Missing Data Source....
May 22, 2006
I wanted to demonstrate how SSIS can easily read an Excel file into a database. I started up the wizard (dtswizard) looked and looked by couldn't find "Excel" in the list of datasources. Next I started up the SSIS IDE, found an Excel Destination, and created a flow that errored out on the copy to Excel step.
>>>
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at Package, Connection manager "Excel Connection Manager": An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error: 0xC020801C at Data Flow Task, Excel Destination [666]: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Destination" (666) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "Package.dtsx" finished: Failure.
>>>
I don't understand that message. I suspect the problem is that Excel is NOT installed on the box where I'm running the package. Does that seem right to you? Also, if Excel is needed on the box, how can I develop such a package on a laptop (in the airport) that doesn't have Excel?
Confused, but good!
Barkingdog
P.S. As the saying goes, "I never had this much trrouble importingexporting an Excel spreadsheet in sql 2000 DTS."
View 8 Replies
ADVERTISEMENT
Apr 3, 2014
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
View 4 Replies
View Related
May 9, 2006
I've got a report that is using a cube as a data source and I can't get the report to show all the data. Only data at the lowest level of the cube is displayed. The problem is that most of the data I'm concerned with is at higher levels. There's no problem with the MDX. I get the correct results when I run the query.
I'm using a table to show the results. I've also tried a matrix, but I get the same results. I'm using SSRS 2005 and SSAS 2000.
Anyone have experience with this? Am I missing something simple?
View 7 Replies
View Related
May 9, 2008
Is there a limit on the number of fields that can be displayed in a table object in a data source view in SSAS 05?
One of the tables (the fact table) in my data source view is displaying only 50 fields. The table actually has many more than that. One of the fields that is not displaying is a foreign key that I need to link to a new dimension table. I have tried refreshing the view, but it doesn't bring in any additional fields.
View 10 Replies
View Related
Oct 19, 2007
I have inherited a SSRS setup and am trying to do some clean up. Problem is I cannot see the Data Sources Folder. I am setup as SA and SU on both the RS Server and SQL Server. When I go check the catalog in SQL db it does truly exist as well as a number of data sources in the folder that reports are currently using. How can I see this folder?
View 7 Replies
View Related
Apr 3, 2007
Trying to learn how to use Sql Server CE, Tutorial says to open server explorer, add connection, new connection, select data source as .net sql ce (words to that effect). On my visual studio, it ain't there and I can't figure out how to get it there. I have uninstall all of the Sql Ce stuff and reinstalled it. So I'm missing some key link. What are the magic incantations to get to first base?
Ed Warren
View 4 Replies
View Related
Mar 13, 2008
hi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
View 1 Replies
View Related
Jul 9, 2007
I want to skip running the SSIS data flow task when the source file is missing. We have a scheduler that copies the source file to the staging area. This SSIS package runs as SQL server job. So when a SSIS package fails due to missing file the remaining steps in the SQL scheduler won't execute. I want to handle the missing source file condition grace fully. Please advise.
Thanks in advance.
View 1 Replies
View Related
Oct 23, 2014
I have 2 tables, #MainSample and #SampleCode
In the #MainSample, Line_ID is the Primary key
Line_ID BegMeasure EndMeasure
656 0.00 254500.00
657 0.00 7000.00
658 0.00 308000.00
659 0.00 20000.00
#Sample Code
Line_ID BegMeasure EndMeasure Code
659 665.00 9456.00 APL-XL
657 0.00 200 BHP
From this, I have to find out the segments for which there is no defined code value. I want the output as
Line_ID BegMeasure EndMeasure
656 0.00 254500.00
657 200.00 7000.00
658 0.00 308000.00
659 0.00 665.00
659 9456.00 20000.00
How to achieve this?
View 0 Replies
View Related
Aug 3, 2005
I have a tab delimited flat file with say 60 columns. All columns can have null values. The file contains a blank tab for nulls.
View 25 Replies
View Related
Jun 21, 2007
Hi All,
I want to import a txt file data to a sql server database table, to do this i used sql server import and export wizard. In this when we choose a Data Source, the option Flat file source is not coming up in the combo box in the wizard.
