Mirror Monitor Error: Server Replication Requires The Actual Server Name To Make A Connection

Oct 17, 2007

I'm getting the following error when launching the database mirroring monitor and attempt to connect to my database.


TITLE: Connect to Server
------------------------------

Cannot connect to dborat01.hs.pitt.edu.

------------------------------
ADDITIONAL INFORMATION:

SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'xxxxxx'. (Replication.Utilities)

------------------------------
BUTTONS:

OK
------------------------------

View 3 Replies


ADVERTISEMENT

VS2005 Error: Connection To SQL Server Files (*.mdf) Requires SQL Server Express 2005 To Function Properly.

Mar 6, 2008



Good Evening All,

I've serached this forum and Google'd for a resolution to this issue, to no avail. Here's the scenario:
I'm running VS 2005 on Windows Media Center laptop and need to create ASP.net membership for my web application built using VB. I have SQL Server Developer installed with instance name MSSQLSERVER. Previously, I uninstalled SQL Express and installed Developer edition and can now open and utilize Management Studio.

Now, when I try to create a new SQL Server database in my solution's App_Data directory, I receive the above error. I already changed instance name in VS2005 per Tools-Options-Database Tools-Data Connections to MSSQLSERVER.

Could someone provide me with a list of procedures to ensure proper setup of VS2005 with SQL Server Developer Edition?

Thanks much for your help.

View 5 Replies View Related

Mirror And Witness Connection In A Disconnected State Immediately After Adding Witness Server To Mirror Session.

Jan 31, 2008


After adding the Witness Server to the Mirror session, the Witness Connection state between the Mirror and Witness Connection is Disconnected and the state between Principal and Witness Connection is Connected.

The procedures defined in Books Online was used to setup Database Mirroring...when the Witness server was added to the Mirror session, only the alter database T-SQL statement was executed on the Principal server.

ALTER DATABASE <db_name> SET WITNESS = 'TCP://<servername>:<port>'

After executing the above statement, a few seconds later the state between Principal and Witness Connection changed to Connected and the state between Mirror and Witness Connection remains Disconnected.

The Mirror session is not using Certificates, every server is on the same domain, using the same domain login account, and all servers have SP2 installed running Enterprise Edition.

Any idea's why the state between Mirror and Witness Connection remains Disconnected?

Thanks,

View 9 Replies View Related

Integration Services :: SMTP Server Requires A Secure Connection Or Client Was Not Authenticated

Apr 11, 2013

I have an issue with SMTP server " send mail task ".  we see the following error [Send Mail Task] Error: An error occurred with the following error message: "The SMTP server requires a secure connection or the client was not authenticated.In SMTP connection manager what we should give in SMTP SERVER, if we use gmail id's in send mail task editor.

View 4 Replies View Related

Error: SQL Server Requires Encryption On

May 25, 2007

Hello All,



I have a commercial application built for Pocket PC's that connects to SQL Server 2005 via TCP/IP over wireless networks. In installations for our sales people we installed SQL 2005 Express on their notebooks for demonstrations. In one of these installs we are getting the following error message: "An error occurred - SQL Server requires Encryption On". We do not use encrypted connections and I have verified encryption is turned off in the Options tab in SQL 2005 login screens.

Here is the connection string we use in the app.config file on the Pocket PC's:
<add key="connStr" value="Data Source=192.168.0.19,1433;Initial Catalog=SQL0018;User ID = User01;Password=PW01"/>

Other apps on the notebook are connecting to this same SQL Server without any issues. Thank you in advance for any help here,

Jack

View 3 Replies View Related

Error: SQL Server Requires Encryption On

May 25, 2007



Hello All,



I have a commercial application built for Pocket PC's that connects to SQL Server 2005 via TCP/IP over wireless networks. In installations for our sales people we installed SQL 2005 Express on their notebooks for demonstrations. In one of these installs we are getting the following error message: "An error occurred - SQL Server requires Encryption On". We do not use encrypted connections and I have verified encryption is turned off in the Options tab in SQL 2005 login screens.

