Migrating From 2005 To 2005 Mobile
May 4, 2006
Hello All,
I have a database created on SQL Server 2005 and now I would like to migrate the table structure to a SQL Server 2005 Mobile database. Generating the scripts and running them against the mobile database generates a lot of error that I suppose are caused by not supported features or keywords on the mobile engine.
I would like to know what are the best procedure for doing such migration. Note that this has nothing to do with replicating, since the SQL Server 2005 database will be "discontinued" after the migration.
Thanks in Advance,
Igor Kondrasovas
View 4 Replies
ADVERTISEMENT
Feb 22, 2007
I have a developer who built an application using the SSE 2005 December CTP and I would like to bring the db's into the official SSE 2005 released version. I have attempted the following:
1. Create the db's in the released version, detach and re-attach the CTP db's. I got an error telling me they were incompatible.
2. Installed CTP version on one server, backed up the db's and then attempted to restore the db's on another server running the official released version of SSE 2005. Got an error attempting that too.
3. Installed the Management Studio for SS 2005 Developer edition thinking that I could connect to the two seperate instances of each server and like I could in EM 2000 run the transfer wizard to move the db's and data from one server to the next. Problem with this is that I can't get an object browser connection established. I have TCP/IP all config'd correctly, too.
Any other ideas where I can go with this at this time?
Thanks in advance.
Bill
View 3 Replies
View Related
Aug 8, 2006
Dear ppl,
I am writing an application for a device (MDA Pro T-Mobile) having Windows Mobile 5.0 using
-MS .NET Compact Framework 2.0 SP-1
-SQL Mobile 2005.
-VS 2005 .NET
The application uses Merge Replication. The error occurs in the Synchronise() Method of the SqlCeReplication object.
"SQL Server Mobile encountered problems when opening the database."
repl.AddSubscription(AddOption.CreateDatabase);
repl.Synchronize();
I don't understand why I am having this error. It does create the database on AddSubscription() method but it is failing opening the database on Synchronise(). I have also tried uninstalling and then reinstalling all the SQL Mobile components in the following order.
-sqlce30.wce5.armv4i.cab
-sqlce30.repl.wce5.armv4i.cab
-sqlce30.dev.ENU.wce5.armv4i.cab
However, when i run this application on a device(Dell X50 AXIM) with Pocket PC 2003, it runs fine creating the database and sysnchronising it.
The target platform for the project is Windows Mobile 5.0 Pocket PC SDK.
Does any one have any clue what could be the problem ?
Regards
Nabeel
View 6 Replies
View Related
Jun 15, 2006
I am migrating a pocket PC application from VS 2003 to VS 2005 and a few weeks ago I hit the following problem when replicating
A SQL Mobile DLL could not be loaded. Reinstall SQL Mobile. [ DLL Name=sqlceca30.dll]
Scanning forums for help I saw that other people had had this problem and one
http://www.eggheadcafe.com/aspnet_answers/NETFrameworkCompactFramework/Feb2006/post25814466.asp
suggested that this problem could be circumvented by getting the replication object early and then continuously using the same object for subsequent replications.
I did this and it works a lot better now but ever so often I get another error which is
Native Error 28559 SQL Mobile encountered problems when opening the database
My only option at this point is to stop and start the application which cures the problem.
View 4 Replies
View Related
Mar 23, 2006
Hello,
I am developping a non-managed C++ application for PocketPC using a SQL Server mobile database.
The application is compiled for PocketPC 2003 and uses SQL Server Mobile v2. I use Visual Studio 2005. But I need to compile the application for Windows Mobile 5.0 devices. So I installed the WM5 SDK and had the WM5 into my project configuration.
The "ssceoledb.h" which I include incluses the "transact.h" file. But my problem is that this file is only provided with the PocketPC 2003 SDK and not in the WM5 SDK.
So I cannot use the WM5 configuration project with SQL Server. I also tried with the last SQL Server Mobile 2005 (ie v3.0) and the "ssceoledb30.h" also includes "transact.h".
Did I miss something to install ?
Do you know how I can resolve the problem ?
By advance, thank you for any answer.
--
Gregoire
View 9 Replies
View Related
Jan 24, 2007
Hi,
Is there any way to measure bandwith usage during merge replication between sql server 2005 and sql server mobile 2005 running on a cradled wm5 mobile device.