I am using sql server 2005, Management Studio to do this.
steps 1. right click on the database --> all tasks --> import data --> sql server import export wizard --> choose data source dialog box....
please help me.
thanks in advance.
View 1 Replies
View Related
Feb 2, 2008
,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?
Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************
How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));
db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;
dsNew.Update();
2)
RelationalDataSourceView rdsv;
rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));
rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);
DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);
*************************************************************
4)
// Make sure we have the name we thought
dss.Tables[0].TableName = tableName;
// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();
5)
MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";
Add columns:
ScalarMiningStructureColumn smsc;
// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);
*******************************************
6)
MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));
mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);
MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);
mm.Update();
Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.
View 1 Replies
View Related
Mar 2, 2007
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
Thanks in advance
ADG
View 2 Replies
View Related
Jun 22, 2015
I am using SSIS 2014 and installed adapter for sharepoint list source and destination and when I refresh the toolbox I don't see them. Is there a way to manually add them?
View 4 Replies
View Related
May 8, 2007
hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?
thanks for you helps
View 1 Replies
View Related
Dec 11, 2007
Today I was making a few reports.
When I tested the reports in Visual Studio, they worked great: I got the expected result.
But when I deployed the reports to our reportserver the problem started.
When I click on the directory in which my reports are deployed, I got my 4 reports.
Till now everything worked correct.
But when I click on a report to view the results it went wrong.
I got an error:
"Cannot create a connection to data source 'Live'"
(Live is the name of our data source).
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work.
I also have tried it with all the roles assigned on my account, but then it still won't work.
When I modify the data source, and set it to another server en database it works.
The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server.
Maybe that is the problem?
Can someone tell me what is wrong?
View 1 Replies
View Related
May 20, 2007
Hi there,
I'm trying to build a report for Windows Forms (C#) using .rdlc files.
But every time I run it, I get this error message. I've followed the step-by-step from MSDN instructions... but it doesn't work!
Could anyone help me?!
Tks a lot!
Luis Antonio - Brazil
View 1 Replies
View Related
Dec 13, 2007
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?
View 13 Replies
View Related
Nov 10, 2015
I'm using Script Component to load data into Oracle DB due to the poor performance issue. Now, I found it will missing some data during the transmission. Please see the screenshot below:Â
SQL Server：
Oracle:
DDL:
create table Person
(
BusinessEntityID Integer,
FirstName nvarchar2(50),
MiddleName nvarchar2(50),
LastName nvarchar2(50)
);
Result:
I follow up this article:Â [URL] ....
VB Script:Â
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
[Code] ..........
View 8 Replies
View Related
Jan 17, 2008
Hi, Experts
The project is a C/S data analysis system built with .Net 2.0 in windows environment, OS: Microsoft Windows 2003 R2 standard Edition Service Pack2, Database used in this project is: Sql server 2005. As a data analysis system, we need to load large amount of data from file to database, we do it by create a dts package and then do data loading by execute "m_Package.Execute(null, variables, m_PackageEvents, null, null)".