Here is the connection string we use in the app.config file on the Pocket PC's:
<add key="connStr" value="Data Source=192.168.0.19,1433;Initial Catalog=SQL0018;User ID = User01;Password=PW01"/>

Other apps on the notebook are connecting to this same SQL Server without any issues. Thank you in advance for any help here,

Jack

View 1 Replies View Related

Error - SQL Server Requires Encryption On

May 25, 2007



Hello All,



I have a commercial application built for Pocket PC's that connects to SQL Server 2005 via TCP/IP over wireless networks. In installations for our sales people we installed SQL 2005 Express on their notebooks for demonstrations. In one of these installs we are getting the following error message: "An error occurred - SQL Server requires Encryption On". We do not use encrypted connections and I have verified encryption is turned off in the Options tab in SQL 2005 login screens.

Here is the connection string we use in the app.config file on the Pocket PC's:
<add key="connStr" value="Data Source=192.168.0.19,1433;Initial Catalog=SQL0018;User ID = User01;Password=PW01"/>

Other apps on the notebook are connecting to this same SQL Server without any issues. Thank you in advance for any help here,

Jack

View 4 Replies View Related

Witness Server Connection To Mirror Disabled?

Jun 28, 2007

Hello,



the Mirror Server is not connected to the Witness Server.

Mirror Server and Wtiness Server are instances on one server.



I get this error:

"
2007-06-28 17:08:12.77 spid23s The server instance Witness rejected configure request; read its error log file for more information. The reason 1451, and state 3, can be of use for diagnostics by Microsoft. This is a transient error hence retrying the request is likely to succeed. Correct the cause if any and retry."


In the SQL Profiler for the Witness Server I get "An error occurred while receiving data" Error 64.

In the witness server logs is nothing depending on this.



The connection between the witness and principal and the mirror and principal are all right. I have created User logins with certificates on the same way on all instances.



What can I do?



Greets

View 4 Replies View Related

Red X Show On Replication Monitor (publications Is Disconnected From Replication Monitor)

Jan 30, 2007

I have setup transactional replication everything on one box. later(two or three weeks later), Replication monitor is show red X Under my publishers (publications is disconnected). this is SQL2005.

Everyone known how to fix this problem?

Thanks,

Frank

View 1 Replies View Related

SQL Server 2012 :: How To Monitor Replication Count Using Code

Jun 4, 2015

I Want to monitor Replication count of object (Table )if it is not equal to Publication (Table ) and subscriber (Table ), It have to send mail with count difference.

View 9 Replies View Related

SQL Tools :: Script To Monitor Server Transactional And Snapshot Replication

Apr 28, 2015

Any TSQL script to monitor replication(Transactional, Snapshot) with current status ? I have tried below script but it giving error.

"Msg 8164, Level 16, State 1, Procedure sp_MSload_tmp_replication_status, Line 80
An INSERT EXEC statement cannot be nested."

DECLARE @srvname VARCHAR(100)
DECLARE @pub_db VARCHAR(100)

View 4 Replies View Related

Merge Replication Error: 'Failure To Connect To SQL Server With Provided Connection

Mar 6, 2007

Hi!I´m trying to create a merge replication publication for a SQL MobileApplication .Everything works fine creating the publication and I'm able to dothehttp://xxx.xxx.xxx.xxx/aaaaaaa/sqlcesa30.dll, and it display's the"sql server mobile server agent 3.0".But when I run the application on the PDA and it´s doing thereplication it appears the following error:'Failure to connect to SQL Server with provided connectioninformation . SQL Server does not exist , access is denied becausetheIIS user is not a valid user on the SQL Server , or the password isincorrect' .any idea of which could be the reason...?Thanks in advance!!!

View 1 Replies View Related

Replication Monitor Error

May 8, 2006

When Replication monitor shows an error icon, I removed all the publication jobs completedly. After I reconfigured publishing, subscriber,Distribution, why the replication monitor still shows an error icon even though there is no replication job scheduled?



Thank you!

View 3 Replies View Related

Help. When Using Profile GetPropertyValue, I Get The Following Connection Error: An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Sett

May 3, 2008

 Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on  my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100:    public virtual string Address2 {Line 101:        get {Line 102:            return ((string)(this.GetPropertyValue("Address2")));Line 103:        }Line 104:        set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot021d50639a6858cApp_Code.54nvluyo.1.cs    Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]   System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435   System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82   System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105   System.Data.SqlClient.SqlConnection.Open() +111   System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84   System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197   System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782   System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428   System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404   System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117   System.Configuration.SettingsBase.get_Item(String propertyName) +89   System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36   System.Web.Profile.ProfileBase.get_Item(String propertyName) +68   System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4   ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot021d50639a6858cApp_Code.54nvluyo.1.cs:102   ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242   ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.]   System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0   System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72   System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308   System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29   System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480   System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960   System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17   System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149   System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70   System.Web.UI.WebControls.FormView.DataBind() +4   System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82   System.Web.UI.WebControls.FormView.EnsureDataBound() +163   System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69   System.Web.UI.Control.EnsureChildControls() +87   System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21   System.Web.UI.Control.FindControl(String id) +9   CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60   System.Web.UI.Control.PreRenderRecursiveInternal() +86   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Control.PreRenderRecursiveInternal() +170   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041 

View 1 Replies View Related

Launch Mirror Monitor Option Is Not Available

Nov 29, 2007

I have configured a Mirror with Server A as Principal, Server B as Mirror. I can Remote Desktop into both machines and see the Launch Mirror Monitor option in the Tasks list from the Object Explorer. I do not, however, have the option when logged in from my desktop Object Explorer. In each instance, I log into OE using the SA login. Both machines are on sp2. I have seen others post similar problems but have not found anyone with a resolution. Any help is greatly appreciated.

Thanks,
StephenNva

View 3 Replies View Related

Merge Replication Failing With Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server

Sep 28, 2007



Hi,

I have merge replication configured over VPN and the replication is failing to connect to the subscriber through Named pipes with the error Named Pipes Provider, error: 40 - Could not open a connection to SQL Server ......

Actually , I am having issues with Named pipes connection from publisher to subcriber. I have enabled the protocols and also enabled the remote connections using both tcp/ip and named pipes. I have created the client network alias using named pipes

Also, due to security reasons only few ports have been released on the subscriber. Please provide me some information on the following.
1) Does any port specifically be released for listening on named pipes? i am able to connect using tcpip with out any issues as 1433 has been released.
2) How to configure the replciation to use tcpip and not named pipes (guess by default it will use named pipes)?




View 1 Replies View Related

Mirroring :: How To Reduce LDF Size While Mirror Enabled With Mirror And Witness Server

Jun 14, 2015

I am using SQl Server 2012 Database Mirroring with around 40 gb as mdf and 1 gb as ldf. Now my ldf size increased . How to reduce ldf size while mirror enabled with mirror server and witness server. Can shrink the ldf with mirror enables.

View 4 Replies View Related

Error Icon On Replication Monitor And Sub Items

Dec 6, 2006

Hi,

Have two servers, one production server and one backup server. Both are Windows 2003 Server having SQL Server 2000 installed.

I have created replication on these servers using a wizard. I then generated SQL scripts to delete and create the replication. These scripts work well, but to test to remove the replication on both servers I used sp_removedbreplication 'DBNAME' on both servers. Not all were removed and on Replication Monitor and sub items plus Log Reader Agent there were added an icon, a red 'X' as in error. The replication seems to work.

Does anyone have any idea on why this happened and what I can do about it. It is not very nice to have errors in replication on a customers servers.

Grateful for answers
Best,
/M

View 1 Replies View Related

Missing Feature In SP2 Database Mirror Monitor

Mar 29, 2007

Hello,

I've been running SQL 2005 Enterprise SP1 for some time. After installing SP2, I miss the "Database Mirror Monitor"-Feature. Where is it? Did MS kill the feature?

regards
alejandroo

View 6 Replies View Related

How To Make A SQL Server Connection With ASP.NET

Jan 18, 2006

Hi.Working with ASP this connection works:stringMyConn = "dsn=foo.com.bar;uid=john;pwd=xxxx;"set myConn = Server.CreateObject("ADODB.Connection") myConn.open stringMyConn But it doesn't with ASP.NETDim myConn As SqlConnection = New SqlConnection("dsn=foo.com.bar;uid=john;pwd=xxxx;")myConn.OpenWhat am I doing wrong? Thank you very much.

View 1 Replies View Related

SQL Server 7 On Win 98 Machine Will Not Let Me Make A Connection.

Jun 24, 2001

Installed SQL Server 7 on Win 98 machine, keep getting errors:Unable to connect to server servername:

Server: msg 11, Level 16, State 1
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]General network error. Check your network documentation.