Attaching the windows performance monitor to the network connection established over usb would work although I was wondering if there was something specific for this case integrated into Sql server 2005 / sql server mobile 2005 / Sql server management studio / third party tools that i could use ?
thnx,
pdns.
View 4 Replies
View Related
Jul 26, 2007
Hi,
I have a central database server that is runnning on SQL 2005 standard edition and Windows server 2003 standard as OS.
I realise that I can use SQL statements to encrypt and decrypt the data inside the standard SQL.
However, how do I read and write the data via an web application coded in C#.net and is also running on the same machine?
Another issue is, I need to replicate some of the data in this SQL standard over to a SQL mobile running on a mobile device running on Windows CE 5.0.
The mobile device also needs to read and write data to the encrypted data via a C#.net application.
Question is, with all these requirements to be met, can I use AES? I know that AES is not available on Windows XP and Windows Server 2000 and I cant find AES in the .net compact framework.
how do i go about ensuring security? how do I ensure that the symmetric key is the same both on the SQL standard and SQL mobile?
thank you.
View 7 Replies
View Related
Sep 12, 2007
I have a windows forms application that runs on my PC that populates a SQL Server Compact 2005 database and then transfers that .sdf file to my mobile device. The communication between the mobile device and PC is done using the Desktop RAPI class from OpenNetCF (http://www.opennetcf.com/FreeSoftware/DesktopCommunication/tabid/90/Default.aspx)
Anyway, I was previously using SQL Server Mobile 2005 and my populated .sdf was around 1.7 MB and I could transfer it to my mobile device in a minute. Once I switched to SQL Server Compact 2005, the transfer process began taking 3 minutes with a 1.5 MB .sdf file. The SSCE also got bloated more easily so I added in the Compact operation each time after I fully populate the SDF to keep the file size at 1.5 MB, but even then it still takes 3 minutes.
I've done a few tests where I simply switch between the two database versions and that simple switch of the version changes the transfer time. I am dumbfounded trying to figure out what the cause might be. Since it is just a file transfer, why would the version even matter unless somehow SSCE is really not compacting and lying about its actual size.
Has anyone run into anything similar to this or may have any ideas what might be going on?
Thanks.
View 3 Replies
View Related
Jan 9, 2007
hi,
I have some SQL CE database .sdf file on my handheld, and I was trying to connect to that file via SQL Server 2005 Management Studio, and it does not work. I am wondering if there is any good tool that I can use on desktop to connect to sqlce .sdf database file on my handheld?
Thanks.
View 1 Replies
View Related
Apr 10, 2008
I have written following code in my application
I just want to display all the data of a Single table into a Data Grid, I know that we can drag and drop the table on to a form and datagrid is generated, but here I want to retrive those values through my code, how should i do that
I am getting following errors while running the program
Error 1) Error No. 28037, MS SQL Server 2005 Evrywhere Edition
Error: A request to send data to the computer running IIS has failed. For more information see HRESULT
Error 2) Error No. 0, SQL Server 2005 Evrywhere Edition ADO.Net Data Provider
Error: The specified table does not exist [ JobLists ].
Can anybody please tell me, where I went wrong ??? In this code anywhere else????