The problem is, we fount that DTS miss some data randomly sometimes, we can't find the rule till now. for example we've data as follows in data file, all data field splited by '|'
11234|26341|2007-09-03 00:00|0|0|0.0|0|0.011470833793282509|1|0.045497223734855652|0|0|1|0|3|2929|13130|43|0|2|0|0|40|1|0|0|0|0|0|1||0|0|3|0|0|0|0|0||0|3|0|0|43|43|0|41270|0|3|0|0|10|3|0|0|0|0|0||0|1912|0|0|3|0|0|0|0|0|0|0|3|0|0|5|0|40|0|9|0|0|0|0|0|0|0|0|29|1|1|24|24.0|16|16.0|0|0|0.0|0|0|24|23.980693817138672|0|0.0|0|0.0|0|0.0|0|0.0|11|2.0764460563659668|43|2|0|0|30|11|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|3|3|0|0|0|0|0|0|0|0|0|6|0|0|0|0|0|6|0|0|45|1|0|0|0|2|42|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|2|0|0|0|2|0|0|0|0|0|0|51|47|85|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|||||||||||||0|0|0|0|0|97.117401123046875|0|0|83|57|||0.011738888919353485|0|1|0.065955556929111481|0|4|||0.00026658669230528176|1|0.00014440112863667309|1|68|53|12|2|1|2.0562667846679688|10|94|2|0|0|30|11|47|4|13902|7024|6878|18|85|4.9072666168212891|5|0.0|0|0.0|0|0.0|0|0.0|0|358|6448|6324|0|0|0|0||0||462|967|0|41|39|2|0|0|0|1|0|0|0|0|0|0|0|0|3|0|0|3|0|0|0|0|0|0|0|0|0|3|0|3|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|46|0|1|0|1|37|0|0|46|0|1|0|1|37|0|0|0|0|0|0|0|0|0.0|0|0|6|4|2|0|0|2|1|0|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|1|0.012290795333683491|0|44|44.0|0|0.0|0|0|0|30|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|2|0|2|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|2|1|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|1|0|0|0|0|0|0|0|0|0|0|0|0|27|0|0|2112|411|411|45|437|2|0|2|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|4|0|4|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|1|0|0|0|0|0|0|0|0|0|0|0|6|6|0|3|2|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|5|5.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|600|600|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|6|0|0|0|0|0|0|6|0|9|1|2|2|3|0|1|0|0|0|0|0|0|0|0|0|0|0|13|3|2|5|1|1|1|0|0|0|102|0|1|1|0|0|0|3|3|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0||0|0|0|0|0|0|0|0|0||||||||||0|0|0|0|0|0|0||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|46.0|46|0.0|0|0.0|0|0.011469460092484951|1|0.0|0|0.0|0|3|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|0.0|0|0|0|0|0|0|0|0|0|0|0|0|0|||0|100.0|100.0|0|1|0|1|0|0|0.02481505274772644|1|0.014951236546039581|1|0|0|0|0|0|0|0|0|0|0|0|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|||0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|4695.5556640625|42260|7126.66650390625|62040|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||||||0|0||||||||||
11213|26341|2007-09-03 00:00|0|0|0.0|0|0.068584725260734558|2|0.14375555515289307|27|0|2|1|11|3966|13162|97|0|13|0|0|83|3|2|3|0|0|0|26||0|0|11|0|0|0|1|0||0|1|0|3|97|98|0|246795|0|11|1|0|3|14|0|0|0|0|0||0|1912|0|0|12|0|0|0|0|0|0|0|12|0|0|17|0|83|2|2|2|0|0|0|0|0|0|0|73|3|1|24|24.0|16|16.0|0|0|0.0|3|0|24|23.905364990234375|2|0.0040000001899898052|0|0.0|0|0.0|0|0.0|11|2.0772171020507812|97|7|0|0|80|10|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|12|12|0|0|0|0|0|0|0|0|0|41|0|0|0|0|0|41|0|0|99|25|0|0|0|0|74|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|2|0|0|0|0|0|0|0|0|0|0|177|158|332|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|3|||||||||||||0|0|0|0|0|0.0|0|0|321|198|||0.041950233280658722|0|2|0.1999288946390152|0|5|||0.00088306842371821404|1|0.00051651173271238804|1|529|113|4|8|2|2.0671226978302002|10|274|7|0|0|80|10|66|17|13934|7024|6910|31|332|4.7173333168029785|5|0.000033333333703922108|1|0.000033333333703922108|1|0.000033333333703922108|1|0.0|0|358|6448|6356|0|0|0|0||0||1609|3423|0|83|78|5|0|0|26|0|0|0|0|0|0|0|0|0|2|0|1|1|0|0|0|0|3|0|0|0|0|2|0|2|0|0|0|0|0|0|0|0|0|0|2|0|0|0|0|0|0.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|65|0|1|0|1|72|0|0|65|0|1|0|1|72|0|0|0|0|0|0|0|0|0.0|0|0|12|7|0|2|3|16|5|5|6|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|2|0.04131799191236496|0|48|48.0|5|5.