Mining Models Accuracy

May 10, 2007

Hello

I've created models with Decision Tree and Neural Network algorithms that predict continous target. But I don't know how to interpret scores that occure under scatter accuracy plot. How should I interpret scores under scatter accuracy plot?
How can I estimate occuracy of model created with Time Series? How can I compare accuracy of model created with Time Series with models created with Decision Trees and Neural Network algorithms?

Thanks in advance.

View 5 Replies


ADVERTISEMENT

Mining Structure Has To Contain At Least 2 Mining Models To See Their Accuracy Charts?

Nov 27, 2006

Hi ,all here,

Thank you very much for your kind attention.

I just found that I am not able to view the accuracy chart for my mining model. The error message is: no mining models are selected for comparision. Which is quite strange.

Any guidance? thank you very much.

With best regards,

Yours sincerely,

View 5 Replies View Related

Where Can I Store The Mining Results From Mining Models In SQL Server 2005 Data Mining Engine?

Apr 26, 2006

Hi, all here,

I am wondering where can I store my mining results in data mining engine? For example, I got mining results like accuracy chart, decision trees, and other formats of results based on different mining algorithms I used for my data mining, so where can I actually store the results for reporting service use later? Is it possible to do that in SQL Server 2005?

Thanks a lot for any help and guidance in advance.

View 4 Replies View Related

How Get The Lift Chart In Datamining.i Am Not Geeting Mining Accuracy Chart And Mining Model Prediction

Sep 14, 2007



Hi,
I am not getting Mining Accuracy Chart and Min ing Model Prediction
Plz tel me how to do.And how to use the filter input data used to generate the lift chart and
select predictable mining model columns to show in the lift chart

View 1 Replies View Related

How Is The 'Score' Value Derived In The Lift Chart/Mining Legend For Data Mining Models?

Sep 26, 2006

Hi,
I have just run a simple data set through a model to predict a simple true or false value (i.e. binary output)
The Lift Chart/Mining Legend in Analysis Services shows three results €“ Score, Population Correct (%), and Predict Probability (%)

Population Correct I beleive is the percentage of predictions it got right out of the total number of predictions it tried to make. Is this correct?

However, I can€™t work out how the other two are derived in particular the 'SCORE'. To give a live example the scores were as follows:

Model Score Pop Correct Pred Probability
Decision Trees 0.83 76.59% 54.28%
Neural Network 0.75 67.63% 50.05%
Ideal Model 100.00%


Can anyone help with this and give a detailed explanation?

Many thanks,
S Rajput

View 4 Replies View Related

Error On Mining Accuracy Tab

Jan 25, 2007

Hi All
I have installed SP2 for SQL server 2005, i just want to try datamining like in the tutorial, i found error if i click "Mining Accuracy Chart" for comparing model with error

"TITLE: Microsoft Visual Studio
An error prevented the view from loading.
ADDITIONAL INFORMATION:
Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) (System.Windows.Forms)
"
any body can help.

thanks

View 3 Replies View Related

Error In Mining Accuracy Chart

Dec 15, 2006

I ran a decision tree, clustering and neural network mining model across a dataset of about 200,000 records. I am trying to evaluate the accuracy of each of my models but I can't view the results.

I get the following error:

Failed to execute the query due to the following error:

XML for Analysis parser: The XML for Analysis request timed out before it was completed.
Execution of the managed stored procedure GenerateLiftTableUsingDatasource failed with the following error: Exception has been thrown by the target of an invocation.Microsoft::AnalysisServices::AdomdServer::AdomdException.

View 1 Replies View Related

Infromation About Accuracy Of The Mining Model Problem

Dec 23, 2005

Hello!

