I have a problem concerning parameters on subreports.
My main report contains a list of meetings. You can click on any meeting name for a drill-through to get a detailed subreport of that meeting.
Now I wanna give the user the possibility to enter some parameter values for that subreport, before the subreport opens.
But I get an error message that my parameter value (for the subreport) is missing.
The funny things is, that when I open the main-report in Visual Studio everthing works fine. I drill-through to the subreport and I'm asked to enter a parameter value (parameter pane) for the subreport which shows up right after that.
I also tried to build a work-around by adding the parameters for the subreport in the mainreport and passing them.
This worked, but when the subreport shows up the parameter pane is always faded out, so that the user can't see which parameter value is used or can't change it. Is there a possibility to always have the parameter pane "on"?
I have created a menu report listing available reports and am setting the Jump to settings of each text box in the list to take the user to the relevent report. But I am having a problem setting up drill down to reports with multivalued parameters.
What I want to happen when the user drills down is for the report to open up with no parameter values selected. This works for single value parameters where I have set Null as the default value. But I have not been able to figure out how to do this with MVPs. Does anybody know if this is possible?
As a workaround I have been using Jump to URL (rather than Jump to report), which has no problem opening the report without having to pass any values for the MPV. But I do not like using this as I use different DEV/UAT and PROD environments so would have to amend the URL for each environment.
Seems like this should be possible... Any idea?
Cheers, Mike
PS: I should add I can Jump to reports with MVP without specifying a parameter in development studio but not when the report is published.
I have a main report that drills-through to a secondary report. The main report has parameters which can be selected (Dairy, Frozen, Fruits, etc.). If I make a selection (let's say Fruits) the second report displays just Fruits information (as would be expected).
However, when I select 'All' from the parameter, on the Main report, and then click to drill-through, the passed parameter is the first selection below 'All.' I cannot seem to pass 'All' to the second report.
What am I doing wrong?
Thank you for the help.
-Gumbatman
p.s. The datasets are based on an Analysis Services cube.
Does anyone know a way to force RS to not collapse the parameter area on a drill through? I searched this forum and found some related threads but nothing that covered this.
I have several reports where they drill through to each other and in all cases, while they pass the parameters between, the users usually want to go directly to different products or time periods within the reports. They constantly have to expand the input area every time they go to another report. This confuses a lot of them.
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
Could any body tell me as to how I would be able to pass report grouping in drill through report.
Please review the diagram below to better understand my problem
Report 1 (Summary) Columns1 Column 2
Row-1:Grouped by attribute X Calculation based of dates Calculation based of dates Row-2: Grouped by attribute Y Calculation based of dates Calculation based of dates
The Drill thru option should be present in all of the columns; so that, when any of the numbers in the column are clicked it should drill through to another report which should show all the records pertaining to all the values in X1
Report 2 (Details) Report 3 ((Details) X1 Y1 X2 Y2 X3 - X4 - X5 - - Yn - - - Xn What I did so far was to pass the report parmeter in report 1 as "Fields! attribute X ,Value" and same for Y The problem with is that only the first value of the group that satisfies condition gets passed on to the detail reports. Kindly let me know were I am going wrong and what should I be doing. Awaiting your opinions Thanks and Regards GM
I have two reports in my project. One is summary and the other is drill through. In Summary report I have StartDate and EndDate Parameters which are DateTime type. Language settings on my workstation are set to Canadian English, and so are in the IE. When I deploy the reports to the Sharepoint WebParts based reporting portal, the reports run fine individually. However, when I try to drill through from summary report to the detail report, the following error is displayed, where the StartDate is 13/07/2007 (Canadian format dd/MM/yyyy):
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
Why do the reports run fine individually? Obviously something is wrong with Report Server processing the parameters, that it converts the date format to US English only when passing parameters to drill through report. This problem is eliminated when I change the language settings to US-English on my workstation.
Any ideas how can this be fixed, if at all? It would certainly be not feasible to have all the users change their settings from Canadian to US-English.
I am experiencing some issue with drill through report parameter not getting selected some times.I have two reports parent and child. Both reports have total ten parameters and all are cascading parameters with multiple selection. The report, when drill through to child, first eight parameters selected as it in the parent report.But the ninth parameter not get selected with the default value which from parent report and the parameter populated with values.
The first two parameter type is  date time and rest of them are text and all text type parameters available and default values are populated by query (Data set) only.
I have two reports 'Product Details' and 'Sales by Product'
When i click on 'Product ID' field in 'Product Details' report, It has to drill through to 'Sales by Product' which has a parameter 'Product ID' in it.Â
I have a report parameter with Allow null value checked (and also Allow blank value). The report works as expected when viewed in Visual Studio, i.e. if I don't supply a value for the parameter, the report still renders. However, when I try to view this report through the web ReportViewer I get the error message "The X parameter is missing a value". It works fine when a value is supplied but I want that parameter to be optional.
I have created a child report with hidden parameter. When I call this report from the Master report using a link, I am getting error 'the xxxx parameter is missing a value'. From, master report, if I click a value, it should take that value to child report where it filters for that value and should display the child report.
I've got a completely goofy problem on one development machine running Vista, SQL 2005 sp2, and Orcas Beta 2. I'm calling a stored proc from within my C# and my ExecuteDataReader() command fails saying I'm missing a parameter (which I'm not).
The c# looks like this:
if (SqlContext.IsAvailable)
{ using (System.Data.SqlClient.SqlConnection cnx =
new System.Data.SqlClient.SqlConnection("context connection=true"))
{
cnx.Open();
using (SqlCommand xCmd = new SqlCommand("dbo.TestMe", cnx))
The result is a an exception that looks like this:
A .NET Framework error occurred during execution of user-defined routine or aggregate "StoredProcedure1":
System.Data.SqlClient.SqlException: Procedure or function 'TestMe' expects parameter '@myParam', which was not supplied.
If I run the SP from the Sql Workbench, it looks fine. Any ideas? I just repaved SQL and Orcas on this machine to see if I can fix the problem -- no luck.
For display a Field Dataset in my header i created a parameter with that field using "From query" in parameter window and then showed the parameter in the header.
All works fine but when the dataset returns nothing i receive the error "parameter is missing a value".
How i Can show fields of my dataset in the header without this problem?
I'm receiving the "Parameter is missing a value" error message while testing my report. I have five parameters, two of which are hidden that gets prefilled from the query below. The hidden parameters are DatatechClient and DatatechProduct. SELECT ClientNameProduct, DatatechClient, DatatechProduct FROM V_TranslationTable WHERE (CMRNum = @Cmr) AND (AcctNum = @ClientNum) Three parameters are shown and the report works fine as long as the CMRNum and AcctNum is found in the V_TranslationTable however, the error generates when they are not found. I looked through the other threads in this forum that deals with "Parameter is missing a value" but it didn't appear to be a solution shown. Thanks in advance for any assistance you give.
SQL server 7.0 running Service Pack 2.0 has some DTS packages on it. A user puts service pack 3.0 on his workstation. Now we cannot open the package. We are getting the Parameter is missing errror message. I remember somewhere you go and change a binary setting. Does anyone know how we can fix this?
Here's my situation. I've got a report with some report parameters defined. These parameters get their available and default values from a query. I've got a Dataset and respective fields selected. The dataset in question is sort of a "headings" dataset, which only ever has one row. Now this works just fine when I'm previewing the report in designer, grabs the value, uses it as I'd expect. The problem is occuring when I'm using the WinForms ReportViewer control to view my report.
I'm not deploying this report, but running it client-side in the WinForms ReportViewer control. I'm providing it with the relevant datasets, bound appropriately (I can pull data from the fields directly in the report just fine), but when I try and view the report I get "The 'xyz' parameter is missing a value".
What's going on here? The definition seems acceptable as it works fine in designer, and my execution using the WinForms ReportViewer also seems to be correct, as I can use the fields otherwise. It just falls apart on the parameter default value from a query.
I'm using MSRS 2005. I have created a drillthrough report using parameter. If I try to execute locally it works fine. I am able to call sub report from the master report by passing parameter. But, If I rey to access the report after deploying on to reporting server, I am getting error patameter xxxx is missing a value. What could be wrong? Please help
I have an issue where I need to set a whole bunch of internal parameters' values to the result of a dataset first executed with the report...nothing new or majestic about it.  The problem is that the 'First dataset', under some parameter values, return no records..it is empty (which is fine). But this meas that these internal parameters error my report as the 'NEED' a value even though I have specified a default, I still get the 'Paremeter X is missing a value' error. I just want the other datasets, which are reliant on these erroring parameters to either execute with parameter values of 0 or not execute at all. Thus I want the sub datasets to return with blank data in this case or not execute at all.  How can I achieve this?
I have set up a report with a field in a list as a link to another report . I am passing all the parameters in correctly (4 parameters : 1 from a field value and 3 from parameter values). When I run the report and click the link, it jumps to the other report but one parameter is missing a value - the parameter I got from the field value. I really don´t know why this is happening as it was working fine until I added another parameter to the reports and suddenly it doesn´t work anymore.
Is there a limit on the number of parameters I can pass or something?
Report X passes all it's parameters to Report Y via a "jump to report". Report Y then populates a select box based on the parameters passed to it. The user selects one of these values and clicks "View Report". This works perfectly in the development environment. But when I deploy it to the server I keep getting an error when I click the link that jumps to Report Y.
Here's the error: "The 'B' parameter is missing a value"
The problem is.. I don't want to pass the B parameter to Report Y. I want the user to select this from a list. I'm very confused as to why this would work in the development envionment but not when deployed.
Hi, I am using Microsoft.ReportViewer.WebForms ver 8.0 to display rdl reports in a web page. I'm using VS 2005 with service pack 1. I set ReportServerCredentials using a custom class that implements IReportServerCredentials. It exposes NetworkCredentials using a valid admin user account. I am setting report parameters from code as:
I find that when I run the page with reportserver credentials set, the parameters are not passed to the report and I get an error message, "Parameter, XXX is missing a value". I can see what parameters were sent by setting ShowParameterPrompts to True. When I remove the credential settings,the parameter values do get set but the report throws the following error on execution:
Execution '2su5vg55juj253455rodai55' cannot be found I have checked that my web project is using Kerberos authentication and not NTLM. Has anybody faced a problem like this? I would appreciate any help. Thanks Supriya
after migration my project to CF 3.5 and SQlCe 3.5 I got the following error message:
System.Data.SqlServerCe.SqlCeException - A parameter is missing. [ Parameter ordinal = 1 ]
I'm using the same code:
Public Sub Update(oSqlCEConn As SqlCeConnection, oSqlCEAdapter As SqlCeDataAdapter, dt As DataTable) ... Dim cmd As SqlCeCommand = New SqlServerCe.SqlCeCommand cmd.Connection = oSqlCEConn cmd.IndexName="UK_IVCTAMOBILE" cmd.CommandText="INSERT INTO IVCTAMOBILE(PKey,Status,Dfu,Lu,BusinessModified,BusinessModified_T,IvcTAMetaPKey,InitiationDate,IvcMainPKey,Accounted,Amount,SdoMainPKey,BpaMainPKey,PaymentMethod,InitiationDate_T) VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)" oSqlCEAdapter.InsertCommand=cmd oSqlCEAdapter.Update(dt) ... End Sub
I migrated the Database with this program:
Public Sub Upgrade(DB) Dim sPath As String Dim engine As System.Data.SqlServerCe.SqlCeEngine sPath = System.Reflection.Assembly.GetExecutingAssembly().GetName().CodeBase sPath = sPath.Substring(0, sPath.LastIndexOf("")) engine = New System.Data.SqlServerCe.SqlCeEngine("Data Source=" & sPath & "Test.sdf") engine.Upgrade() MsgBox("Finished") End Sub
CREATE SESSION MINING MODEL test ( HCVS_MemberId Text KEY, HCVS_MeasureDate_Float LONG KEY TIME, HCVS_MeasureDate Date Discrete, SysPressure LONG CONTINUOUS PREDICT, DiaPressure LONG CONTINUOUS PREDICT, Pluse LONG CONTINUOUS PREDICT ) USING Microsoft_Time_Series ;
How do I specify that I would like to Mean to fill the gap of missing values?
Can u help to to solve my problem . Many time this question arised in the forum no one answer to me to find out the solution for my problem. So please help
I am using report builder thru LocalHostReport . I want a drill through report by using Report Builder and cube . I created the report but unfortunatly I cannot create a drill through report using parameters .How can I pass parameter in report1 to jump into report2 .
When I running the report after giving drill through properties in report the following error will occure.
'The 'DrillthroughSourceQuery' parameter is missing a value
How can I create a report using parameter for drill down in report builder
I'm using an objectDataSource connected to a strongly typed dataset to populate a GridView. I want to be able to show all the records, or let the user to select only those records that expire in a certain month. The expire field is of type date I'm used to all records being returned when a parameter is missing. If I have Select * from table where last=@last, only the records where the last name is 'Smith' will be returned if @last = 'Smith', but all records are returned is @last = "". But that's not how it's working with the date. I'm passing an integer from 1 to 12 in a querystring. I have the equivalent of select * from table where (MONTH([AD ENDS]) = @month)MONTH(datefield) always returns an integer from 1 to 12. If @month is empty, I want all the records to be displayed, but nothing is. If @month is an int form 1 to 12, it works fine. How can I get all the records if no month is selected? Can I have two objectdatasources and programmatically select which one populates the gridview depending on if I want to filter the data or not? Diane
I designed an rdlc file to be used with ReportViewer in an ASP.NET page.
The data source I used was an Object DataSource.
When I placed the ReportViewer control on the page, an ObjecrtDataSource control was added too. I configured it for the parameters the report will receive. The first string parameter is named PRO_DES, which has a default value of "" and the data come from request.Form.
When I run the report in the page, the following error appears:
The 'PRO_DES' parameter is missing a value
PRO_DES parameter, since it is a string, could be empty.
I tried to set a default value, but the same message appears.
DataSource is correctly attached to the report, so I don't know where the problem can be.
I would like to have a parameter on my report to Select by Order_Taken_By. My attempt at that is here:
Dataset called OrderTaken:
select distinct SO_Header.Order_Taken_By from SO_Header Under the report Parameter Properties named @Order, under Available Values Selected "Get Values from a query"
I have DataSet: OrderTaken
Value Field: Order_Taken_By Label Field: Order_Taken_By
The values of the field Order_Taken_By is all text characters, no integer values.
Running the inital Query by itself yields results. When I add the parameter, I can make a selection, but now I get no results, even though there should be values for the choice I've chosen.
I am passing the partameters to MS Report Viewer control to view the report. It is working fine with normal parameters like 'abc', 'Jon' etc. But fails with parameters having special characters like 'abc+', 'Version 1.1 Part 1', 'R1.8 RC' throws error " The parameter is missing a value"
Is it possible to force a build to fail when a stored procedure in a project calls another stored procedure with one or more required parameters missing. E.g.: Â CREATE PROCEDURE [App].[ServiceUser_Save] @userID int-- Param #0 ,@serviceuserID int-- Param #1 ,@version int-- Param #2 etc...
And then in a separate stored procedure we have the following
I have a cube that I created in AS2005, I have a hierarchy and drillthrough action defined. When I create a pivot table in Excel based on that cube and I try to drill down on the cell in the pivot table I can not drill down to the next level. I get an error message: Cannot show or hide detail for this selection. My hierarchy is based on Dimension Facility. Facility State is root level, facility zip is next level. When I'm in AS2005 and browse the cube, I'm able to drill down and drill through and see the hierarchy just fine. (Also, I find interesting that when I create a cube in excel, based on a two relational tables, I'm able to drill down. ) I have the Analsysis Services Add-on installed on my machine, so I have the Cube Analysis Menu item. But I can't seem to even drill-through. So, for now all I want to know is why can't I drill-down (i.e. double clicking on a cell and having the data related "explode" in the spread sheet) like it shows in the article written by William Pearson, titled September 12, 2005 Introduction to MSSQL Server Analysis Services: Reporting Options for Analysis Services Cubes: MS Excel 2003 and More. Any help is greatly appreciated!! Queen
