I have a line chart that has several series, and it routinely leaves off 1 or 2 point labels on the last X-axis.
Is anyone else experiencing this? If so, does anyone know what the cause is, and is there a fix?
Thanks!
BobP
I have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies View RelatedI have a pie chart and have tried every option I could find on the Data tab for the point labels. They bunch up all over the place. What am I missing?
Does Dundas do this better?
Jerry
Hi People,
I'm with a new problem.
I creted a simple bar type and sometimes the values of point labels are showing inside of bar, This is a problema, because if the length of bar will be short, the value doesn't shows. How can I make to force the point label value outside of bar ??
Thanks
I've created a chart and I'm using point labels. When I have two series, and the values on one bar of one of the series is zero, the point label for that bar shows up at the same point on the chart as the value for the other series--in other words, it shows up in the middle of the chart rather than at the bottom, where a value of zero should be. Any ideas on how to fix this? It just looks stupid.
Example--sales for customer 1 and 2 for June and July. Sales for cust 1 for June is 5, for cust 2 is 3; point labels show up at the tops of the bars. Sales for cust 1 for July is 0, cust 2 is 6; point label for cust 1 shows up near 5 (where the value for the other month of data shows), and for cust 2 at the top of the bar.
Thanks!
Is it possible to have the value labels always on top of the bars of a bar chart?
On the Chart Series Labels properties under Appearance, I used Top for Position, but if the bar reaches the top of the chart area (and that is determined automaticaly by the Y Axis that and can't be a fixed value).
I have a chart that presently has two groupings on the x-axis: Year & Qtr. I'd like the Year labels to be one color, and the Qtr labels to be a different color. (All year labels should be Black, all Qtr labels should be Blue). I can see that an expression can be written to handle this dynamically, but I'm banging my head trying to figure it out...
Any help?
Thanks in advance,
Pete
Some labels such as 33314 are displaying over the columns. I need all labels to display at the top. How can I fix this without changing the size of the chart?
View 4 Replies View RelatedI am counting order type by a field which can have 3 different values.In a stacked column chart I am displaying the count of those different values, and showing a data label with the count for each order type. See screenshot.
Now I would like to show a line based on the total of each order type. I can see that SSRS already know the number of each order type as it is shown in the labels.
How do I add those numbers (shown in the labels) together and get it into a Total field? I would prefer not to alter my SQL query, if possible.
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select
/* Set Week End date as Sunday */
DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate
+1 AS DATE)) as[WeekEnd]
,count(t.TaskBaseline0FinishDate) as Baseline
,count(t.TaskFinishDate) as Finish
[Code] .....
I developed a rdlc report. I have a graph chart. Sometimes the value of a label can =0. If the value =0 I want to hide the labelname. However, I also have dummy values =0. This is so that I can have spaces between the bars. The dummy values labels isn't shown in the graph. This works great. I need to add to the expression that if the name of the label isn't dummy but the value =0 to hide the labelname.
The data from sql:
Expression in graph under chart data->category groups->category group properties->label:
=Microsoft.VisualBasic.Interaction.SWITCH(Fields!LabelName.Value = "aTotalForRetire", "Retirement", Fields!LabelName.Value = "cTotalForRelatives", "Relatives", Fields!LabelName.Value = "eTotalForDisability",
"Disability")
The result is below. I want to hide the label relatives as in this example the value=0. It will not always be the case. How can I do that?
I am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
View 4 Replies View RelatedData lables in ssrs reports are getting overlapped in stacked chart. Since it is satcked chart i can't place labels outside the bar.Due to this it is not visible clearly. how to avoid this issue?
View 7 Replies View RelatedI can't figure out how to get my line chart to break when there isn't a value. For example, I have a trend line over 4 time periods. The 3rd time period is missing a value. Instead of the line ending at the 2nd period and picking up again at the 4th time period, it's connecting the line 2nd to the 4th period. I'd like it to break and for there to be no line appearing in the 3rd period. I bet that's as clear as mud, but let me know if you have any questions.