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|0|0|0|0|0|1|0|0|0|0|0|0|9|0|5|1|0|0|0|1|0|0|0|1|1|0|0|0|0|0|0|0|0|0|0|4|2|1|0|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|3|0|0|0|0|3|0|0|0|0|0|0|0|0|121|0|1410|6046|558|1400|192|2467|10|0|5|1|0|0|0|2|0|0|0|1|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|15|0|10|0|0|0|0|3|0|1|0|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|1|0|0|0|0|0|0|0|0|0|0|0|21|9|12|10|3|1|0|1|4|0|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|163|4|144|91|92|2|92|0|0|0|0|0|101|92|0|0|0|0|101|0|0|0|0|600|596|1|0|0|3|0|0|0|0|0|0|0|0|0|0|0|9|0|0|1|0|0|0|8|0|34|3|4|14|7|2|3|0|1|0|0|0|0|0|0|0|0|0|41|6|4|23|5|2|1|0|0|0|289|0|7|7|0|0|0|11|11|0|0|4|4|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0||0|0|4|0|0|0|0|0|4||||||||||3|0|0|0|0|0|3||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|55.814689636230469|47.931411743164062|48|0.0|0|0.0|0|0.068584725260734558|2|0.0|0|0.0|0|14|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|0.0|0|0|0|0|1|0|0|1|0|0|0|0|0|||0|100.0|100.0|0|26|26|0|0|0|0.088263392448425293|2|0.056161552667617798|2|0|0|0|0|0|0|0|0|0|5|22|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|||0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|16308.888671875|146780|23162.22265625|184840|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||||||0|0||||||||||
11220|26341|2007-09-03 00:00|0|0|0.0|0|0.309184730052948|2|0.17757916450500488|0|0|7|4|18|3925|13682|172|0|19|0|0|164|10|5|4|0|0|0|2||0|0|20|0|0|1|4|0||0|5|0|4|172|172|0|1165085|0|20|4|0|20|8|0|0|0|0|0||0|1912|0|0|24|0|0|1|0|0|0|0|23|0|0|30|0|164|4|6|8|0|0|0|0|0|0|0|121|10|15|24|24.0|16|16.0|0|0|0.0|4|0|24|23.646148681640625|1|0.0040013887919485569|0|0.0|0|0.0|0|0.0|11|2.0849723815917969|172|5|0|0|123|44|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|26|24|0|0|0|2|0|0|0|0|0|192|1|0|0|0|0|191|0|0|190|12|0|0|0|0|178|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|3|0|0|0|0|0|1|0|0|0|0|1008|953|2758|0|5|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|4|||||||||||||0|0|0|0|0|84.418106079101562|0|0|2626|1420|||0.29022222757339478|0|5|1.5045944452285767|0|5|||0.0058597764000296593|2|0.0046600494533777237|2|1340|1114|80|119|27|2.2584490776062012|10|1180|5|0|0|123|44|953|55|14462|7024|7438|52|2758|3.0037333965301514|5|0.021266667172312737|1|0.00036666667438112199|1|0.0|0|0.0|0|362|6440|6880|0|0|0|0||0||13711|27667|0|159|149|10|0|0|1|1|0|0|0|0|0|0|0|0|7|0|0|7|0|0|0|0|4|0|0|0|0|7|0|7|0|0|0|0|0|0|0|0|0|2|3|0|0|0|0|0|0.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|842|0|111|0|102|1702|0|1|842|0|111|0|0|1703|0|0|0|0|0|0|0|0|0.0|0|0|47|26|11|3|7|37|1|20|16|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|4|0.24921548366546631|0|44|44.0|0|0.0|0|0|0|1003|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|10|0|8|2|0|0|0|0|0|0|0|0|0|0|81|1|60|10|10|0|0|0|0|0|0|0|0|0|1|1|0|0|0|0|0|0|0|25|16|4|2|3|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|53|27|17|4|5|0|0|0|0|0|0|0|0|0|421|0|8685|67179|2138|12104|80|26285|104|1|73|16|14|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|87|1|77|7|2|0|0|0|0|0|0|0|0|0|1|0|0|1|0|0|0|0|0|0|0|0|0|0|16|0|9|5|2|0|0|0|0|0|0|0|0|0|155|155|0|105|51|32|9|13|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|1|0|0|0|0|0|0|0|0|0|0|0|5|5.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|102|0|0|0|0|0|600|445|4|20|32|63|16|15|4|1|0|0|0|0|0|0|0|37|0|0|5|0|0|0|32|0|230|7|10|99|68|22|21|0|3|0|0|0|0|0|0|0|0|0|286|18|10|182|53|17|6|0|0|0|2528|0|10|10|0|0|0|22|22|0|0|25|25|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0||0|0|30|0|0|0|0|0|30||||||||||23|0|0|0|0|0|23||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|0.0|45.998283386230469|46|0.0|0|0.0|0|0.30917638540267944|2|0.0|0|0.0|0|8|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|0.0|0|0|0|0|1|1|0|0|0|0|0|0|0|||0|100.0|100.0|0|2|1|0|0|1|0.73375397920608521|5|0.41600942611694336|6|0|0|0|0|0|0|0|0|0|0|0|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|||0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|98115.5546875|865520|176626.671875|1159360|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||||||0|0||||||||||
We found that some of the data field become 'null' after the load action finished, if we load the same data again, problem disappeared, we can't 100% reproduce this issue each time, we don't know why, Anybody here can help us to solve this issue or give us some clue?
