Migrating Reporting Services 2005 With Integrated Sharepoint 2007 To Another Server
Sep 27, 2007
hello good afternoon, I am having this issue, I need to move reporting services from one server to another, but I need that credentials, roles and reports stay the same. But as the reporting services is integrated with sharepoint, dont know if I can move both at the same or it has to be done one at a time. this is just data migration, but still I will like to Know how it can be done having the same structure with the roles and credentials. or it is prefered to do a ghost?? but the issue will be that we have the reporting services in one place and the data in another... don´t know how this will affect. thanks in advanced for the help.
View 1 Replies
ADVERTISEMENT
Jun 30, 2007
Hello Everyone,
I have been banging my head against the wall with trying to integrate SharePoint 2007 and SQL Reporting Services. I have been following these 2 websites down to the letter in trying to configure everything:
1. http://msdn2.microsoft.com/en-us/library/bb326356.aspx <---Microsoft's Steps
2. http://blogs.msdn.com/sharepoint/archive/2007/02/19/microsoft-sql-server-2005-sp2-reporting-services-integration-with- wss-3-0-and-moss-2007.aspx <---SharePoint Blog Group
Basically my setup is as follows:
Server 1 = SharePoint 2007
Server 2 = SQL Server Reporting Services SP2 / SharePoint 2007 services
Server 3 = Database
Server1 is setup and running SharePoint 2007 fine with no problems. It was installed under the complete option with its own server farm. Then with the Server2, SharePoint 2007 is installed again, also under the complete complete option, and configured to join Server1's server farm. In this way, Server2 is able to supply Server1 with services and it has been said that if you are using 2 different servers, one for SharePoint and one for Reporting Services, you need to have an instance of SharePoint on the reporting services box. With a SharePoint "front-end" the reporting-services now has a way to also join Server1s farm.
This is where the headache begins....the SharePoint install is successful on Server2 and the services are started as evident through the Central Administration page. The next task is to install SQL Server 2005 Reporting Services and then the SQL Server 2005 SP2 patch.
After installing SQL Server and the SP2 patch, you go into the SQL Reporting Services Configuration Manager and setup the Report Server, Database, and SharePoint integration. I configure everything to run under the "DefaultAppPool" under IIS, and I get green accepted checkboxes on everything.
Finally, the last step is to install Microsoft SQL Server 2005 Reporting Services Add-in for Microsoft SharePoint Technologies on Server1. This add-in actually allows the connection between SharePoint on Server1 to the Reporting Services on Server2. The install is successful and the extra options for reporting pop up under Central Administration page. When configuring the final connection under the Central Admin I referred to the following Microsoft Page:
http://msdn2.microsoft.com/en-us/library/bb326213.aspx
For the "manage integration settings", I set the report server to Server2 and use Windows Authentication. Then for the "grant database access" I use Server2 and login with my credentials...
PROBLEM: Then for the final step of setting the server defaults, I click on the link and get the following error:
"An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. "
I have googled and tried installing/uninstalling several times, but it seems that I keep getting hung up here. When trying to access reports on the ReportServer, the same error message comes up.
If anyone is familiar with integration between SharePoint and SQL Reporting Services, and may have any ideas/comments/advice, I would greatly appreciate it. Thanks in advance! =)
--A4orce84
View 4 Replies
View Related
Feb 6, 2008
Well, I have SQL Server 2005 SP2 Reporting Services installed and configured in sharepoint integrated mode, so I am deploying reports in sharepoint libraries. Also I configured sharepoint to use forms authentication with builtin AspNetSqlMembership provider, but after this action I couldnot open reports through sharepoint library, instead of this, error was displayed mentioned below. I searched and found hotfix Cumulative Update 3 build 3186 for this issue, request it from microsoft support and applied it, but nothing has changed!
Error I have been experiencing is following:
An unexpected error occurred while connecting to the report server.