Did the troubleshooter on M$ Knowledgebase, still did not work.
Still get the above and this error:
General network error. Check your network documentation.
ConnectionOpen (connect())

Went to install SP3, and now It won't let me continue without an sa password.
I never had a password to begin with.

Oh, the fun of it all! :)

Any and all help will be greatly appreciated.

Thank You.

CZ

View 1 Replies View Related

Error 1418, Fails To Connect Mirror Server

Feb 20, 2006

II use the mirroring wizard to config all these three servers(windows authorization is used), the error logs in primary server and mirror server are showed as below
a) On primary server:
Error: 1474, Severity: 16, State: 1
Database mirroring connection error 4 'An error occurred while receiving data: '10054(An existing connection was forcibly closed by the remote host.)'.' for 'TCP://mymirror.mydomain:5022'
b) On mirror server:
Database Mirroring login attempt by user 'NT AUTHORITYANONYMOUS LOGON.' failed with error: 'Connection handshake failed. The login 'NT AUTHORITYANONYMOUS LOGON' does not have CONNECT permission on the endpoint. State 84.'.

It states I do NOT have permission on this endpoint, but actually, I grant the permission to the endpoint on both primary and mirror server using command
GRANT CONNECT ON ENDPOINT::Mirroring TO [mydomainmyuser];
Also, I followed the article http://msdn2.microsoft.com/en-us/library/ms189127.aspx ,no firewall issue, the endpoint is created and started by checking sys.database_mirroring_endpoints
Hope someone can help me resolve this issue... Thank you very much..

View 44 Replies View Related

ExecuteReader Requires An Open And Available Connection. The Connection's Current State Is Closed.

Apr 26, 2007

I am accessing SQL2005 with C# code using OleDbConnection.



A try and catch block catches the following error once a while between the Open() and Close() of the connection:

ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.



I do not even have any idea where to start to debug this. The ExecuteNonQuery() runs a delete SQL query. It works 99.9% of the time. I do not see anything wrong when this error happens.



Any hint would be greatly appreciated.



View 9 Replies View Related

Can't Make A Connection To SQL Express As Server Does Not Exist Or Access Denied...

Aug 9, 2006

Hi

I have recently downloaded SQL Server Express which I have installed using Windows authentication mode. I cannot seem to be able to make a connection to SQL Server from Dreamweaver or Microsoft Visual Web Developer as I am getting an error Server does not exist or access is denied....

I am relatively new to all of this, so would appreciate any advice....

When I installed SQL Server Express I chose Windows Authentication. When I fire up SQL Express and view Security option - the installation program has set up an sa login with a random password. I did not set this password, but think this might be a reason why I can't connect. To rectify the problem I tried creating a new user in SQL Server Express with a password that I specified. On going in to check the settings, I notice SQL Server Express has gone and changed it from the password that I set up.

Now when I try and connect to SQL Server Express I specify the following in the connection paramaters

Server: BGIRLSQLEXPRESS

Database The database name that I've created

User: the new user that I created

Password: the password I created as part of new user setup

Now I get error message Server does not exist or access denied

Is the problem to do with passwords or perhaps one of the many parameters one seems to have to set up? How can I change a password if I didn't create it? Is there anywhere I can reset it?

PLEASE HELP - I have literally spent 3 days attempting to get this working and am about to give up entirely. Due to my lack of experience, I need very specific step by step instructions..









View 3 Replies View Related

Error While Establishing A Connection To The SQL Server 2005 - Could Not Open A Connection To SQL Server

Apr 12, 2007

Hi, I had an old web application created during asp.net 1.1 and it have a connection problem with the sql server 2005 when it is mirgrated to a new webserver with dotnet framework 2.0 platform. I have enabled the remote access(TCP/IP and named pipes) in sql server 2005, did all the neccessary things, check whether the TCP/IP is enabled, named pipe is enabled...  I created another web application using VS 2005. The database connection works perfectly well.This are the connectionString from the old web application.<appSettings>    <add key="ConnectionString" value="Server=127.0.0.1;Database=somedb;User id=user; Password=somepassword; Trusted_Connection=False; POOLING=FALSE"/></appSettings>  Thankyou in advance! 