View 3 Replies
View Related
Mar 4, 2008
Hello all, I am using the Import Wizard to pull in data from an Excel spreadsheet. One column in particular SQL Server sees as a float data type but it contains varchar data. So I change this in the wizard but some of these values are missing when I select * from Sheet1$ in SQL Server 2005. Any ideas why this would happen? I have formatted the particular column as text in Excel.
View 6 Replies
View Related
Jan 16, 2008
Using Business Inteligence I have created a report that runs off a stored procedure. This report has three parameters. For this example we will say the parameters are A, B and C. parameters B and C can be passed a NULL. The Stored procedure when run on the SQL Server 2005 runs fine and gives me the expected data. I then created a report based off this Stored procedure. If I run the report and pass it parameter A and either Parameter B or C it works fine. If I run the report and only pass it parameter A then I do not get any data. I know the Stored procedure works because as I saind when I run it on the Server it runs fine. So the problem must be in the Report somewher, but I can't figure out where. I have other reports that use stored procedure and some with parameters that I pass a null value to and they work fine. But this one report is not pulling the data.
Has anybody heard of this before or have any ideas?
Any help would be greatly appreciated
Joshua Metry
View 13 Replies
View Related
Nov 7, 2007
I found a big problem. When we do a report it seems to be missing records. I am sure they should not be getting filtered out, given the filter in the report. I ran profiler on the SQL box it was pulling the data from, and it seems that they are all there. If I sort by the ID number of the records, then find the place it should be several are missing. But If I change the filter so that it filters everything but those records they show up. How could adding a filter cause more records to show up?
View 3 Replies
View Related
Mar 12, 2002
Dear all,
I faced a problem. I found all data/records of tables in a few databases were missing yesterday. I don't know what had happened. Can anyone tell me why? Can anyone tell me how to trace the root of the problem. Any log files I can trace? I fear it will happen again. My server is sql2000 and run on win server 2000.
Regards,
Simon
View 1 Replies
View Related
Jun 21, 2012
I have a table of following structure
Time Node
2012-06-15 12:00 Node1
2012-06-15 12:00 Node2
2012-06-15 12:00 Node3
2012-06-15 12:15 Node1
2012-06-15 12:15 Node2
2012-06-15 12:15 Node4
2012-06-15 12:30 Node2
2012-06-15 12:30 Node3
I need a query that will give me a list for which time period which node's data is missing
The table should look like this
2012-06-15 12:00 Node4
2012-06-15 12:15 Node3
2012-06-15 12:30 Node1
2012-06-15 12:30 Node4
View 1 Replies
View Related
Jan 20, 2004
Hello,
I have a sql 2000 database in which reports are generated on a monthly basis from the data inside on of my tables. The reports have been working fine, until some of the rows seemed to have disappered!
I know the data use to be in the table, since it is showing on the old reports, however, when I try to pull that same data, it is not in the database at all.
Does anyone have any ideas on what could have caused this or how I can resolve??
Thxs!!
View 4 Replies
View Related
Jul 14, 2014
I am working with some data that is not so clean. I have some rows that are Very close to being a duplicate row. I need to take all the rows with the same SKU number and fill in the missing data for the Price, Cost or the SalePrice, what ever may be missing. The data is set like @Diamonds MissingData and I need the row to look like @DiamondsWithData table. I can remove the duplicate values once I get the missing data filled in.