Verify that the report server is available and configured for
SharePoint integrated mode. --> The request failed with the error
message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="/_layouts/login.aspx?ReturnUrl=
%2f_vti_bin
%2fReportServer%2fReportService2006.asmx">here</a>.</h2>
</body></html>
I continued to dig and find out that this hotfix should update Microsoft.ReportingServices.SharePoint.UI.WebParts.dll from version 9.0.3042.0 to new version 9.0.3180.0, but when I checked file version after applying hotfix, it remained the same as was before i.e. 9.0.3042.0. Apparently this cumulative update does not fix this issue.
anyone has any idea how to solve it? Thanks in advance.
sorry for my poor english :-)
View 2 Replies
View Related
Jan 18, 2007
Hi,
I am working on sharepoint 2007 integration with reporting service 2005. There are few facts which i am trying to understand and need some clarifications. Please provide your comments
1) While configuring "Database setup" in Repoting Service Configuring Manager" i found two modes 1) Native and 2) SharePoint Integration. When creating a report server database if we check "Create the report server database in Sharepoint Integration Mode" then it set the mode to "SharePoint Integration Mode". There is no option of switching the same database to native mode. So i have to create another database in "Native Mode". (IS THIS CORRECT. DO WE NEED TO CREATE TWO REPORT SERVER DATABASE SEPERATE FOR SHAREPOINT INTEGRATION AND NATIVE)
2) I am using the new report viewer web part in sharepoint 2007. When i am in sharepoint integration mode i can create datasource, report model and with report builder i can create rdl file. On selecing any RDL file in doument library and it gets displayed in Report Viewer Web Part. When i switch to Native mode i want to configure the web part to use the report created with SQL Server Bussiness Intelligence Dev Studio and deployed on http://localhost:808/ReportServer. (IS THERE ANY WAY SO THAT I CAN EXPORT AND IMPORT ALL .RDL FILE FROM http://localhost:808/ReportServer to http://localhost/ReportServer)
I AM NOT ABLE TO CONFIGURE WEB PART WHEN I AM IN NATIVE MODE i.e giving path of .RDL in report textbox throw a error saying "Item not found" i tried all combination. THIS can be related to datasource not reading in .RDL file in native mode while confuring report viewer web part.
http://localhost:808/ReportServer (Report Server)
http://localhost/ReportServer (SharePoint Mode) (Default Top Level Site)
3) LAST : I want to create a .RDL file report from the data in sharepoint, say lists or news etc. So when creating a RDL file how can i connect to sharepoint database. I read some where that in previous release they used to DATA EXTENSIONS and get the data from list in sharepoint with something like http://<servername>/<sitename>/List=Announcement when creating RDL file. Is the alternative in new release to create the report based on sharpoint list data.
Thanks and i would really appreciate your help
View 3 Replies
View Related
Nov 21, 2015
I verified logs for reporting services integrated with SharePoint and I found many errors like this:
Cannot find site lookup info for request Uri [URL].
what is wrong with configuration?
View 2 Replies
View Related
Jul 27, 2006
I'm trying to install SharePoint 2007 and Reporting Services 2005 on the same server. However after installation Reporting Services will not load at http://localhost/Reports. Instead I get the following error:
Server Error in '/Reports' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Cannot use 'partitionResolver' unless the mode is 'StateServer' or 'SQLServer'.
Source Error:
Line 164: </webParts>
Line 165: <machineKey validationKey="DA65D9E6980E9CDB52426BF3C793EBAF7FBA3B866117F3CC" decryptionKey="9D7E984E12AA43FDECAB1E05D1E952822680D27BD1F37439" validation="SHA1" />
Line 166: <sessionState mode="SQLServer" timeout="60" allowCustomSqlDatabase="true" partitionResolverType="Microsoft.Office.Server.Administration.SqlSessionStateResolver, Microsoft.Office.Server, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
Line 167: </system.web>
Line 168: <runtime>
Source File: C:InetpubwwwrootwssVirtualDirectoriesc76013d9-5b44-4d06-96dd-24fede1ea955web.config Line: 166
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
I assume that something is wrong with my virtual server set up. I have the Default Web Site stopped and SharePoint (80) running and set Reports and ReportServer using the Report Configuration to SharePoint (80).
