Modify Dataflow Mapping In A Script Task
Jul 10, 2006
HI, I have to copy tables (approx. 60) content from one database to another using SSIS. I know that I can call an execute SQL task to execute an INSERT INTO <target table> SELECT * FROM <source table>.
I was wondering if I could use a single dataflow and change its source and target transform data source to do the same as above. In a script component, is it possible to load a package and modify its dataflow to simulate the INSERT INTO <target table> SELECT * FROM <source table>?
Thank you,
Ccote
View 3 Replies
ADVERTISEMENT
Oct 3, 2007
I was using the code in this thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1371094&SiteID=1) to create a console application which can build the SSIS package dynamically and run the package.
If the source column and destination column names are of different cases then the application was failing during the mapping. So I modified the for each loop like below. Still this is not a fool proof method, this will work as long as all characters in the column names are upper or lower.
for eg., Source column = empl_id, Destination column = EMPL_ID, in this case the below code will work. if the source column or destination column is Empl_Id, then the below mapping will fail.
Code Block
foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
IDTSInputColumn90 vCol = destnDesignTime.SetUsageType(input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READWRITE);
try
{
destnDesignTime.MapInputColumn(input.ID, vCol.ID, input.ExternalMetadataColumnCollection[vColumn.Name.ToLower()].ID);
}
catch
{
destnDesignTime.MapInputColumn(input.ID, vCol.ID, input.ExternalMetadataColumnCollection[vColumn.Name.ToUpper()].ID);
}
}
So how can I map the columns irrespective of the cases?
Thanks
View 9 Replies
View Related
Mar 7, 2007
1 :Control Flow Excute SQL task: Truncate Table
2: Dataflow Task: Datareader--Script componant--OLE DB Destination (SQL Server 2005--a single table --always around 600,000 rows)
How do I set up a transaction where if there is a failure the Truncate Table command will roll back---and the OLE Destination (A single SQL Server table) will be left the same as before the load started.
Another question with that volume of data --600,000 rows will a truncate table be pratical in a transaction
Any ides welcome
thanks in advance
David
View 3 Replies
View Related
Jun 12, 2007
An Execute SQL task takes 1 min to run a statement "insert into Mytable select * from view_using_joins"
Output: 10,225 rows affected.
But a Dataflow task configured to fetch data from the same view_using_joins into MyTable takes hours to do the same.
Could you please explain why is it so ?
Thanks
Subhash Subramanyam
View 14 Replies
View Related
Dec 24, 2007
Hi Pals,
Here is my scenario in my ETL process, I have one DataFlow task.
Assuming that i have 10 clean records in my source database and i need to load all the 10 recs into my target table.
IS there any means of cross checking the no of rows from source table and number of rows loaded into my target table.
Any suggestions are greatly appreciated.
Thanks & Regards.
View 6 Replies
View Related
Jan 18, 2007
Hi:
I am getting the following error when I start debugging my Package, I am not sure what this is related to, but basically, input (datatype is a int, and its mapped to a column which is also int), so I am not sure whats happening here. The input column is actually a derived column, and its set as a 4 byte un-signed int, please advice on where should I start looking to troubleshoot this issue. This loanapplicationid is actually a user variable that is utilized by other tasks in my control flow as well:
Error: 0xC020901C at InsertApplicationCL5, OLE DB Destination [16]: There was an error with input column "LoanApplicationID" (1161) on input "OLE DB Destination Input" (29). The column status returned was: "The value violated the integrity constraints for the column.".
View 5 Replies
View Related
Jun 21, 2007
Hello all,
I got a text file with two columns. and I need to generate a integer key automatically with the row number (or any distinct number, I thought row number will be OK). and when I make the data flow task to import this text file into a raw file I need to get the unique rownumber as Id.
How can I make this in the data flow tak??
regards,
View 5 Replies
View Related
Sep 28, 2007
I written a SSIS package to import a table from one database to another database. I used dataflow task with oledb source and oledb destination with fastload. For 2 million records its taking 5 min . The same import using DTS I am getting in 2 mins. DTS package is more faster than SSIS package ?. any reasons why SSIS is taking more time?
View 4 Replies
View Related
Nov 21, 2006
Need help regarding ssis dataflow task
I need to create a ssis package. I want to import the data from a flat file to a table.
Lets say, the table has 5 columns -- col1, col2, col3, col4 , col5.(Assume that all columns can be NULLABLE) The datafile contains the data related to only three columns say col1, col2, col3. So when I use dataflow task to import the data from the file to the table, I will only get three columns, col1, col2, col3. Columns col4, col5 will be NULL.
