Hello,
I just installed the enterprise edition of MS SQL Server 2000 in model database there are no store procedure. whereas in MS SQL Server 7.0 there are 18 SP so when I create the new db there is no SP only the one which I've created. Is it normal or did I miss something in installing
Thanks
Rea
Running 2005 Beta 3 Refresh. When I first deploy, it works fine. Subsequent deployments yield the following error:
View 9 Replies View Related I need to develop a language specific dwh, meaning that descriptions of products are available from a SAP system in multiple languages. English is the most important language and that is the standard. But, there are also requirements of countries that wants productdescriptions in their language.
Productnr Productdesc Language
1 product EN
1 produkt DE
One option is to column the descriptions, but that is not very elegantly. I was thinking of using bridge tables to model this but you have to always select a language in a filter (I think)..
I'm thinking of a technical solution, such that when a user logs on, the language is determined and a view determines whether to pick a certain product table specific for a certain language. But then I don't have the opportunity to interchange the different language specific fields in a report (or in my case PowerPivot).
We have the following scenario,
We have our Production server having database on which Few DTS packages execute every night. Most of them have Bulk Insert stored procedures running.
SO we have to set Recovery Model of the database to simple for that period of time, otherwise it will blow up our logs.
Is there any way we can set up log shipping between our production and standby server, but pause it for some time, set recovery model of primary db to simple, execute DTS Bulk Insert Jobs, Bring it Back to Full recovery Model AND finally bring back Log SHipping.
It it possible, if yes how can we achieve this.
If not what could be another DR solution in this scenario.
Thanks Much
Tejinder
Hi all,
I have MS Time Seeries model using a database of over a thousand products each of which has hundreds of cases. It amazingly takes only a few minutes to finish processing the model, but when I click Mining Model Viewer to view the models, it takes many hours to show up. Once the window is open, I can choose model for different products almost instantly. Is this normal?
hi !!i have a question about the connected and disconnected model to access the Sql server DB.......i know that there is better to choose one rather than the other in some situantions and there is no better model in all cases...... os i hope you can help me to decide what shall i choose...i will use the DB to connect to Web services and read data from the DB and wrtie some data back.......i do not know that to use ..... i hope you advise me and tell me about the rules that will allow me to choose what model to choose .... i appreciate your help!!Thanks !!!
View 2 Replies View RelatedI get the following error when I try to load the mining model in the mining model viewer
Query (1, 6) The '[System].[Microsoft].[AnalysisServices].[System].[DataMining].[NeuralNet].[GetAttributeValues]' function does not exist.
I get a similar error when I try to load the Load Mining Accuracy Chart
Failed to execute the query due to the following error:
Query (1, 6) The '[System].[Microsoft].[AnalysisServices].[System].[DataMining].[AllOther].[GenerateLiftTableUsingDatasource]' function does not exist.
I have OWC 11 installed. What am I missing here?
Thanks
Hi,
I'm new in SQL server DBA and in my company. There are about 40 applications in my company and since there's no DB document available, my boss has asked me to prepare a full documentation package about DB schema of each application. I'm going to use RUP method for that but I'm not sure of including which information in the package.
Any idea is appreciated
hi
I have changed the initial size of the model DB , now I want to change it again , but I want to make it smaller than the one it is currently can i do that
When I go the EM & try changing the file size it says :-
The new DBFile size must be larger than the current size
Regards
aki
Hi there,
My problem is : No de system stocked procedure in the system db "model".
What should I do to visualise theses sp.
any help will be appreciated.
Thanks in advance
SQL Server 2000 SP3.
Prior to SP3 the recovery model was switched to simple during transfer (Copy object task) and changed back to the previouis setting after DTS was complete.
Nice thing because performance was increased and T-Log was keep small.
Now I assume that the recovery model is switched to bulk-logged causing the T-Log to explode, to be onest not in all my databases.
1.Is my interpretation regarding recovery model correct?
2.Does anybody knows the reason of this change?
Any suggestion is really appreciate.
Thank you very much - kind regards.
Hi there,
My problem is : No de system stocked procedure in the system db "model".
What should I do to visualise theses sp.
any help will be appreciated.
Thanks in advance
Hello,
I'm new to MS SQL Server I want to know which recovery model is good, Full or Bulk Logged as I'm doing full backup at 11:00 PM and diffential Backup at 12:30 PM and from 8:00 AM to 6:00 PM 15 min log backups.