I can get to http://localhost/ReportServer but I get this error when running a report from there:
Reporting Services Error
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
The type Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c does not implement IReportViewerMessages or could not be found
Has anyone set these up on the same server? Is there a document around on how to set this up?
Thanks
Kevin
View 5 Replies
View Related
Apr 13, 2008
I am trying to follow the instructions on:
http://technet.microsoft.com/en-us/library/bb677365.aspx
they contain many "if"s and links to other sites and I got totally confused and stuck.
The idea is - I need to have one machine with SQL for reporting services and SharePoint databases and the reporting services and the other machine for a complete SharePoint installation (the main server of the farm)
Now I have done the following:
two servers (lets call them SQL and MOSS)
The domain contains the following users:
sqlservices: for running all the SQL services and reporting services
moss: for administering MOSS databases
moss-services: for running all the MOSS services
Machine SQL - installed Windows Server 2003 Standard Edition SP1, joined to the domain as SQL
The following is done from a local Administrator account:
IIS 6 with ASP.NET installed
SQL Server 2005 with SP2, Reporting services installed but not configured
all the services are running as domainsqlservices
.NET 3.0 installed
http://support.microsoft.com/kb/918642 fix installed
done WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regiis €“i
MOSS as Web Front installed, not configured
Machine MOSS - installed Windows Server 2003 Standard Edition SP1, joined to the domain as MOSS
The following is done from a local Administrator account:
IIS 6 with ASP.NET installed
.NET 3.0 installed
http://support.microsoft.com/kb/918642 fix installed
done WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regiis €“i
Computers->My computer->DCOM Config->IIS WAMREG admin Service->PropertiesSecurity->Customize->Edit, added domainmoss-services and domainMOSS users with rights Local launch, Local activate
MOSS Complete installed, configured for: New server farm
Database server: SQL
Username: domainMOSS
Port: Default
Auth: NTLM
SharePointRS.msi installed to enable RS in SharePoint Admin page
Then temporarily gave to the user domainMOSS sysadmin rights in the SQL server on the SQL machine to avoid errors with creating databases while configuring SharePoint from the Admin Portal.
From the Admin Portal configured
Office SharePoint Server Search with domainmoss-services account
Shared Services Administration €“ New SSP created with 2 separate web apps for SSP and MySites, both app pools run as domainmoss-services and SSP itself runs as domainmoss-services
Windows SharePoint Services Search configured, Service Account - domainmoss-services, Content Access Account - domainmoss-services
Everything went OK.
Now came back to the machine SQL:
run Reporting Services Configuration and:
Report Server Virtual Directory €“ created new, called it ReportServer. When hit Apply, the applicatin suddenly quit, but I checked €“ the Virtual Directory was registered on the IIS and working.
Checked if Windows service identity is domainsqlservices, OK.
Web service identity: Application Pool: New
Name: ReportServer
Windows Account: domainsqlservices
Apply, everything went fine.
Database setup: choose server SQL, Connect
Database name: New name: ReportServer,
checked Create the report server database in SharePoint Integrated Mode
OK
Credeantials Type - Service credentials (I guess it means previously set domainsqlservices will be used)
Apply,OK, everything went fine.
Launch SharePoint Products and Technologies Configuration Wizard, Connect to an existing farm, Database server: SQL, Retrieve datbase names: selected SharePoint_Config, Username: domainMOSS, Next, everything fine here.
Now as far as I understand I need to give reporting services an access to SharePoint databases? Went to the machine MOSS, launched SharePoint 3.0 Central Administration:
Application Management-> Reporting Services-> Manage integration settings, URL: http://SQL/reportserver, Windows Authentification, OK
then back, Grant database access-> Server Name: SQL, OK, now it is asking for credentials. And now the problem: no matter what I enter (domainsqlservices, domainMOSS) I get a message: €žA connection to the computer cannot be established€?. Why, why, why?
I can ping the server, SharePoint services are running fine and they are using the SQL server on the SQL machine and there are no errors in the event viewer (they should be if there were any problems to connect the SQL databases).
If I enter wrong credentials, I receive "Unable to log on with the given username and password.", so I guess there IS a connection to the computer (or how else could SharePoint determne that login is wrong?).
Also, if I open http://SQL/reportserver, I get €žThe report server has encountered a configuration error€? and the log in C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFiles says €žSharePoint content service is null. Report Server may not have joined the SharePoint farm, or Report Server service account may not have been granted access to farm.€? I guess it is OK while I have not granted access to the SharePoint databases?
Please, show me, what did I do so wrong that €žA connection to the computer cannot be established€?? How can I grant the access and finalize configuring Reporting Services?
Thanks.
View 9 Replies
View Related
Jul 8, 2015
We have a Report Server integrated with SharePoint. A month ago we deployed a report (rdl file) in SharePoint, but the person who deployed it was no longer connected with us. So we decided to deactivate it in our Active Directory. Yesterday, our users returned issues regarding they are unable to access their report. I believe the issue was "object reference not set to an instance of an object".
So I tried to download the rdl file and redeployed it but i am getting error upon deploying to SharePoint. My workaround is to delete the rdl file in SharePoint, redeploy the shared datasource and shared datasets and the rdl file. It went and was now able to run the report in SharePoint.
Is there something relation/happened when deactivating the account in AD that users unable to access the report in SharePoint?
View 2 Replies
View Related
Sep 1, 2015
i have created an report which retrieve data from table which contains a datetime field. The data of that particular field is stored in UTC time. when i navigating the report from sharepoint site i wish the datetime field will be converted into local time based on the selected timezone of the user.
View 6 Replies
View Related
Feb 1, 2007
I've been running around in circles all afternoon trying to create one simple report using Reporting Services (with latest SP2 installed) and SharePoint 2007. To the best of my knowledge, I have everything configured correctly:
When I access http://<server>/ReportServer, I see the server name of my SharePoint site.
When I click on the name of my SharePoint site, it shows me the directory structure I have created within my SharePoint Site
When I drill down in the directory, I can ultimately see the forms I created in my forms library (created via InfoPath 2007).
The next step is to create one simple report from the data in one of these forms libraries and a report on all the items within a form library. I'm stuck at the first step of creating a report, namely what to enter as the Data Source and the connection string. With a SQL database this isn't an issue.
How does one create a data source that will allow reporting over SharePoint content with the setup described above? And, if you have information that is found in the SQL Books Online, please be kind and post links so others know where to find this information.
View 5 Replies
View Related
Aug 17, 2015
issue where SSRS reports being executed from a report library in SharePoint intermittently are reloaded after hitting the apply button to run. Â We are using SSRS 2010 and SharePoint 2013 in integrated mode. So a user clicks on the report, fills in the parameters and hits apply. Maybe 70% of the time the report runs fine. Â The other 30% the report just reloads and wipes out any parameter selections. We do have a load balancer in front of the web servers.
I've ran fiddler to capture some of the error logging.
HTTP/1.1 401 Unauthorized
Cache-Control: private
Content-Length: 16
Content-Type: text/plain; charset=utf-8
SPRequestGuid: 3101219d-876e-60c8-a883-dcdee38b81b5
request-id: 3101219d-876e-60c8-a883-dcdee38b81b5
[code]....
Things we have tried. Multiple versions of IE 8,9,10,11, Firefox, Chrome. Â All browsers seem to exhibit the behavior.
We ran so more traffic monitoring and it doesn't appear on these refreshes that report actually connects to the data context so it seems to be failing prior to that. (Possibly at the SharePoint server. Logging from the server apparently didn't show much in terms of when this occurred) It doesn't seem to matter if the report has 1 or 10 parameters.Â
We did notice that when we took the load balancer out of the equation and just hit the web server directly, the refreshes "appeared" to decrease in regularity but still occur.Also, the reports do not exhibit the refresh issue when running locally within Visual Studio 2013.
View 4 Replies
View Related
Mar 6, 2015
We have SSRS reports (pointing to SQL 2012) containing cascading parameters that we have deployed on SharePoint 2013 and once a user makes a selection to the parent parameter, child parameters are getting refreshed based on the selection in the parent parameter and then we see this:
Once we hit Apply, the Loading image comes up and approximately10 seconds later, The whole webpage gets refreshed and the parameter selections get reset to default parameters.Â
This is getting frustrating because there are about 10 parameters in the report and once a user makes selections and hit apply if the page gets reset, the user has to make all the selections again.
We are working with Microsoft support on this who suggested us to increase the timeout setting of DistributedCache service on all our SharePoint servers which did seem to work initially but I do see this issue happening occasionally.
View 4 Replies
View Related
Nov 27, 2006
Setup: Windows server 2003 SP1, SQL 2005 SP2, Sharepoint Office server 2007, Report Services addin (CTP v9.00.3027).
Using the Report server configuration tool, setting Report Server Virtual directory, end up with RS Configuration tool crashing.
It appears to be happening on the task "Changing Secure connection level", & returns "System.NullReferenceException was unhandled
Message: Object reference not set to an instance of an object."
any ideas?
View 6 Replies
View Related
Mar 31, 2008
Hi,
I'm migrating SQl Server Reporting Services from 2000 to 2005.The reports are generated normally in 2000 but it seems that it is taking more time in 2005 or sometimes it does not generate the report at all.Could you kindly suggest a solution?
Thanks,
anne
View 1 Replies
View Related
Jul 9, 2007
I need help migrating sql server reporting services from one server to another.
I have reporting services database on Server A (sql 2005) and the reporting server is server B.
Now I need to move the reporting services database to new server say New_A(sql 2005) and reporting server to new server say New_B.
How can i move the reporting services so that i dont have to re-deploy the existing reports.
Is there any article which explains the step by step process to do it.
Thanks
View 4 Replies
View Related
Mar 23, 2007
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
View 5 Replies
View Related
Feb 27, 2007
Hi,
I have just installed RS and SP2 on a server running a MOSS 2007 (with SSL using an internal certificate) and configured RS to work on Sharepoint Integrated Mode. Then I went to Sharepoint to configure RS options, but when I tried to set up the Set Servers Defaults I receive the following error:
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> Server was unable to process request. ---> The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> The remote certificate is invalid according to the validation procedure.
Also, when I try to deploy a report from SQL BI Development Studio to Sharepoint, I receive the error:
A connection could not be made to the report server https://myserver.mycompany.com.br/Reports/Site. (Microsoft Report Designer)
Server was unable to process request. ---> The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> The remote certificate is invalid according to the validation procedure. (System.Web.Services)
Can anyone help me?
View 1 Replies
View Related
Jun 24, 2007
I couldn't find any tutorials/articles on integrating a SharePoint web service call with an SSIS package
I need to schedule a web service to truncate and populate SharePoint Lists (2007 & 2003) from a SQL Server 2005 table.
I guess I'm just ignorant about integrating web services with SSIS. How do I make a call to the web service through my SSIS package? (script task?)
Any links to articles/tutorials or pointers would be apreciated.
View 3 Replies
View Related
Mar 17, 2008
I am little bit scared that if i upgrade reporting server db to 2005, My report won't work. I just wanna test with some reports in SQL 2005 reporting services.