DECLARE @DiamondsMissingData TABLE
(
SKU varchar(20)
,VendorNumber varchar(20)
,VendorSKU varchar(20)
,GradingReportType varchar(20)
,GradingReportNumber bigint
[code]....
View 3 Replies
View Related
Nov 4, 2005
I have a billing database with patient names in it. I received a tab delimited file from insurance plan of our roster of assigned patients.
I now want to compare the insurance roster to our database to see who is missing.
The roster is layed out like this (info jumbled to protect privacy):
Eligibility List Sample
Last Name First Name Date of Birth Gender Insured ID VW Acct #
ALLEN CARRIE A4/16/1939FDH36664A572576-02
BAKER AMBER S11/24/1956FFXI2824C596439-02
BARKLOWLOREN R12/15/1956MKVF0092A588878-01
BRENNANPATRICIA A 1/14/1959FFXI8763A549675-02
BROWN MARTHA E8/14/1967FBD65508A366963-02
CALDWELL MICHAEL V 12/19/1969MLR500N2J595087-01
CLARK CYNTHIA A4/24/1971FVO600M8O596011-02
DEMPSTER SCOTT A 2/21/1976MCC85242A573371-01
DUNNE ANNETTE M10/26/1976FAE88375D598423-02
DUNNE CHRISTOPHER M 8/1/2021MBV81536A598423-01
I have loaded the text into an Excel Spreadsheet to work with it.
I was able to query our patient profile data base to get people with this insurance plan...but of course the data is never an ideal match.
For instance, some of the roster patients above have Middle Initials Concatenated to the First Name. In my database it is a mixed bag of missing initials, initials concatenated to first name or initials in separate Middle field. Thus a strict match on name is not going to work.
Date of Birth should hopefully be valid between both data sources.
Probably the best source of data to validate on would be the VW Acct# as I trust this to be the same in both sets of data. However in my patient data base it is buried in a note field preceded by a "Vital Works ID: " and then the number 602659-02. Generally it is the first part of the note field, but there could be additional notes preceding or trailing this Vital Works ID info.
An example of the query I was able to pull from the patient data base is as follows:
LastFirstMiddleDate of BirthGenderNotes
ClarkLawrence J9/7/1955MVital Works ID: 7575-01
ClarkKayleeann NULL1/3/1955FVital Works ID: 7575-02
ColeCodyNULL8/19/1948FVital Works ID: 8771-02 snt ref req to ohms for impact appt tbs Sent ref req back to ohms for Impact-DX.
CreaseyWadeL7/9/1988FVital Works ID: 602659-02
KennyRoyJ2/27/1953FVital Works ID: 602679-02
UttJannieC4/11/1984MVital Works ID: 602715-01
WestAliciaG9/9/1992MVital Works ID: 602736-02
WrightMinnieO2/17/1991MVital Works ID: 602736-03
YankeeDonald E10/27/1996MVital Works ID: 602762-03
YankeeStephana A4/4/2001FVital Works ID: 602762-04
How could I now construct a query that would tell me what patients were in the eligibility roster that didnt have a match in the patient database?
I would like to then save that to Excel or somewhere that I could print it out from so I can have someone up date the database.
Thanks for your help.
View 6 Replies
View Related
Jan 18, 2008
Hi all,
I found problem with my database and was wondering if anyone here could shed some light on the issue.
I have two tables, Absences and AbsenceDates. The first one records the absence of an employee and the second one records a record for each day of the occurance. I do a full select on the second table and I see primary keys that do NOT exist in the select of the second table. so I dug further and here is what I found.
Select * from Absences (rowcount in Query Analyser is: 20883)
Select * from Absences Order By AbsenceID Desc (rowcount is 443)
The second select contains the data that I am missing in the first select. So, I called a friend and they said to run DBCC CHECKDB and I did. The data came back as follows...
DBCC results for 'Absences '.
There are 21337 rows in 243 pages for object 'Absences'.
CHECKDB found 0 allocation errors and 0 consistency errors in database 'EmployeeAbsenteeism'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
now if you add up the rows that the other two selects return it comes to 21326, not 21337. I am assuming that the value that DBCC gets is from sysobjects and that some sort of update would need to be run for it be accurate. This I don't care about too much, what I really need is for my main select statement to return ALL of the data, not just what it feels like returning.
My experience is with programming mainly (6 years in .net) and not DBA, so any help would be greatly appreciated.
Cheers,
Brent
Sorry, this was supposed to go to data corruption forum... reposting..
You should check out www.hogwarts.tv ...
View 3 Replies
View Related
Jan 18, 2008
Hi all,
I found problem with my database and was wondering if anyone here could shed some light on the issue.
I have two tables, Absences and AbsenceDates. The first one records the absence of an employee and the second one records a record for each day of the occurance. I do a full select on the second table and I see primary keys that do NOT exist in the select of the second table. so I dug further and here is what I found.
Select * from Absences (rowcount in Query Analyser is: 20883)
Select * from Absences Order By AbsenceID Desc (rowcount is 443)
The second select contains the data that I am missing in the first select. So, I called a friend and they said to run DBCC CHECKDB and I did. The data came back as follows...
DBCC results for 'Absences'.
There are 21337 rows in 243 pages for object 'Absences'.
CHECKDB found 0 allocation errors and 0 consistency errors in database 'EmployeeAbsenteeism'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
now if you add up the rows that the other two selects return it comes to 21326, not 21337. I am assuming that the value that DBCC gets is from sysobjects and that some sort of update would need to be run for it be accurate. This I don't care about too much, what I really need is for my main select statement to return ALL of the data, not just what it feels like returning.
My experience is with programming mainly (6 years in .net) and not DBA, so any help would be greatly appreciated.
Cheers,
Brent
**** UPDATE *****
I tried running the following sql
select * Into Absences1 From Absences
the results were: (21337 row(s) affected)
now, I did a select * from Absences1
returned 20883 rows.. :(
****** UPDATE *******
I ended up fixing the following way.
Select * Into AbsencesFix WHERE PrimaryKey < 110577
GO
INSERT INTO AbsencesFix ({allfields}) (Select {allfields} FROM
Absences WHERE PrimaryKey > 110577)
Go
sp_rename 'Absences', 'Absences_oldCorrupt'
GO
sp_rename 'AbsencesFix', 'Absences'
Go
This little script did the trick, I can now select all the data in the table.
Hope the fix that was given to me by another DBA friend of mine can help someone out who has a similar problem.
View 2 Replies
View Related
Jan 31, 2007
After loading the BCP files that are created during the trigger/reporting events I've noticed that the data in the table is missingrecords. I've also noticed that the missing records (records in thetable but not in the BCP out files) seem to occur in contiguousblocks. Since the complete set of records exists in the table, Iassume this points to an issue in the way the TableUpdate script/Triggers interact with the system. But i tried to take out the bcpprocedure, do test on trigger, then no data missing, So, I think theproblem is still on bcp part. Could you help me with that?CREATE TABLE [EventUpdate] ([id] [int] NOT NULL ,[eventid] [int] NOT NULL ,[sequenceid] [int] NOT NULL ,[UpdatePass] [int] NULL) ON [PRIMARY]GOcreate trigger trgEventUpdate on EventLog For Insert,Update asinsert into EventUpdate (id,eventid,sequenceid) select ins.id,ins.eventid,ins.sequenceid from inserted insbcp script:bcp "select a.* from w..eventlog a, w..eventupdate b wherea.eventid=b.eventid and a.sequenceid=b.sequenceid and b.eventid<>-1and b.sequenceid<>-1 and b.updatepass=1" queryout 30sec-%TFN_NOW%.wrk -U <userwithaccess-P <password-S doserver -f EventLog.fmtThanks in advance for your reply!
View 3 Replies
View Related
Aug 18, 2006
I am working with a database containing time series data. In many, cases there is missing data. For example, while there might be a value for 2001-01-01T23:00:00, there is none for 2001-01-01T23:0100 (one minute later). I would like to replace the missing data with data from the previous record (if the previous record is the same date). Is that possible with T-SQL?
View 6 Replies
View Related
Nov 21, 2006
I am using Transactional Replication as a backup for our main database. The subscriber database however is smaller than the original database. Is there something that I'm missing? Is the subscriber missing data?
View 6 Replies
View Related