I have a problem getting information about accuracy (percentage of the right predictions) of the model using DMX. Is it possible to get information about accuracy of the model using DMX? I didn't find any useful function... My second idea was to build and process the model. And then compare states of the predictable columns of the test data to states that the model predicts on the same data. And count them. That would be the way to get percantage of the right predictions... The problem is that usage of the function COUNT is not allowed??? I tried:SELECT COUNT(*) FROM [My Model Name].Cases and it didn't work like in standard SQL...
Is it possible to count rows in DMX? Any idea how to get accuracy (percentage) of the model? I would need this information in my application...
Thanx for any idea,
Ziga

View 7 Replies View Related

Mining Accuracy Chart, Predictable Column In Nested Tables

Oct 27, 2006

In the Mining Accuracy Chart, the predictable columns of nested tables does not show up in the "Select predictable mining model columns to show in the lift chart" table. The "Predictable column name" is empty.

Predictable columns in the case table shows up, but not the predictable columns in the nested table. What am I missing?

-Young K

View 1 Replies View Related

Question On Validation Of Mining Models

Jul 16, 2007

Hi, guys,

Thanks for your kind attention.

Just want to make things perfectly work and make the most of our fantastic SQL Server 2005 Data Mining Engine. Can any of you here give me some super advices on the validation of the mining models. As we always see, the 3 aspects of a mining model are: Score, Population correct, and Predict Probability. So the question is: How can we combine these three aspects to best judge the mining models by being able to tell which model is the best one? And to what extent can we really trust these mining models?

These are very important before we can actually bring the models into work to convince other people who have no ideas what are going on with these models. Yes, we just want to convince them with the results of these models and make the most of them and best help them getting the most from their business operations etc.

By the way please can you explain a bit details on each of these aspects? Thanks again.

I am looking forward to hearing from you shortly and thanks bunch for your help.

With best regards,

Yours sincerely,



View 3 Replies View Related

Can We Automate The Data Mining Models Management?

Jun 12, 2006

Hi, all here,

I am having a question about automating data mining models managements. As we know in many businesses, patterns vary very frequently, therefore, the mining models created will need to be created again afterwards according to new rules appearing in the data. But can we make all these process automated like automatically assessing the mining model accuracy and automatically recreate the mining models based on predifined specifications? Would please any one here give me any idea about that?

Thanks a lot for any guidance and help for that.

With best regards,

View 3 Replies View Related

To What Extent Can We Believe The Pattens Discovered By Mining Models?

Jul 16, 2007

Hi, all,

Again I am confused about the extent of being convinced by the mining models. We can validate the models with accuracy chart, but then to what extent can we trust that? (you never get 100% correct miming models) If we dont trust the results of the models, then the patterns the models discover are meaningless.

Just need some advices from you experts here to help me convince people on what I got from my mining models.

I am looking forward to hearing from you shortly and thank you very much.

With best regards,

Yours sincerely,

View 3 Replies View Related

Errors From Training Mining Models In SSIS

Jul 2, 2007

I am in the process of creating an Integration Services package to automate the process of training mining models and getting predictions. Until recently, I have been processing the models directly from Business Intelligence Studio without any problems. However, when I try to use the exact same training set as an input to the Data Mining Model Training destination, I get several errors. Here is the output:


[Mining Models [1]] Error: Parser: An error occurred during pipeline processing.
[Mining Models [1]] Error: Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
[Mining Models [1]] Error: Errors in the OLAP storage engine: An error occurred while the 'CPT MODIFIER' attribute of the 'BCCA DMS ~MC-CLAIM LIN~5' dimension from the 'BCCA LRG DMS TEST' database was being processed.
[Mining Models [1]] Error: File system error: The record ID is incorrect. Physical file: . Logical file: .
[Mining Models [1]] Error: Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
[Mining Models [1]] Error: Errors in the OLAP storage engine: An error occurred while the 'BILL TYPE' attribute of the 'BCCA DMS ~MC-CLAIM LIN~5' dimension from the 'BCCA LRG DMS TEST' database was being processed.
[Mining Models [1]] Error: File system error: The record ID is incorrect. Physical file: . Logical file: .
[DTS.Pipeline] Error: The ProcessInput method on component "Mining Models" (1) failed with error code 0x80004005. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.



I have not been able to find an answer as to why this is happening. I found a post regarding a similar problem with processing an OLAP cube in SSIS, but it seems that the author of that post never found an answer. Has anyone else here seen similar errors when processing mining models from Integration Services?



