Migration Assistant Autonumber Problems
Mar 24, 2007
I am trying to migrate an Access 2003 database to SQL Server 2005 and am having various problems:
1. On one table, the migration gives the following on an autonumber field:
A2SS0023: SQL Server Migration Assistant for Access Warning Message: Default value '0' added to target column (1), followed later on by
A2SS0028: Auto-increment attribute of the column 'MSEQ' was not converted to Identity because the column has a default value.
This table has about 80,000 records.
2. If I include another table in the migration, this one with 3.4 million records (hence our need to upgrade to SQL server 2005), I am getting a timeout error, even when I try to migrate the table by itself. I have verified that all timeout options are set to zero (unlimited time).
Any suggestions would be appreciated.
-- Larry West, MCSD, MCPD, MCTS: SQL Server 2005 [so yes, I should know the answer to this, but I don't], MOUS, FLMI, ACS
View 1 Replies
ADVERTISEMENT
Dec 24, 2007
Hi,
I am converting a schema from oracle to sql server 2005 using Sql Server Migration Assistant but for the conversion of each and every table it is asking me to connect to oracle. How can i convert this schema without again and again specifying the connection?
Thanks in advance,
Aru
View 2 Replies
View Related
Mar 18, 2008
Has anyone ever tried to use this free software to migrate an old ORACLE 8.1.7 database to SQL Server 2005? I was just wondering if there were any "gotchas" I should be aware of before hand.
Thanks,
Robert
View 1 Replies
View Related
Nov 24, 2006
I selected my source Oracle database and my target SQL Server database. I click the convert SQL button and it takes about 20 minutes to convert everything. Then what? The Migrate Data button is greyed out. I configured the linked server as is outlined in the instructions. The "Migrate Data" button is always greyed out.
I need to get this working soon so that I can convince the management team that moving to SQL Server is the way to go.
Thanks.
View 1 Replies
View Related
Jun 18, 2008
I have SQL 2000 and installed SQL 2005 Express. Had done some test migrations of
Access 2003 to SQL2000 using the tool for that. Upgraded that migration assistant to
SQL 2005 (my mistake) and now I have 2 instances of SQL2005 running (according to
surface area configuration) and even the server mgr for SQL2000 can see those instances..
but SSMA 2005 refuses to see them.. My migration test project is dead in the water..
Can I get a copy of SSMA for SQL2000 back?..Anybody?..
Thanks..
View 2 Replies
View Related
Sep 29, 2007
i am transfering an Oracle 10g database to SQL Server 2005. i have 2 pcs one with SQL Server 2005 with SSMA For Oracle Extension 3.1 installed, also with Oracle 10g client configured to connect the Oracle database in another pc. the other pc has Oracle 10g database server installed with SSMA For Oracle 3.1. whenever i try to migrate the data there is an exception which says
"Errors: SQL Server cannot access the source table"
i dont understand why its there. i hav successfully converted the schema and loaded them in SQL Server. can anybody tell me a soltuion asap.
S ]-[ /- | ]-[ /- N
View 1 Replies
View Related
Feb 15, 2008
I can connect to my Oracle database and I can connect to my SQL Server database. But the "Convert Schema" button stays disabled. What am I doing wrong? Anyone have experience using this tool?
View 4 Replies
View Related
Oct 6, 2006
I'm trying to make the business case to move our business databases to SQL Server 2005 from Oracle 9i. The SQL Server Migration Assistant for Oracle will be absolutely necessary for this to happen. However, I am unable to launch the assistant. It tells me I have an old version of java installed - but I don't. It is a new XP machine and I downloaded and installed j2sdk-1_4_2_12-windows-i586-p.exe which did not help (I rebooted). Why does it think I have an old version and how can I get this assistant working.
Any help would be much appreciated.
View 4 Replies
View Related
Aug 6, 2007
I've installed SQL 2005 Express Addition which created a default database using Windows Authentication -- MachineName/SQLEXPRES. I want to convert some access databases to sql server in the migration assistant, however, when I try to connect the migration assistant to the default database I can't find the database in the drop down box wizard? I'm perplexed? Please shed some light or point me to some articles that will help. Thanks.
View 5 Replies
View Related
Sep 23, 2007
I attempted to use SSMA to migrate a 2000 file format .mdb into SQL Server Express (and, as I've just purchased VS2005 Pro, into SQL Server Developer Edition).
The file is actually a backend, so nothing to migrate other than tables.
After several runs during which I received (and fixed up) some errors, the process runs smoothly with no errors or warnings, until it comes to the last step; migrating the data itself.
Data migration into 'parent' tables works fine. However, wherever I have data in a table with a foreign key relationship to any of the aforementioned 'parent' tables, it refuses to migrate it. The text of the error message will be very smiliar to the following (from the log):
[Datamigrator: Error] [464/7] [2007-09-23 14:18:54]: Exception: The INSERT statement conflicted with the FOREIGN KEY constraint "Branch$CompanyBranch". The conflict occurred in database "DPMTest", table "dbo.Company", column 'CompanyID'.
There is nothing wrong, so far as I can determine, with the relationships involved.
I can insert data into the tables using any of the following methods:
1. Directly in Access, in the source backend.
2. Using the original Access frontend application, attached to the source backend.
3. Using VB.Net forms I am developing, in the 'upsized' database.
4. Directly in the Management Studio, in the 'upsized' database.
None of these four methods complains in the least about the relationships which SSMA balks at.
I would be grateful for any ideas....thanks.
View 3 Replies
View Related
Dec 6, 2006
Hi all,
I downloaded the Microsoft SQL Server Migration Assistant for Access 4 weeks ago. Today, I tried this program for the first time. I added one Database with 3 Access 2003 Tables to the Access Metadata Explorer. I right clicked Databaes on the Access Metadata pane and did not see the "Convert Schema" highlighted!!!??? What is wrong with the program? How can I make it highlighted? Please help and advise.
Thanks in advance,
Scott Chang
View 8 Replies
View Related
Oct 17, 2001
Hello everybody. I want to use Web Assistant with option "..data Change"
so Web assitant will create trigger.
The database generated from Erwin 3.5.2 and use triggers for integrity.
When I run Web assistant wizard I am getting message ".. can't create trigger becouse existing trigger created with encryption option
sp_helptext tI_prcode (my insert trigger) shows all code in the trigger
where shoild i look to disable encryption option
I found way around this problem
A.Save and delete existing trigger
B.run Web assistant trigger will created
C. Save and delete web assiatnt trigger
d. Insert code from web assitant trigger into code from original erwin
trigger and recreate it
Is any other ideas ?
Thanks a lot
Alex
View 2 Replies
View Related
Oct 25, 2005
Where do I go to modify the T-SQL statement I entered while creating a job with the web assistant wizard?
View 1 Replies
View Related
Jan 28, 2004
Hi,
i have a few web jobs, that were set up by the DBA that worked here before I did and they have just stopped running and I have no idea why.
The error I get is:
Executed as user: dbo. SQL Web Assistant: Could not establish a local connection to SQL Server. [SQLSTATE 42000] (Error 16804)
Does anyone have any experience with this?
Thanks in advance
View 6 Replies
View Related
Dec 5, 2006
We Upgraded our SQL Server 7.0 to 2005 - executed Script web.sql to create tables and procedures and now we want to execute a webtask.
But it raises the error 16820 "SQL Web Assistant faild because the state of the webtask in msdb..mswebtask is invalid"
How can i fix this
Its Urgent
thanks for your help
HANNES
View 1 Replies
View Related
Jul 27, 2007
I am currently with sql 2k5 and using web assistant to generate some HTML files and email the same automatically to a set of users.
these html files that are generated are processed via a JOB in sql server.
I am in process of replacing of the web assistant procedures.
Is this possible to make this with XQuery of SQL Server 2K5 and convert it into HTML files with Stored Procedure.
Is there any other possible way to do it?
View 1 Replies
View Related
Sep 14, 2000
I used SQL Server's web assistant wizard to create a
web assistant job. In this job I chosed "When SQL
Server Data Changes" for schedule options. Late, I
don't want this job and by right click web assistant
job I deleted this job.
However, I have a stored procedure which use the same
table with the above deleted web assistant job. Normally,
the stored procedure runs only 1 minute. Today it runs
more than 5 minute and then failed. Here is the error
messages:
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++
Server: Msg 16882, Level 11, State 1, Line 0
SQL Web Assistant: Web task not found. Verify the name
of the task for possible errors.
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++
Please somebody can tell me how can I solve this problem
(or totally delete the above web assistant job).
Thanks.
View 2 Replies
View Related
Jul 20, 2005
HiI've created a stored procedure (see below) which accesses the ActiveDirectory and SQL server to get "real names" back. When I run thestored procedure in Query Analyzer it returns the expected results,however when I try to create a Web Assistant job based upon theprocedure I get the SQL-DMO message:Error 7410 Remote Access not allowed for Windows NT Useractivated bySETUSER.The procedure is being run (and the job created) as the account whichowns the SQL Server installation, and this account has AD adminpermissions.Any suggestions?CREATE VIEW dbo.vw_account_adASSELECT a.Name AS ad_name, dbo.Accounts.*FROM dbo.Accounts INNER JOINOPENQUERY(ADSI,'select SamAccountName, Name FROM''LDAP://w2k-bspad1/ ou=users,ou=bsp,DC=ad,DC=bl,DC=uk'' whereobjectcategory=''person'' ') a ONSUBSTRING(dbo.Accounts.Account_Name,CHARINDEX('', dbo.Accounts.Account_Name) + 1,LEN(dbo.Accounts.Account_Name) - CHARINDEX('',dbo.Accounts.Account_Name)) = a.SamAccountNameCREATE PROCEDURE [dbo].[usp_event_report] ASSET ANSI_NULLS ONSET ANSI_WARNINGS ONSELECT Code_Name, Account_Name + ' ('+ad_Name+')' as 'Account Name',Date_Occured, ResultFROM Usage_Codes, Usage, vw_account_adWHERE Usage.Code_ID = Usage_Codes.Code_IDAND Usage.Account_ID = vw_account_ad.Account_IDAND datepart(month,Date_Occured) = datepart(month,getdate())ORDER BY Code_Name, Account_Name, Date_OccuredGOChloe CrowderThe British Library
View 2 Replies
View Related
Feb 4, 2002
I've a merge rep running with 4 subscribers for a while. Now I
wanted to add another subscriber and when I open the publisher
in the pull subscription assistant dialog, there are no publications
in it. (even not if i switch to "allow anonymous sub") But every-
thing seems to be alright wirh the publication itself! It even doesn't
work to select the publication in a pull subs. from an other db on the
same server! Any ideas?
