I've a database in Access 2003 that I want to migrate to SQL CE since Pocket Access is no longer supported.
I've researched extensively this issue to no avail.
Even tried to use the ADS but it's not feasible,
Please, any help is welcomed!
I tried various ways to migrate an access 2003 database with 1 table to
sql Express 2005 Edition without success, I can only find the resulted
sql database in Sql Server Express Edition 2005 without data.
Please advise if any help.
We are running SQL 7, using Access 2000 as a front end. Our network personis wanting to migrate to Windows 2003 (we're currently on Windows 2000), andwants to know if we should migrate to SQL 2003 at the same time. Are theremajor changes between SQL 7 and SQL 2003, and how hard of a task would it beto migrate our single database to a new version of SQL?Thanks,Neil
View 11 Replies View RelatedWe migrated a MS Access 2003 mdb into MS Access 2007. The mdb has linked tables to SQL Server via a DSN and utilizes a mdw file. In 2003, the username/password is "passed" to SQL Server, so the UID/PWD that is used for opening the mdb, is used in SQL Server.
Opening the same file in 2007 using the same mdw, gives a secondary login on SQL Server.
Is there a way to have MS Access 2007 pass the UID/PWD to SQL Server on linked tables, the same way that 2003 does?
Thanks!
I am trying to connect through ODBC connectivity, but it will not allow me to do so. I have investigated this matter. It leads me back to the server, because as I was configuring my client side database. It kept asking for the DSN(datasource name), but I was unable to choose one because there wasn't one to choose. Which is my current dilemma, How can I do this and have it available to choose from the server to satisfy the Access database?
I went to the domain where the software resides but I don't know what steps to take? I also found an interesting piece on microsoft about Kerberos, but I can't follow along according to the instructions it has. I have Access 2003 & SQL SERVER 2005, HELP...!
Basically, this is right off the heels of the install. I setup the server without the connectivity, but it is running the current configuration.
I developed a database with Access 2003 and everything was working good until my tech came in and reformated my hard drive and install a new Ghost image that met our company standards.
Now I cannot go in and make any changes to any of the tables, queries and forms. All of this started when a new Ghost image was installed on my pc.
The message I get when I try to open my database is "You do not have permission to run "tblSwitchboard." I get the same error message when I try to do anything at all on the database.
I am at a loss as to what to do. Please help.
I am migrating my database from Access to MS SQL. I successfully migrated most of the Tables but I am going through a hellish time with queries/views
Can somwone tell me how to convert this query from Access to MS SQL:
-------------------------------------------------------------------------------------------------------------------
SELECT Manage_Pre_Award.A_ID, Manage_Pre_Award.Event_Name, Manage_Pre_Award.Plan_Date, Manage_Pre_Award.Actual_date, Manage_Pre_Award.Rev_Date, IIf([actual_date] Is Not Null,[actual_date],IIf([rev_date] Is Not Null,[rev_date],IIf([plan_date] Is Not Null,[plan_date],Null))) AS workdate,
FROM Manage_Pre_Award
WHERE (((Manage_Pre_Award.Rev_Date) Is Not Null)) OR (((Manage_Pre_Award.Actual_date) Is Not Null)) OR (((Manage_Pre_Award.Plan_Date) Is Not Null));
-----------------------------------------------------------------------------------------------------------------------
I have already tried this but get:
The Query Designer does not support the CASE SQL construct.
SELECT Manage_Pre_Award.A_ID, Manage_Pre_Award.Event_Name, Manage_Pre_Award.Plan_Date, Manage_Pre_Award.Actual_date,
Manage_Pre_Award.Rev_Date,
CASE WORKDATE
WHEN [actual_date] IS NOT NULL THEN [actual_date]
WHEN [actual_date] IS NULL AND [rev_date] IS NOT NULL THEN [rev_date] ] ELSE [plan_date]
END AS WORKDATE
FROM Manage_Pre_Award
WHERE (((Manage_Pre_Award.Rev_Date) IS NOT NULL)) OR
(((Manage_Pre_Award.Actual_date) IS NOT NULL))OR (((Manage_Pre_Award.Plan_Date) IS NOT NULL));
Hi guys, its been awhile. I inherited a database thats an MDB and I need to get it on to sql server but I am having problem with this query, can anyone help please. Its suppose to give you the month and year when you click on it, you just put that in and up come the results on a query or report, now I have something similar to this but the code is very different.
SELECT Format$([Main Table].Date,'mmmm yyyy') AS [Date By Month], [Main Table].[Action Type], Sum([Main Table].[Action Type]) AS [Main Table_Action Type]
FROM [Action Type] INNER JOIN [Main Table] ON [Action Type].ID = [Main Table].[Action Type]
GROUP BY Format$([Main Table].Date,'mmmm yyyy'), [Main Table].[Action Type]
HAVING (((Format$([Main Table].[Date],'mmmm yyyy'))=[Enter the month and the Year]));
We have a huge Access database located on a server, but now it is going very slow due to the transport of Mb file to the clients.