Also, if I process the mining models manually then try to run only predictions in SSIS, I get many of the same errors. I'll keep looking into the problem myself, but I would be very grateful if someone in this forum could shed some light on this issue.

View 4 Replies View Related

Problems With Input Columns For Mining Models

Nov 20, 2006

Hi, all experts here,

Thank you very much for your kind attention.

I got a strange problem with SQL Server 2005 data mining models though. I have selected the input columns for my mining model (which are different from the input columns for its mining structure, since I ignored some of the columns for the selected model). But the mining model still used all input columns from the mining structure rather than those I chose for the mining model.

Would please any one here give me any guidance and advices for that. Really need help for that.

Thanks a lot in advance for any help.

With best regards,

Yours sincerely,

View 7 Replies View Related

How To Scripting Existing Mining Models And Structures?

Dec 18, 2007

Hi!
If you make an view you can script it in SSMS and get the DDL.
How to do something similar with mining models/structures getting DMX?
I see you easy can get XMLA, but I would prefer the "dmx-ddl"...

Thanks
Bjorn

View 1 Replies View Related

Processing Mining Models && Structures Via SSIS

Dec 12, 2006

Still new to DM and SSIS...anyand all help is greatly appreciated!

In SSIS they say that you can use the Analysis Services Processing Task to process a mining model/mining structure, however, I do not see where you can give it a relational table to work off of. I know that I can use a data flow to do this but I wanted to go a different route if I could to process my models as I don't really necessarily need the data flow as what I am tring to do is pretty simple.

That brings me to a more general question, what is the best method for training your models using SSIS? I am building a new model everytime the package runs using some variables and the DDL task, running a query on it, and destroying it at the end of the package but I am having logistical problems training it outside of the data flow. I tried using the DM Query task but it requires that you output a result set and I am not sure if I can use it to create and process models.

I would think that they would just give you a DMX task similar to the SQL task but that does not seem to be the case. Also, when I browse the AS objects via the processing task I can only see the mining structures and not the mining models.

Am I just missing something here?


Cheers,

Dan Meyers

View 5 Replies View Related

How To Automatically Generate HTML Visualizations Of Mining Models Using Visio?

Jul 25, 2007

Hello!

I'll try to explain what I'd like to do. On my SQL Server 2005, SSAS contains a mining model (In fact a cluster one).
I'd like to show a detailed diagram build from this model on a web site. This diagram (and this is why I need automation) would depend on the user who's consulting it.
For example, a firm A will see the number of its customers in each cluster, and this information will be different for another firm B

So, I thought about several steps to perform:
1) Feed the model with the data for each firm
2) Build a Visio diagram from the previous data using the DM addins for Visio 2007
3) Generate HTML using the Visio export wizard
4) Publish HTML
And (important) this should be done automatically.

I made some experiments:
Step 1 is easy to perform with SSIS
Step 3 is also easy to do with the Visio SDK (using, among others, the exportAsHtml control) and Step 4 is trivial

I failed to perform stage 2, even with the SDK, since creating a diagram from a DM template requires the user to fill a wizard. By code, I'm able to create a document from a DM template, Drop a DM Stencil but when the wizard appears I'm unable to get a handle on it. And even if I was, I dunno if it would be a "clean" way of doing.

So my question is: first of all: isn't there an easier way to generate HTML from Mining Models automatically? And if my approach to this problem is the best (or the "least bad"), how to generate datamining Visio diagrams from code automatically?

View 5 Replies View Related

Quesion On Algorithm Settings Do Not Really Significantly Improve The Results Of The Mining Models?

Jul 16, 2007

Hi, all,



Another tricky confusion to me is that: many algorithms settings for the native algorithms in SQL Server 2005 Data Mining do not really significantly improve the results of those mining models with settings changes? (Apart from clustering algorithm setting of cluster number, by setting 0 as the number of clusters, the system will automatically cluster the data into clusters which I assume is the best way of mining the model with this method).



Any good advcies on this will be a lot appreciated.



