DBMS fromV6.5 to V2005.
Quote:
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi, I am looking for a way to transfer data from sql server to sql server ce. I am using sql server management studio express wich has no export/import wizard. How can I accomplish this task? are there any tools available? thanks
View 6 Replies View RelatedWhen I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected
problems when running both 2000 and 2005 SQL Server at the same database server?
3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
TIA,
Jeffrey
Hi,
I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error.
Here is the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is the Environment:
App Server:
Windows Server 2003 Standard Edition
Inside Company's Firewall/ Network
Database Server:
Windows Server 2000 Advanced Edition
SQL Server 2000 SP4
Remote Connections to the Server is checked
Enable Protocols: Named Pipes & TCP/IP
TCP/IP Port: 1402 (I don't know why it isn't the default of 1433)
The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition.
I can ping the db server from the app server using the IP address.
I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server).
I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP?
What do I tell the network admin to change?
Any help would be appreciated.
Thanks,
Oran
Hi Guys,
I have had SQL Server Express and Sql Server Management Studio Express installed on my machine for some time and recently tried to install a trial of SQL Server 2005 as well. (Yes, I'm migrating from Visual Studio Express to Visual Studio Professional, just as in tended!)
Everything went fine except that nothing seemed to be installed. I searched in all the obvious places - both on the Start/Programs menu and on the hard-drive: nothing.
A check under Add/Remove Programs showed that Sql Server 2005 Express was installed, but called SQL Server 2005.
So after a number of retries in which the install program kept saying that there was nothing to install, I selected every option under Advanced in the intall process. This resulted in stuff being installed and I now have SQL Server 2005 running on my machine, but no SQL Server Manager icon.
My questions are:
Where can I find the SQL Server Manager executeable?
Has anyone installed SQL Server Express, SQL Server Mangement Studio Express, SQL Server 2005 and SQL Server Management Studio on a single machine successfully? If so, what order did you install them in? (I'm planning on uninstalling everything SXQL Server related and starting again.)
Thanks very much for your help.
Regards
Gary
Hi,Is it possible to install on a Windows server 2003,SQL SERVER 2000 in the folowing configuration :SQL server 7.0 as a default InstanceandSQL server 2000 as a named instance.Thanks for your answer.
View 1 Replies View RelatedHi
I have created a linked server from SQL Server 2005 (SP 1) to SQL Service 2000 (SP 4) with a sql server login that is available on both servers but with different passwords and permissions.
I am getting the following error while accessing the linked server in management studio based on the scenario given below ;
------ Error Message Starts
OLE DB provider "SQLNCLI" for linked server "(SQL Server 2000 instance name)" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'abc'.
------ Error Message Ends
Consider login name is abc.
Now this login abc has sysadmin rights on sql server 2005.
The same login abc has only db_datareader rights on sql server 2000 on just one database and is not associated with any fixed server role.
I have configured the linked server using the following options;
1. I have tried impersonating login from SQL Server 2005 to SQL Server 2000 .
2. I have also tried specifying remote login / password option.
Anyone having any idea, would be of great help.
Regards,
Salman Shehbaz.
Can I connect from a SQL Server 2005 database to a SQL Server 2000 database, without establishing a linked server connection.
I need to fire a SELECT query on a SQL Server 2000 database, but don't want to add it as a linked server. Is there any way I can do this or its not possible??