Any help will be greatly appreciated!!!
View 2 Replies
View Related
Nov 3, 2015
I set up a connection file in order to move data from sql to csv files. I should be at the last step, the data flow. but:I don't see any flat file in my destination assistant.
View 23 Replies
View Related
Apr 23, 2001
Is there a way to create a(unique id) that will automatically populate similar to ACCESS?
View 1 Replies
View Related
Oct 13, 1998
I am new to SQL Server coming from Access.
In the work I do, I use the Autonumber data type often.
I don`t seem to see this SQL Server.
Can you tell me if this can be done?
jstravato@ccri.cc.ri.us
View 1 Replies
View Related
Aug 3, 2001
Is there somthing in SQL Server similar to the AutoNumber feature in access that could just add a new key + 1 of the last when you add a new entry?
View 1 Replies
View Related
Jan 18, 2004
sql 2000
how can i set primary key to autonumber?
i created a form with this table,, i get error when trying to insert..
i want "id: column to autogenerate number
.................................................. .....................................
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot insert the value NULL into column 'id', table 'Guestbook.dbo.guestbook'; column does not allow nulls. INSERT fails.
View 4 Replies
View Related
Mar 21, 2006
Hi
When we open the table in design view in access , we get to see the Data type as Autonumber there.
How to find out the same in SQL Server , if a particualar column fas been made autonumber & how to make it also .
Thanks
Bharat Butani
View 3 Replies
View Related
Apr 25, 2007
create table tblCasCodeDef(
CasCodeDefID int not null,
CasCodeDef char(100),
CasDescription char(200),
EngineeringFunction char(100),
Primary Key (CasCodeDefID));
In this code, how can I make my CasCodeDefID as autonumber?
===============
JSC0624
===============
View 2 Replies
View Related
May 7, 2007
I have my id column set to automatically provide and id number, I am wondering if it will be ever be posible that it will give me the value ZERO 0.
( I want to use the lack of the 0 id, as a way to detect that there is need of a new record in a client application)
View 2 Replies
View Related
Oct 11, 2005
Hi,I am always confused about what to use as the key for a table.Let's say I have a company-employee table.[company]---*[employee]My co-worker likes to use an AutoNumber or Counter as the key for the[employee] table (and everything).I personally use an actual key set for the [employee] table.So, his table will have one (Autonumber or LONG) column as the key. Thecompany_id is just another attribute.Mine, on the other hand, has 2 columns as the key. (i.e.) company_id +employee_idSo, what is the deal?--[color=blue]> There is no answer.> There has not been an answer.> There will not be an answer.> That IS the answer!> And I am screwed.> Deadline was due yesterday.>> There is no point to life.> THAT IS THE POINT.> And we are screwed.> We will run out of oil soon.[/color]
View 22 Replies
View Related
Feb 1, 2008
I am working with a database that was created in Lotus and importingit into Access. There are hundreds of clients in this data base thathave to be kept and maintained. My question is: Will auto numberingwork with this imported file and will it continue with the last numberthat is in there and if not can I make it work and how?
View 2 Replies
View Related
Jul 20, 2005
Sorry for my bad English but I'm Italian...I have a question for you...I delete all record of table but I don't set autonumber field to start withvalue 1....What do you do to set a values of autonumber colomns with Query Analizer orEnterprise Manager...???
View 4 Replies
View Related
Jul 20, 2005
HiPlease help me URGENTHow do i make an tableField with aAuto-Incr, the same like in an access DB where it'scalled AutoNumberThanx in advance__________________________________________________ ________________ FlemmingPaulsen ICQ#: 270065050 Current ICQ status: + More ways to contact me__________________________________________________ ________________
View 1 Replies
View Related
Jul 20, 2005
What is the equivelant to Autonumber coming from an Access World toSQL?TIAMichael
View 8 Replies
View Related
Nov 13, 2006
The problem is to set the right type for "Question_number"/"test_str"I have tried Integer & String (Long Integer din't work....)
The field: Question_number is autonumber dim test_str as Integerdim besvart_str as string
answer_str = "Yes" Date_now = nowtest_str = 187 Dim StrSQL_2 as String = "UPDATE q_a_table" & _ " SET answer = '" & answer_str & "' WHERE [q_a_table].Question_number= '" & test_str & "'"
Larsoslo
View 1 Replies
View Related