We could export the tables to a SQL server and attach the tables to the access clients.
So the question is, will access still treat the tables as it use to or could we expect access SQL querys to request the sql server as normal. Will access process the query on the client side?
Thanks
Provo
We use MS Access 2000 as our database, but run into lots of proplems. So we decided to research the migration to SQL Server.
I used Access Upsizing utitlity to migrate tables and their data to SQL server very easily, and all the relationships, indecies and other information are converted correctly.
Next is to migrate the queries. I found that to be a pain. Is there any tool out there that can do it for me? Any help is greatly appreciated.
Once that's done, then it's the application itself, but I am not worrying that for now.
Thanks, guys
The company i am working for has been using an Access database for purchasing and inventory. this has become to small/dangerous due to the number of records and frequent 'database needs repair' errors. I am trying to migrate the database to a sql server w/ access front end and am runing into problems with most of the VB proceedures that are built into the database. the most common at the moment is a 'Write Conflict' error saying someone else changed the record i am editing. i know this can't be the case becasue i am working on this in an isolated environment. I have traced it to a VB script that changes a field from 'Entering' to 'Pending' (text field) on the click of the 'new record' button. any ideas?
Access 2000/2003, SQL server 2000
Hi there,
I am totally new at SQL/SQL express.I have downloaded the sQL express server and wanted to know how i can go about exporting my tables which i created using MS access into SQL express.
Also my application is currently working by using Access and ASP...what will be the changes i would need to incorporate in my code other than the queries and Data connection string.
How would the data connection string in SQL look like if i am using it in my asp code?
Any help or useful links would be a very good help!
thanks in advance
smita
Hey guys, I had purchased a program that generates full operational asp.net pages from an access db. I was unfamiliar with the language, and so that was the route I took. After disecting it and studying I've learned a bit and made it work in my environment. However, I now need to migrate everything over to mssql. I got the db portion down and now I'm trying to modify my scripts to point to a sql db rather than an access db. I thought it was going to be relatively simple but it's proving to be quite a challenge for me.Was wondering if anyone could check my work.
The original access driven page had the following connection strings.vb page had [ public strConn as string="PROVIDER=Microsoft.Jet.OLEDB.4.0;DATA SOURCE=" & Server.MapPath("../") & "/db/db.mdb"end class]and in my aspx. pages I hadAccessDataSourceControl1.selectcommand="SELECT * FROM table "AccessDataSourceControl1.ConnectionString = strConn
My new page now has the following.I got rid of the .vb page and put this in.
Dim myConnection as New SqlConnection("Server=mysqlserver;Database=db;UID=myusername;PWD=my pw;")
Const strSQL as String ="SELECT * FROM table"
Dim myCommand as New SqlCommand(strSQL, myConnection)
further down I have a wmx data grid. I'm assuming I don't need to touch that but there is a line that has,
<wmx:AccessDataSourceControl id="AccessDataSourceControl1" runat="server" ></wmx:AccessDataSourceControl>
and I don't know what the equivilant of that is. I know its pointing to the accessdatasoucrcontrol1 that has the select command, but what would be the equivilant ofwmx:accessdatasourcecontrol?Also, is this the way to go? by that i mean, should I just rescript everything? Also,
1) Am I connecting to the sql db properly? 2) some sites say I have to put a connection string in the web.config file, is that true?3) Does any one have any references I can goto, I'm having some trouble finding a good article that lays down exactly what needs to go where in an sql asp.net environment.
Thanks guys.
Hi,
We are planning to migrate data from access to sqlserver. I have good knowledge on sql server...but never used access to migrate. Can anyone help me with the basics to be kept in mind and methods and errors you get in migrateing data.If possible explain in detail and what is to be done while migrating data.....thank you in advance.And its urgent please.
I have a query in Access that has an iif statement in the select system like so:
SELECT [01_qryCommonCost_01].*, tblPercent_Afe.AfeDescription,
tblPercent_Vendor.[Vendor%], tblPercent_Afe.[Afe%], IIf([manual%] Is Not
Null,[Manual%],IIf([PropType]="NonMkt",0,IIf([Vendor%] Is Not
Null,[Vendor%],IIf([Afe%] Is Not Null And [GlType]<>"OpExp",[Afe%],[Gl%]))))
AS [%], 0+round2([Amount]*[%]) AS Allocated,
0+round2([Allocated]*[Salvage%]) AS Salvage
FROM (01_qryCommonCost_01 LEFT JOIN tblPercent_Vendor ON
([01_qryCommonCost_01].GlType = tblPercent_Vendor.GlTyp) AND
([01_qryCommonCost_01].VendorName = tblPercent_Vendor.VendorName)) LEFT JOIN
tblPercent_Afe ON ([01_qryCommonCost_01].AfeNo = tblPercent_Afe.AfeNo) AND
([01_qryCommonCost_01].Group = tblPercent_Afe.Group)
But I can't figure out how to nest the iif statement in T-SQL. Any hints?