Note: While adding a Data Source of SQL Server 2005 Mobile Edition, I have added that .sdf file into my project, thats why I have written the Data Source as : .DbFile.sdf
@"Data Source = .DbDotNetCF.sdf";
The code is as follows:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlServerCe;
namespace DeviceApplication1
{
public partial class Form1 : Form
{
string filename = @".DbDotNetCF.sdf";
private DataSet dsJobLists;
public Form1()
{
InitializeComponent();
}
private void DeleteDB()
{
if (System.IO.File.Exists(filename))
{
System.IO.File.Delete(filename);
}
}
private void Sync()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl = @"http://localhost/WebsiteDotNetCF/sqlcesa30.dll";
repl.Publisher = @"RAHU";
repl.PublisherDatabase = @"DotNetCF";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"PubDotNetCF";
repl.Subscriber = @"SubDotNetCF";
repl.SubscriberConnectionString = @"Data Source='" + filename + "';Max Database Size=128;Default Lock Escalation =100;";
try
{
if (!System.IO.File.Exists(filename))
{
repl.AddSubscription(AddOption.CreateDatabase);
}
repl.Synchronize();
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
repl.Dispose();
}
// Display Same Data In Another DataGrid : dataGrid1
SqlCeConnection cn = new SqlCeConnection(@"Data Source='" + filename + "'");
SqlCeDataAdapter daJobLists = new SqlCeDataAdapter("SELECT JobListsID, JobID, PersonID FROM JobLists", cn);
if (dsJobLists == null)
{
dsJobLists = new DataSet();
}
try
{
dsJobLists.Clear();
daJobLists.Fill(dsJobLists, "JobLists");
dataGrid1.DataSource = dsJobLists.Tables["JobLists"];
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
}
private void DisplaySQLCEErrors(SqlCeException ex)
{
for (int i = 0; i < ex.Errors.Count; i++)
{
MessageBox.Show("Index #" + i.ToString() + ""
+ ex.Errors.Source + ""
+ "Error: " + ex.Errors.Message,
"Error No. " + ex.Errors.NativeError.ToString());
}
}
private void Form1_Load(object sender, EventArgs e)
{
Sync();
DeleteDB();
if (DbDotNetCFDataSetUtil.DesignerUtil.IsRunTime())
{
// TODO: Delete this line of code to remove the default AutoFill for 'dbDotNetCFDataSet.JobLists'.
this.jobListsTableAdapter.Fill(this.dbDotNetCFDataSet.JobLists);
}
}
}
}
I have created a merge replication correctlly( I suppose, there were no errros)
Please help
Your help will be appriciated
View 1 Replies
View Related
Aug 10, 2007
Hello Everyone,
I'm trying to connect to Desktop SQL Server 2000 from Windows mobile PC Emulator (VS 2005). I need a direct connection using connection string to SQL Server 2000 through local wireless network without IIS.
Bellow is the code that I use. After executing this code I get an error on line Conn.Open(). Error says SQL Server does not exist or access denied.
SQL is un and running, and I can log in using SA username from the desktop. Even if I chance IP for another SQL server in my connection string I still get the same error. There is no firewall of any kind running.
Dim connectionSTR As String = "Persist Security Info=False;Integrated Security=False;Server=192.168.0.202,1433;initial catalog=MyDB;user id=sa;password=;"
Dim Conn As SqlConnection
Conn = New SqlConnection(connectionSTR)
Conn.Open()
If Conn.State = ConnectionState.Open Then
MessageBox.Show("Open")
End If
About my environment: SQL Server 2000 is running on Desktop PC with Windows XP SP2. Application which I need to connect to SQL Server is in Visual Studio 2005. I execute the application in Windows Mobile PC Emulator and try to connect to SQL Server from emulator.
Your advice and help is very appreciated
Thank you
Ika
View 3 Replies
View Related
Feb 26, 2008
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005.
When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors.
ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error.
"Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect.
Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems.
I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me
All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial.
I am trying to run this sync on my home pc so there should be no issues with any user permissions
I have IIS installed
I did NOT have SQL Server Agent running in management studio at this time
I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider
I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem.
AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters
int returnValue = this.Adapter.Fill(dataTable);
I am not sure why the errors changed on me after starting SQL Server Agent.
What can I do to fix this connection problem?
Thank you so much for your help!
Irina
View 3 Replies
View Related
May 24, 2007
Hello,
Could someone give me the difference between "Sql Mobile 2005" and "Sql Compact 2005".
At first I thought they were the same, that this was just something of the change in naming the server has had the last months.
My first guess was that Mobile would be the new one, but I have 'accidently' downloaded the Compact and what seems the System.data.SqlServerCE.dll is newer.
So is there a difference?
If yes, what are they.
If not, is the "compact" then the latest version and the name to be used (since on the site only "mobile" is mentioned).
Best regards,
Ike Casteleyn
View 6 Replies
View Related
Jan 10, 2006
I am having trouble with getting Merge Replication up with a new SQL 2005 x64 Server. I already have it running smoothly with SQL 2005 Mobile and SQL 2000, but I want to migrate the backend to SQL 2005.
There is a front end server running IIS 6.0 on Windows 2003 x86 Standard (Server A) with SSL required and Basic Authentication set as the only authentication method (default Domain and Realm are also set). The backend server is running SQL 2005 x64 Standard on Windows 2003 x64 Standard (Server B). The mobile devices are running Windows Mobile 5.0 with SQL 2005 Mobile (Client).