Thanks!
sash
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies View RelatedI need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
Hi Guys..
i don't know weather is it possible or not..but Can any One tell's me How can i refresh the Chart Values.. acutally what's happening..
i have two Chart in a reprot .. One is Main Category and other one is SubCategory... acutally what i want.. in Main Category chart sum of Quantities of Subcategory values comes in bar or any other format.. and when i click on Main chart any bar it's refresh the other chart and return the result of subcategory under that main category in details...
i don't know is this possible .. acutally i m very new in reproting.. infact that's my first report.. so i want to do this.. if any article or any help anyone can provide me..
Thanks
Hi,
I am not getting Mining Accuracy Chart and Min ing Model Prediction
Plz tel me how to do.And how to use the filter input data used to generate the lift chart and
select predictable mining model columns to show in the lift chart
Dear fellows,
LOP_BEGIN_XACT, LOP_COMMIT_XACT,
LOP_INSERT_ROWS
Labels as the ones are easy recognizable when you explore LDFS by mean DBCC or whatever but on the contrary the following ones are tricky to reach the meaning:
LOP_IDENTITY_TYPE
LOP_DELTA_SYSIND
LOP_SET_BITS
Does anyone have any link related with this? I tried hard to search by Goog or something like that but unsuccessfully at all.
I have a simple bar graph. All I am looking to do is display the values on each bar. Can someone please help me. Thanks
View 1 Replies View Related
I have a page that is part of a 5 page wizard. The wizard gathers data for a claim filter. The second page is laid out with four labels at the top
Filter Name: <filterName> -- filterName_LFilter Description: <filterDescription> -- filterDescription_LFilter Data Source: <filterDataSource> -- filterDataSource_LFilter Purpose: <filterPurpose> -- filterPurpose_L
--I have written an sp to populate these four label.Text values. I want to populate them on page load.
Two questions. How do I get four output values out of the sp? Is there a better way to do this than an sp?
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
-- =============================================-- Author: <Author,,Name>-- ALTER date: <ALTER Date,,>-- Description: <Description,,>-- =============================================ALTER PROCEDURE [dbo].[a_spNewFilter_Step1_Summary] -- Add the parameters for the stored procedure here @filterID int ,
@filtername varchar(100) OUTPUT, @filterdescription varchar(250) OUTPUT, @filterOwnerID int OUTPUT, @filterDataSourceID INT OUTPUT, @filterPurposeID int OUTPUT
ASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements.SET NOCOUNT ON;
--DECLARE @FilterID int
--SET @filterID = 14
SELECT filterIsComplete, filterCreateDate, filterStep1Complete, filterName, filterDescription, das.AuditorFirstName + ' ' + das.AuditorLastName as FilterOwner, dfds.filterDataSource, dfp.filterPurposeFROM a_factSamplingFilter_2 fsfINNER JOIN dbo.a_dimFilterDataSource dfdsON dfds.filterDataSourceID = fsf.filterDataSourceIDINNER JOIN dbo.a_dimAuditStaff dasON das.AuditorID = fsf.filterOwnerIDINNER JOIN dbo.a_dimfilterPurpose dfpON dfp.filterPurposeID = fsf.filterPurposeIDWHERE filterID = @filterIDGROUP BY filterIsComplete, filterCreateDate, filterStep1Complete, filterName, filterDescription, das.AuditorFirstName, das.AuditorLastName, dfds.filterDataSource, dfp.filterPurpose
END
GOSET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
----
protected void Page_Load(object sender, EventArgs e) {
int filterID = int.Parse(Request.QueryString["filterID"]); /// grab the filterID from the URL query string
string connectionString = WebConfigurationManager.ConnectionStrings["DDT"].ConnectionString; SqlConnection con = new SqlConnection(connectionString);
SqlCommand cmd = new SqlCommand("a_spNewFilter_Step1_Summary", con); // get the values from filter setup step1 cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(new SqlParameter("@FilterID", SqlDbType.Int)); // using the filterID created in step1 cmd.Parameters["@FilterID"].Value = filterID;
cmd.Parameters.Add(new SqlParameter("@FilterName", SqlDbType.VarChar, 100)); cmd.Parameters["@FilterName"].Direction = FilterName_TB.Text;
cmd.Parameters.Add(new SqlParameter("@FilterDescription", SqlDbType.VarChar, 255)); cmd.Parameters["@FilterDescription"].Direction = ParameterDirection.Output;
cmd.Parameters.Add(new SqlParameter("@FilterOwner", SqlDbType.VarChar,50)); cmd.Parameters["@FilterOwner"].Direction = ParameterDirection.Output;
cmd.Parameters.Add(new SqlParameter("@FilterDataSource", SqlDbType.VarChar,50)); cmd.Parameters["@FilterDataSource"].Direction = ParameterDirection.Output;
cmd.Parameters.Add(new SqlParameter("@FilterPurpose", SqlDbType.VarChar,100)); cmd.Parameters["@FilterPurpose"].Direction = ParameterDirection.Output;
con.Open();
try { cmd.ExecuteNonQuery(); } finally { con.Close(); }
///get name, description, owner, datasource, purpose
}
Hi!
I have these tables:
DB1
MID
IIN
Title
FullName
Address
Apt
City
Province
PostalCode
DB2
MID
Lang
Version
How can I output a text file formatted like the one below?
(05) 01046 (F 05)
Mr. Sylvain Cote
123 Sesame Street
Apt 6
Charny, BC
L8T 5G6
where
(05)-MID
01046-IIN
(F 05) - Lang
$3.99/yr .COM!
http://www.greatdomains4less.com
Hi,
We are having trouble getting labels to print correctly when there is a lot of data close together on the labels. These are more than just address labels, so there are many lines, graphics, and borders. Are there additional tools or suggestions for keeping labels consistant?
Thanks
Ok, I'm an idiot. Does anyone out there have some step by step instructions for creating a report that will do mailing labels. I've got multiple columns on my report but I end up with the contents of each column being the same across each grouping/row. In other words for each record read, since I have three columns, I get three occurances of each customer and address until all the data selected for that row is presented, then I go to the next customer which again is repeated across all three columns.
I'm sorry I'm so stupid, but I've looked at other entries on the forum, and I just can't figure it out. We are trying to get out from underneith Business objects thumb and any help would be greatly appreciated. Thanks! - Eric -
Is there a SQL statement that I can use which allows me to set value lables in a result set? For example, if a table has a gender variable with values of 'M' & 'F', can I write a sql statement which creates a result set that changes these to 'Male' & 'Female' so that everything I do with the result set shows the new labels (but does not change the underlying M/F values in the orginal table?
I do not want to create a new table, but rather display the M/F values as Male/Female when I access the result set in an application (such as Report Services).
Thanks for any advice you can give.
Ed Sloat
Hi..
Just want to ask if anyone has encountered the same problem..
I have used the Simple Bar Graph to display the list of employees with the most number of emails/chats and sorted it so that the highest number of emails will appear at the bottom of the graph. The problem is that the graph doesnt display a label on the highest number of email/chats. It displays the number of email/chats that the other employee has and its only the employee with the highest number of email/chats that has no number label. It just wont show and I have no idea now on what to do about it.
Does anybody have a solution for this one?
hi there, i have a payment page which uses javascript to calculate payments and what remains etc. That all works fine, the problem i have is that when you are finished and you go to the next page it should save all of the records to the order table where the order_id = a querystring. Now i have tried using an insert method and an update method, not really sure whats the difference when putting data into an existing record. What happens though is that i can save the contents of labels etc but it wont save the content of dropdown lists (of which there are 2) i just cant work it out, i have posted my code below
string strOrderID = Convert.ToString(Request.QueryString["OrderID"]);
string strDiscountPercent = Convert.ToString(5656);double dblDiscountMoney = Convert.ToDouble(txtDiscountMoney.Text);
string strPaymentMethod1 = ddlPaymentMethod1.SelectedValue;double dblPaymentAmount1 = Convert.ToDouble(txtPaymentAmount1.Text);
string strPaymentRecipt1 = txtPaymentRecipt1.Text;string strPaymentMethod2 = ddlPaymentMethod2.SelectedValue;
double dblPaymentAmount2 = Convert.ToDouble(txtPaymentAmount2.Text);string strPaymentRecipt2 = txtPaymentRecipt2.Text;
string sConnectionStringCustInfo = "my connection string";
SqlConnection objConnOID = new SqlConnection(sConnectionStringCustInfo);
//This is the sql statement.using (objConnOID)
{
objConnOID.Open();
string sqlUpDate = "UPDATE tbl_order SET discount_Percent = " + txtDiscountPercent.Text +
", discount_money = " + dblDiscountMoney + ", payment_method1 = " + strPaymentMethod1 + =========== this is the problem line here!
", payment_amount1 = " + dblPaymentAmount1 + ", payment_ref1 = " + strPaymentRecipt1 +
", payment_amount2 = " + dblPaymentAmount2 +", payment_ref2 = " + strPaymentRecipt2 +
"WHERE order_ID = " + strOrderID;
SqlCommand objCmd1 = new SqlCommand(sqlUpDate, objConnOID);
try
{
objCmd1.ExecuteNonQuery();
}
and because it throws an error it wont update the database with any other record. does anyone have any ideas, i have spent hours last night trying to figure this one out and im sure its simple! but i need some help!
Cheers
Jez
i have an sqldatasource that has a 1 row dataset
how can i read these values to labels?
thanks
I addressed this situation in another thread, but since the thread had not been updated for some time I felt a new thread may have been warranted to included uptodate information and requests for further updates.
I will refresh the topic's primary issue:
When using a matrix, a developer wanted to provide column headers atop the columns to help users distinquish between multiple columns of the same relative data type(columns of digits, etc.)
The space in the upper left corner of the matrix will create a void that cannot be broken down or divided so that a column header label can be applied. It's either one label for the whole void or nothing at all.
VOID
Upper Group Column
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
A poster suggested placing a rectangle inside the voided area above.
Rectangle
Upper Group Column
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
Then placing a series of textboxes within the rectangle area aligned to the width of the row columns
Rectangle
Upper Group Column
rectangle txtbox
rectangle txtbox
rectangle txtbox
rectangle txtbox
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
The problem is that when the report is run and rendered the rectangle txboxes are no longer aligned at the bottom. Even though the text within the textboxes is set to the bottom.
Instead the rendered version appears like this.
rectangle txtbox
rectangle txtbox
rectangle txtbox
rectangle txtbox
Upper Group Column
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
Thus rather than having the labels inside the rectangle textboxes aligned at the bottom so that they appear more in-line with their assigned columns, they are automatically top-justified and this makes the labels look awkward.
So does anyone have any suggestions on how I can get the rectangle textboxes to be aligned adjacent to the tops of the row columns so that their labels appear in-line with their appropriate columns?
Thanks in advance.
I have a horizontal barchart with integer values, both positive and negative. Major gridlines are shown and I have not specified the interval or the label format. Sometimes the gridline labels (Y axis) show decimal values. Is there anyway to format these? I have tried to format the labels as "#0" but then I see labels occuring twice. I have also played with the intervals, but then sometimes, depending on the values, the zero line is not being shown.
Does anybody have an idea?
Thanks in advance!
Joos
I want to line up across the top of a cross tab Jan-12 Feb-12 ... July-13 Aug-13 up to and including the latest month in the db. What's the best way to achieve this?
I currently create crosstabs with case statements as follows:
select
sum(case month(date) when 1 then value) as Jan,
sum(case month(date) when 2 then value) as Feb
from db
I figured you could create some sort of while loop for the case statements but I can't get the syntax right.
Or another strategy would be to use the Pivot method and build [Jan], [Feb], [Mar] etc through a loop?
I am creating a report to be used to print mailing labels. Size 1" x 2 5/8" (3 columns of 10 labels). I seem to have everything but the vertical spacing working properly. I have used a rectangle set to the size of the labels which contains a list box containing text boxes containing expressions to pull in the fields. Some of the street addresses are two lines with the majority being only one line.
I have joined the two fields containing the street addresses and inserted a new line command so each field will print on its own line but yet be contained within the same text box. Everything except the text box containing the street addresses are set to not increase or decrease. My problem is that on the pages of the report where labels vary between the one and two line street addresses the labels tend to creep down which in some cases causes data to be printed over two labels. Any ideas on what I can do to format these to print properly?
Thanks