Hi,
I need to migrate my access database to SQL2000 Server. I have three tables in my access database. In each table have 3000-6000 records.
So how to put all these records in to sql2000 server tables.
The table structure in Access database and sql2000 database are same.
Here core work is just insert all these 3000 - 6000 records (rows) from Access database to sql2000 database
Thanks in Advance!!
With regards
Shaji
Afternoon all,Apologies for cross-posting but as my query covers both Access and SQLServer I thought I'd send it both!I have inherited a project to migrate a fairly complex series ofAccess databases into a single proper SQL database with a web frontend.Its quite a nasty job as people are working on a variety of data setsat several Universities around the world and the data has got verymessy; hence the requirement to put it all on one live web enableddatabase server and provide a web-based front end (particularly assome users insist on using Macs so can't run Access as a front endanyway).If anyone could give me hints on how to perform such a migration or ifanyone knows of any good books or other documents on this I'd begrateful for assistance.Many thanksRich MayMuseum of London
View 9 Replies View RelatedFirst off, sorry if my cross posting offends anyone. I'm posting thisin Access and SQL Server groups - not sure which one is appropriate.I have a relatively simple ASP.NET/VB.NET application that is nowhitting an Access 2000 database over an intranet. We have to migratethe database to SQL Server 7. My experience with ASP.NET is prettylimited and my experience with SQL Server is nonexistent.We have an MSDN subscription, so I went to the downloads section to getSQL Server 7. Guess what? SQL Server 6.5 is available, as is 2000 and2005, but no SQL Server 7. So my first question is, does anyone know ifit is available for MSDN subscribers?The next question is, does anyone know of a good resource that explainshow to make the transition from Access 2000 to SQL Server 7? I know thedata has to be migrated and the connection between the application andthe database modified, but am really not sure exactly what to first andthe correct way to go about it. The application is a simple productconfigurator. There's not a lot of data and it's not a very complexdatabase.Thanks in advance. If you'd like, please copy responses tolcifers(AT)yahoo.com (AT) = @TIA.Cheers.- Luther
View 2 Replies View RelatedI want to migrate my Access XP database to SQL Server 2005 Express Edition. The Start Menu does not display any migration assistant in SQL Server 2005 Express menu list.
How to migrate it?
Hello all, i hope someone that understands SQL can help me.
I have a report that runs from a access query, which is simple.
My problem is that i get an overflow error becuase one of the queries formulas are to divide some numbers and in this one instance there is a "0" involved.
My formula is:
Col2%: [Col 2 Hrs]/([TotHrs]-[Col 6 Hrs])
The problem is that [Col 2 Hrs]=0 this month for a specific employee.
In excel i know i can do
=IF([Col 2 Hrs]=0,"0",([Col 2 Hrs]/([TotHrs]-[Col 6 Hrs])))
and that works fine.
Can someone please show me how to do this in SQL so instead of returning an error it will display 0 or N/A.
Thanks inadvance
Hope i explained my issed well enough for everyone.
Is there a patch available for Access 2003 that will allow it to interoperate fully with SQL 2005?
View 1 Replies View RelatedHello,
I'm very new to MS SQL Server; I just downloaded Express 2005 yesterday. I have it up and running; it seems to be working fine.
Now onto business - I need to migrate data from existing MS Access 2003. How, exactly, do I do this? I've tried searching MSDN, TechNet, and here, and while I get results that seem to tell part of the story, I don't seem to get a true "How to" for this task.
Can someone please assist me with this?
Thank you.
I am upsizing an Access 2003 database to SQL 2005 (SP2)
I frequently use the criteria forms![formname].[fieldname] in Access queries to open reports or forms in Access but cannot find an SQL equivalent. Can anyone please point me in the right direction?
Many thanks in advance
Neil
Is there a way to integrate Access 2003 as the Front End for SQL Express?
I tried, but I can't make a new Access project because I need to specify a login/pass and I have no idea what those are set to, or if I need to make an account somehow.
As you can see, I am totally new to SQL and any help would be appreciated.
Thank You,
James
We use SQL Server 2000 on the back-end of our directory web site and ASP on the front end which works fine. However, for my own uses (since I don't create the asp and have to pay a programmer), would it be better to set up an Access 2003 project for my own data entry forms, standard reports and quick searching?