1) what should i do( I have already installed Reporting services in 2005 (64-bit)?
2) Can i backup Report server db and Report Tempdb database and restore in SQL 2005 but these database already exists in SQL 2005.?
3) If i upgrade these database , Will it effect my 2000 Production Reports?
4) i donno what to do
Please help SQL reporting experts.
View 2 Replies
View Related
Feb 7, 2008
Hello,
I have an intranet environment consists of two servers:
- An application server windows 2003 server with 64-bit server Sharepoint 2007 SP1 (Standard version for search)
- A database server windows 2003 server with 64-bit SQL Server 2005 SP2 64-bit (Standard - 9.0.3054)
It happens regularly that the database server crash (frozen black screen) while the application server indexes (crawl) the content of the intranet site based on sharepoint. There is no alert / error in the observer of events, nor in the sql logs.
The crash is uncertain: dice once all goes well, soon after that crash. When i set the parameter search service (service management research), I can define a regulatory impact of the robot to change the number of documents at the same time : "Request 2 documents at the same time, the crash is more rare, "ask 64 documents at a time, the crash is more common.
My Intranet under sharepoint is composed of a collection site with a dozen sub-sites. There are 3 large library of PDF document. All done in the 4 go in terms of volume.
My problem for about 3-4 months. (Maybe more. Before, indexing was not yet in place).
Someone could help me? Thank you
View 2 Replies
View Related
Mar 6, 2007
Up until an hour ago, I was using the Sql Server Reporting Services Report Viewer webpart in Sharepoint with forms authentication, and was not having an issue. The only thing that I did (or remember doing) before things went sour was upload a new report to the document list and since then whenever I try to access a report, manage the data source on a report, change the report URL in the webpart, I get the following message:
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="/_layouts/login.aspx?ReturnUrl=%2f_vti_bin%2fReportServer%2fReportService2006.asmx">here</a>.</h2>
</body></html>
--.
I found some related posts and have tried the following, but none have helped:
Removed all reports and reuploaded only the one that was definitely working.
I changed the application pool for the report server to be the same app pool as Sharepoint (runs under domain admin account).
I changed the application pool for the report server back to it's original (which the Reporting Services Configuration prefers - was running under Network Service acct before the problem started, now running under domain admin acct)
I can browse to http://server/reportserver.
I'm running under forms authentication, which had been working.
I can access the three configs for Reporting Services under Application Management in Central Admin - I've tried changing the settings.
I can access http://server/_vti_bin/reportserver/reportservice2006.asmx as well as http://server/_vti_bin/reportserver/reportserviceauthentication.asmx (that was suggested in one post)
I've restarted IIS numerous times, and also finally rebooted the server.
I've created a new document list and set it for report content, just like the other list.
I also just noticed that even though I've set up my admin account as a site collection administrator, I now no longer see my report options under the New button in the document library (both the old and new). I don't know if this is related.
I'm sure that this is a case of something minor that I did that I forgot about. Any suggestions or other troubleshooting that I can do?
Thanks!
daw
View 9 Replies
View Related
Dec 6, 2007
Hi all!
I'm VERY new to MOSS2007 and I have couple of questions about it and SQL Server 2005. The basic idea is to receive data from MOSS2007 into SQL Server 2005 in my own database and make some reports from there.
Which are the best practices to receive data from MOSS2007 into SQL Server 2005? Do I have to write some dlls for example with VB.NET (and use Sharepoint API calls) and use those dlls in stored procedures in SQL Server 2005? Or can I just use normal T-SQL (I believe that data in MOSS2007 is saved in lists and lists are saved in DB)?
Waiting for your replies. The more detail your answer is the more grateful I am!
Thanks!
Best Regards,
Harry F.
View 1 Replies
View Related
Dec 6, 2007
Hi all (and sorry for crossposting)!
I'm VERY new to MOSS2007 and I have couple of questions about it and SQL Server 2005. The basic idea is to receive data from MOSS2007 into SQL Server 2005 in my own database and make some reports from there.