However, I want to populate columns col4, col5 with some values which are stored in the variable.
IS there any way to do this??
Any help would be appreciated.
Thanks
View 3 Replies
View Related
Feb 13, 2007
I want to be able to loop through a view and execute a dataflow task for each record. I would like to pass the value of a column to the dataflow task to be used as a parameter in a data reader.
How can I do this?
View 5 Replies
View Related
Jan 10, 2007
Hi,
I am getting data from an external source. External data has a column called "Type". I have a variable in my package which contains the list of types as shown below:
Filtered_type_List = 2,4,8,10,11
If this variable(Filtered_type_List) is blank, then I need all the data from the external source and if it is not blank then I only need the records matching to his list. How can I implement this in DataFlow Task?
Thanks
View 4 Replies
View Related
Jan 29, 2007
In the control flow I have an "Execute SQL Task" that executes a stored procedure. The stored procedure returns a result set of about 2000 rows of data into a package variable that has been typed as Object to contain the data.
What I have not been able to figure out is how to access the rows of data (in the package variable) from within a data flow task. There does not seem to be a data flow source task to perform that operation.
What am I missing that would make this easy?
...cordell...
View 8 Replies
View Related
Apr 17, 2008
I have 2 questions on this
(1) I know how to use the ? ? ? and 0, 1, 2 notation in Parameter Mapping within Execute SQL Task. However, the interface allows me to give descriptive names to my parameters (other than the ordinals 0, 1, 2, ...). To be more clear, if you go into Parameter Mapping and click in Parameter Name column, you are not just restricted to typing in 0, 1, 2, ... You can type anything you want for the name. Does this suggest that I can use other things besides a "?" in my SQL command?
(2) What is Parameter Size? Is this like a data type? If so, why am I allowed to type in anything I want in there?
View 3 Replies
View Related
Dec 13, 2007
Hi All,
I am using a stored procedure defined as follows:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE PROCEDURE [dbo].[GetPriority] @PriorityID TINYINT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
SELECT [Priority]
FROM [MTD Dashboard].[dbo].[Priority] WHERE [Priority ID]=@PriorityID
END
I want to use this stored procedure in a Execute SQL Task. What should be the SQL Statement, Parameter mappings and Result Set?
Can someone please help me in doing this.
Thanks
View 5 Replies
View Related
Mar 9, 2006
I am trying to assign the same package variable value to three different parameters in a query. The variable contains the name of a database which the user will input during package execution. First I check to see if the database exists (if it does I drop it), then in either case I create the database. See code:
if exists
(
select name
from sys.databases
where name = ?
)
begin
drop database ?;
end;
go
create database ?;
go
This is the error I am getting:
[Execute SQL Task] Error: Executing the query "if exists ( select name from sys.databases where name = ? ) begin drop database ?; end; " failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
My "User::DestinationDatabase" variable is mapped to 0,1,2 using an OLE DB connection. Any suggestions would be welcome.
Regards,
DO
View 13 Replies
View Related
Aug 11, 2005
I have debugged a Control Flow script task and everything went as expected. I put a breakpoint somewhere in my script code, press F5 and execution will break there.
View 15 Replies
View Related
Apr 13, 2008
Hi All,
I want to show the error message during Data Flow In SSIS, if an error would occur. I am able to redirect the row in file but i want to display the error like "Error : Its Not Set".
Is it possible? if please help me.
View 7 Replies
View Related
Jul 5, 2007
Hi,
In terms of data flow tasks, when say we load text files into databases.
Is it possible to have it in a way so that if a certain record (line in the text file) fails to load due to watever reason, it gets written to another table, but the rest of the records still get loaded?
I try to do so and end up with the whole data flow task failing and it stalls at the record that had the error and doesn't seem to continue forward.
I just used the red arrow (on failure) and put that to another SQL destination object. But yeah that didnt work.
If someone has a better way of doing so, would be awesome if you can share that.
Cheers
View 5 Replies
View Related
Aug 14, 2007
Hello, to give you a background on where I'm coming from:
I have an SSIS Package with a global String variable that has an sql statement. so it says something like: "Select * from MyTable "
I than have a SQL Script Task where I append a WHERE Statement to my string.
Than in the Dataflow Task when I select the source database, I run command from Variable.
When I run the package I get an error that my string is too long. My string is about 750 characters that I'm trying to pass through.
Is there some limitation to this?
I have ran the raw SQL Command in the SQL manager and it runs fine. I have built a million of these packages, just not one with such a large string.
If it is the case that it is just too long, is there a work around to that?
Thanks,
Rusty.