Please guide me which recovery model should I choose.
Thanks
Lara
Hi all,
I need some sugestions from all of you about setting up security model in
our SQL2000 box.
The server was setup using Mixed mode. However, all the applications
(web and MS access) access the server using "sa" userid.
There are several databases in our server. Ex: (DB1,DB2,DB3,DB4 and DB5)
Application 1: need read/write access to DB1,DB2 and DB3
Application 2: need read/write access to DB5
Application 3: need read/write access to DB4 and DB3
Should I set up three userids and give them the dbo access to those
database that they need to use?
Does that make any sense to you?
Thank you for all your suggestion
Hello, i have no specific problem but i just want to know your opinion on the issue. Last week I tested my recovery scenario and after installing new server i successfully restored master db. Then I tried to start server, but it wouldn't come up because physical path of model db in master..sysdatabases table didn't correspond to the actual location of db on new server, so that tempdb couldn't be created from model db on server startup. I started server without recovering dbs with exception of master using trace -T3608. Now I hoped that I could restore model using MOVE clause but it gave me error saying that restore operation needs to use temporary table in tempdb. To break this vicious circle I used model db files from installation CD and put them to the expected location. After two restarts server accepted the files and I went on restoring msdb and user databases. But I'm sure I must be missing something and there must be better way to do this but i haven't been able to find anything relating to this problem. Thank you for your input. mojza
View 1 Replies View Relatedattempted to move my Model and msdb database files to a different drive on the server. I did the following:
* Restarted SQL Server 2K with the -T3608 startup parameter
* successfully detached msdb and model DBs
* moved the msdbdata.mdf, msdblog.ldf, model.mdf and modellog.ldf
files to their new homes
* successfully reattached model and msdb
When I take away the -T3808 startup parameter and restart SQL Server, I do not see the model database in the db list in enterprise manager eventhough my 'attach' seemed to work. Now I get the following error when i try and query against the Model database using query analyzer:
"Could not locate entry in sysdatabases for database 'model'. No entry found with that name. Make sure that the name is entered correctly"
Also, when I look in the sysaltfiles table in Master, I see no reference whatsoever to the Model DB
What did I do wrong?
What would be the best Recovery Model for: a database which is 4 gig in size and imports via MSAccess queries and also stored procedures approximately 400,000 meg of data each month (and some other update queries are run against it) and it is also queried off of for totals on weekly basis?
The problem is that the SQL Server box only has 512 meg of memory and the tranlog on this database grows tremendously each import and when update queries are run against it. This tends to slow things down a bit on our other databases. We are getting a new SQL Server box but until then, what would be the best recovery model? I currently have it as Bulk-Logged and allow the tranlog to grow by 10% (with a base of 250 meg). The tranlog grows to up to 5-10 gig and in order to shrink it, I have to change the recovery model to Simple, and then back to Bulk-Logged in order to shrink it (I've tried all the dbcc shrinkdatabase, dbcc shrinkfile, dbcc showcontig, and dbcc checkdb commands as well as BACKUP LOG dbName WITH TRUNCACTE_ONLY and nothing will shrink it unless I change the recovery model to simple.)
hi guys,
i have the following category table...
CREATE TABLE [dbo].[categories] (
[cat_id] [int] IDENTITY (1, 1) NOT NULL ,
[dModified] [datetime] NULL ,
[dCreated] [datetime] NULL ,
[cat_parent_id] [int] NULL ,
[cat_lft] [int] NULL ,
[cat_rgt] [int] NULL ,
[cat_image] [varchar] (255) COLLATE Latin1_General_CI_AS NULL ,
[cat_sort_order] [int] NULL
) ON [PRIMARY]
GO
i now wish to add a levels column which indicates (funnily enough :)) which level each record is on starting from 1.
is there a query i can use which will output for me the levels based on the child/parent relationship?
regards
mike
I try to create relational database but i cant develop a model. after i create a database i will create an OLAP cube for my project.i dont want to complex model but i cant create a simple database. it may be marketing, CRM or another. i dont know what fields and tables i should create. i saw sample databases such as northwind and foodmart but i must create original database for my project. please help meeeeee
View 1 Replies View RelatedHi,
I am finding nice examples data model of CMS. Do you know any link to data model phorum or any link to data model examples(nice)?
Thanks
Why would we need to know the data model to write queries?
Sorry but its been a long time since I've worked with databases and I don't remember!
