Minimun SP Level For Cluster Upgrade
May 31, 2007I'm upgrading MSSQL2000 (RTM) cluster to 2005. I haven't seen any information regarding a minimum service pack level for 2000. This upgrade just makes me overly caution.
View 4 Replies
ADVERTISEMENT
Setup And Upgrade :: Cluster Installation Failed On Adding Node To Cluster
Oct 10, 2015During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
Setup And Upgrade :: Can Build Cluster By Adding Cluster Service
Jul 6, 2015Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedSQL 6.5 Cluster Upgrade To SQL Server 7.0 Cluster
Jul 17, 2000I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
How To Upgrade SQL Server 2000 Cluster To SQL Server 2005 Cluster(Database)
May 8, 2007Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
Upgrade Compatibility Level Setting
Jun 14, 2000Hi All,
We were upgraded our databases from 6.5 to 7.0 .After upgrading
the Compatibility level was 65 .We changed to 70 for all databases using sp_dbcmptlevel system stored proc.We were having some problems with Ansi nulls if the compatablity level is 70,We changed back to 65 that works fine--OK with ANSI NULLS.While Upgading ANSI NULLS OFF after upgrading ANSI NULLS OFF.But from the front end side ODBC settings ANSI NULLS are ON.Is that some thing to do with compatablity level or with ANSI NULLS .
If you guys have any great ideas Please let me know.
Thanks A Lot,
VJ
Does In-place Upgrade Set Compatibility Level To 9.0
Jun 19, 2007This may be very obvious and when I get to the first test server I will find out, but I only have a new installation of SQL2K5 so far to test with. I have several databases that need to be upgraded to run on 2K5, but the application requires them to run in 8.0 compatibility. Does this mean that an in-place upgrade is not an option?
I apologize if this is a silly question, but I have not yet found the answer specifically.
Thanks very much.
SQL 2005 Upgrade With Compatibility Level 80
Nov 30, 2007Hi All,
We have upgraded our database from SQL 2000 to SQL 2005 keeping the compatibility level 80.
Now the question is -
Would microsoft support compatibility level 80 in SQL Server 2005 even after the extended support date for SQL Server 2000?
OR
If Microsoft dropped the support for SQL 2000, then would Microsoft support compatibility level 80 in SQL Server 2005?
Thanks
Upgrade Advisor For Compatability Level.
Jan 23, 2008Is there any way to run upgrade advisor against a database the is on a sql 2005 server but set to 80 compatability level?
Or is there another tool to do this?
Minimun Installation
Aug 23, 2006I need to reduce de installation pack of sql server express 2005. howcan i do that?thanks.
View 10 Replies View RelatedCluster Upgrade SP2 2005
May 11, 2007Have recently performed an in-place upgrade of a 2 instance sql cluster from 2000 to 2005. The upgrade process went relatively smoothly. However, I am running into problems installed sp2. The first problem that I run into is that I have resrcmon.exe locked. I can click next, which is fine, but once I get past that point I get stuck during the installation process. I am updating DatabaseServices and Integration Services. It gets stuck on 'Awaiting first complete passive cluster node SQL-Test'. Does anyone have any ideas?
Thanks,
Tim
Upgrade 2node Cluster
Oct 4, 2006Hi There
I have upgraded many standalone sql server instances however never a cluster.
I have an active active 2 node cluster. Each running an instance of Sql Serevr , 1 default and the other a named instance.
All i can find in BOL is "How to: Upgrade to a SQL Server 2005 Failover Cluster (Setup) ", however this does not tell you how to upgrade and existing cluster.
Is there anything different ?
Will the upgrade detect the cluster and upgrade binary files on both nodes automatically etc? In other words is there anything different i have to be aware of when upgrading sql server instances cluster?
Thanx
No Compatibilty Level 90 Option After Upgrade From SQL 2000 To 2005
Jul 28, 2006I did an in place upgrade of my SQL 2000 server to SQL 2005.
Now all the system and user databases are set to compatibilty mode 80 and in the options tab there is no compatibilty mode 90 option.
How can I set the databasbes to compatibility mode 90?
Thanks!
Upgrade SQL 2000 To 2005 Cluster
Sep 17, 2007Good Morning!
I am beginning the process of moving SQL 2000 databases to SQL 2005 cluster.
Has anyone already did this and is there anything I should know?
We plan on leaving the SQL 2000 database up during this process and granting read only at the time.
I am nervous about this as this is a high profile database in our dept.
I don't even know if I know where to begin!
Any suggestions are truely welcome!
Thanks,
/P
SQL Server 2000 Cluster Upgrade
Apr 2, 2008We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2003 Server 32 - bit Standard to a SQL Server 2005 Cluster running on Windows Server 2003 64-bit Enterprise. Our existent cluster's databases are residing on SAN. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2003 32-bit Server to Windows 2003 64-bit Enterprise Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers. Or should we just evict the passive node?
2. Install a fresh copy of windows 2003 64-bit server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2003 32-bit Server and SQL Server 2000 serving our customers.
3. Bring the active server down.
4. Create new cluster on the newly upgraded server and assign the same cluster name and IP as the original one.
5 Bring the luns from SAN to the newly upgraded server and initialize SQL Upgrade
6. As a final step, the old active node will be rebuilt, we would install a fresh copy of windows 2003 64 - bit server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
Upgrade Advisor Against A SQL 7 Cluster Server
Aug 17, 2006Hi all,
i am in the process of upgrading my clustered SQL 7 to a new cluster with SQL 2005.
I tried to run Upgrade advisor against the SQL 7 cluster but i am not able to make it work.
I checked prerequisites on my client machine, checked if my account has administrator privileges on thew cluster and everything seem fine.
I tried to run UA using node name, virtual server name (as suggested in the help), IP address (both node and virtual server ones) and even SQL 7 instance name (!) with no result.
Are there any issue about upgrade advisor against a SQL 7 cluster ? or am I missing something about Upgrade advisor??
thanks for your help
Upgrade Servicepack For SQL 7 Enterprise In Win2000 Cluster
Aug 29, 2002When upgrading servicepack for SQL Server 7 in a Windows 2000 cluster, do I need to uncluster the servers before installing SP?
Install on Node 1 first?
Cluster Upgrade/migration Issue Advice.
Oct 8, 2007Hey all,
We have a simple two-node x86 failover cluster attached to a SAN on which SQL Server 2005 runs. We recently bought two new x64 boxes to upgrade the cluster. My original plan was to just add the new nodes to the existing cluster and then remove the old nodes from the cluster, but I just found out that you can't mix architecture types in a cluster.
So far, it seems our choices are:
1) Install x86 Windows 2003 Server on the new nodes, losing performance.
2) Make a new cluster and migrate the data, possibly imposing downtime.
Anyone have any suggestions?
In Cluster Steps Required To Upgrade Secondary
Aug 27, 2007If the primary master server become permanently unavailable, following a hardware failure for example, what could steps to promote the secondary master to the role of primary master.
The Secondary server is a updateable subscriber and there are other servers also in the cluster with read-only subscription.
As per my tests if primary goes down, we can create new publication on secondary and create its subscriptions.everything should work fine after that.
if primary comes up in any case that can create problem in new cluster so we should take care in this regard
please let me know if something is missing here.
Upgrade SQL Server 2000 Failover Cluster From SP3 To SP4
Sep 13, 2006I have a production failover cluster running SQL Server 2000 at SP3that I want to upgrade to SP4. I do not have a test failover clusterto test with so I need the install on the primary server to work thefirst time. Per the information I have I just install the patch on theprimary server and it will install both on the primary and on thesecondary.However, I remember when I did the initial install and it failed. Thefirst problem traced to the fact that the install uses temporary filesunder the profile of the installing administrator and the id had neverlogged into the second server so the install failed on creating thetemporary file. The was a second problem that related to an OS featurethat had to be off for the install to work.If anyone out there has done this upgrade and remembers encountering aproblem and its fix/workaround I would appreciate a head up warning.Thank you-- Mark D Powell --
View 1 Replies View RelatedSetup And Upgrade :: Cluster Installation Failed
Oct 8, 2010when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 Replies View RelatedSetup And Upgrade :: Add A Failover Cluster Node
Jan 3, 2010I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
Renistall Virtual Minimun Memory . Uncdms.dll
Sep 27, 2007View 1 Replies View Related
Setup And Upgrade :: 1433 Not Listening On 2012 Cluster?
Jul 27, 2015i setup a 2 node sql cluster but 1433 is not listening. I check sql configuration manager and entered 1433 for all ip addresses restarted services but still not 1433
View 14 Replies View RelatedStrategy For Upgrade To SQL Server 2005 , Consolidate And Cluster
Sep 29, 2006Hello there,
We have about a dozen SQL server 2000 Enterprise Edition servers in house. Our goal is to set up a cluster SQL server 2005 and consodiate the existing dozen servers to a few servers for easy manage and maintainence. So there are 3 things that we want to accomplish:
1. upgrade to SQL server 2005,
2. Consolidate existing servers
3. Make a cluster server to get high availability
But I'm sure what's the right order to acheive them. To upgrade each server to 2005 and then move them to cluster server? or set up the cluster server in 2005 and restore existing dbs to the cluster server. upgrade first or cluster first? upgrade first or consolidate first? pros and cons? upgrade or backup/restore? What do you recommend? We have lots of stored procedures, views and triggers, DTS packages and some replications. Any insight will be greatly appreciated.
-Jessie
Setup And Upgrade :: Add New Node To Server 2008 X64 Cluster
Nov 23, 2015I ran into problem while trying to install SQL Server 2008 to join to another node in a failover cluster ,you will find here the configuration doc and installation details. URL...
View 4 Replies View RelatedSetup And Upgrade :: Cluster Resource Cannot Bring Online
Nov 12, 2015I am trying to install fail over cluster for SQL and getting the below error message :
I am using domain admin account to do the installation
Setup And Upgrade :: Not Clustered Or Cluster Service Is Up And Online - Failed
Feb 27, 2013I installed a SQL server 2008 R2 on a 64 bit Stand alone system today morning
Now I am trying to apply SP1 on it. But it is not progressing further with the below. How to overcome this issue.
Note: Cluster services not installed on this server. Cluster service is not there in the services.msc as well.
Upgrade An Active Passive Sql Server 2000 Cluster To 2005
Aug 14, 2006I have upgraded our test server and on non cluster production machine. My next server is a cluster and I don't have a test cluster server. Do I upgrade the active node and that is all or am I going to need to fail it over and upgrade the other node.
Also the prerequesite for the upgrade advisor is .net 2.0 I am going to up that on each server one at a time but I am only going to add the upgrade advisor to one node is that ok.
I read the SP1 documentation and it clearly states only patch the active node and do not patch the inactive nodes.
SQL 2005 Standard To Enterprise Edition Upgrade On Existing Three-node Cluster
Jun 10, 2007Current set-up: three node cluster running Windows Server 2003 Enterprise Edition SP2 with two instances of SQL Server 2005 Standard Edition SP2.
Virtual node 1: Standard Edition, default instance, Database Engine only
Virtual node 2: Standard Edition, named instance, Database Engine, Analysis Services and Integration Services
Physical node A: Prefered node for virtual node 1
Physical node B: Failover node for both virtual node 1 and 2 (thus having two installations of Standard Edition)
Physical node C: Prefered node for virtual node 2
We started off with this set-up because there was no need for Enterprise features, and SQL 2005 supports failover clustering with two nodes in Standard Edition. Saved a bundle of cash, so everybody's happy. Now we need to run a solution on virtual node 2 that requires Enterprise features in Analysis and Integration Services, so an edition upgrade is required on virtual node 2. I have done some research and found several edition upgrade examples, but none that match the above scenario. We are running production on these machines, so I can't risk experimenting with command line options, I have to be right the first time.
Is it possible to mix two editions of SQL Server 2005 in one cluster? Can I upgrade virtual node 2 to Enterprise but leave virtual node 1 at Standard? What procedure do I have to follow to upgrade all three components of virtual node 2 to Enterprise Edition on both physical node B and C?
Any ideas will be greatly appreciated.
Setup And Upgrade :: Error During Remove Node From Server Failover Cluster
Jun 24, 2015I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
View 4 Replies View RelatedSetup And Upgrade :: Cluster Group (Available Storage) Reserved By Windows Failover Clustering
Jul 28, 2015I am setting up my first sql node on a 2 node cluster and runing into this
The disks are already added into the failover cluster manager
Step By Step SQL2000 Failover Cluster Upgrade To SQL2005
Oct 13, 2006is there such a paper? if so, can you pls point me to it? thx in advance
View 4 Replies View Related