I am looking forward to hearing from you shortly for this confusion and thanks a lot in advance.



With best regards,



Yours sincerely,



View 3 Replies View Related

Retaining Fields For Multiple Models In Mining Model Prediction Tab Design View

Nov 29, 2006

I am using BI Dev Studio for SS2005 in a research (as opposed to a production) environment. Often I want to compare the results of multiple models using the same attributes. If I switch to a different model, the Design view completely resets. Is there any way to retain the same field names with different models in the Design view?

My current workaround is to give my models similar names with AR, DT, CL, LOG, NN suffixes and make global changes in the DMX.

I have consulted the following without finding an answer:
http://msdn2.microsoft.com/en-us/library/ms178445.aspx
http://msdn2.microsoft.com/en-us/library/ms175642.aspx
http://msdn2.microsoft.com/en-us/library/ms175678.aspx
http://msdn2.microsoft.com/en-us/library/ms175637.aspx

Thanks for your help,

Sam

View 3 Replies View Related

Problems Predicting Unseen Cases Of Nested Tables Data Mining Models

May 27, 2007

Lets take the following example:



Movie train table:
ID Class
1 +
2 +
3 -
4 +
5 -



Actor train nested table:
ID MovieID Gender
1 1 F
2 1 M
3 1 F
4 1 F
5 2 M
6 2 M
7 2 F
8 3 F
9 3 F
10 4 M
11 4 M
12 4 F
13 4 F
14 5 F
15 5 M



We want to build a classifier model in order to predict the Class of a Movie based on the Gender of movie's actors. To deal with the nested table Analysis Services maps each record of the nested table to an attribute of the case table. These attributes are named Actor(n).Gender with n = 1..15, and so they are dependent on the nested table record numbers. Both Microsoft Decision Trees and Microsoft Naive Bayes algorihms use these attributes without any modification.



We are implementing a Relational Naive Bayes algorithm and we are planning to aggregate such attributes in order to make them independent of the nested table record numbers.


Next step we tried to predict some unseen cases and here we face with
a very huge problem.


Lets take more two tables of unseen cases:



Movie test table:
ID Class
6 +
7 NULL
8 NULL



Actor test nested table:
ID MovieID Gender
1 6 F
2 6 M
3 6 F
4 6 F
16 7 F
17 7 M
18 7 F
19 7 F
20 7 F
21 8 M
22 8 M
23 8 F



Predicting the movie 6 Class is not a problem since the movie actors were included in the training dataset and when the records are mapped to attributes because they already exist in the model. But when you
try to predict movies (7 an 8) with unseen actors all new attributes are simply ignored in the ALGORITHM:redict call (in_ulCaseValues is zero!) because they do not exist in the model!



What is the solution?

View 3 Replies View Related

A Time Series Prediction Was Requested With A Start Time Further In The Past Than The Internal Models Of The Mining Model

Feb 19, 2008

Hi all,

I have a very simple time series model which processing works fine without any problem. However when I run the following query

SELECT

[TimeSeries].[PriceChange],

[TimeSeries].[Symbol],

PredictTimeSeries(PriceChange, -3, 2)

From

[TimeSeries]

WHERE

[TimeSeries].[Symbol] = 'x'


I get the following error:

TITLE: Microsoft SQL Server 2005 Analysis Services
------------------------------
Error (Data mining): A time series prediction was requested with a start time further in the past than the internal models of the mining model, TimeSeries, specified in the HISTORIC_MODEL_GAP and HISTORIC_MODEL_COUNT parameters can process.

The following is the excerpt of the minding model script related to the two parameters:


<AlgorithmParameters>

<AlgorithmParameter>

<Name>MISSING_VALUE_SUBSTITUTION</Name>

<Value xsi:type="xsdtring">Previous</Value>

</AlgorithmParameter>

<AlgorithmParameter>

<Name>HISTORIC_MODEL_GAP</Name>

<Value xsi:type="xsd:int">1</Value>

</AlgorithmParameter>

<AlgorithmParameter>

<Name>HISTORIC_MODEL_COUNT</Name>

<Value xsi:type="xsd:int">10</Value>

</AlgorithmParameter>

</AlgorithmParameters>


These HISTORIC_MODEL_GAP (1) and HISTORIC_MODEL_COUNT (10) should accommodate PredictTimeSeries(PriceChange, -3, 2). Could anyone shed some light on this?