Could anybody lead me in the right direction please?
Why would we need a data model to write queries?
Sorry but its been a loong time since I've worked with databases and I barely remember.
Could anybody lead me in the right direction please?
Thanks.
I can't understand what is diff between simple & bulk-logged recovery
model
Hi,This question has been bothering me for some time. A lot of peopleseem to "think" XML is the king of data problems, and I've heard thatnext version of SQL Server is going to have a strong XML flavor,meantime, I seem to get the impression that a large number ofhard-core relational model gurus do not seem to be that impressed withXML (technical value of this extra layer seems to be limited whilebusiness value might be substantial for instance, more software work,more disk space requirement etc. etc.). What's your take on this?Generality or specifics, all welcome. One specific question is, howcan XML supplement relational model?Thanks.
View 12 Replies View RelatedI'm creating report model using named queries. Is it possible to specify parameters?
View 3 Replies View RelatedHi,
When i create a new table in Model database how can i automatically create table in other user databeses. Thanks for your answers
Hi
I am new to Data mining in SQL Server. I am using SQL 2005 to create a forecast model for Product sales. I two fact tables that I am using. One has all the Orders historically with the line item details. The other table is a time dimension table which has the value of each of the time values referenced in the Orders. So the time dimesion has multiple values for one day as it goes down to the hour the order was placed.
Can I create a forecast using the time series algorithm in the Data mining module. When I tried to use this algorithm, I got an error that the time is not synchronized with starting series "Unknown" and I should try to set the missing_value_Substitution parameter to previous.
Can some one explain to me how this will resolve my issue. I read in one of the articles on Data mining that in order to use the time series algorithm , I need to have unique set of values for the time. Can some one help me with this
Thanks
AY
Hi!
I want to get hole through to Analysis Services 2005
from MS SQL Server 2005 with openquery,
so I created linked server (MSOLAP).
How to test that I can access an "database" on Analysis Services Server?
Something like select * from openquery(linked_olap, getdate())
or openquery(linked_olap, 'print hello world')
or openquery(linked_olap, select results from dataminingmodelCreatedWithVstudio)
?
Thanks
Bjørn
I've just started with Reporting Services 2005 and I'm having a problem with a model I'm trying to create. I have 6 views that I have created. They are basically a select from the underlying table. The main view is the claims table and 5 other views that relate back to the claim view on claim id. When I create a relationship between the views in the dsv it loops back to the claim table. So, If I open the tables view on the left side I see a folder that says relationships. In that folder I see the relationship that I created. If I open that relationship I see the primary table and under that I have another relationships folder. It just keeps drilling down into the same tables over and over...
For example:
Table Recoveries relates to claims on claim_id
When I open the table recoveries I see the relationship and then the claims. When I open the table claims from within the recoveries table I see the table claims. it just keeps looping down?
So now I have published the model and users are seeing the same thing when they try to use the model. They can just keep drilling down through the model. This is causing issues with unexpected results.
Is this by design. Have I defined something incorrectly?
Is there an API or a way to consume a Report Model? I want to try and roll my own simple web-based / thin-client Report Builder without using the ClickOnce control.
Thanks,
--jason
Hi,
I have another question (again), does it possible to prepare a header for all my report as a model, with specidif color for my table ang chart (as it is define in a css file).
And after when I create a report I just told to put this model, and all I need was inserted... And more, if I do a change in my 'model' all the report which already import this 'model' have the modification... without opening each of them (and doing the modification it self)!
I hope my question is comprehensive...
I have a second question, how insert a header in a report via ReportBuilder ?
It is look like it is impossible, but why ?
Hi, I am trying to create an app that will work exactly like the inbox section in face book.
Do you have any database model I can use as a reference?
it works based on threads.
I am having issues with data redundancy any help will be appreciated.
Thanks
Hi,
I'm working on a project to create a mining model.I have one "flattened" table with a productID (key) and related attributes. Example columns are weight, color, price, units sold last year, product category, product rating (top seller, etc) and similar columns, about 40 in total. There are about 15,000 products and same number of rows in the table.
The objective is to pass a ProductID (that also exists in the table) and get back the top N products that most resemble the source product based on all the attributes.
Any advice on which models I should test and how to set up the models would be much appreciated. Also if there is a similar example/sample out there, please let me know. I downloaded the MovieClick sample, but that doesn't work in my case as I only have the equivalent of the Customers table.
Thanks in Advance.