View 4 Replies View Related

SQl Server Error: ----&> Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server

Apr 23, 2008

 
Hi Friends,
Im using .Net2008 and MS SQL Server2005, I Have a web application , i want to connect to the server machine SQL Server,  When i run the application im getting the following error.
Im trying to connect to the database from local machine application to server machine database
  An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My WebConfig File is<connectionStrings>
<add name="NewConnectionString" connectionString="Data Source=sqlserverservername.com;Initial Catalog=Test;UID=User;PASSWORD=Pwd;Integrated Security=True;connect timeout=30" providerName="System.Data.SqlClient"/></connectionStrings>
 
<appSettings>
<add key="connectionstring" value="Data Source=Sys67;Initial catalog=DB;user id=sa;password=sa;connect timeout=30"/>
</appSettings>
Please Help me to sortout this ISSUe, Its very urgent please 
 
 

View 7 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections.

Jan 22, 2008

My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. 
According to this article: http://support.microsoft.com/kb/914277  I am supposed to:




1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder.  The only thing in there is "SQL Server Error and Usage Reporting"...
 The other thing I am greatly concerned with is this:  All is want is for my webpages to be able to access my database for user authentication.  I DO NOT want to grant the internet rights to remote connect to my database.
 
 
 
 

View 4 Replies View Related

Help Me ...Server Connection For Replication

Oct 16, 2006

Hi,..Please help me..

We have two server on pulbilc ip A , B in other country, and there replication will working fine. But i want to replicate data from one online server(A) to my local office(in my country) server(C). means from public ip to private(A->C). then some one told me that you have to put both server on public for replication. after the i put my local server(c) on public ip. but now i am facing the problem that i am able to connect C to A(means my office server to other country server) but not able to connect A to C(means other country server to my office server). when i am connecting from A to C then error shows is "defaut sqlserver server does not allow remote connection". I have change all the sql settings..and also done required changes in firewall but not successed. my operating system 2003 and database sql2005........ please help me................ASAP

thanks and regards

Vipin yadav

View 1 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: SQL Network Interfa

Dec 10, 2007

I get the following error and have been trying to figure out why I keep getting it.  Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error.  Then I moved it to my local C drive and same thing.  I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do.  I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled.  I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss.  I dont' think using different version of .net framework can create this error.  I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated.  Thanks in advance.
 
Server Error in '/RBOdev' Application.


An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:



An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:



[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692



Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832

View 3 Replies View Related

Server &#34;lock Up&#34; That Requires A Reboot To Recover

Feb 20, 1999

I have a situation that I was wondering if anyone has ever ran into before. It has to do with one of my MS SQL servers. The hardware is a ALR/Gateway 9000R with 4 PP200's, 1 Gb RAM, and a RAID 5 with 72 Gb storage. The NIC card is an ATM 155 Mbit card connected directly to our fiber backbone.

I have WinNT 4.0 Server Enterprise Edition loaded with SP4 and MS SQL Server 6.5 Enterprise Edition with SP5 installed.

I have 7 seperate active databases on the server supporting 7 different applications. The server has been on-line for approximately 4 weeks and just recently (last Thursday) it has started to "lock up" every couple of days. By lockup I mean that it starts to reject all requests by all users. No one can connect to the server including myself. The MS SQL error log grows and grows until we reboot the server. The error logs are 100 Mb or larger in size due to rejection errors being repeated over and over again.

There has been no change made to the server since initial installation.

The error in the MS SQL error log that keeps on being repeated is...
"Message 17308: Kernelerror - Lazywriter. Process (process ID number) generated access violation; SQL Server is terminating this process."

We have an incident in with Microsoft but they are not responding fast enough.

I was hoping that someone out there may have had this type of occurrance happen before.

Any suggestions?

Jim

View 1 Replies View Related

SQL Server Replication Connection Problem

Apr 19, 2007

Hi



I have a problem when trying to setup replication between two SQL servers on different networks.



My publication server is SQL Server 2005 Standard Edition. My subscription server is SQL server 2005 Express Edition



I have setup the publication no problem but am now trying to create my subscriber. However, when trying to connect to the server, I receive the following error:



SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'W2M-RDC-01'. (Microsoft.SqlServer.



However, because the servers are not on the same network, I cannot use the server name.



Why does it not allow you to connect to an IP?



Is there a way to create an alias? I have read that you can but am unsure how to do this. Do I need to change the hosts file? If so, where can I find this and what exactly do I need to change?



Kind Regards

Dan Rostron

View 4 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provide

Jan 24, 2008

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

View 2 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provide

Apr 10, 2008

Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.  

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved