Missing Images In Rendered HTML View
Feb 9, 2007
Hi,
i have a report with an image on the footer. When i view the report in the designer/report manager or export to any format, everythings fine. Now i have a ASP.NET site which makes a webservice call to get HTML output from my report. in this case no image show up. The Url of the image is like that: h**p://servername/ReportServer?%2fDocuments%2fGerman%2fOrder%2fOrderResponse&rs%3aFormat=HTML4.0&rs%3aImageID=ac8c4a8c-8a63-4ff9-ba74-6d6a7076a0ef
When i check the HTML version of the Report Manager the url of the image is like: h**p://servername/Reports/Reserved.ReportViewerWebControl.axd?ReportSession=iuwsgfikvz4ezfmd0tqmyj45&ControlID=cee4d933-5ab6-413f-8c28-4c3a2b3ff230&Culture=1031&UICulture=7&ReportStack=1&OpType=ReportImage&StreamID=84e7491d-eab4-4502-adac-2bec4254da90
I take the byte stream of the report from the RS Service an put it to the HttpResponse of the ASP.NET page.
What could be the problem?
View 3 Replies
ADVERTISEMENT
Nov 27, 2007
We've been struggling for 2 days to try and figure this out. We create a report with images, both in gif and jpg, and then setup a subscription. When the report is generated in both 5.0 and all browser format, no images appear, just the red cross. Funny thing is that in Firefow the same htm document renders OK. We tried setting the configuration table row UseSessionCookies to False as posted by others but this did not work. It seems so simple it's silly. What are we doing wrong? The image is set to embedded. Also the charts are not showing either.
Any help is MOST appreciated!!
BTW, in pdf and mhtml the images are fine
We do not have and _ in the the server name and we have SP2 also installed on a W2K3 server
View 1 Replies
View Related
Jan 3, 2008
If you generate a report in HTML and it then opens a seperate page, if you then press refresh does it refresh the data from the database or does it just refresh the page?
View 4 Replies
View Related
Aug 22, 2005
I'm having problems with what is displayed in the browser being different to what is defined in the RDL and what is exported to PDF.
View 7 Replies
View Related
Jan 16, 2008
Hi everyone,
Our system is set up using SQL Server 2000 and Reporting Services for SQL Server 2000. Our web application is built with Visual Studio 2003, C# and .Net Framework 1.1 and is a 3-tier application. On both our localhost and development builds of the application, the images that get rendered do show up properly. On our live build, the images do not.
One difference that we found is that on the live build, users do not have file permission access to our middle tier that is running reporting services. After examining the URL of where the image is trying to point to, we see that it is trying to access the middle tier from the front presentation tier.
My question is, is there a way to send a certain parameter into the Render method to have the images stored somewhere else? Any help would be greatly appreaciated. Here is the code we currently have:
ReportingService rs = new ReportingService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
try
{
//Response.Write("Format: " + format);
if (format == "HTML4.0")
{
// Render arguments
byte[] result = null;
string historyID = null;
string devInfo = "<DeviceInfo><HTMLFragment>True</HTMLFragment></DeviceInfo>";
DataSourceCredentials[] credentials = null;
string showHideToggle = "true";
string encoding;
string mimeType;
Warning[] warnings = null;
ParameterValue[] reportHistoryParameters = null;
string[] streamIDs = null;
ParameterValue[] reportParameters = null;
SessionHeader sh = new SessionHeader();
reportParameters = new ParameterValue[5];
reportParameters[0] = new ParameterValue();
reportParameters[0].Name = "par_userID";
reportParameters[0].Value = userID;
reportParameters[1] = new ParameterValue();
reportParameters[1].Name = "par_menuID";
reportParameters[1].Value = menuID;
reportParameters[2] = new ParameterValue();
reportParameters[2].Name = "par_URL";
reportParameters[2].Value = reportURL;
reportParameters[3] = new ParameterValue();
reportParameters[3].Name = "par_startPage";
reportParameters[3].Value = startPage;
reportParameters[4] = new ParameterValue();
reportParameters[4].Name = "par_endPage";
reportParameters[4].Value = endPage;
//Clean up old files
RemoveFiles(ConfigurationSettings.AppSettings["tempFileLocation"]);
result = rs.Render(reportPath,
format,
historyID,
devInfo,
reportParameters,
credentials,
showHideToggle,
out encoding,
out mimeType,
out reportHistoryParameters,
out warnings,
out streamIDs);
// // For each image stream returned by the call to render,
// // render the stream and save it to the application root
// byte[] image;
// string optionalString = null;
// string tempFilePath = ConfigurationSettings.AppSettings["tempFileLocation"].ToString();
//
// foreach (string streamID in streamIDs)
// {
// image = rs.RenderStream(reportPath,
// "HTML4.0",
// streamID,
// null,
// null,
// reportHistoryParameters,
// out optionalString,
// out optionalString);
//
// FileStream stream = File.OpenWrite(tempFilePath + streamID + ".png");
// stream.Write(image, 0, image.Length);
// stream.Close();
// }
// Write the results to the current Web page
string htmlout = Encoding.ASCII.GetString(result);
htmlout = htmlout.Replace("<hr/>", "");
rs.Dispose();
return htmlout;
}
View 1 Replies
View Related
Jun 14, 2007
I've created some Matrix reports which work just fine, I'm able to drill down and the expansion images(+/-) appear correctly.
However, after setting Role security on the folder containing the reports(this is an asp.net application), the reports still function but the images for the (+/-) are missing, just getting the missing image icon.
Any ideas?
Thanks, Burl
View 1 Replies
View Related
Jan 10, 2008
Hi all,
Thanks for sharing your experiences here. In some cases, I've saved quite a bit of time. Unfortunately, I haven't found a solution for my current issue.
I'm using VS.NET 2005 and SQL Server 2005. My development computer is running Windows XP SP2. SQL Server 2005 database and reporting services are running on Windows 2003 Server.
My business requirement is to develop and deploy a report which takes rich text (RTF) stored in the database (datatype = TEXT) and converts it to an image at runtime using a custom assembly (source can be found here http://blogs.digineer.com/blogs/jasons/archive/2006/10/03/520.aspx). I am able to generate and view the dynamic image containing the RTF on my local (i.e., developer) computer both using the ReportManager web interface and using the Render method. When I deploy this to our test server, I end up with a broken link image.
To recap, I have taken the following steps.
Created custom assembly using VS.NET 2005 which converts RTF to bitmap image. Custom assembly has a strong name.
On local developer machine
Copied custom assembly to C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssemblies.
Modified C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesRSReportDesigner.config to include a CodeGroup which grants FullTrust to custom assembly based on StrongNameMembership (NOTE: ReadMe.txt doesn't mention adding an entry to this file).
Modified C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesRSPreviewPolicy.config to include a CodeGroup which grants FullTrust to custom assembly based on StrongNameMembership (NOTE: ReadMe.txt doesn't mention adding an entry to this file).
Modified report using VS.NET 2005 as follows
Added reference to custom assembly and System.Drawing.
Added image control with type=Database, MimeType=image/bmp, Value = call to custom assembly method; method is passed value of database field which contains RTF.
Deployed report.
Viewed report successfully both via HTML and via Render method of WebService using EXCEL as output format. HTML for image <IMG SRC="/Reports/Reserved.ReportViewerWebControl.axd?ReportSession=ohj0pjaplbl5h255phlplz45&ControlID=883e299f22ca4413b398a024cec134b2&Culture=2055&UICulture=7&ReportStack=1&OpType=ReportImage&StreamID=ed4b4d3b-d54d-4043-9fea-1c06f153f9a1"/>
On local developer machine and server
Copied custom assembly to C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerin
Modified C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer
ssrvpolicy.config to include a CodeGroup which grants FullTrust to custom assembly based on StrongNameMembership (NOTE: source code indicates permissions should be granted based on UrlMembership).
Deployed report.
Viewed report unsuccessfully both via HTML and via Render method of WebService using EXCEL as output format. HTML for image <IMG SRC="" />
Initially, I got error messages when exporting to Excel along the lines of ,"data is missing" but these appear to have been resolved by granting permissions in .config files which we not mentioned in ReadMe.txt. I've have run out of things to try and am at my wits end. I am convinced the solution has something to do with permissions since this works on my computer but not on the server.
Thanks in advance for any thoughts or suggestions.
Regards,
Bill
View 1 Replies
View Related
May 24, 2007
We currently have reports for a client running on SQL 2000 RS. The strange thing (problem) is that we can see any embedded image in the Report when we Preview it, and view it on our testing server (SQL 2000), but at the client's site (also running SQL 2000) the images don't appear at all. The same goes for any graphs inside the report as well. This is very puzzling as we cannot find out what the problem is. The other strange thing is that we can see the images on the client's site when running them through Report Manager, but when we go through the application using the Reports, then the images do not appear at all. We have no idea of what's wrong. The app is running on 2003 Server x64, the database is being hosted on another server running 2003 Server, and the report server is running on another server running Windows 2000 Server.
Any help will be much appreciated.
View 2 Replies
View Related
Apr 22, 2005
hi...
is it possible to create a trigger on view object....
usually we divide our table in to a smaller pieces and use view to get the big picture of it..
my task is to record any/every select statement on each table.. so logically we create view and is it possible to use trigger(to record the accesses) in view..
please help..
or just give me a link to get that info..
tnx
View 2 Replies
View Related
Mar 6, 2008
Hi All,
I have a solution which is synchronised with visualsourcesafe. Now there are some reports present in the solution, I am able to view the preview of the reports but when I am going to view the dataset definition It is not able to retain its defintion and its becoming blank but this happens to only datasets which were developed from cube and its able to retain dataset which are developed from Database.
Any help would be of great use.
Thanks in advance
Regards
View 1 Replies
View Related
May 9, 2008
Is there a limit on the number of fields that can be displayed in a table object in a data source view in SSAS 05?
One of the tables (the fact table) in my data source view is displaying only 50 fields. The table actually has many more than that. One of the fields that is not displaying is a foreign key that I need to link to a new dimension table. I have tried refreshing the view, but it doesn't bring in any additional fields.
View 10 Replies
View Related
May 23, 2003
I am having a problem with MMSQL BLOB with VB, Sorry to say I am new in Programming using VB 6 and MSSQL and I have never touch BLOB in my live.
I just wish anyone could give me any ideal, like, white pages, or manual on how do I insert BLOB data (Images) to MSSQL 2000 database using VB 6. I need to know exspecially the VB Code and the SQL Portion if you have a store procedure code for that it will be nice.
:confused:
View 3 Replies
View Related
Feb 9, 2007
The URL address is for example http://backup/pics/19980.jpg
On the report when I right click on an image the URL is http://localhost/reportserver
I do not understand what is going on. Please help.
Many thanks,
Nic
View 1 Replies
View Related
Jan 15, 2008
I am retrieving a field from SQL and displaying that data on a web page.
The data contains a mixture of text and html codes, like this "<b>test</b>".
But rather than displaying the word test in bold, it is displaying the entire sting as text.
How do I get it to treat the HTML as HTML?
View 6 Replies
View Related
Aug 2, 2015
I am trying to show images in a product listing in power view.I work with an excel 2013 desktop version based on an office 365 pro account.I did the following steps:
import of an excel file with an article list via power query and loading the data to the data model import jpg images from a folder via power query, setting content as binary type and loading the data to the data modellinking both tables in power pivot--> manage via the image namesetting the table behavior for the images table under power pivot --> manage --> Advanced (e.g. Default Image: Content)opening power view and building article cards with article number and imageProblem: only a camera icon shows up in power view
Is there a solution with a desktop version?Can I use my Office 365 Pro account to make it work? How?Why is there no solution showing images in a pivot table?Link to Dropbox with power pivot files
View 9 Replies
View Related
Jun 30, 2006
Because of some peculiar way of using CSS, the reports aren't rendered correctly in Firefox. I've tryed specifying different rendering options (html 4 for instance) but it didn't help. What are my options on this? I could use Webservices (SOAP) and wrap SSRS in a proxy, but I'd have to parse reports and extract the data and build my own presentation layer. This way I'd be missing half of the SSRS functionality. Any ideas?
View 4 Replies
View Related
Dec 13, 2007
Hi,
I have a popup window that opens a server report in PDF format using URL access and within this report there are hyperlinks to webpages.On clicking the hyperlinks from within the report we get the following error :
"Internet explorer cannot download.Unspecified error".
we have used javascript in the jump to URL expression:
="javascript:void(window.open('http://hostname/p/proj/project.aspx?uid=" + Trim(Cstr(Fields!ProjectUID.Value)) + "','_blank','location=no,toolbar=no'))"
Kindly advice.
View 4 Replies
View Related
Aug 20, 2007
Hi,
I have deployed my report to the report server and send a link to the users to view the report on the browser. But when the report is viewed, it shows up as "restore down" instead of "full screen". For example, the report shows up in the browser with all the information below.
SQL Server Reporting Services
Home > school > hwal> test >
Proficient By Ethnic within School and Grade Rdg and Math
How do I set up the report to make it show up as full screen report without all the details above?
View 7 Replies
View Related
Aug 12, 2007
After resolving all the installation and configuration related issues, I was able to deploy a couple of projects on my report server. I can see alll folders and reports listed inside the folders from http://<servername>/reports . All works fine except when I run a report, the http://<servername>/Reports/Pages/Report.aspx page does not render report.
This page displays View, Properties, History Subscriptions etc, menu items on the top section of the page. It also displays Home, My Subscriptions, Site Settings, Help etc. links on top right corner of the page. I can also see the bar that has "New subscription" button. But the problem starts from the section below that. It does NOT display the Report navigation bottons (like First page button, Next Page button, previous page button, Last page button, print button etc.) Appears that the icons images for these bottons are missing. And above all, the page does not render report.
IE browser status indicate the following error:
error:'HoevrImagectl161_ctl01_ctl01_ctl06_ctl01' is null or not an object.
The report renders fine via http://<servername>/ReportServer/Pages/ReportViewer.aspx
I may not have explained the problem well here however, if you are interested, I can email you the screenshot of Report.aspx to help you understand the problem.
Any help is appreciated!!!
View 6 Replies
View Related
Nov 1, 2007
I want to poll a row on a table:
DECLARE @CNT INT
DECLARE @Q NVARCHAR(1000)
SET @CNT = 1
WHILE(@CNT < 1000)
BEGIN
SET @Q = 'SELECT * FROM table'
PRINT @Q
EXEC sp_executesql @Q
SET @CNT = @CNT + 10
WAITFOR DELAY '00:00:01'
END
The thing is I want it just to run and run in a separate window, while something else is updating this table.
Thing is: it seems to run right to the end and only then produce output.
My question is: how can I get it to print output as it happens, rather than when the script is complete?
View 1 Replies
View Related
Nov 12, 2007
Okay, when i go and preview a report that has columns (my report is designed for printing lables, i'm just pulling names and addresses and placing them in a list text box and 3 columns), the columns do not show. Keep in mind this is in "preview" cause html cannot handle columns.
On the first page, the middle column is blank, then the second page has blank first and last columns, and this repeats throughout the preview. So column 2 is blank, then 1 & 3 are blank, and so on.
I'm wondering if this is a SP2-related thing cause i know SP2 caused the black-preview-renderings (and i fixed that).
I know it's working properly cause i can export to PDF and it's perfect.
So, this is merely a rendering issue (at least so far). Does anyone have any suggestions or any advice to a fix on this? I CAN'T BE THE ONLY ONE? It'd be very nice to be able to preview my reports before they're deployed to the intranet website.
Thanks in advance!
View 11 Replies
View Related
Aug 3, 2007
I have a report in which the jump to URL always works in Preview mode in Visual Studio. However, when I publish it to Sharepoint the link does not seem to want to render.
Most of the time if the link is short like http://server.domain.com it works fine.
When I try ="http://servername/projectcontrols/reports/Pages/PhaseExpenditureBreakdown.aspx?Phase="&Fields!PhaseName.Value as the expression it never works in Sharepoint, but does work in Preview Mode.
If I try ="http://"&Fields!PhaseName.Value then it renders the URL in Sharepoint.
Is there some kind of size limit to the URL?
View 2 Replies
View Related
Nov 5, 2007
Hello everyone, I'm not sure if this has been addressed or not, but there were a few threads on here (after much searching) on this subject where after installing SP2, when you go to preview your reports, the background (which is set to transparent by default) renders black.
Basically your preview for reports comes up entirely black. There was a workaround where you had to change the background color to white, which did work, but the magin areas still blacked out.
I did some more searching online and came across a KB article and requested the hotfix. It's not 100% proof yet, so you have to request it via customer service.
So far it's working for me and no issues yet. I create all my reports via VS2005 and previewing is a vital need of mine. Now the black renderings are gone and everything else is back to normal, at least for now...
http://support.microsoft.com/kb/935436 (last review date: 10/12/2007)
Again, it's not 100% proof, so use at your own discretion. Just wanting to share!
Moderators, if this is a repost, please feel free to delete.
View 1 Replies
View Related
Apr 28, 2008
Env: Microsoft SQL Server Reporting Services Version 8.00.1042.00,
<OSName>Microsoft Windows NT 5.2.3790.0</OSName>
<OSVersion>5.2.3790.0</OSVersion>
Last week a number of reports that were working fine began rendering incorrectly when sent out in report subscription emails - they work fine when directly rendered using report manager. The weird issues include broken alignment (left instead of right), missing borders, and changed fonts.
I checked the report deployment dates and these reports have not changed since well before the issues arose. I am digging thru the event logs to see what might have changed, but has anyone seen this issue before?
TIA,
-Peter
View 5 Replies
View Related
Feb 23, 2007
I have a report that has 3 graphs and two tables that render to 5 pages in pdf. Some users should only get a subset of the 5 elements and some need all 5. When I set the Hidden property (in the designer or via a parameter) for any of the elements they become invisible but in pdf but the report still prints out a page for the hidden element. It works fine in the designer and rendered to html and excel but I get an extra page in pdf. it is like the hidden element still takes up the same amount of space but is just hidden.
Any help would be great.
Greg
View 2 Replies
View Related
Nov 19, 2007
I want to toggle the visibility of a report item in my page footer based on whether or not a particular subreport has been rendered.
The report has 3 subreports. The subreport above the subreport in question can span several pages, so the subreport I want information on can render on page 1 (for a short report) or page 12 (for example) on a longer report.
Is there a way to determine within the main report when a particular subreport has been rendered and is currently visible?
Thanks in advance for all replies.
John
View 4 Replies
View Related
Dec 6, 2007
does RS allow a report to be built such that after user runs it, hovering over a particular piece of info could display some variable piece of info similar to tooltips, intellisense etc?
How about a tip to the user if he/she hovers over a parameter prompt?
View 4 Replies
View Related
Jun 12, 2007
Hi can someone help me please? I browsed through the SP2 install feedback below, but it doesn't quite seem to fit what happened to my install. My .MDF and .LDF files for the system databases are in C:Program FilesMicrosoft SQL ServerMSQL.1MSQLData (I presume this is the correct location.)
I am the local administrator on this box.
I uploaded the .CAB file with all the logs onto www.sendspace.com if it gives you something to go on.
The only other thing of note is that it said there were two machines on the network and that I needed to change my machine name in the control panel when I installed. This doesn't seem right, as far as I understand the computer name is unique.
The SQL Server runs under the local system account, if that is of any use.
I attempted uninstalling and reinstalling the SQL native client MSI package in the hope it would be a simple fix similar to that chap further down the page, but that didn't help at all either.
.CAB file of installation logfiles is here: http://www.sendspace.com/file/7ihoet
kind regards
Jason
ERRORLOG starting SQL Server post failed SP2 install
2007-06-12 19:55:21.94 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-06-12 19:55:21.96 Server (c) 2005 Microsoft Corporation.
2007-06-12 19:55:21.96 Server All rights reserved.
2007-06-12 19:55:21.97 Server Server process ID is 5468.
2007-06-12 19:55:21.97 Server Authentication mode is MIXED.
2007-06-12 19:55:21.97 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-06-12 19:55:21.97 Server This instance of SQL Server last reported using a process ID of 5756 at 12/06/2007 19:36:35 (local) 12/06/2007 18:36:35 (UTC). This is an informational message only; no user action is required.
2007-06-12 19:55:21.97 Server Registry startup parameters:
2007-06-12 19:55:21.99 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-06-12 19:55:21.99 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-06-12 19:55:21.99 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-06-12 19:55:22.00 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-06-12 19:55:22.00 Server Detected 4 CPUs. This is an informational message; no user action is required.
2007-06-12 19:55:22.17 Server Address Windowing Extensions is enabled. This is an informational message only; no user action is required.
2007-06-12 19:55:22.33 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-06-12 19:55:22.57 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-06-12 19:55:23.60 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-06-12 19:55:23.63 Server Database mirroring has been enabled on this instance of SQL Server.
2007-06-12 19:55:23.72 spid5s Starting up database 'master'.
2007-06-12 19:55:24.07 spid5s SQL Trace ID 1 was started by login "sa".
2007-06-12 19:55:24.11 spid5s Starting up database 'mssqlsystemresource'.
2007-06-12 19:55:24.13 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-06-12 19:55:24.29 spid5s Server name is 'GBLOND088SQ8MSQL_CREDS_DEV1'. This is an informational message only. No user action is required.
2007-06-12 19:55:24.29 spid9s Starting up database 'model'.
2007-06-12 19:55:24.30 Server Error: 17182, Severity: 16, State: 1.
2007-06-12 19:55:24.30 Server TDSSNIClient initialization failed with error 0x34, status code 0x1e.
2007-06-12 19:55:24.30 Server Error: 17182, Severity: 16, State: 1.
2007-06-12 19:55:24.30 Server TDSSNIClient initialization failed with error 0x34, status code 0x1.
2007-06-12 19:55:24.30 Server Error: 17826, Severity: 18, State: 3.
2007-06-12 19:55:24.30 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-06-12 19:55:24.30 Server Error: 17120, Severity: 16, State: 1.
2007-06-12 19:55:24.30 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
View 7 Replies
View Related
Dec 13, 2010
I have a tablix report (SSRS 2008) when I render it in excel my client always need to see the row headers as fixed one i.e when he/she scrolls report from row 20 scrolling should begin and always want to see first 20 row and next should be scrolling. Is this possible.
View 3 Replies
View Related
Dec 6, 2006
Hi,
We are trying to move our application from SQL2005 to SQL2005, we are using 2005 jdbc driver 1.1.
The problem we have is, when a date is retrieved from the database, only the year part got correctly, but the date is automatically set to January 1 of that year. The interesting thing is this problem doesn't occur on local development environment (developer's windows platform), it only happens when we deploy the application to production server (unix).
Does anyone know what is going on, how to fix it?
Thanks.
Cathie
View 12 Replies
View Related
Jun 29, 2015
I'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies
View Related
Oct 25, 2007
Hi All,
We have 10 charts in One RDL file, out of these 10 charts 3 Pie charts are displayed dynamically,
Using 'Visibility' property expression in the 'Hidden' sub property as below.
Code Block
=iif(Sum(Fields!Total.Value, "DataSet")=0,true,False)
Which returns 'true' or 'false' for 'Hidden' property.
Each chart has to be displayed on separate page, hence we have set 'PageBreakAtEnd' Property to true for each chart.
Problem:
But, when this RDL file is deployed on report server, these charts are all displayed on single page without any page breaks.
however, when the RDL file is exported in PDF format, the report is rendered with charts on separate pages as expected.
Is there any way to ensure the charts are rendered properly, in report viewer of report server ?
View 1 Replies
View Related
Jul 23, 2005
I am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
View 3 Replies
View Related