View 2 Replies
View Related
Apr 19, 2007
I have a problem whit loading XML-files into SQL server.
I iterate over the XML-files with the "for each file" component and use the XML source within a Data flow task. This works great until the file count got bigger. After say 1000 files the XML source returns error 0x8007000E. I think this means out of memory. Does anyone have an idea how to solv this. The load must be able to handle up to 5000 files in one batch.
View 3 Replies
View Related
Nov 21, 2006
Does anyone know how to create an eventhandler for a dataflow task specific events (OnPipelinePostEndOfRowset, OnPipelineRowsSent, etc.)? These events are available for logging via the standard logging infrastructure, but there seems to no eventhandler for them.
The reason I'm interested is that parsing information logged by these events using builtin log providers is not easy (eg., the number of rows sent gets burried somewhere in the message column (i'm using sql provider). I'd like to capture this information and record it cleanly in a custom ssis metadata database i'm building. Any ideas are welcome. Thanks.
-alex
View 8 Replies
View Related
Sep 27, 2007
Hi,
Is there a way to accomplish one- many or many -one or many - many column mappings in the SSIS data flow task or using any other tasks. We were able to do this in DTS Transform data task. Also is it possible to edit the mapping like:
dest column1 = Right(dest column1, 3)
Thanks.
View 4 Replies
View Related
Apr 17, 2006
Hi,
I am getting an error message (mentioned below) in the variable mapping of Execute SQL Task in SSIS.
" Error: ForEach Variable Mapping number 9 to variable "User::Value" cannot be applied. "
" Error: The type of the value being assigned to variable "User::Value" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. "
Pls anyone have a look and give me a solution asap.
Thanks & Regards,
Prakash Srinivasan.
View 4 Replies
View Related
Dec 27, 2007
Maybe I am mistaken ( most likely ). But I am missing a dataflow task, which would do something similar like Throw Execption.
The project I am currently working on needs to validate a lot of different data. And sometimes incorrect data ( corrupted, incomplete or unexepected ) is coming from the source system. In case of this I need to trigger an error and discard the complete row or batch depending on the situation.
For example:
In our source system we have some flag fields. And certain combinations of flags are not logical (business rules) but the system allows data to be inputted in this unlogical ways. And because we are creating the system I am expecting some combinations flags which are allowed but not properly defined in the specification.
So when I use a conditional split, I want the default output to trigger an error instead of an output.
View 10 Replies
View Related
Feb 13, 2007
How can I pass a variable to a DataReader in a DataFlow task?
My SqlCommand for the DataReader is:
SELECT CustName, CustCode FROM Customers WHERE CustCode = '?'
The DataFlow task is nested in a ForEach loop. I confirmed that the variable is changing with each loop by using a ScriptTaks and a message box. However, the DataReader SqlCommand does not seem to be updating.
View 4 Replies
View Related
Oct 10, 2006
I am trying to use an XML Source on xml data from an XML webservice, I am putting the document into a variable the trying to import the data from there with the XML Source, but I am getting an error telling me that truncation occured
The Error is "[XML Source [1]] Error: The "component "XML Source" (1)" failed because truncation occurred, and the truncation row disposition on "output column "linking" (1579)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component."
The linking column mensioned in the error is sometime quite a long string but there is nowhere in the XML Source editor to change the size.
HELP!
View 3 Replies
View Related
Aug 22, 2007
Hi,
I have a package in which i have programatically created dataflow task. It used to work fine but now it fails with series of errors out of which one is below
Error 30002: Type 'MainPipe' is not defined. Line 63 Columns 33-40 Line Text: Dim DataFlowTask As MainPipe = CType(DataFlowTaskHost.InnerObject, MainPipe)
It seems all the function and classes referd from following dlls is not working:
Microsoft.SqlServer.DTSRuntimeWrap.dll
Microsoft.SqlServer.DTSPipelineWrap.dll
I say so because i get the following error also:
Error 30652: Reference required to assembly 'Microsoft.SqlServer.DTSRuntimeWrap, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' containing the type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90'. Add one to your project. Line 86 Columns 33-64 Line Text: DtsConvert.ToConnectionManager90(ChildPackage.Connections(""Source"")) These dlls are in GAC and in C:Program FilesMicrosoft SQL Server90SDKAssemblies with same version but still it gives above error.
Thanks
Mohit
View 11 Replies
View Related
Jul 12, 2006
Hi, I am trying to use an integer as input parameter for my task I get suck on the parameter data type.