View 3 Replies View Related

Sampling Data Set Via Integration Services Data Flow For Data Mining Models Without Saving Training And Test Data Set?

Nov 24, 2006

Hi, all here,

Thank you very much for your kind attention.

I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.

Thank you very much in advance for any help.

With best regards,

Yours sincerely,

View 5 Replies View Related

Prediction Accuracy

Mar 5, 2007

Hi ,
I am a novice Data Mining Programmer.
I am using Time series algorithm for forecasting.
We are Quite concerned about the accuracy of Prediction output.
For Example Our Data is like this

StudId Date Perf
001 01/01/2001 90
001 02/01/2001 89
001 03/01/2001 87
002 01/01/2001 59
002 02/01/2001 70
003 03/01/2001 47

If I write my Prediction Query to predict for 100 th time step.Its giving me out put like

Date Perf
03/01/2015 47.000000115

We are not sure about the accuracy of the values. Is it possible to use trend information as input to my model and make my prediction based on that.
I don€™t know how to do that? Can anyone help?

Thanks,
Karthik.

View 1 Replies View Related

Accuracy Vs Generalization

Apr 15, 2006

Hi!

So sorry for posting yet another one of my silly posts about the correct way of doing things!



I am using Stored Procedures to do various things in my database (inserting/deleting/updating) and using SQL Server 2000 SP4



The current situation is that I have a stored procedure which checks certain user details and returns either -1 or 1 as a success indicator to the caller.



Now, obviously if we executed several queries in this stored procedure, performance will be an issue.

However, I have no idea how to balance up the whole "more useful information" vs "general information". What I mean is this:

if we are checking 3 items in a table, I want to return the success value back to the caller - in this case, we could do an IF statement to see if the record exists, if it does, set the return value to 1, else, -1.



But then you may want to be more informative to the user, specifically stating what part of the information they entered is incorrect/invalid. So having this in mind, we would then need to execute, say, 3 queries to return a more specific "error" value.



What should I do in this case?

I want to check the username, password and if the account is activated.

Currently I have this query going on:



IF EXISTS (SELECT [ID] FROM Users WHERE username = @un AND [password] = @pw AND activate = 1)

SET @theResult = 1

ELSE

SET @theResult = -1



firstly, is that the good way of doing things? if not - then what is the better way?

secondly, if we decide that we want a specific detailed return value/error message, it would mean I have to check the results I want using a couple more queries, such as one query to check username, one query to check password and another to check if the account is active or not and then return the appropriate value back to the caller.



is this a good way of doing things? I am confused and stuck!



Many thanks for your valuable response :)

View 3 Replies View Related

Prediction Accuracy

Dec 8, 2006

hi,

I am using time series agorithm.I need standard deviation in %. I am using SELECT StudID, PREDICTSTDEV([Perf]) FROM [Stud_Model].This one is giving me the standard deviation like this

StudID stDev

001 2.891298978779

002 2.797288978779.

But I need like this

StudID stDev

001 +50%

002 +51%(From The Previous) like that.

Is it Possible.

Thanks,

Karthik.

View 1 Replies View Related

Testing Stored Procedure For Accuracy

May 14, 2008

I am given a task to test a complex stored procedure that has been recently modified for performance. The stored procedure runs 2 processes based on different parameters provided to it in real time. The procedure has been modified to incresease its performance from 22hours to just 1 minute. One of the two processes that this SP handels have been tested and is thus very accurate. The testing of 2nd process is given to me and I am looking for some great help in how to go about testing it step by step. I can provide more info on the SP and how we increased its performance, if you are interested.
I know its a lot to ask but I really need some help. I have limited knowledge in SQL.