From both a standard Windows XP workstation (IE) and the Client (PIE) I can browse to the HTTPS site on port 444 for the sqlcesa30.dll on Server A and get a response in normal and ?diag modes. The ?diag gives success in all but the 8.0 Database Reconciler (I didn't install the SQL 2000 replication components on Server A, my understanding is they should not be needed). Sql Server Module Versions are as follows: sqloledb.dll - 2000.86.1830.0, 9.0 replrec.dll - 2005.90.1399.0, 9.0 replprov.dll - 2005.90.1399.0, 9.0 msgprox.dll - 2005.90.1399.0.
The publication on Server B is enabled for Web Synchronization and the Snapshop Agent has run. There are no reported errors on that side.
Since I ran into issues getting synchronization to run I have opened up permissions fairly wide in this test environment. The PAL and the Database both have the user I am attempting to sync with listed (I am using the Administrator account in the test domain). I have opened full rights on the Snapshot share on Server B to Everyone (both NTFS ACL on the directory and the Share permissions). The virtual directory on Server A containing the sqlcesa30.dll has also been opened very wide, and the Application Pool does have access to it.
The Client is running a custom C#.NET 2005 application. With the exception of changes to set the application to sync with the Server A/B duo instead of the production servers, this application is identical to the code currently being used in production with SQL 2000 Standard.
The persistent error that I am getting from the Client being thrown by SQL 2005 Mobile when I attempt to sync is "An instance of the SQL Server Reconciler error object cannot be created. Try reinstalling the replication components."
SQL 2005 Mobile components on Server A are set to Logging Level 3 but not returning any errors that I can see to troubleshoot with. All replication components appear to be installed and operational, although I have re-installed them.
Besides the obvious question of how to solve the error listed above, is there an issue with am x85 front end IIS 6.0 server talking to an x64 back end SQL 2005 server for merge replication over HTTPS with Windows Mobile 5.0 clients running SQL 2005 Mobile?
Based on everything I have read off the MSDN Forums, MSDN articles, BOL, log files, and web searches it seems like I should have an operational synching topology, however clearly I have missed something because I have yet to get a successful subscription through to the publication.
Any insight/enlightenment would be greatly appreciated, this seems to be a very narrow and specific area of replication and mobility and information is relatively sparse from my experience so far.
Thanks!
View 5 Replies
View Related
Feb 3, 2007
Hi,
I want to move my sql express DB to a sql 2005 server located at a service provider. I can detach or back, but I am limited on attaching or restoring the DB because the servers are on two limted/seperated networks.
Is scripting an idea? I have SQL manager 2005 running.
regards,
Gerry
View 1 Replies
View Related
Jun 9, 2008
Hey y'all, I'm looking to migrate several databases on SQL 7 and SQL 2000 to a new SQL 2005 box. Has anyone done such a migration? What would you recommend as a good methodology for it? Also, should I expect stored procedures, triggers, indexes, other complementary stuff to break? I'd love to hear about your migration experiences.
View 1 Replies
View Related
Feb 5, 2007
We are planning on upgrading a SQL 7 Server to 2005 SP1. I ran the Update Advisor and one of the issues listed was that the Database Maintenance Plan would not work in Server 2005. The Advisor mentions a tool to use but not which one, which is my first question.
I went online and found some documentation regarding copying the database etc., however, when attempting to copy from the SQL 2000 (DB in SQL 7) to 2005 (I have SQL 2000 and 2005 on my machine) when I try and connect to the 2005 box, its listed as one of the instances but will not connect.
For grins and kicks I backed the database up in the 2000 environment and restored it on a test machine which is in 2005. The Advisor was correct, I am unable to create a Database Maintenance Plan, which I find odd. The Database shows up under the databases but will not show up in the list of db's to create a plan for. So, I attempted to create the jobs and alerts manually.
There has to be an easier way to do this, can anyone help?
View 3 Replies
View Related
Sep 6, 2006
I have a SQL7 server that runs one database for our company. The rest of the datastore is on a SQL2005 server. How best can I transfer the SQL7 database to SQL2005?????
View 4 Replies
View Related
Jul 1, 2007
Hi,I move my website to our production server who use SQL 2005 instead of SQL Express.The website was, of course, developped with SQL Express.Where can i find the steps that i need to configure the SQL 2005 server for working with my SQL Express database.Thanks
View 4 Replies
View Related
Dec 15, 2005
Hi all,
I have a Database in SQL Server 2000 with several objects (tables, views , stored procedures , functions ).
Is there any specific procedure or tool by which I could migrate the entire database to SQL Server 2005.
Any help would be appreciated.
Thanks,
Hari Haran Arulmozhi
View 1 Replies
View Related
May 15, 2007
Hi all,
I'm in need of migrating DB's from a SQL 2000 server to a new SQL 2005 server. Has anyone had any success in this or does anyone know of a process which would be best for this situation?
Here's my setup...
SQL2000 SERVER....OS - Server 2000
MDF's/LDF's reside on D:MSSQLData
Backups reside on D:MSSQLBackup
SQL2005 SERVER....OS - Server 2003
MDF's/LDF's reside on E:MSSQLData
Backups reside on E:MSSQLBackup
Any information on how to get these DB from 2000 to 2005 will be greatly appreciated.
View 9 Replies
View Related
Jun 12, 2007
Hi, since havenot done migration yet, my company is planning to migrate from sql 2000 to sql 2005 server. and i am in group for capacity planning. can anybody suggest me the steps i should be really taking in order to migrate to 2005, if anyone has done the it in real world with database up to 50g.
thanks
Derek
View 1 Replies
View Related
Mar 26, 2008
Guys! Very very junior in this migration part. Hope the seniors can help out....PLEASE!!!!!! Don't get me wrong asking you guys to spoon feed me. I have read a lot of articles and even BOL and also not to forget read millions of books on this. But just wanted to make sure that I am in the right path and want to do this without any problem. That's why I have decided to ask the Gurus here who have done this in past.
I have this machine now:
Microsoft SQL Server 2000 - 8.00.2040 (Intel X86)
Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: )
Migrating to this machine:
Microsoft SQL Server 2005 - (X64)
Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
I have these in the SQL Server 2000 box:
1. Databases, tables (of course)
2. Views
3. Securities(Logins, Roles, Password)
4. DTS packages
5. Jobs
6. Replications
7. Linked Servers
8. Stored Procedures
Every article is different. I was confused at a point of time. Please show me the right way guys!
View 8 Replies
View Related
Mar 27, 2008
Yesterday I started this topic and I came step by step higher and now I have finalized my steps to migrate.
Seniors and Gurus and who has done this before, please review and correct me where I am wrong and/or add some tips for me to have this one going on successfully! Thanking all of you guys in advance! Here is what I have:
Before Migrating:
1. Install Service Packs, Security Patches and Hot Fixes
2. Install DTS Designer Tool from Microsoft to prevent conflict and failure of migrating current DTS packages to SQL Server 2005
3. Backup EACH and EVERY Database and double check the .bak files whether it exist and backup was successful
4. Just before migrating, reboot the server to clarify that the SQL Server Services and SQL Server Agent is working
When you are ready to migrate:
5. Make sure there are no users trying to connect to the OLD AND the NEW SQL Server. Inform them well in advance about the downtime. Shutdown any applications or websites that might be accessing the SQL Server.
6. Stop the SQL Server, SQL Agent and MS Search Services on the NEW SQL Server
If downtime is not possible:
7. For ever changing OLTP database, by the time you restore the backup onto the new server, the old server would have received more changes. To avoid this problem, you need to resort to log shipping. Log shipping is nothing but an automated process of backup and restore. The following steps will explain the process of log shipping (Note that SQL Server 2000 Enterprise Edition provides inbuilt logs hipping. We don't need that for this purpose. We can simply create a job that backs up and restores the databases
8. Create a job on the old server, with two steps. The first steps backs up the transaction log of the OLTP database. The second step restores this transaction log backup file onto the new server, using WITH STANDBY or WITH NORECOVERY option of the RESTORE command. Schedule this job to run every 10 minutes or 15 minutes, depending on the volume of transactions your OLTP database receives
9. This job will take care of shipping all new transactions since the full database backup, to the database on the new server. Let this job run until you can afford some downtime on your production database (that is, mid-night, or early morning, or a planned maintenance window)
10. Now to be doubly sure, no new transactions are coming in, set the database in 'single user' or 'dbo use only' mode. Take one last transaction log backup of the production OLTP database, and restore it onto the database on new server. This time use the WITH RECOVERY option of the RESTORE command
11. Run UPDATE_STATISTIC on User Database to reorganize all indexes
Considerations:
12. Security - The security model changed along with object ownership, but users that own objects will be turned into schemas and all of the object and role permissions will come over. These you will want to look over afterwards, but they should be ok.