What would be the negatives of this approach. Remember, this is just for me.
Thanks in advance,
Kelly
Hi all,
I have SQL Server 2005 Express running and I am creating a database through access (Access 2003 SP2) and no problem it creates the database...
But when I try to create other objects like views and database diagrams, I get the message below which is quite detailed but I just don't know where to get the service packs or updates needed to have this problem solved. Can anyone point out what the problem and the fixes are?
Here is the message that I get:
"This version of MS Office Access doesn't support design changes with the version of MS SQL Server
your access project is connected to. See MS Office Update Website for the latest information and
downloads (on the Help menu, click Office on the Web). YOur design changes will not be saved.
You have connected to a version of SQL server later than SQL Server 2000. This version of Visual Studio
or Access that you are using was released before teh version of SQL Server to which you are connected.
For this reason you might encounter problems.
Please check with MS to see if there is a service pack that you should apply to Visual Studio or Office
in order to get support for the version of SQL Server to which you are connected.
You can continue but any new object types might not be enumerated, and it will not be possible to
save any objects or database diagrams thatyou create using the Visual Database Tools."
Thanks
I am a fresher in using SQL with access.
I am using a code in Ms access to link a table that is in Sql express 2005.
I use this linked table name to download records to the local Access table.
The link is then dropped in Access.
Is there any way to write back records into the linked Sql table from Access.
It does not allow me to delete / add / modify records of a linked table.
How can I do this.
Thanks
Sjohn
Does anybody know if there is and update for access 2003 which could make it compatible with SQLServer Express. Actually XML Field are not supported, Diagram too, and surely much more.
Any help would be appreciate.
i am trying to exporting sql 2000 to ms access 2003 with relationship also exported to access as well as the data.
help plz
I am trying to configure a bulk table upload from a 2003 Access table to a matching table in SQL with SSIS. I can configure the source file but am unable to configure the destination. When I configure the SQL source and use SQL Native Client I get an error message of:
The selected connection manager uses an earlier version of a SQL server provider. Bulk insert requires a connection that uses a SQL server 2005 provider.
When I go through the new connection setup I don't see any available provider named like that. I believe the SQL server I am loading to is a 2003 version.
I recently started developing a new Access project for a client, and decided to try out Access 2003 with SQL Express 2005. Everything was going fine until I tried to modify a table from within Access. I got an error message that SQL Express is incompatible with Access 2003, and it suggested I go to the Microsoft website and search for a patch/upgrade to solve this.
I tried to ignore it, and it started warning me that none of my table edits would be saved.
I looked around, but I can't find anything about this.
Is this true? Is there a patch to fix this?
How can I avoid the error?
I keep getting this error:
----------------------------------------------------------------------------------------------------------------------------------------------
Run-time error '2749':
There isn't enough memory to complete the Automation object operation in the OLE object.
----------------------------------------------------------------------------------------------------------------------------------------------
Here is the code:
----------------------------------------------------------------------------------------------------------------------------------------------
Private Sub cmdLoadOLE_Click()
Dim MyFolder As String
Dim MyExt As String
Dim MyPath As String
Dim MyFile As String
MyFolder = Me.SearchFolder__
' Get the search path.
MyPath = MyFolder & "" & "*.jpg"
' Get the first file in the path containing the file extension.
MyFile = Dir(MyPath, vbNormal)
Do While Len(MyFile) <> 0
'[fldID] = CInt("4869")
[fldID] = CInt(Replace(MyFile, ".jpg", ""))
[fldOLE].Class = "MSPhotoEd.3"
[fldOLE].OLETypeAllowed = acOLEEmbedded
[fldOLE].SourceDoc = MyFolder & "" & MyFile
[fldOLE].Action = acOLECreateEmbed
[fldOLE].Action = acOLEClose
' Check for next OLE file in the folder.
MyFile = Dir
' For Access 97 only, use the following line of code:
DoCmd.RunCommand acCmdRecordsGoToNew
Loop
End Sub
----------------------------------------------------------------------------------------------------------------------------------------------
hello guys,
i am using MS SSEE installed by WSUS3.
Due to a server reinstallation and new synchronisation of WSUS i have to approve/reject nearly 1200 Updates for Windows XP/Vista/Server 2003 and different Office Versions.
The new MMC lost some features to do this easyly (Filters)
Because of these missing functions i intend to install "Microsoft SQL Server Management Studio Express" to get connection to the SSEE and then create an Access-Frontend to add the functions i am missing.
Could you please tell me if this might work?
Somwhere in this forum i read, that the SSEE was intend to be not accessable.
Thanks Marcus