Which are the best practices to receive data from MOSS2007 into SQL Server 2005? Do I have to write some dlls for example with VB.NET (and use Sharepoint API calls) and use those dlls in stored procedures in SQL Server 2005? Or can I just use normal T-SQL (I believe that data in MOSS2007 is saved in lists and lists are saved in DB)?
Waiting for your replies. The more detail your answer is the more grateful I am!
Thanks!
Best Regards,
Harry F.
View 1 Replies
View Related
Jan 12, 2007
I have the following setup:
Windows 2003, Sahrepoint 2007, Report Services Addin (v9.00.3033) on one machine
Windows 2003, SQL Server 2005 SP2 CTP (v9.00.3033) on another.
When I install the Report Service addin on the Sharepoint machine, the install goes fine; however, when I go to the Application Management screen in Sharepoint Central Admin I don't see a "Reporting Services" section or a "Manage integration settings" link.
Any thoguths?
Thanks,
Atul
View 12 Replies
View Related
Dec 7, 2006
Hi, iam from Mexico,
somebody has installed SQL 2005 with mirroring and sharepoint 2007?
regards.
thanks
View 9 Replies
View Related
Mar 2, 2007
I get the following error when I try to navigate to a report/model/data source, stored in a Sharepoint Document Library using a Sharepoint URL based on an Extranet or Intranet zone - but it works OK using the url for the Default zone:
System.Web.Services.Protocols.SoapException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SecurityZoneNotSupportedException: The specified path refers to a SharePoint zone that is not supported. The default zone path must be used.
Is this a limitation of the SQLRS-WSS3 integration or is there a workaround?
Many thanks to anyone who can help!
View 22 Replies
View Related
Aug 12, 2015
I have an acctest server (XX-ATS-ASSHP102) running SSRS, SQL DB Engine & SSAS. I'm trying to configure NATIVE SQL Reporting Services to use a data source with Windows Integrated mode towards a SSAS cube on the same server. When I use the servername (or 127.0.0.1) it works perfectly. But when I use the DNS name bidb.acctest.internal it fails with the error "The connection either timed out or was lost.". The profiler on SSAS says "anonymous login" so the Kerberos login is broken at some point.The weird thing is that this works perfectly in production environment, but I've missed something in the ACCTEST environment.The SPN for the serviceaccount running SSAS has correctect SPN:s:
MSOLAPSvc.3/bidb.acctest.internal
MSOLAPSvc.3/bidb.acctest.internal:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102:MSSQLSERVER
The SSRS account has delegation with "any service". No account has the "sensitive" flag.DNS names are A-records, except the hostname for the SSRS site which is a c-name, but it's identical in production.The "impersonate client after login" and "replace token" permissions are correct in the policy.The rsreportserver.config says:
   <Authentication>
      <AuthenticationTypes>
         <RSWindowsNTLM/>
      </AuthenticationTypes>
      <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
      <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
      <EnableAuthPersistence>true</EnableAuthPersistence>
   </Authentication>
both in production and in acctest env..
View 2 Replies
View Related
Jun 19, 2015
I had to migrate my report server (2008R2) to a new domain. I built new server and restored the old ReportServer and ReportServerTempDB into new server and also restored the certificate from old server. The Report Server is running but I don't have full access to all server futures anymore, looks like it's AD authentication messed up. My new account is Admin on new server but I can't see all options, like New Data Source, or wehn going on report level to manage to see all option such as Parameters, Subscriptions, Data Source.
View 2 Replies
View Related
Jan 21, 2008
Hi All,
I want to deploy my reports in a Sharepoint site. So I need to change the Deployment mode from Native to Sharepoint Integrated mode. When go to Reporting Services Configuration and in Database Setup - the Server Mode option is not visible. Anyone help me what is the reason for this or How to get Server Mode option in Database Setup in Reporting Services Configuration menu. However the system installed with Sharepoint and SSRS SP2.
