Migration from MsAccess to Sql-Server.
Problem:
Ing_ID = nz(me.Ing_AutoNr,0)
me.openform "MyForm",,,"ID = " & Ing_ID
This work in MsAccess with new records but this doesn't work in Sql-Server. How can I solve this?
Hi ,
I have a requirement to migrate the data from an existing MS Access database to a newly designed SQL Express 2005 database . Need less to say the table structures in both are totally different.I would like to know how can i handle a scenerio where i want to map table A in access to table B in SQL express (the schema of both different and the number of columns can vary too) , how do i migrate the data from table A in Access to Table B in SQL express using SSMA?
Also i would appreciate if some one can tell me is SSMA the right tool for this , or should i use the upsizing wizard of MS Access. The constraint here is that the data needs to be migrated to a completely new schema. I just need to migrate data only and no other objects.
Thanks
Mahesh
I'm using MSAccess 2k as a front end to a SQL Server 2k database.
I have a user set up in SQL Server to be database owner for a specific database.
Using NT authentication.
Using ADO.
The MSAccess application executes a store procedure on the SQL Server that (1) deletes a tables if it exists, (2) creates and populates a table (the owner shows up in Enterprise Manager as the user name) and then (3) uses the table (read) in a join to do some other processing.
The (1) delete works fine.
The (2) table is created and populated fine.
On (3) the Select (inner join) to do the aditional processing I get an error message that the table name used is an invalid object.
Workaround.
If I create the table as sa separately and in the store procedure, instead of deleting, creating and populating the table I merely truncate the table and then repopulate it, everything works fine.
I would prefer to not have the table sitting around the database all the time.
Anyway, I'd like to figure out why the table is causing a problem.
Any ideas?
Thanks.
Hi,
I am getting below error when exporting data from SQL Server 2005 to MS Access.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (1706) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Its direct mapping from OLE DB Source (SQL Server 2005) to OLE DB Dest (MS-Access Database)
Help from anyone. Plz its urgent.
Regards,
hi,
I have MS Access Database (test.mdb), and i have a table called tblEmployee in that.
How to query the table from SQL Server Query Analyser?
Thanks in advance
qAnand
Hi,
I Need to make a script or task that programmatically export data from SQL Server to Access File , and how to call the script from the .NET?
I need to switch from MS Access to SQL Server for my database. To set
up a development environment I downloaded the free Microsoft SQL Server
Express (February CTP version). I installed the required .NET Framework
v2, and then SQLExpress. The install was done using all the defaults,
and was done successfully. I also downloaded and installed the SQL
Express Manager Tool.
The SQL Server was installed on the same machine as my VS.NET
development environment. The SQL Server process is now running, and I
can connect to the server using the SQL Express Manager Tool. This
allows me to view and query the sample databases, but not much else.
To convert my Access .MDB database to SQL Server, I am trying to use
the MS Access Upsizing Wizard. The version of Access I am using is
Access 2002 on a Windows XP-Professional system. The problem is that
Access cannot get a connection to the SQL Server. I tried using the
default server name "(local)" and "Use Trusted Connection", but I
receive the following error:
Connection failed:
SQLState: '01000'
SQL Server Error: 2
[Microsoft][ODBC SQL Server Driver[]Shared Memory]ConnectionOpen (Connect()).
Connection failed:
SQLState: '08001'
SQL Server Error: 17
[Microsoft][ODBC SQL Server Driver[]Shared Memory]SQL Server does not exist or access denied.
Curiously, I get this exact same error message even if the SQL service
is stopped. So I'm pretty sure the problem is that it is not finding
the SQL server, and not a security issue.
In order to connect to the SQL server using the SQL Server Manager
Tool, you have to provide the actual instance name for the server
"COMPNAMESQLExpress". So I tried using this server name in the Access
Upsizing Wizard, but this returns the same error message as above
except the first SQL Server Error is 53. I also tried using a Login ID
and password (using the Windows administrator ID and password, and also
the "sa" ID and password) to no avail.
I am at wits end, and can't figure out why Access can't find the SQL Server. Any ideas would be appreciated.
Thanks.
hi,
i export datas from sql server 2000 to Ms Access. but few tables only not expot. and error has come "the microsoft jet data base engine cannot find the input or Query "<t.n>" make sure it exists and that its name is spelled correctly.
but tables are live in sql server 2000.
Please give solution as soon
Hi,
I have a msaccess linked server that I use to execute sql 2000 stored procedures from a front end in adp (access data project) format without any problem, if it is used on the same machine where the sql server resides (with any user logged on). In any other machine on the local network where I also need to use it, I get an ole/db error message saying that the microsoft jet database engine can not open the file because it's allready opened exclusivly or because it do not has permissions. I created the linked server with both UNC and normal path with the same result.
Thank's for all the help/clues you can give me.
Hi All,
How can I link a view into MS Access from MS Sql Server, that I can update as a tabble.
Thanks
Laszlo
Hi all,is there any tool which is capable to convert query initially written formsaccess database to query for mssql server.I have tons of queries which contains iif, trim and similar functions whichshould be converted to case, ltrim(rtrim(, etc. etc.Does anyone know for tool which could do that automatically?Thanks in advance,Anabella
View 1 Replies View Related
Hi
I have a linked server to MSAccess DB and, when I try to select record from a table that have a column
with a bad date formatted (with year less than 1753) I receive the message:
.... conversion error from DBTYPE_DBTIMESTAMP to datetime....
My scope is set to NULL this bad values from Sql Server ...
I first try with something like
UPDATE LNK_SVR...TABLE SET FLD=NULL WHERE ISDATE(FLD)=0
But I receive the same error... perheaps the provider generate the error before an Sql Server evaluation ...
So I think to a passthrought query:
exec sp_serveroption @server='LNK_SVR',@optname='rpc out',@optvalue='true'
exec LNK_SVR...sp_executesql 'update table set FLD=NULL WHERE YEAR(FLD)<1753'
But I receive the folowing message ....
Messaggio 7213, livello 16, stato 1, riga 1
Il provider non è riuscito a passare parametri di stored procedure remota al server remoto 'LNK_SVR. Verificare che il numero, l'ordine e il valore dei parametri passati siano corretti.
Any suggestion is appreciate.
Thanks in advance
Matteo
Mds
Can any body tell me the step by step procedure of porting MSACCESS tables into
SQL SERVER
thanks in advance
Rakesh
Hi!!
I´m having a problem setting up a job in sql.
When i run my DTS is on succed but when I schedule the job --failed
Is connecting a sql serve db with msaccess you.
Sombody know? if i have to consider something??
I would like to pull some data from a SQLServer database, and save it into an Access MDB file (which can be empty to start). I would then zip up the MDB and download it to the user.
I am seeking advice on the most "elegant" or "efficient" way to do this. Here are some ideas I have been considering:
1) Should I start with an empty template MDB and file-copy it before I populate it? Or is there a neat way in ASP.NET to allocate a brand new MDB outright?
2) I could read the SQLServer data into a Dataset object. I could then open a connection to the MDB, create a table object, defining all the columns, etc., and then I could write the data to the new table object. BUT ... I have a hunch there is a nifty ADO.NET way to save the data already in the Dataset object right into the MDB (creating the table and columns as a matter of course) ... all with an instruction or two (or three). Any ideas?
Thanks in advance!
Hi there,
We have a MSSQL 2000 db, with several MSAccess 2000 adp interfaces connected to it.
Several bit data type fields of the tables are updated through those interfaces, but from time to time (I can find no pattern when it happens), flagged fields (i.e. with value 1) are unflagged (they get value 0), without any user interaction on that field (neither in the tables, neither through the checkboxes).
Anybody familiar with this issue?
The following works fine in Access:
SELECT Hist_POS.POSITION_CLASS_CODE, First(Hist_POS.POSITION_TITLE) AS FirstOfPOSITION_TITLE INTO [Manhour Positions]
FROM Hist_POS
GROUP BY Hist_POS.POSITION_CLASS_CODE
ORDER BY Hist_POS.POSITION_CLASS_CODE;
But not SQLServer because of First(). How can I achieve the same results in SQLServer?
Thanks
I am having issues with MSAccess and MS SQL for a new client. It worked in the past, but I cannot talk to the old computer guy?!# Here's the scoop. It uses an Access front end and ODBC to conect to the MS SQL 7.0 server. In the office they use a system DSN named DATA to connect using NT authentication. I've got the firewall configured for the two employees static ip addresses to goto the MS SQL server. On the remote machines, I have added a system DNS named DATA as well that uses MS SQL authentication. I setup the remote user accounts on the MS SQL server. Now heres the problem. I can test the ODBC from the remote omputer and it works.At first I could not get into teh database at all. I went in and updated the Access file connection strings to include a username and password. Now I can get into the Access front end and access the main page. (IT has a couple of buttons - Shpping, Inventory, Management, etc.) I can even click on these buttons and pull up the next page. (For example I can click on the management button and pull up a list of new buttons- one of which is Auto Exec Bob) NOw when I click autoexec bob or any of the others it takes a while and then give me an error. (SQLState 28000 MS SQL error: 18452 Login failed for user null. Reason: Not associated with a trusted SQL Server Connection.) If I click ok then I have a box that lets me uncheck the use trusted connection and sign in using my remote username and pass that I setup. Eventually I can access everything - one step at a time.Each time it tries to connect to the database it takes about thirty seconds to time out, then gives me this error message and I can log on again. Any help to sort this out would be greatly appreciated. Thanks in advance.
View 1 Replies View RelatedHitaishi writes "We have recently migrated from MSAccess as our back end system to SQL Express, but the dialogs showing records of the table which were taking lesser time in Access are taking more time in opening and doing any database operations.......
We are using .Net Framework 2.0. Does it have anything to do with lowering down the performance ?
Any help would be appreciated."
I am trying to use SQLServer for the first time and I am trying to use the upsizing wizard on Access to get moved over to SQLServer. I am getting the following error messages:
Connection failed:
SQLState: '01000'
SQL Server Error: 2
[Microsoft][ODBC SQL Server][Shared Memory]ConnectionOpen (Connect()).
Connection failed:
SQLState: '08001'
SQLServer Error: 17
[Microsoft][ODBC SQL Server][Shared Memory]SQL Server does not exist or access denied.
Does anyone know how I should proceed? ( I am new at this so please be gentle.) Any help would be appreciated.
Thanks
im in the begginging stages of converting an access 2003 backend to SQL 2003sp3.
The access's upgrade wizzard did an ok job getting most of the tables ported over. Now when the frontend relinked the tables to SQL server im assuming i just continue on using them as is. When the wizzard wanted a connection to use i created a new connection and saved it on the server. Im assuming this connection object is what access is using to get to SQL.
Am i assuming correctly ?
The reason i ask is only a few of the linked tables in to sql seem to be editable. some are read only ? (i have primary keys in all my tables.) im just calling a query bound to the linked tables.
Secondly, But could be related.
Now this problem i dont understand. On open of my main form i log who and what pc they are using. in this situation i open a record set, log the data and close it. At first the error was i needed to add dbSeeChanges on my object, ok so i added it as an option.
But i now get an the error message: at rsTran.AddNew "Run Time error: 3027 , Can Not update. Database or Object is read Only ?
here is the code
Set db = CurrentDb
Set rsTran = db.OpenRecordset("tblUserLog", dbOpenDynaset, dbSeeChanges)
struser = Currentuser
strNetwork = atCNames(1)
strPC = atCNames(2)
rsTran.AddNew
rsTran("UserName") = struser
rsTran("MachineName") = strPC
rsTran("EmployeeNum") = strNetwork
rsTran("Notes") = "User Logon"
rsTran.Update
Set db = Nothing
Set rsTran = Nothing
thank for any advice.
jon
We have plan to migrate our database from Access to SqlCe.
Here our situation:
We will never use a Pocket PC applications, only Windows desktop application.
We want to migrate the .mdb file to a .sdf file (I've seen the ADS application, but since we don't use mobile devices, it's no use)
The .sdf will be use on local client machine only.
Here's my problems:
I've use a conversion to migrate from access (http://www.primeworks-mobile.com/Downloads/DPW.html) and seem to work fine.
I updated the source code to use the SqlServerCe dll instead of OleDB.
Some of my queries work fine, but others just won't work in VS2005 using C#.
To check if the query is really wrong, I take exactly the same query and put it Query Builder from the Server Explorer in VS2005.
And the query just work fines!!! It's bring back all the records asked for, and I've got an error for the same query from my source code.
I'm using a datatable, here's the code used for filling the DataTable. I've got an error on the line adapter.FillSchema()
string connectionString = @"Data Source=" + fic_parent.CheminFichierComplet;
using (SqlCeConnection connection = new SqlCeConnection(connectionString))
{
SqlCeDataAdapter adapter = new SqlCeDataAdapter();
connection.Open();
SqlCeCommand command = new SqlCeCommand(requete, connection);
command.CommandType = CommandType.TableDirect;
adapter.SelectCommand = command;
tableResultats = new DataTable();
adapter.FillSchema(tableResultats, SchemaType.Source);
adapter.Fill(tableResultats);
// Close connection
connection.Close();
}
Error is:
Message="The specified table does not exist. [ (...) ]"
Source="SQL Server 2005 Everywhere Edition ADO.NET Data Provider"
HResult=-2147217865
NativeError=0
Here my questions:
Is it possible to have an application that will convert my Access databases to an SSCe .sdf file ?
Why I can query in Server Explorer and can't in my source code using the same sql statement ?
At which level my code isn't good, because I just replace all OleDB* --> SqlCe* in my code.
I hope that I explain clearly my problem, do not hesitate to ask me questions about this problem.
How run SSIS package from MsAccess?
View 3 Replies View RelatedI have a Access 2002 (saved as 2K format) front end to a SQL Server (2000 I believe) and everything worked fine until I added 30 new fields to the main table. All of these fields are data type Bit and all are initialized to zero. I can add new records without any issues. The problem is that any time I try to update or delete a record I get the dreaded "Write Conflict..." msg in Access. If I use an older version of the system without refreshing the linked tables I have no problems. This behavior is also exhibited if I try to update/delete a record directly in the table so I know it is not something in my forms. Any help would be greatly appreciated.
Ron
HI all,
Could any one pls suggest me how to migrate from DB2 to SQL SERVER 7.0
Thank you all..
---Chow
hi,
We have machine where SQL 2005 server is installed.Atleast 3 web applications are running on it with data size 22GB in all. We need to migrate all data/tables/groups/users from this server to another server.On target server, SQL server 2005 will be installed.After that this migration activity needs to be carried out.what are options available to migrate to target server?
Microsoft migration tool? Any already existing stored procedure etc?which is preferred solution in such case?
Thanks for help
PD
Hi All,
Greetings,
We have
sql server 7
Sqlserver ServicePack SP3
Sort Order = 32
BuildNumber 7.00.961
on Windows NT,Now we are planning to upgrade operating system from win NT machine to windows 2000.
Please let me know what and all precausion do i need to take what and what all backup should be done apart from user database.
How do i take care of the users,logins,roles, DTS Job and Replication.
Please help me in this and also any links if u have on this topic
Waiting for reply
TIA
Adil
Hello All,
Soon I shall have to migrate 2 medium sized databases from SQL server 7 to 2005.
Any words of wisdom, “how to�, “do and don’t� would be greatly appreciated.
Here are the details:
SQL 7.0 SP4, on Win2000
SQL 2005SP1,on Win2003
Sql 2005 needs to be installed on a new server (Win 2003), which will also be used as a web server (IIS6). I was thinking to go with a clean install for sql 2005 first, and after that to migrate the databases.
Thank you in advance,
Emily
Hi all,
I have script written in SQL Server 2000.
When i tried to migrate to SQL Server 2005, it is working fine in the SQL Server 2005 installed in Windows 2003 Server. System tables(syscolumns, sysobjects etc)are created in "Database->Tables->SystemTable".
But when i tried to run in SQL Server 2005 installed in Windows XP, I'm facing the following problems.
1."The object 'CK_SavedSear_LastL_4B422AD5' is dependent on column'LastLoadedTime'
"ALTER TABLE DROP COLUMN LastLoadedTime failed because one or more objects access this column"
2.Moreover none of the tables had been created in "Database->Tables->SystemTable".
In both XP and 2003 Server, While installing, i have choosen same options.
Please anybody could help me to resolve this issue.
Thanks and Regards,
Nilavu
I'm migrating 15 user databases from one server to another. The current production server is Windows 2000 Server SP4 and SQL Server 2000 Standard Edition SP4. The new production server is Windows 2003 Server and SQL Server 2000 Enterprise Edition SP4. The new server does not have the same directory structure as the current server.
I plan to detach the database, move the .mdb and .ldb files to the new server and then attach the database again. I'm not sure what to do with the master and msdb databases. Do I need to bring over the master? I know I need the msdb for all the job information. Since these are system databases, do I need to follow a different process? I want to get all these databases over to the new server so I can begin some parallel testing prior to the final cutover.
For anyone that has gone through this process, is there anything that I need to pay special attention to? Any issues moving from Windows 2000 to Windows 2003 or SQL Server 2000 Standard to SQL Server Enterprise Edition?
Any assistance would be GREAT!!!
Hi all,
I have script written in SQL Server 2000.
When i tried to migrate to SQL Server 2005, it is working fine in the SQL Server 2005 installed in Windows 2003 Server. System tables(syscolumns, sysobjects etc)are created in "Database->Tables->SystemTable".
But when i tried to run in SQL Server 2005 installed in Windows XP, I'm facing the following problems.
1."The object 'CK_SavedSear_LastL_4B422AD5' is dependent on column'LastLoadedTime'
"ALTER TABLE DROP COLUMN LastLoadedTime failed because one or more objects access this column"
2.Moreover none of the tables had been created in "Database->Tables->SystemTable".
In both XP and 2003 Server, While installing, i have choosen same options.
Please anybody could help me to resolve this issue.
Thanks and Regards,
Nilavu
Scenario
Recently moved a SQL2000 database to SQL2005.
Collation on SQL 2000 database server was SQL_Latin1_General_CP1_CI_AS
Colaltion on SQL 2005 database server is Latin1_General_CI_AS
After restoring the SQL 2000 database on SQL 2005 we observed that the database collation was SQL_Latin1_General_CP1_CI_AS. We have altered the database collation to Latin1_General_CI_AS. We understand this will work for all new objects created on the database but existing objects (prior to the collation change) will continue to have the 'SQL_Latin1_General_CP1_CI_AS' collation.
What is the best method to change the collation of the older columns to 'Latin1_General_CI_AS' -
1) Run ALTER TABLE ALTER COLUMN <colname> <datatype> COLLATE Latin1_General_CI_AS <nullability>
on each varchar/char column
or
2) For each table
BCP out data
DROP TABLE
RECREATE TABLE (taking the new collation Latin1_General_CI_AS)
BCP in data
3) Other methods?
Thanks in advance
David.
hi, i need some help here,i made a simple data driven website in my development PC, at first, i used MS Access for my data base then i migrate it to sql server express 2005, and it works fine when i try to run it in my development PC with my IIS. but of course i will be deploying it to a real server, in our office were i will deploy my data driven site, we have a PC server Win Server 2003 with SQL Server 2000 Enterprise (im not pretty sure by the name but i know its not a free version, its something like a 2000 sql version with a word enterprise at the end).so my question is, i am developing an ASPdotNET site originally used SQL server 2005 express,how can i migrate my site to the Win Server 2003 and my database from SQL Server 2005 express to SQL server 2000 enterprisewill it work?? if not, what are the possible solution that i can do in cases like mine?i used Visual Web Developer 2008 Express Ed. in making my sites, and its DOES NOT allow databases in SQL Server 2000!!!!!it says "can't recognize the database"i hope you can help me with this.Thanks-SALAMAT PO....=)
View 1 Replies View Related