The input parameter is define as @Control_ID variable as Int32 in SSIS. When I got into the parameter mapping of Execute SQL Task, I don't find the Int32 data type. I used to try Short, Numeric, Decimal and so on, but all of those data type didn't work. and it returns the following error message:
SSIS package "DCLoading.dtsx" starting.
Error: 0xC002F210 at Update Control_ID, Execute SQL Task: Executing the query "use DCAStaging
update DCA_HFStaging set
[dbo].[Control_ID] = P0 where [Control_ID] is null
" failed with the following error: "The multi-part identifier "dbo.Control_ID" could not be bound.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Update Control_ID
Warning: 0x80019002 at DCLoading: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "DCLoading.dtsx" finished: Failure.
Any help?
View 6 Replies
View Related
Dec 17, 2007
Hi ALL,
I have a Execute SQL Task to execute a stored procedure. It has no input and output parameters.
The stored procedure is defined as follows:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE PROCEDURE [dbo].[SetSLATimePriority]
AS
BEGIN
DECLARE @PriorityID tinyint,@MAXPriorityID tinyint
DECLARE @Priority NVARCHAR(MAX), @SLATime int
SET @PriorityID=1
SET @MAXPriorityID=0
SELECT @MAXPriorityID=MAX([Priority ID]) FROM [MTD Dashboard].[dbo].[Priority]
SET NOCOUNT ON;
WHILE @PriorityID<=@MAXPriorityID
BEGIN
SELECT @Priority= [Priority] FROM [MTD Dashboard].[dbo].[Priority]
WHERE [Priority ID]=@PriorityID
SELECT @SLATime= [SLA Time in hours] FROM [MTD Dashboard].[dbo].[Priority]
WHERE [Priority ID]=@PriorityID
UPDATE [MTD Dashboard].[dbo].[Remedy Dump-Filtered]
SET [SLA Time] = @SLATime WHERE [Priority] like @Priority
SET @PriorityID=@PriorityID+1
END
END
The Properties of Execute SQL Task are set as follows:
Result Set: None
Connection Type: OLEDB
SQL Source Type: Direct Input
SQL Statement: EXEC ? = [dbo].[SetSLATimePriority]
IsQueryStoredProcedure: True
ByPassPrepare: False
Parameter Mapping:
Variable Name : User::IntValue
Direction: ReturnValue
Data Type: Long
ParameterName: 0
I am getting the following error, when I run this package.
[Execute SQL Task] Error: Executing the query "EXEC ? = [dbo].[SetSLATimePriority]" failed with the following error: "Invalid parameter number". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I am not able to figure out, where exactly the problem is.. Can some one please help me out?
View 3 Replies
View Related
Apr 7, 2008
Hi All,
I am using a Data Flow task which copies data from an Excel Source to a SQL Database Table Destination. From 15 columns I require only 10 columns to be imported to the DB Table. So I have mapped those colums. In SQL DB there is a colum called say X, whose value should be the "Remedy" for all the columns which are imported. Is there any task that can achieve it.
Please Help.
View 10 Replies
View Related
Jul 4, 2006
I need to write back to a legacy system in the form of flat file --the first row would be a header and the remaining rows would be the actuals rows of data--each field would have a column delimiter of , and a row delimter of CRLF.
The source is a SQL Server 2005 table.
Im looking for a good example of a script task in the dataflow section that writes to a file.
Can anyone show me the code how to do this or point me to a link.
thanks in advance
Dave
View 10 Replies
View Related
Mar 29, 2007
Hello All,
I am trying to convert an application created using DTS classes to SSIS object model. I have found following code in the application.
For x As Integer = 1 To mTask.Properties.Count
If mTask.Properties.Item(x).Name = "SourceConnectionID" Then
CnID = mTask.Properties.Item(x).Value
Exit For
End If
Next
For x As Integer = 1 To mPkg.DTSPackage.Connections.Count
If mPkg.DTSPackage.Connections.Item(x).ID = CnID Then
Return mPkg.DTSPackage.Connections.Item(x).Name
End If
Next
Return mTask.Properties.Item("SourceObjectName").Value
How can I retrieve or Set "SourceConnectinId", "SourceObjectName" of a data flow task in SSIS
Please help me to solve this problem.
Thanks in advance
Subin
View 5 Replies
View Related
Apr 25, 2006
I Can't reproduce the error if I run the package stand-alone.
I'm using the same lookup call (same table, etc.) in 2 packages that are running in parallel (called by a parent package).
[LKP_UnderwriterId [72283]] Error: An OLE DB error has occurred. Error code: 0x80040E05. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E05 Description: "Object was open.".
Anyone seen this one?
View 3 Replies
View Related