Thanks in advance,
Senthil
View 4 Replies
View Related
Aug 17, 2015
I am setting up sharepoint and sql server integration environment. I am considering the following topology: PowerPivot for SharePoint 2013 and Reporting Services in SharePoint mode Two Server Deployment
[URL]
I am looking to follow the topology example by the letter, which involves installing PowerPivot for SharePoint (aka SSAS in SharePoint mode) in the same server as my SQL, and installing SSRS in SharePoint (SP) integrated mode in the same server as SharePoint.
I understand, however, that if I wanted to install SSRS in SP mode in the same server as SQL, I could but only if the server contains the SP Object Model.
My first question is, what would involve having the SP Object Model in the SQL Server?
Would only installing SP binaries be enough; or Do I need to do a minimal install of SP in the SQL server enough for it to joing the SP farm? And most importantly, what would be the licensing implications for SP in case I want proceed down this route and have SSRS in SharePoint mode installed in the same server as the SQL?
View 4 Replies
View Related
May 22, 2015
I have created a ssrs report using ssrs-2012 that contains 2 tables 2 pie charts and 1 line chart. But I am unable to see 2 pie charts and and 1 line chart after deploying the rdl in sharepoint server.
Why I am not able to see those charts, or sharepoint server will not support charts at all.
View 7 Replies
View Related
Jan 14, 2013
I Installed SQL Reporting services 2012 service with sharepoint 2013 ... and started it with success..I followed the microsoft's procedure.. URL....After , I have not encountered any problems when I created the application <--- 3 databases created in my SQLSERVER instance//The problem occured when I tried to click on my ssrs application_name --> system settings...ERROR 500 Correlation ID: f6c5f49b-6ab0-4009-6f31-fd019ddc3ecc
This what I read in the log of sharepoint -->
01/14/2013 12:18:36.22    w3wp.exe (0x0BEC)                         0x05D8   SharePoint Foundation      Â
    Monitoring                      nasq   Medium     Entering monitored scope (Request
(GET:http://vwaisql201202:22628/_admin/ReportServer/ReportingServicesSystemSettings.aspx?ID=5abbbf0d-e8dd-4e8e-93d6-eddc77225a9f)). Parent No  Â
[code]....
View 7 Replies
View Related
May 23, 2008
Hi,
I got the following exception from the code listed below:
System.Web.Services.Protocols.SoapException occurred
Message="The operation is not supported on a report server that is configured to run in SharePoint integrated mode. ---> The operation is not supported on a report server that is configured to run in SharePoint integrated mode."
Source="System.Web.Services"
Actor="http://haileizws32b:8080/ReportServer/ReportService2005.asmx"
Lang=""
Node="http://haileizws32b:8080/ReportServer/ReportService2005.asmx"
Role=""
StackTrace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.PerformancePoint.Planning.Client.Common.ReportServer.ReportingServices2005.ListChildren(String Item, Boolean Recursive) in c:Officedev14ppsplanningclientCommonReportingServices2005.cs:line 1001
at Microsoft.PerformancePoint.Planning.Client.Common.DataAgent.RetrieveDirectoryStructureFromReportingServices(Object caller, Object parameters) in c:Officedev14ppsplanningclientCommonAgentsDataAgent.cs:line 2027
InnerException:
The code is like:
ReportingServices2005 reportingServices = new ReportingServices2005();
reportingServices.Url = "http://haileizws32b:8080/ReportServer/ReportService2005.asmx";
reportingServices.Credentials = System.Net.CredentialCache.DefaultCredentials
CatalogItem[] items = reportingServices.ListChildren("/", true); <== This code throws the exception.
I can browser and view the items from both Sharepoint site and ReportServer site without problem.
Can you tell me what is wrong?
Thanks a lot!
View 3 Replies
View Related