13. Unless you have hundreds of them, it is always better to re-create them after upgrading. You cannot detach an MSDB database on a 2000 server and attach it on a 2005 server and have it work. Fortunate in this, we can script out the jobs from SQL Server 2000 and run it on the new SQL Server 2005
14. Typically you will have to re-create your replication too. Again, the good news is that you can generate the scripts for replication on a 2000 server and execute them on a 2005 server and it will create the appropriate articles and publications
15. For DTS packages, it is always recommended to use the Package Migration wizard to do this so that less or no problems will be encountered. Consider about the jobs previously set.
16. Logins can be created by using sp_hexadecimal and sp_revlogin2005
View 6 Replies
View Related
Feb 12, 2007
Help. I have been tasked with upgrading a 2000 instance to 2005.I have actually done this before, but it was a long time ago, and Ididn't do it alone. Now, the sitation is little different, and I needto know the EXACT steps to take.Does anyone have a FAQ or link that outlines migration steps? I foundone on sql server central, but it isn't very detailed.One of the important things I need to know is, how do I create arollback plan if I am upgrading from 2000 to 2005 on the same server(instance)?Also, why can't I seem to find a comprehensive list of TO DO's whenupgrading? Doesn't microsoft provide this? You would think so. I willrun upgrade advisor first, but isn't there also documentationsomewhere?I seem to recall lots of permissions issues that arose with 2005.HELPThanks
View 4 Replies
View Related
Jun 21, 2007
Hi Friends,Is there any tool or assistant to upgrade SQL 2000 to SQL 2005.Thanks,Arunkumar
View 2 Replies
View Related
May 18, 2006
I am in the process of migrating from [Source] SQL Server 7.0 sp4 on windows NT to [Target] SQL Server 2005 on Windows 2003 Server.
Please suggest me what should be the migration approach it this case.
Would De-attach and attach of DB still be valid if OS changes? (both are 32 bit OS).
regards
View 4 Replies
View Related
Mar 29, 2007
I would like to find out what the steps are to migrate a 2000 database up to 2005?
View 4 Replies
View Related
Aug 14, 2007
Hello guys, I have vry basic question. I'm migrating from 2000 to 2005. MY question is do we have to recode all packages or just migrating of old 2000 DTS is fine. If so, then I can see only small icon of DTS package in 2005, whihc is not showing the details of DTS. Kindly, explain me what do i really do, migrating old one or re-creating new in 2005. Thanks in Advance
View 1 Replies
View Related
Sep 16, 2007
Hi:
When I try and connecto to SQL CE I always get an invalid operation exception. I"m afraid that I did not follow the proper install for Orcas Beta 2. I can't remember if I was supposed to uninstall SQL Mobile 2005 first or not.
All I know is when I try and use my SQL CE I can't connecto to a DB / sdf file ?
Any help would be appreciated I"m just starting to use SQL CE.
thanks
mark
View 2 Replies
View Related
Apr 2, 2008
Has anyone had experience of migrating from 2000 to 2005 on the same box , and maintaining the SERVERNAMEINSTANCE_NAME.
What are some effective ways of migrating and retaining the same servername/instance name ?
The issue revolves around minimising the use of extra boxes , as I would like to do the migration on the same server and keep the name the same .
Jack Vamvas
--------------------
Search IT jobs from multiple sources- http://www.ITjobfeed.com
View 3 Replies
View Related
May 23, 2007
Hi,
I have a database on a SQL Server 2000, and would like to migrate it to a new server machine that has SQL Server 2005. has anyone already tried this, and can you please provide the steps to follow.
Thank you.
View 7 Replies
View Related
Sep 28, 2007
Hi,
We are migrating from SQL Server 2000 to 2005. We currently use ADO.Net to make connection to sql server. I just want to know after migration to sql server 2005 do we have to make any changes in code in the way we make connection to use ADO.Net2 which is part of sql server 2005. ??
Thanks
Arvind
View 1 Replies
View Related
