If I am using Database Mirroring for my production database in SQL Serever 2005, can I do mirroring on the mirror database?
Principal Database -- Mirror -- Mirror A -- Mirror -- Mirror B
Can this be done?
Question 2:
Can I do 2 mirroring on a single principal database? If can, which mirror database it will goes when the failed over happen? can the other mirror switch to mirror the failed over database?
I am using SQl Server 2012 Database Mirroring with around 40 gb as mdf and 1 gb as ldf. Now my ldf size increased . How to reduce ldf size while mirror enabled with mirror server and witness server. Can shrink the ldf with mirror enables.
we designated one server as a mirrored server. this server will host all mirrored databases from different principles in different server using certificate.
1) Server A (Principle) Server B(Mirrored) 2) Server C (Principle) Server B(Mirrored)
I was able to set up mirroring between A and B. But unable to set up mirroring between C and B. My question is "Can I grant connect on endpoint to two different host logins?"
For example, on the server B I created two different logins for Server A and C in order to assign different certificates to two principle servers.
For Server A. create login server_A_login with password = 'djkkajnxks'; go create user server_A_user for login server_A_login go create certificate server_A_cert authorization Server_A_user from file = 'c:certificateserver_a_cert.cer' go
GRANT CONNECT ON ENDPOINT::Endpoint_Mirroring TO [server_a_login]; GO
For Server C. create login server_C_login with password = 'djkkajnxks'; go create user server_C_user for login server_c_login go create certificate server_c_cert authorization Server_c_user from file = 'c:certificateserver_c_cert.cer' go
GRANT CONNECT ON ENDPOINT::Endpoint_Mirroring TO [server_c_login]; GO
when I set up like this and try to start mirroring, I am getting error from server c saying, "the network tcp:serverb.corp.com can not be reached or does not exist"
But mirroring between server a and b is OK. I set up them first, then between c and b.
I've a very basic doubt about database mirroring. I did setup a database mirroring session with the help of SQL Server Management Studio between the server A (db1) and B(db1). When is stop database mirroring by using the command button "Stop Mirroring" available in the mirroring page of SQL Server Management Studio , the mirror database{ B(db1) } goes to state "Restoring...". After stopping the mirroring i'm not able to access the mirror database.
Can you please tell me how to bring mirror database B(db1) to operation mode so that we can start working with that database?
When I try to setup mirror on a SQLserver dbase using windows Authenticated login I get error:-
Login failed for user 'SERVERBAdministrator'. (Microsoft SQL Server , Error: 4060).The login connect string however on selection of SERVERB from SERVERA has a greyed out option for using Windows Authenticated login which clearly shows Username: SERVERAAdministrator.It is odd that the error coming back is showing SERVERBAdministrator on the rejection. (somehow the machines got swapped over in the authentication) The strange thing is if you use the SQLserver studio on SERVERA to connect to SERVERB using the object browser and Windows authenticated login it all works fine without errors. clearly the Mirror software is using some other means/privs of login to establish the connection.
The two machines SERVERA and SERVERB are in the same Domain (DOM1) but they are not using a domain user account.They are using Administrator user on both independent machines. The SQLSERVER install specified both Windows and sqlserver logins. The mirror is to use Windows authenticated login.Is there some login priv we are missing The sqlserver security has allowed this type of login......
Hi guys , I would like to know what's the exactly results able to get in this following scenario.
Server A : Principal
Server M : Mirror
Server W : Witness
1) Firstly, disable server M, following by server W. So probably i will unable to connect to Server A eventhough it acts as a principal.
2) Next, if I enable either server M or server W , what will I able to get actually ? Is it the mirroring works like the article which written in Microsoft page ?(http://www.microsoft.com/technet/prodtechnol/sql/2005/dbmirror.mspx#ETPAE)
At here, I get an error message and unable to continue the mirroring section. ( "Database EMS is enabled for Database Mirroring, but neither the partner nor witness server instances are available: the database cannot be opened." or "Database 'EMS' is being recovered. Waiting until recovery is finished." )
3) If I enable both server M and server W, the mirroring continue to work again.
Can I have any assistance on (2) issue? Thx for the assistance.
I have setup a database mirroring session without witness - ServerA is the principal, ServerB is the mirror,. Each SQL Server instance is hosted on its own machine on sql2005 EE SP2. The mirroring is working correctly. If I submit to server ServerA command:
ALTER DATABASE MYDBNAME SET PARTNER FAILOVER
, ServerB becomes the principal, it means that mirroring works correctly.
My issue is with the SQL Native Client and a front-end ASP application (actually IIS 6.0 site) that needs to make use of this database. I have setup my front-end application to use SQL Native Client and specified the failover server in connection string. Here is the connection string that I am using :
Everything works perfectly on my front-end application when ServerA is the principal. If I execute on server ServerA command:
ALTER DATABASE MYDBNAME SET PARTNER FAILOVER
, ServerB becomes the principal, and the failover occurs correctly on the database side. The problem is that my front-end application is not able to query the database on ServerB. The error appears:
Microsoft SQL Native Client error '80004005'
Cannot open database "MYDBNAME" requested by the login. The login failed.
This behavior my appication till I unload IIS 6.0 pool application. After that my front-end application becomes work correctly with ServerB.
When I swap server, I execute on server ServerB command:
ALTER DATABASE MYDBNAME SET PARTNER FAILOVER,
my IIS 6.0 application automaticly turn back to ServerA without any action on my side.
I am using SQL Native Client last version http://download.microsoft.com/download/2/7/c/27c60d49-6dbe-423e-9a9e-1c873f269484/sqlncli.msi (issued in February 2007). Has anyone experienced this issue? I'm thinking that it's a problem in the SQL Native client
When Create Mirror Database Server, Where need to store the Transaction Log backup file?I took FULL Backup of my Primary Database, and I restored at my Mirror Server also. When I try to create a Mirror Database."The remote copy of database "<db_name>" has not been rolled forward to a point in time that is encompassed in the local copy of the database log. (Microsoft SQL Server, Error:1412)".I am misplacing the Transaction Log backup file. Where I need to store that file?
missing witness server information and the fail-over is broken suddenly? 4:00am no maintenance job. I have one sql job on 10pm for backup on database transaction log only.
I can see the primary have problem then perform fail-over to mirror database, the auto fail-over was broken.
I re-build the sql mirror is OK , but i want to find the root cause.
Windows application event was full when there have many failed event, i have increase log size for application event.
I have three win2k8 r2 servers. 2 are running SQL 2008 r2 and are mirrored. The 3rd server is a witness server. Every so often we get errors and failovers of the mirror. The communication errors are between the witness server and sql servers. No errors between SQL servers. There seem to be no network issues and happen randomly.
Event id 1474 and 1479. The mirroring connection to "TCP://witnesssrv:5022" has timed out for database "DB" after 30 seconds without a response. Check the service and network connections. Database mirroring connection error 4 'An error occurred while receiving data: '64(The specified network name is no longer available.)'.' for 'TCP://witnesssrv:5022'.
I have configured active passive cluster in production environment. And we also have a dr which we have configured with asynchronous mirroring with no witness. Currently active node(node
a) is in sync with dr. When failover happens and the second node(node b) becomes active, the mirror is broken and goes to disconnected mode.
But when we failback again to node a mirror is connected again and is in sync again. In our setup we have active passive cluster and a standalone server as dr.
DB replication can set db recovery model to simple ,why db mirror can not db recovery model to simple.
DB mirror must be set to full recovery model.
As far as I know, whatever db mirror and db replication ,there is a log reader to read the log in the ldf file DB mirror and DB replication are almost the same principle to replicate the db to another db server.
I have created a Endpoint with "Mirroring Server" on the mirroring instance. Due to the keyword server i am not able to drop the endpoint now.
Also am not able to configure a mirror in a windows workgroup also( the two systems principal and mirror are under same network ). I have followed many ways as per msdn articles and other blogs.
I am not able to connect to the mirror server.
I have tried giving the ip addr and the port no, also the computer name:port no, computername.local:port no etc. Both the systems are running on sql server 2008 only
I always get the error as Connection cannot be established to the destination.
(I have also enabled the ports in firewall by creating inbound and outbound rules)
The issue probably lies in NAMING server address i guess.
Hi everybody, I have a mirroring set up for around 30 databases in a 64 bit - 2 powerfull servers scenario - wih latest sp2 + hotfix. Mirroring works perfectly most of the times but when the principal is getting busy during the busy period of the day all of a sudden the processor on the mirror jumps to 100% and stays there for a long time - there are no live databases on the mirror server - all the databases are in mirrored mode. The principal server processor is less than 5% all the time. The network load between the principal and the mirror is also in normal limits. The principal server is dedicated to SQL but the mirror has other things too but the other processes use up maximum 15-20% of the CPU and when I stop SQL Server in one of those moments when the CPU jumps to 100% everything comes back to normal so it's clear that the issue is SQL on the mirror. Any ideas would be greatly appreciated.
I have a 2 node cluster having 4 cores each wherein having 3 instances of SQL 2008 R2 enterprise comprising of 60 databases, 20 on each instance. I need to setup mirroring for each of the databases to a secondary server having 4 cores and 3 instances.
What i understand is that in this case the mirror server will be providing max of 512 worker threads and the 60 mirror databases would consume 240 threads.
What all needs to be checked for looking into the feasibility of going ahead with a async mirror setup as mentioned above.
I'am currently testing a MSSQL 2005 mirroring implementation with automatically failover.
1 principal server ====> Server A 1 mirror server ====> Server B 1 witness server ====> Server C
When server A fails Server B becomes Principal. ( which is the general idea ) This is working perfectly.
The problem is when i try to connect to the mirror Server B ( actually the new principal )
I use the .NET connection string with the failover parameter ( even without the parameter ) the connection fails. ( the general error : unable to connect, or connection property has not been initialized )
Data Source=ServerA; Failover Partner=ServerB;Initial Catalog=DBMTest;uid=dbuser;pwd=dbpassword;
This connection property works fine when server A (original principal) is online.
When i run the SQL profiler with the mirror db as profile, i dont see the traffic.
So you think the mirror server has a network problem or was not connfigured for remote access. i thought that also, but when i create a 'stand alone - non mirrored' database the same application with the same connetion string ( well.....different db) works fine.
The problem must be in the whole mirroring implementation....... ( my idea )
Does anyone had the same problem, or better, doed anyone know how to solve it?
I was trying to test mirroring and now would like to delete the mirror database but it says I need to remove database mirroring first. I deleted the endpoint and cannot figure out how to remove the mirroring. Can someone please help.
Using SQL Server 2008, we would like propose mirroring between two servers of a critical database. Since we initiate, may require to clarify on its purpose and also required changes from application end.Any changes required from OS Level? (I believe both servers IP or Host name should be added in host entries. Mirroring ports should be allowed/open including Principal and mirror server IP Addresses): Windows Team.Any changes required from Application? (Instance name, authentication: user name and its password should be added in web config files): Application Team.Any changes required from Network Team?Also for mirroring both the principal and mirror servers should be with same version, does it only mean SQL Server 2008 versions are enough or does it also mean to say build numbers 10.00.4000 should also be same.URL....
I have a mirred database and have snapshot created from the mirroed database. I can do data selecting from the snapshot. But when the pricipal server is down , I can re-active the mirroed database.( I did succesfully upto this). Then I need to restore the database from snapshot and which failing with following error message.
Code Snippet Msg 5123, Level 16, State 1, Line 3 CREATE FILE encountered operating system error 3(error not found) while attempting to open or create the physical file 'E:sql_datadevitst_mirrorlog st_mirror_log.ldf'. Msg 5024, Level 16, State 2, Line 3 No entry found for the primary log file in sysfiles1. Could not rebuild the log. Msg 5028, Level 16, State 2, Line 3 The system could not activate enough of the database to rebuild the log. Msg 3013, Level 16, State 1, Line 3 RESTORE DATABASE is terminating abnormally.
The article says that once you create the mirror that "At this point, new client connections can be programmatically directed to the latest snapshot."
My question is, how can you programmatically direct connections to the latest snapshot?
Does anyone have a suggestion, or know what the article is getting at? We will use SQL Server Reporting services to query off of the database snapshot.
I am using MS SQL 2000 Standard, is it possible to create a mirror database in SQL 2000? If so, would you suggest how to do this. Thanks! I am a newbie about this.
After adding the Witness Server to the Mirror session, the Witness Connection state between the Mirror and Witness Connection is Disconnected and the state between Principal and Witness Connection is Connected.
The procedures defined in Books Online was used to setup Database Mirroring...when the Witness server was added to the Mirror session, only the alter database T-SQL statement was executed on the Principal server.
ALTER DATABASE <db_name> SET WITNESS = 'TCP://<servername>:<port>'
After executing the above statement, a few seconds later the state between Principal and Witness Connection changed to Connected and the state between Mirror and Witness Connection remains Disconnected.
The Mirror session is not using Certificates, every server is on the same domain, using the same domain login account, and all servers have SP2 installed running Enterprise Edition.
Any idea's why the state between Mirror and Witness Connection remains Disconnected?
While a database upgrade schema changes were being made the Mirror became disconnected will this recover itself when it reconnects or will it be the case that we will have to copy the db files to the Mirror and set it up from scratch.
I tried to setup service broker to fail over to a mirror database. After the target database failed over, the message I send stays in sys.transmission_queue with no error in transmission_status. I check the mirror server log and I see the following.
An exception occurred while enqueueing a message in the target queue. Error: 15581, State: 3. Please create a master key in the database or open the master key in the session before performing this operation.
The database has the master key because its a mirrored database? Did I have to do something extra here
I've been running SQL 2005 Enterprise SP1 for some time. After installing SP2, I miss the "Database Mirror Monitor"-Feature. Where is it? Did MS kill the feature?