View 10 Replies View Related

Excel 2007 Data Mining Add-in Advance Create Mining Model Question

Apr 11, 2007

Hi,



I am trying to model data in analysis services with the Advance Create Mining Model function in the excel addin. I am having trouble creating an association model that works like the Associate button above the Advanced button.



The format of my data is like this



OrderID Product

100 Bike

100 Helmet

100 Shoes

200 Helmet

200 basketball

200 Bat

300 Shoes

300 Socks



The associate button works perfectly since it asks me which column is the transaction id (orderid) and which column I am trying to predict (product). The advanced create mining model asks me to determine what the columns are...

OrderID=key Product=Input+Predict?



When I run the advance create mining model associate, I get a browser that gives me no rules and the support for only one item itemset (each product but no combination of products).



Does anyone know what I have to do to get it to work like the associate button?

View 8 Replies View Related

Create Mining Structure And Mining Model With Code

Oct 18, 2006

Dear friends,

I encounter a serious problem.

I would like to develop an application that can create Data Mining structures and a mining model in SQL Server 2005 with VB.NET. I tried the code from book Data Mining with SQL server 2005 in chapter 14 but did not work. Any good idea?

Please help me.



Best regards,

Manolis

View 5 Replies View Related

Create Mining Structure And Mining Model With Code

Oct 20, 2006















Thank you very much for your help.
The errors that I can see in the code that you gave in your answer are the following and they are more or less the same as I had previously

I tried the code but initially I have encounter the following problems.

1. In any line that have the declaration As Server, As Database like in
Public Function CreateDatabase(ByVal srv As Server, ByVal databaseName As String) As Database gives me the problem that type Database is not declared the same type Server is not declared and it does not give me any option.

2. In addition to that for As DataSource, As RelationalDataSource, As RelationalDataSourceView, As ScalarMiningStructureColumn, As DataSourceViewBinding, gives me the problem that type is not declared.

3. Finally in mc = New MiningModelColumn("Yearly income", Utils.GetSyntacticallyValidID("Yearly income", Type.GetType(MiningModelColumn))) is not accesible in this context because it is 'Private'.
I have some more problems but I thing that by solving the above that I referred I will solve the rest.

Thank you any way.
Best regards,
Manolis



PhD student

View 1 Replies View Related

Can I Filter The Data On Mining Structure, Mining Model?

Jul 18, 2006

I perform data mining on all products and a specific product category.
Do I need to create 2 data source views, one for all products and the other one for the specific product category?
Afterward, I run the Data Mining Wizard 2 times to create 2 mining structures.
I also need to add the same mining model (e.g. Bayes, Cluster) to each of these mining structures.
Is there any simple way to do it?

Thanks.
Joe.

View 3 Replies View Related

Data Mining :: Informational (Data Mining) - Decision Trees Found No Splits For Model

Sep 29, 2015

I followed the tutorial posted at [URL] ...

Everything was ok until the last step where I had to process the mining structure which resulted in a warning

"Informational (Data mining): Decision Trees found no splits for model, Tbl Decision Tree Example."

What does this error mean? How do I resolve it? Also, I only see the first level in the Mining Model Viewer, I don't see the levels 2 and 3.

View 2 Replies View Related

How Can We Compare Other Data Mining Software Packages With SQL Server 2005 Data Mining?

Feb 23, 2007

Hi, all experts here,

I would like to know if there is any way to migrate third-party data mining packages with SQL Server 2005 data mining algorithms together then we can have a comparison among all of them to get the best results for training models.

I am looking forward to hearing from you.

Thanks a lot.

With best regards,

Yours sincerely,

View 1 Replies View Related

Data Mining - Scalar Mining Structure Column Data Type Error...

May 31, 2006

Hoping someone will have a solution for this error

Errors in the metadata manager. The data type of the '~CaseDetail ~MG-Fact Voic~6' measure must be the same as its source data type. This is because the aggregate function is not set to count or distinct count.

Is the problem due to the data type of the column used in the mining structure is Long, and the underlying field in the cube has a type of BigInt,or am I barking up the wrong tree?

View 16 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved