More Setup Woes; Installing SQL Develoepr Edition After SQL Express SP2
Apr 3, 2007
So after getting no resolution to my previous problems installing SQL Express SP2 after having applied SP2 to the Developer SKU and needing Express for demo purposes (at a conference amusingly held at an MS regional office) I decided to start again.
After some struggles I uninstalled SQL Server (it crashed during uninstall, and I had to manually remove all the registry entries and clean up the directories).
Sql Express SP2 installed fine, but now developer edition refuses to install; more specifically the Management Tools and documentation portion. Absolutely stunning.
I found one problem in that the install would not proceed (installing the engine) because a more recent version of SQLXML was installed, which I got past by uninstalling the SQLXML installation Express had put onto the machine.
However now I am stuck without any management tools whatsoever (although books on-line installed).
Is it so hard to install two Microsoft products side by side? I am tearing my hair out here and utterly sick of this, especially as last time I tried to log a support call with the Express issue MS support refused to take it (despite having incident calls to burn)
Machine : PUCK
Product : Workstation Components, Books Online and Development Tools
Error : There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
--------------------------------------------------------------------------------
<EndFunc Name='Set_CommitFlag' Return='0' GetLastError='0'>
PerfTime Stop: Set_CommitFlag : Tue Apr 03 13:22:47 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (60:E8) [13:22:47:609]: Note: 1: 1722 2: SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A 3: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe 4: /setup
MSI (s) (60:E8) [13:22:47:640]: Transforming table Error.
MSI (s) (60:E8) [13:22:47:656]: Transforming table Error.
MSI (s) (60:E8) [13:22:47:656]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (60:E8) [13:22:47:656]: Transforming table Error.
MSI (s) (60:E8) [13:22:47:656]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (60:E8) [13:22:47:656]: Transforming table Error.
MSI (s) (60:E8) [13:22:47:656]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (60:E8) [13:22:52:203]: Transforming table Error.
MSI (s) (60:E8) [13:22:52:203]: Transforming table Error.
MSI (s) (60:E8) [13:22:52:203]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (60:E8) [13:22:52:203]: Transforming table Error.
MSI (s) (60:E8) [13:22:52:203]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (60:E8) [13:22:52:203]: Transforming table Error.
MSI (s) (60:E8) [13:22:52:203]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (60:E8) [13:22:52:203]: Product: Microsoft SQL Server 2005 Tools -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A, location: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, command: /setup
Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A, location: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, command: /setup
The problem seems to be in setting up the workbench. Could this be because I already have Visual Studio SP1 installed?
View 1 Replies
ADVERTISEMENT
Dec 4, 2006
I just upgraded ACT database and it needs SQL Server. I just keep getting "SQL Server Setup Failed". I downloaded SQL from Microsoft, went to install and get the same error. It then refers to a summary txt log which I have had a look at but to be quite honest means nothing to me.
I only want to be able to use ACT!!
Anyone help PLEASE!!
View 20 Replies
View Related
May 6, 2007
Hi guys,
I'm trying to create a all-in-one installation package for my application which make use of the SQL 2005 Express edition. It seems that there's no way to roll my application MSI installation with the database engine, the only ways around this problem is to use a bootstrap exe to launch the sql setup before or after my main application's MSI. This works fine during installation and I have modified the original .NET framework bootstrapper to do just that.
The problem comes when uninstalling my application. Since the uninstall process is all done through the MSI engine, how would I take the sql instance with me during my application's uninstall? Since the sql engine is also based on MSI technology, I won't be able to do that during the removal step of my application's MSI, right? Any one know any "clean" ways around that? Besides not letting users uninstall my application directly from Add/Remove program and force them to call another exe simular to my installation bootstrap?
I'm considering to use 3rd party tools like InstallShields, but even them are recommending people to stay with the MSI technology which is where the problem is. I'm running out of ideas really fast...
Thanks in advance!
William
View 1 Replies
View Related
Jun 15, 2006
When I try to Install SQL Server expres edition I keep on getting this error: http://www.fambouman.com/SQLError.JPG
I'am running Windows SBS 2003 fully updated via windows update.. When I go to the URL mentioned in the error I get an error and the browser redirects to microsoft search.
Anybody know how I can setup SQL Expres ? I need it for dotnetnuke to run.
Thanks in advance
View 4 Replies
View Related
Dec 1, 2007
I have Windows Vista Home Premium, with Visual Studio 2005 installed, and SQL Server Express Edition installed. What I want to do is upgrade to SQL Server Express Edition SP2. I understand that I can install SP2 on top of SQL Server Express Edition. However, there are just a couple of areas that I'd like assurances on (have never used SQL Server):
1. Since all my work with SQL Server Express Edition SP2 will be done via the Visual Studio 2005 IDE, does that mean that I don't need to download and install SQL Server Management Studio Express? The Management Studio seems to be more for a standalone development environment. I just want to make sure about this.
2. Also, the information on the information page about Windows Vista issues with User Account Control is not specific to SQL Express Edition SP2. There's a lot of generic and, quite frankly, very abstract information that is hard to understand. For now I'm just planning to install SQL Server and leave it at that, unconfigured, in whatever state the install leaves it at. I am hoping against hope that I will be able to familiarize myself with SQL Server via the Microsoft Visual C# 2005 Step-by-Step book, which is why I'm upgrading to SQL Server Express Edition SP2 in the first place. I'll glean what I can about configuration in the SQL Server Express Edition SP2 docs, but what are the chances that I'll find anything that is specific to using the database soley with Visual Studio 2005? Perhaps I'll be pleasantly surprised. About the User Account control issues, are there are any articles that specifically discuss User Account control issues that are associated with SQL Server Express Edition SP2?
Sorry about the windage. I'm a little cranky after spending about 2 hours clicking from one link to another.
Ed
View 1 Replies
View Related
Apr 12, 2006
I tried to execute SQL Server Express Setup through InstallShield Script and it says that i required Admin Privilege. I checked and i have an Adnming privilegers.
Here is the Script. And the check says that i am an admin.
if ( Is(USER_ADMINISTRATOR, "") = TRUE) then
MessageBoxEx("Admin...","Install",SEVERE);
else
MessageBoxEx("Non Admin...","Install",SEVERE);
endif;
setuppath = "C:\Program Files\dir\Setup.exe";
sqlcmd = "ADDLOCAL=ALL";
LaunchAppAndWait(setuppath,sqlcmd,LAAW_OPTION_WAIT);
if(LAAW_PARAMETERS.nLaunchResult != 0) then
MessageBoxEx("Fail to install SQL Server Express...","Install",SEVERE);
endif;
What could be the possible reson for failr?
-timir
View 1 Replies
View Related
Sep 15, 2007
I have Windows Vista and Visual Studio 2005 Standart Edition.I have wanted to install SQL Server 2005 Express Edition to my PC to use Database applications with my Visual Studio.But there was a problem on the setup,like the below.Please help me.
"SQL Server setup failde to execute a command for server configuration.The error was[Microsoft] [SQL Native Client][SQL Server] Windows NT user or group 'HÜSEYİN-
PC SQL Server2005MSSQLUser$SQLEXPRESS' not found.Ckeck the name again..Refer to the server error logs and seup logs for detailed error information."
View 2 Replies
View Related
May 8, 2015
No logs created, this is all I have:
Unhandled Exception: System.Security.SecruityException: Request failed.
at Microsoft.SqlServer.Chainer.Setup.Setup.DebugBreak()
at Microsoft.SqlServer.Chainer.Setup.Setup.Main()
Then the Managed SQL Server Installer box pops up with Managed SQL Server Installer has stopped working.
View 11 Replies
View Related
Dec 3, 2006
I have Visual Web Developer 2005 Express edition and I wanted to install SQL Server 2005 Express edition.From this page, I have downloaded and installed 'Microsoft SQL
Server 2005 Express Edition' and 'Microsoft SQL
Server 2005 Express Edition with Advanced Services http://msdn.microsoft.com/vstudio/express/sql/download/After the installation, how should I access the SQL Server 2005 Express edition?Because the only thing listed in 'Start > All Programs > SQL Server 2005' is 'Configuration Tools'I was hoping that when I install SQL Server 2005 express edition, I would get all the menu that I get by installing SQL Server 2000.So after installing SQL Server 2005 Express edition, what should I be expection? Thanks
View 4 Replies
View Related
Dec 3, 2007
I have downloaded a free set of SQL Server 2005 Express edition. This set up has been installed successfully on my machine but it is showing me following links.
SQL Server Instance=SQLExpress
User Id=sa
Password=admin12
Start ---> Microsoft Sql Server 2005 --->Configuration Tools ------->SQL Server Configuration Manager
--------->SQL Server Eroor and Usage Reporting
----------->SQL Server Surface Area Configuration
But I don't find any option to start SQL Server 2005 express edition. Please help me out how to start SQL Server 2005 express edition?
View 5 Replies
View Related
Apr 4, 2007
I am trying to install sql server 2005 express edition.But i get an error stating that
sql server setup unexpectedly failed. For more information review the detup summary log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGsummary.txt
Summary.txt looks like this.It has only these 3 lines of information nothing else other this, which i have seen in many posts.
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Time : Tue Apr 03 22:36:33 2007
I am using windows xp. Probably many of you might have had this problem.Could anyone please provide me with some help.Thanks in advance.
View 3 Replies
View Related
Sep 13, 2006
hi,
I have SQL Server Express edition installed on my PC , but now I need to use SQL Server reporting service, there is SP1 for express edition contains reporting service with express edition. Here..
http://msdn.microsoft.com/vstudio/express/sql/download/
Do I need to download 213 MB SQL Server 2005 Express Edition Toolkit SP1 ?
or there is any other method to use reporting services ?
Thanks
View 1 Replies
View Related
Dec 20, 2005
I encountered an error when attempting to install Visual Basic Express Edition RTM. During the setup, I selected MSDN Express Edition and SQL Server 2005 Express Edition. Specifically, the SQL Server 2005 EE part of the installation failed. Here's the error I received:
Visual Basic 2005 Express Edition Setup
Error occurred during setup
Visual Basic 2005 Express Edition has been successfully installed.
The following component failed to install:
Microsoft SQL Server 2005 Express Edition x86
I had not installed any betas on this particular PC; however, I had already installed Visual Studio 2005 Pro and SQL Server 2005 Developer Edition.
(I selected SQL Server EE during the VBEE install because the VBEE readme said that the VSEE Editions (except for VWD) only work with SQL Server EE--so I figured I had to install SQL Server EE if I wanted to do any database work with VBEE. Is that the case?)
The following two log files were the only ones containing any error messages. How should I proceed?
C:Program Filesmicrosoft sql server90setup bootstraplogfilesSQLSetup0003_US05046_Core.log:
Microsoft SQL Server 2005 Setup beginning at Mon Dec 19 14:40:32 2005
Process ID : 5824
c:211395ac6e4ed715363fsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2005/11/19 14:40:31
Complete: LoadResourcesAction at: 2005/11/19 14:40:31, returned true
Running: ParseBootstrapOptionsAction at: 2005/11/19 14:40:31
Loaded DLL:c:211395ac6e4ed715363fxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2005/11/19 14:40:32, returned true
Running: ValidateWinNTAction at: 2005/11/19 14:40:32
Complete: ValidateWinNTAction at: 2005/11/19 14:40:32, returned true
Running: ValidateMinOSAction at: 2005/11/19 14:40:32
Complete: ValidateMinOSAction at: 2005/11/19 14:40:32, returned true
Running: PerformSCCAction at: 2005/11/19 14:40:32
Complete: PerformSCCAction at: 2005/11/19 14:40:32, returned true
Running: ActivateLoggingAction at: 2005/11/19 14:40:32
Complete: ActivateLoggingAction at: 2005/11/19 14:40:32, returned true
Running: DetectPatchedBootstrapAction at: 2005/11/19 14:40:32
Complete: DetectPatchedBootstrapAction at: 2005/11/19 14:40:32, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__5824" returned false.
Running: PerformSCCAction2 at: 2005/11/19 14:40:32
Loaded DLL:C:WINNTsystem32msi.dll Version:3.1.4000.2435
Loaded DLL:C:WINNTsystem32msi.dll Version:3.1.4000.2435
Complete: PerformSCCAction2 at: 2005/11/19 14:40:33, returned true
Running: PerformDotNetCheck at: 2005/11/19 14:40:33
Complete: PerformDotNetCheck at: 2005/11/19 14:40:33, returned true
Running: ComponentUpdateAction at: 2005/11/19 14:40:33
Complete: ComponentUpdateAction at: 2005/11/19 14:41:6, returned true
Running: DetectLocalBootstrapAction at: 2005/11/19 14:41:6
Complete: DetectLocalBootstrapAction at: 2005/11/19 14:41:6, returned true
Running: LaunchLocalBootstrapAction at: 2005/11/19 14:41:6
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 1706
Aborting queue processing as nested installer has completed
Message pump returning: 1706
C:Program Filesmicrosoft sql server90setup bootstraplogfilesSQLSetup0003_US05046_Core(Local).log:
Microsoft SQL Server 2005 Setup beginning at Mon Dec 19 14:41:10 2005
Process ID : 5476
c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2005/11/19 14:41:9
Complete: LoadResourcesAction at: 2005/11/19 14:41:9, returned true
Running: ParseBootstrapOptionsAction at: 2005/11/19 14:41:9
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2005/11/19 14:41:9, returned true
Running: ValidateWinNTAction at: 2005/11/19 14:41:9
Complete: ValidateWinNTAction at: 2005/11/19 14:41:9, returned true
Running: ValidateMinOSAction at: 2005/11/19 14:41:9
Complete: ValidateMinOSAction at: 2005/11/19 14:41:9, returned true
Running: PerformSCCAction at: 2005/11/19 14:41:9
Complete: PerformSCCAction at: 2005/11/19 14:41:9, returned true
Running: ActivateLoggingAction at: 2005/11/19 14:41:9
Complete: ActivateLoggingAction at: 2005/11/19 14:41:10, returned true
Running: DetectPatchedBootstrapAction at: 2005/11/19 14:41:10
Complete: DetectPatchedBootstrapAction at: 2005/11/19 14:41:10, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__5476" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2005/11/19 14:41:10
Complete: PerformDotNetCheck2 at: 2005/11/19 14:41:12, returned true
Running: InvokeSqlSetupDllAction at: 2005/11/19 14:41:12
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [US05046]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = US05046, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = US05046, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = US05046, Article = XMLDomDocument, Result = 0 (0x0)
Machine = US05046, Article = Processor, Result = 0 (0x0)
Machine = US05046, Article = PhysicalMemory, Result = 0 (0x0)
Machine = US05046, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = US05046, Article = OSVersion, Result = 0 (0x0)
Machine = US05046, Article = OSServicePack, Result = 0 (0x0)
Machine = US05046, Article = OSType, Result = 0 (0x0)
Machine = US05046, Article = AdminShare, Result = 0 (0x0)
Machine = US05046, Article = PendingReboot, Result = 0 (0x0)
Machine = US05046, Article = IEVersion, Result = 0 (0x0)
Machine = US05046, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = US05046, Article = COMPlus, Result = 0 (0x0)
Machine = US05046, Article = ASPNETVersionRegistration, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: US05046
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
Loaded DLL:c:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2005/11/19 14:42:59, returned true
Running: SetPackageInstallStateAction at: 2005/11/19 14:42:59
Complete: SetPackageInstallStateAction at: 2005/11/19 14:43:1, returned true
Running: DeterminePackageTransformsAction at: 2005/11/19 14:43:1
Complete: DeterminePackageTransformsAction at: 2005/11/19 14:43:5, returned true
Running: ValidateSetupPropertiesAction at: 2005/11/19 14:43:5
Complete: ValidateSetupPropertiesAction at: 2005/11/19 14:43:5, returned true
Running: OpenPipeAction at: 2005/11/19 14:43:5
Complete: OpenPipeAction at: 2005/11/19 14:43:5, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2005/11/19 14:43:5
Complete: CreatePipeAction at: 2005/11/19 14:43:5, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2005/11/19 14:43:5
Complete: PopulateMutatorDbAction at: 2005/11/19 14:43:5, returned true
Running: GenerateRequestsAction at: 2005/11/19 14:43:5
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = 3
SQL_FullText = -1
SQL_SharedTools = 3
SQL_BC_DEP = -1
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = 3
Connectivity = 3
SQL_Tools90 = -1
SQL_WarehouseDevWorkbench = -1
SDK = 3
SQLXML = -1
Tools_Legacy = -1
TOOLS_BC_DEP = -1
SQL_Documentation = -1
SQL_BooksOnline = -1
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2005/11/19 14:43:11, returned true
Running: CreateProgressWindowAction at: 2005/11/19 14:43:11
Complete: CreateProgressWindowAction at: 2005/11/19 14:43:12, returned false
Error: Action "CreateProgressWindowAction" failed during execution.
Running: ScheduleActionAction at: 2005/11/19 14:43:12
Complete: ScheduleActionAction at: 2005/11/19 14:43:13, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
No install request found for package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
No install request found for package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2005/11/19 14:43:14
Installing: sqlsupport on target: US05046
Complete: InstallSqlAction.11 at: 2005/11/19 14:43:26, returned true
Running: InstallSqlAction.12 at: 2005/11/19 14:43:26
Installing: sqlncli on target: US05046
Complete: InstallSqlAction.12 at: 2005/11/19 14:43:40, returned true
Skipped: InstallSqlAction.18
Skipped: Action "InstallSqlAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "sql", install will be skipped as a result.
Running: InstallSqlAction.21 at: 2005/11/19 14:43:40
Installing: sqlwriter on target: US05046
Failed to install package
Fatal error during installation.
Setting package return code to: 1706
Complete: InstallSqlAction.21 at: 2005/11/19 14:43:50, returned false
Error: Action "InstallSqlAction.21" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Skipped: InstallSqlAction.22
Skipped: Action "InstallSqlAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "sql", install will be skipped as a result.
Running: InstallSqlAction.9 at: 2005/11/19 14:43:50
Installing: msxml6 on target: US05046
Complete: InstallSqlAction.9 at: 2005/11/19 14:43:54, returned true
Running: InstallToolsAction.11 at: 2005/11/19 14:43:54
Installing: sqlsupport on target: US05046
Complete: InstallToolsAction.11 at: 2005/11/19 14:44:2, returned true
Running: InstallToolsAction.12 at: 2005/11/19 14:44:2
Installing: sqlncli on target: US05046
Complete: InstallToolsAction.12 at: 2005/11/19 14:44:11, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.18
Skipped: Action "InstallToolsAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.20
Skipped: Action "InstallToolsAction.20" was not run. Information reported during analysis:
No install request found for package: "BOL", referred by package: "tools", install will be skipped as a result.
Skipped: InstallToolsAction.22
Skipped: Action "InstallToolsAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.9 at: 2005/11/19 14:44:11
Installing: msxml6 on target: US05046
Complete: InstallToolsAction.9 at: 2005/11/19 14:44:15, returned true
Action "InstallSqlAction" will return false due to the following preconditions:
Condition "Action: InstallSqlAction.21 has finished and failed." returned true.
Installation of package: "sql" failed due to a precondition.
Step "InstallSqlAction" was not able to run.
Skipped: InstallNSAction.10
Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result.
Running: InstallToolsAction at: 2005/11/19 14:44:15
Installing: tools on target: US05046
Complete: InstallToolsAction at: 2005/11/19 14:44:26, returned true
Skipped: InstallToolsAction.10
Skipped: Action "InstallToolsAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "tools", install will be skipped as a result.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run:
Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchMSDE2000" failed due to a precondition.
Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run:
Action: "UninstallForSQLAction" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchLibertySql" failed due to a precondition.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2005/11/19 14:44:27
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1706
Error Code: 0x800706aa (1706)
Windows Error Text: The endpoint format is invalid.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
sqls::HighlyAvailablePackage::manageVsResources
ce: 29539
Error: Failed to add file :"C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_US05046_.NET Framework 2.0.log" to cab file : "C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0003.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2005/11/19 14:44:52
Message pump returning: 1706
View 2 Replies
View Related
Nov 15, 2005
I've installed VS2005 Standard Edition onto a machine running XP Home
View 11 Replies
View Related
Feb 13, 2007
I am facing a problem while installing SQL Server 2005 Express Edition on my machine. Included below is the text of the logfile Summary.txt
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Tue Feb 13 20:49:01 2007
ABC-621F39F0E0D : The current system does not meet recommended hardware requirements for this SQL Server release. For detailed hardware requirements, see the readme file or SQL Server Books Online.
Machine : ABC-621F39F0E0D
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0015_ABC-621F39F0E0D_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : ABC-621F39F0E0D
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0015_ABC-621F39F0E0D_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : ABC-621F39F0E0D
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0015_ABC-621F39F0E0D_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : ABC-621F39F0E0D
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0015_ABC-621F39F0E0D_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : ABC-621F39F0E0D
Product : SQL Server Database Services
Error : SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted.
Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
--------------------------------------------------------------------------------
Machine : ABC-621F39F0E0D
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.1.2047.00
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0015_ABC-621F39F0E0D_SQL.log
Last Action : InstallFinalize
Error String : SQL Server Setup could not connect to the database service for server configuration. The error was: {Microsoft}{SQL Native Client}SSL Provider: The certificate chain was issued by an authority that is not trusted.
Error Number : 29515
--------------------------------------------------------------------------------
View 1 Replies
View Related
Oct 11, 2006
error saying disk compressed or encryted, choose another drive?
how should i t-shoot !!!!!
View 1 Replies
View Related
Jul 20, 2006
Hello,I have installed SQL Server 2005 Express Edition Advanced Services andSQL Server 2005 Express Edition Toolkit SP1. I cannot use full-textsearch. When I called:exec sp_fulltext_service 'load_os_resources', 1;exec sp_fulltext_service 'verify_signature', 0;goI got error:Full-Text Search is not installed, or a full-text component cannot beloaded.What should I do to be able to use full text search? Could you help meplease? I cannot find solution in Internet.../RAM/
View 1 Replies
View Related
Apr 20, 2006
ENVIRONMENT
Windows 2000 Professional (Build 2195: Service Pack 4)
Previous version of SQL Server 2005 Express Edition with Advanced Services CTP was removed using Add/Remove Programs
Visual Studio 2005 Professional is installed
WARNING MESSAGE (should it be an error message since what was requested did not take place?)
---------------------------
Microsoft SQL Server 2005 Setup
---------------------------
Warning 28123.Warning: SQL Server Setup cannot install this feature because a different edition of this feature is already installed. For more information, see 'Version and Edition Upgrades' in SQL Server Books Online.
---------------------------
OK
---------------------------
FAILED WORKAROUND STEPS
1. Used Add/Remove Programs to remove Microsoft SQL Server 2005 (there was only a single instance).
2. Since Microsoft SQL Server 2005 still appeared in the list of programs to remove, decided to reboot.
3. After reboot, Microsoft SQL Server 2005 still appeared in Add/Remove Programs. Clicked the Remove button a second time and clicked the Yes button to remove it from the list.
4. Used Add/Remove Programs to remove Microsoft SQL Server Management Studio Express.
5. Used Add/Remove Programs to remove Microsoft SQL Server Native Client.
6. Rebooted.
7. deleted services
C:WINNT>sc delete MSSQLServerADHelper
[SC] DeleteService SUCCESS
C:WINNT>sc delete SQLBrowser
[SC] DeleteService SUCCESS
C:WINNT>sc delete MsDtsServer
[SC] OpenService FAILED 1060:
The specified service does not exist as an installed service
C:WINNT>sc delete MSSQL
[SC] OpenService FAILED 1060:
The specified service does not exist as an installed service
C:WINNT>sc delete SqlAgent
[SC] OpenService FAILED 1060:
The specified service does not exist as an installed service
C:WINNT>sc delete MSOLAP
[SC] OpenService FAILED 1060:
The specified service does not exist as an installed service
C:WINNT>sc delete ReportServer
[SC] OpenService FAILED 1060:
The specified service does not exist as an installed service
C:WINNT>sc delete Msftesql
[SC] DeleteService SUCCESS
8. Deleted assemblies.
C:WINNT>if exist "%windir%assemblyGAC*SQLServer*" del /s /q /f "%windir%assemblyGAC*SQLServer*"
C:WINNT>
C:WINNT>if exist "%windir%assemblyGAC_32*SQLServer*" del /s /q /f "%windir%assemblyGAC_32*SQLServer*"
Deleted file - C:WINNTassemblyGAC_32Microsoft.SqlServer.BatchParser9.0.242.
0__89845dcd8080cc91microsoft.sqlserver.batchparser.dll
Deleted file - C:WINNTassemblyGAC_32Microsoft.SqlServer.MgdSqlDumper9.0.242
.0__89845dcd8080cc91microsoft.sqlserver.mgdsqldumper.dll
Deleted file - C:WINNTassemblyGAC_32Microsoft.SqlServer.Replication9.0.242.
0__89845dcd8080cc91Microsoft.SqlServer.Replication.dll
C:WINNT>
C:WINNT>if exist "%windir%assemblyGAC_MSIL*SQLServer*" del /s /q /f "%windir%assemblyGAC_MSIL*SQLServer*"
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.ConnectionInfo9.0
.242.0__89845dcd8080cc91Microsoft.SqlServer.ConnectionInfo.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.CustomControls9.0
.242.0__89845dcd8080cc91Microsoft.SqlServer.CustomControls.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.GridControl9.0.24
2.0__89845dcd8080cc91Microsoft.SqlServer.GridControl.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.Instapi9.0.242.0_
_89845dcd8080cc91Microsoft.SqlServer.InstApi.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.msxml6_interop6.0
.0.0__89845dcd8080cc91Microsoft.SqlServer.msxml6_interop.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.RegSvrEnum9.0.242
.0__89845dcd8080cc91Microsoft.SqlServer.RegSvrEnum.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.Replication.Busine
ssLogicSupport9.0.242.0__89845dcd8080cc91Microsoft.SqlServer.Replication.Busin
essLogicSupport.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.Rmo9.0.242.0__898
45dcd8080cc91Microsoft.SqlServer.Rmo.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.ServiceBrokerEnum
9.0.242.0__89845dcd8080cc91Microsoft.SqlServer.ServiceBrokerEnum.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.Smo9.0.242.0__898
45dcd8080cc91Microsoft.SqlServer.Smo.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.SmoEnum9.0.242.0_
_89845dcd8080cc91Microsoft.SqlServer.SmoEnum.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.SqlEnum9.0.242.0_
_89845dcd8080cc91Microsoft.SqlServer.SqlEnum.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.SqlTDiagM9.0.242.
0__89845dcd8080cc91Microsoft.SqlServer.SqlTDiagM.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.SString9.0.242.0_
_89845dcd8080cc91Microsoft.SqlServer.SString.dll
Deleted file - C:WINNTassemblyGAC_MSILMicrosoft.SqlServer.WmiEnum9.0.242.0_
_89845dcd8080cc91Microsoft.SqlServer.WmiEnum.dll
9. Deleted the entire C:Program FilesMicrosoft SQL Server folder.
10. Deleted the entire HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server registry key.
11. Deleted the entire HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServer registry key.
12. Rebooted
13. Deleted these registry keys:
HKEY_CLASSES_ROOTApplicationssqlwb.exe
HKEY_CLASSES_ROOTApplicationsssmsee.exe
14. Used a program to delete every registry key with a string value of C:Program FilesMicrosoft SQL Server in itself or any of its subkeys.
15. Deleted every registry key beginning with DTS
16. Removed all references to SQL Server from the PATH variable and rebooted.
17. Ran SQLEXPR_ADV.EXE (version that was signed on April 15, 2006 1:24:21 AM).
18. Unchecked Hide advanced configuration options.
19. Selected all features.
20. Selected Default instance.
21. Changed to Mixed Mode.
22. Selected Latin1_General under Collation designator and sort order.
23. Unchecked Enable User Instances.
24. Setup fails on product Workstation Components, Books Online and Development Tools with the dialog box shown near the top of this post.
Summary Log
--------------------------------------------------------------------------------
Machine : SomeComputerName
Product : Workstation Components, Books Online and Development Tools
Warning : Warning 28123.Warning: SQL Server Setup cannot install this feature because a different edition of this feature is already installed. For more information, see 'Version and Edition Upgrades' in SQL Server Books Online.
--------------------------------------------------------------------------------
Detailed Tools Log
=== Verbose logging started: 4/20/2006 10:55:39 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (04:B8) [10:55:39:234]: Resetting cached policy values
MSI (c) (04:B8) [10:55:39:234]: Machine policy value 'Debug' is 0
MSI (c) (04:B8) [10:55:39:234]: ******* RunEngine:
******* Product: e:6771b864b449c707fd961a7fd719a8c1SetupSqlRun_Tools.msi
******* Action:
******* CommandLine: **********
MSI (c) (04:B8) [10:55:39:250]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (04:B8) [10:55:39:250]: Grabbed execution mutex.
MSI (c) (04:B8) [10:55:39:250]: Cloaking enabled.
MSI (c) (04:B8) [10:55:39:250]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (04:B8) [10:55:39:250]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (3C:88) [10:55:39:265]: Grabbed execution mutex.
MSI (s) (3C:20) [10:55:39:265]: Resetting cached policy values
MSI (s) (3C:20) [10:55:39:265]: Machine policy value 'Debug' is 0
MSI (s) (3C:20) [10:55:39:265]: ******* RunEngine:
******* Product: e:6771b864b449c707fd961a7fd719a8c1SetupSqlRun_Tools.msi
******* Action:
******* CommandLine: **********
MSI (s) (3C:20) [10:55:39:265]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (3C:20) [10:55:39:281]: File will have security applied from OpCode.
MSI (s) (3C:20) [10:55:45:015]: End dialog not enabled
MSI (s) (3C:20) [10:55:45:015]: Original package ==> e:6771b864b449c707fd961a7fd719a8c1SetupSqlRun_Tools.msi
MSI (s) (3C:20) [10:55:45:015]: Package we're running from ==> C:WINNTInstaller19c5ce.msi
MSI (s) (3C:20) [10:55:45:046]: APPCOMPAT: looking for appcompat database entry with ProductCode '{58D379F7-62BC-4748-8237-FE071ECE797C}'.
MSI (s) (3C:20) [10:55:45:046]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (3C:20) [10:55:45:046]: MSCOREE already loaded, using loaded copy
MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'TransformsSecure' is 0
MSI (s) (3C:20) [10:55:45:046]: User policy value 'TransformsAtSource' is 0
MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'DisablePatch' is 0
MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (3C:20) [10:55:45:046]: APPCOMPAT: looking for appcompat database entry with ProductCode '{58D379F7-62BC-4748-8237-FE071ECE797C}'.
MSI (s) (3C:20) [10:55:45:046]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (3C:20) [10:55:45:046]: Transforms are not secure.
MSI (s) (3C:20) [10:55:45:046]: Command Line: USERNAME=SomeCompanyName COMPANYNAME=SomeCompanyName INSTALLSQLSHAREDDIR=C:Program FilesMicrosoft SQL Server SAMPLEDATABASESERVER=SomeMachineName STPSETUPTHREADID=1740 STPSETUPPROCESSID=260 EXTERNALCONTROL=1 ADDLOCAL=Client_Components,Connectivity,SDK,SQL_SSMSEE REBOOT=ReallySuppress CURRENTDIRECTORY=C:Program FilesMicrosoft SQL Server90Setup Bootstrap CLIENTUILEVEL=3 CLIENTPROCESSID=260 %HOMEPATH=Documents and SettingsSomeUserName %HOMEDRIVE=D: %HOMESHARE=
MSI (s) (3C:20) [10:55:45:046]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{89DAFCFE-ED1B-4EC7-82EE-1D153F4C0980}'.
MSI (s) (3C:20) [10:55:45:046]: Product Code passed to Engine.Initialize: ''
MSI (s) (3C:20) [10:55:45:046]: Product Code from property table before transforms: '{58D379F7-62BC-4748-8237-FE071ECE797C}'
MSI (s) (3C:20) [10:55:45:046]: Product Code from property table after transforms: '{58D379F7-62BC-4748-8237-FE071ECE797C}'
MSI (s) (3C:20) [10:55:45:046]: Product not registered: beginning first-time install
MSI (s) (3C:20) [10:55:45:046]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (3C:20) [10:55:45:046]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (3C:20) [10:55:45:046]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (3C:20) [10:55:45:046]: Adding new sources is allowed.
MSI (s) (3C:20) [10:55:45:046]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (3C:20) [10:55:45:046]: Package name extracted from package path: 'SqlRun_Tools.msi'
MSI (s) (3C:20) [10:55:45:062]: Package to be registered: 'sqlrun_tools.msi'
MSI (s) (3C:20) [10:55:45:062]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (3C:20) [10:55:45:062]: Machine policy value 'DisableMsi' is 0
MSI (s) (3C:20) [10:55:45:062]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (3C:20) [10:55:45:062]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (3C:20) [10:55:45:062]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (3C:20) [10:55:45:062]: Running product '{58D379F7-62BC-4748-8237-FE071ECE797C}' with elevated privileges: Product is assigned.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'SomeCompanyName'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding COMPANYNAME property. Its value is 'SomeCompanyName'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding INSTALLSQLSHAREDDIR property. Its value is 'C:Program FilesMicrosoft SQL Server'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding SAMPLEDATABASESERVER property. Its value is 'SomeMachineName'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding STPSETUPTHREADID property. Its value is '1740'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding STPSETUPPROCESSID property. Its value is '260'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding EXTERNALCONTROL property. Its value is '1'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding ADDLOCAL property. Its value is 'Client_Components,Connectivity,SDK,SQL_SSMSEE'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:Program FilesMicrosoft SQL Server90Setup Bootstrap'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '260'.
MSI (s) (3C:20) [10:55:45:062]: TRANSFORMS property is now:
MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '150'.
MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameApplication Data
MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameFavorites
MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameNetHood
MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameMy Documents
MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNamePrintHood
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameRecent
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameSendTo
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameTemplates
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersApplication Data
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameLocal SettingsApplication Data
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameMy DocumentsMy Pictures
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersStart MenuProgramsAdministrative Tools
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersStart MenuProgramsStartup
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersStart MenuPrograms
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersStart Menu
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersDesktop
MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameStart MenuProgramsAdministrative Tools
MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameStart MenuProgramsStartup
MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameStart MenuPrograms
MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameStart Menu
MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameDesktop
MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersTemplates
MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: C:WINNTFonts
MSI (s) (3C:20) [10:55:45:093]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:WINNTInstaller19c5ce.msi'.
MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'e:6771b864b449c707fd961a7fd719a8c1SetupSqlRun_Tools.msi'.
MSI (s) (3C:20) [10:55:45:093]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (3C:20) [10:55:45:093]: Machine policy value 'DisableRollback' is 0
MSI (s) (3C:20) [10:55:45:093]: User policy value 'DisableRollback' is 0
MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 4/20/2006 10:55:45 ===
MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'.
MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (3C:20) [10:55:45:093]: Doing action: INSTALL
MSI (s) (3C:20) [10:55:45:109]: Running ExecuteSequence
MSI (s) (3C:20) [10:55:45:109]: Doing action: SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F
Action start 10:55:45: INSTALL.
MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F property. Its value is 'C:WINNTsystem32'.
Action start 10:55:45: SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F.
MSI (s) (3C:20) [10:55:45:109]: Doing action: WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E
Action ended 10:55:45: SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F. Return value 1.
MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'.
Action start 10:55:45: WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:109]: Doing action: SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E
Action ended 10:55:45: WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'.
Action start 10:55:45: SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:109]: Doing action: WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E
Action ended 10:55:45: SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'.
Action start 10:55:45: WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:109]: Doing action: SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E
Action ended 10:55:45: WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'.
Action start 10:55:45: SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:125]: Doing action: WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E
Action ended 10:55:45: SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'.
Action start 10:55:45: WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:125]: Doing action: SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E
Action ended 10:55:45: WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'.
Action start 10:55:45: SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:125]: Doing action: WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E
Action ended 10:55:45: SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'.
Action start 10:55:45: WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:125]: Doing action: SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E
Action ended 10:55:45: WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'.
Action start 10:55:45: SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:125]: Doing action: WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E
Action ended 10:55:45: SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'.
Action start 10:55:45: WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:140]: Doing action: SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E
Action ended 10:55:45: WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'.
Action start 10:55:45: SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:140]: Doing action: WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E
Action ended 10:55:45: SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'.
Action start 10:55:45: WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:140]: Doing action: SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E
Action ended 10:55:45: WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'.
Action start 10:55:45: SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:140]: Doing action: WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E
Action ended 10:55:45: SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'.
Action start 10:55:45: WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:140]: Doing action: SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E
Action ended 10:55:45: WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'.
Action start 10:55:45: SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:156]: Doing action: WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E
Action ended 10:55:45: SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:156]: PROPERTY CHANGE: Adding WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'.
Action start 10:55:45: WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:156]: Doing action: SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E
Action ended 10:55:45: WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:156]: PROPERTY CHANGE: Adding SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'.
Action start 10:55:45: SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E.
MSI (s) (3C:20) [10:55:45:156]: Doing action: ProgramMenuFolder.ConfigurationTools1033
Action ended 10:55:45: SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E. Return value 1.
MSI (s) (3C:20) [10:55:45:156]: PROPERTY CHANGE: Adding ProgramMenuFolder.ConfigurationTools1033 property. Its value is 'D:Documents and SettingsAll UsersStart MenuPrograms'.
Action start 10:55:45: ProgramMenuFolder.ConfigurationTools1033.
MSI (s) (3C:20) [10:55:45:156]: Doing action: ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:45: ProgramMenuFolder.ConfigurationTools1033. Return value 1.
MSI (s) (3C:20) [10:55:45:156]: PROPERTY CHANGE: Adding ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2 property. Its value is 'C:Program Files'.
Action start 10:55:45: ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2.
MSI (s) (3C:20) [10:55:45:156]: Skipping action: SetMDACSxS (condition is false)
MSI (s) (3C:20) [10:55:45:156]: Doing action: LaunchConditions
Action ended 10:55:45: ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (3C:20) [10:55:45:156]: Note: 1: 2205 2: 3: LaunchCondition
MSI (s) (3C:20) [10:55:45:156]: Note: 1: 2228 2: 3: LaunchCondition 4: SELECT `Condition`, `Description` FROM `LaunchCondition`
Action start 10:55:45: LaunchConditions.
MSI (s) (3C:20) [10:55:45:156]: Doing action: StreamSupportFiles.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:45: LaunchConditions. Return value 0.
MSI (s) (3C:BC) [10:55:45:171]: Invoking remote custom action. DLL: C:WINNTInstallerMSI299.tmp, Entrypoint: StreamSupportFiles
MSI (s) (3C:D0) [10:55:45:171]: Generating random cookie.
MSI (s) (3C:D0) [10:55:45:171]: Created Custom Action Server with PID 616 (0x268).
MSI (s) (3C:70) [10:55:45:187]: Running as a service.
MSI (s) (3C:70) [10:55:45:187]: Hello, I'm your 32bit Impersonated custom action server.
Action start 10:55:45: StreamSupportFiles.D20239D7_E87C_40C9_9837_E70B8D4882C2.
Property(SQL): Setup Bootstrap Directory = C:Program FilesMicrosoft SQL Server90Setup Bootstrap
1: 0 2: Iterating through _sqlSupportFiles entries
Streamed sqlca.D20239D7_E87C_40C9_9837_E70B8D4882C2 to C:Program FilesMicrosoft SQL Server90Setup Bootstrapin{58D379F7-62BC-4748-8237-FE071ECE797C}sqlca.dll
MSI (s) (3C:20) [10:55:45:312]: Doing action: Do_LogInstallStart.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:45: StreamSupportFiles.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (3C:BC) [10:55:45:328]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29A.tmp, Entrypoint: Do_LogInstallStart
Action start 10:55:45: Do_LogInstallStart.D20239D7_E87C_40C9_9837_E70B8D4882C2.
Property(SQL): Setup Bootstrap Directory = C:Program FilesMicrosoft SQL Server90Setup Bootstrap
Property(SQL): CA DLL Path = C:Program FilesMicrosoft SQL Server90Setup BootstrapBin{58D379F7-62BC-4748-8237-FE071ECE797C}sqlca.dll
<Func Name='LaunchFunction'>
Function=Do_LogInstallStart
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_LogInstallStart
PerfTime Start: Do_LogInstallStart : Thu Apr 20 10:55:46 2006
<Func Name='Do_LogInstallStart'>
<EndFunc Name='Do_LogInstallStart' Return='0' GetLastError='203'>
PerfTime Stop: Do_LogInstallStart : Thu Apr 20 10:55:46 2006
<EndFunc Name='LaunchFunction' Return='0' GetLastError='203'>
MSI (s) (3C:20) [10:55:46:625]: Doing action: GetDefaultDomain.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:46: Do_LogInstallStart.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (3C:BC) [10:55:46:625]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29B.tmp, Entrypoint: GetDefaultDomain
Action start 10:55:46: GetDefaultDomain.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=GetDefaultDomain
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: GetDefaultDomain
PerfTime Start: GetDefaultDomain : Thu Apr 20 10:55:46 2006
<Func Name='GetDefaultDomain'>
MSI (s) (3C!38) [10:55:46:687]: PROPERTY CHANGE: Adding DefaultDomain property. Its value is 'SomeDomainName'.
MSI (s) (3C!38) [10:55:46:687]: PROPERTY CHANGE: Adding QuotedDefaultDomain property. Its value is 'SomeDomainName'.
MSI (s) (3C!38) [10:55:46:687]: PROPERTY CHANGE: Adding QuotedComputerName property. Its value is 'SomeMachineName'.
PerfTime Stop: GetDefaultDomain : Thu Apr 20 10:55:46 2006
<EndFunc Name='LaunchFunction' Return='0' GetLastError='997'>
MSI (s) (3C:20) [10:55:46:687]: Doing action: RestoreSetupParams.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:46: GetDefaultDomain.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (3C:BC) [10:55:46:687]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29C.tmp, Entrypoint: RestoreSetupParams
Action start 10:55:46: RestoreSetupParams.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=RestoreSetupParams
Skipping Action: RestoreSetupParams (Condition is false)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='203'>
MSI (s) (3C:20) [10:55:46:718]: Doing action: ShutdownServiceManager.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:46: RestoreSetupParams.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (3C:BC) [10:55:46:718]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29D.tmp, Entrypoint: ShutdownServiceManager
Action start 10:55:46: ShutdownServiceManager.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=ShutdownServiceManager
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: ShutdownServiceManager
PerfTime Start: ShutdownServiceManager : Thu Apr 20 10:55:46 2006
<Func Name='ShutdownServiceManager'>
<EndFunc Name='ShutdownServiceManager' Return='0' GetLastError='2'>
PerfTime Stop: ShutdownServiceManager : Thu Apr 20 10:55:46 2006
<EndFunc Name='LaunchFunction' Return='0' GetLastError='2'>
MSI (s) (3C:20) [10:55:46:750]: Doing action: Write_sqlWellKnownAccountNames.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:46: ShutdownServiceManager.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (3C:BC) [10:55:46:765]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29E.tmp, Entrypoint: Write_sqlWellKnownAccountNames
Action start 10:55:46: Write_sqlWellKnownAccountNames.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=Write_sqlWellKnownAccountNames
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: Write_sqlWellKnownAccountNames
PerfTime Start: Write_sqlWellKnownAccountNames : Thu Apr 20 10:55:46 2006
<Func Name='Write_sqlWellKnownAccountNames'>
MSI (s) (3C!38) [10:55:46:781]: PROPERTY CHANGE: Adding AdministratorsGroup property. Its value is 'BUILTINAdministrators'.
MSI (s) (3C!38) [10:55:46:796]: PROPERTY CHANGE: Adding UsersGroup property. Its value is 'BUILTINUsers'.
MSI (s) (3C!38) [10:55:46:812]: PROPERTY CHANGE: Adding LocalSystemAccount property. Its value is 'NT AUTHORITYSYSTEM'.
<EndFunc Name='Write_sqlWellKnownAccountNames' Return='0' GetLastError='1332'>
PerfTime Stop: Write_sqlWellKnownAccountNames : Thu Apr 20 10:55:46 2006
<EndFunc Name='LaunchFunction' Return='0' GetLastError='1332'>
MSI (s) (3C:20) [10:55:46:843]: Skipping action: PropSetSQLAutoStart.D20239D7_E87C_40C9_9837_E70B8D4882C2 (condition is false)
MSI (s) (3C:20) [10:55:46:843]: Doing action: CheckIIS.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:46: Write_sqlWellKnownAccountNames.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (3C:BC) [10:55:46:843]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29F.tmp, Entrypoint: CheckIIS
Action start 10:55:46: CheckIIS.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=CheckIIS
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: CheckIIS
PerfTime Start: CheckIIS : Thu Apr 20 10:55:46 2006
<Func Name='CheckIIS'>
MSI (s) (3C!38) [10:55:46:906]: PROPERTY CHANGE: Adding IISCHECKED property. Its value is '0'.
MSI (s) (3C!38) [10:55:46:921]: PROPERTY CHANGE: Adding SqlASPNETInstalled property. Its value is '1'.
Skipping RS Feature Dependency Check
<Func Name='GetXMLAttributeValue'>
Error to find XML node /configuration/system.web/compilation
<EndFunc Name='GetXMLAttributeValue' Return='2' GetLastError='0'>
Failed to get ModuleID_RS_Server when getting the ASP Temp directory.
MSI (s) (3C!38) [10:55:47:031]: PROPERTY CHANGE: Adding SqlCOMPlusInstalled property. Its value is '1'.
Could not get the ASP temp directory.
MSI (s) (3C!38) [10:55:47:031]: PROPERTY CHANGE: Adding RSPREREQUISITECHECKED property. Its value is '1'.
MSI (s) (3C!38) [10:55:47:031]: PROPERTY CHANGE: Modifying IISCHECKED property. Its current value is '0'. Its new value: '1'.
SqlCOMPlusInstalled value set to 1
<EndFunc Name='CheckIIS' Return='0' GetLastError='0'>
PerfTime Stop: CheckIIS : Thu Apr 20 10:55:47 2006
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (3C:20) [10:55:47:031]: Doing action: Create_RSGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:47: CheckIIS.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (3C:BC) [10:55:47:046]: Invoking remote custom action. DLL: C:WINNTInstallerMSI2A0.tmp, Entrypoint: Create_RSGUID
Action start 10:55:47: Create_RSGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=Create_RSGUID
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: Create_RSGUID
PerfTime Start: Create_RSGUID : Thu Apr 20 10:55:47 2006
<Func Name='Create_RSGUID'>
MSI (s) (3C!38) [10:55:47:156]: PROPERTY CHANGE: Adding RSGUIDVALUE property. Its value is '{91051fc0-581b-4a79-8672-9ae717477574}'.
Starting Create_RSGUID
Created new GUID: {91051fc0-581b-4a79-8672-9ae717477574}
<EndFunc Name='Create_RSGUID' Return='0' GetLastError='0'>
PerfTime Stop: Create_RSGUID : Thu Apr 20 10:55:47 2006
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (3C:20) [10:55:47:171]: Doing action: CheckPassedPropertiesLength.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 10:55:47: Create_RSGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (3C:BC) [10:55:47:171]: Invoking remote custom action. DLL: C:WINNTInstallerMSI2A1.tmp, Entrypoint: CheckPassedPropertiesLength
Action start 10:55:47: CheckPassedPropertiesLength.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=CheckPassedPropertiesLength
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: CheckPassedPropertiesLength
PerfTime Start: CheckPassedPropertiesLength : Thu Apr 20 10:55:47 2006
<Func Name='CheckPassedPropertiesLength'>
CheckPassedPropertiesLength: Property USERNAME is of legal length.
MSI (s) (3C!38) [10:55:47:203]: PROPERTY CHANGE: Adding RSSqlPoolLimit property. Its value is '100'.
CheckPassedPropertiesLength: Property COMPANYNAME is of legal length.
<EndFunc Name='CheckPassedPropertiesLength' Return='0' GetLastError='0'>
PerfTime Stop: CheckPassedPropertiesLength : Thu Apr 20 10:55:47 2006
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (3C:20) [10:55:47:203]: Skipping action: CheckForGDRPatch.D20239D7_E87C_40C9_9837_E70B8D4882C2 (condition is false)
MSI (s) (3C:20) [10:55:47:203]: Doing action: FindRelatedProducts
Action ended 10:55:47: CheckPassedPropertiesLength.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
Action start 10:55:47: FindRelatedProducts.
MSI (s) (3C:20) [10:55:47:218]: PROPERTY CHANGE: Adding UPGRADETOOLS90 property. Its value is '{A30965BD-2D4D-45CE-8F04-6A6889818CF1}'.
MSI (s) (3C:20) [10:55:47:218]: PROPERTY CHANGE: Adding PRODUCT_TOOLS property. Its value is '{A30965BD-2D4D-45CE-8F04-6A6889818CF1}'.
MSI (s) (3C:20) [10:55:47:218]: Doing action: FindUpgradeableProduct
Action ended 10:55:47: FindRelatedProducts. Return value 1.
MSI (s) (3C:BC) [10:55:47:218]: Invoking remote custom action. DLL: C:WINNTInstallerMSI2A2.tmp, Entrypoint: FindUpgradeableProduct
Action start 10:55:47: FindUpgradeableProduct.
<Func Name='LaunchFunction'>
Function=FindUpgradeableProduct
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: FindUpgradeableProduct
PerfTime Start: FindUpgradeableProduct : Thu Apr 20 10:55:47 2006
<Func Name='FindUpgradeableProduct'>
Warning 28123.Warning: SQL Server Setup cannot install this feature because a different edition of this feature is already installed. For more information, see 'Version and Edition Upgrades' in SQL Server Books Online.
<EndFunc Name='FindUpgradeableProduct' Return='259' GetLastError='0'>
PerfTime Stop: FindUpgradeableProduct : Thu Apr 20 11:08:55 2006
Gathering darwin properties for failure handling.
Loaded DLL:
C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll
Version:
2.0.3609.0
<EndFunc Name='LaunchFunction' Return='259' GetLastError='0'>
Action ended 11:08:55: FindUpgradeableProduct. Return value 5.
Action ended 11:08:55: INSTALL. Return value 1.
Property(S): ProductCode = {58D379F7-62BC-4748-8237-FE071ECE797C}
Property(S): ProductLanguage = 1033
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 9.1.2047.00
Property(S): MEDIAPACKAGEPATH = Setup
Property(S): ALLUSERS = 1
Property(S): NULLGUID = {00000000-0000-0000-0000-000000000000}
Property(S): ASPNetVersion = 2.0.50727
Property(S): ARPHELPLINK = http://go.microsoft.com/fwlink/?LinkId=52152
Property(S): ARPPRODUCTICON = ARPIcon.ico
Property(S): ARPNOREPAIR = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): MsiHiddenProperties = SQLPASSWORD;AGTPASSWORD;ASPASSWORD;RSPASSWORD;SQLBROWSERPASSWORD;RSSQLPASSWORD;RSSQLPassword;RSSQLPasswordQuoted;RSSETUPPASSWORD;RSSetupPassword;SAPWD;saPWD;UPGRADEPWD;SqlUpgradePwd;SQLPassword;ServicePassword;ADMINPASSWORD;PIDKEY;FTEPassword.68C6D15C_77E0_11D5_8528_00C04F68155C;checksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C;checksum.;DigitalProductID;DPID;Do_sqlScript.D20239D7_E87C_40C9_9837_E70B8D4882C2;Rollback_SqlConnection.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_XmlSingleNode.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_RSSetting.D20239D7_E87C_40C9_9837_E70B8D4882C2;PID;ProductID;RSUPGRADEPASSWORD;Do_RSSetSharePointExclusionPath.D20239D7_E87C_40C9_9837_E70B8D4882C2
Property(S): SecureCustomProperties = SQL_SHOWLIC;PRODUCT_TOOLS;UPGRADETOOLS90;PRODUCT_TOOLS_LCID
Property(S): SqlServerBuild = 1
Property(S): SqlCluster = 0
Property(S): INSTALLLEVEL = 90
Property(S): FXAssemblyVersion = 2.0.0.0
Property(S): VSAssemblyVersion = 8.0.0.0
Property(S): SqlErrorReporting = #0
Property(S): SqlSqmReporting = #0
Property(S): SqlEnableRanu = 0
Property(S): SqlPatchLevel = 9.1.2047
Property(S): ReleaseProductVersion = 9.00.2047.00
Property(S): SpLevel = 1
Property(S): PIDTemplate = <````=````=````=````=`````>@@@@@
Property(S): UPGRADETOOLS90 = {A30965BD-2D4D-45CE-8F04-6A6889818CF1}
Property(S): UpgradeCode = {FED8B2D9-159B-41B0-826C-E3E0F8ADE264}
Property(S): PRODUCT_TOOLS = {A30965BD-2D4D-45CE-8F04-6A6889818CF1}
Property(S): BOL_INSTALL = SQLServer90
Property(S): ProgramFilesFolder = C:Program Files
Property(S): DefaultUIFont = Tahoma8
Property(S): VersionNT = 500
Property(S): INSTALLSQLSHAREDDIR = C:Program FilesMicrosoft SQL Server
Property(S): LocalSystemAccount = NT AUTHORITYSYSTEM
Property(S): DefaultBuiltInAccount = NetworkServiceAccount
Property(S): SqlDisableNetworkProtocols = 1
Property(S): SimpleFeatureTitle_Feat6 = Client Components
Property(S): SimpleFeature_Feat6_Expr = &Workstation components and development tools
Property(S): Service_AGT = SQL Server Agent
Property(S): Service_OLAP = SQL Server Analysis Services
Property(S): Service_SQL = SQL Server
Property(S): Service_RS = SQL Server Reporting Services
Property(S): Service_Browse = SQL Server Browser
Property(S): Service_DTS = SQL Server Integration Services
Property(S): Service_ADHelper = SQL Server Active Directory Helper
Property(S): Service_SQLWriter = SQL Server VSS Writer
Property(S): Service_FTS = SQL Server FullText Search
Property(S): ServiceDesc_RS = Manages, executes, renders, schedules and delivers reports.
Property(S): ServiceDesc_AGT = Executes jobs, monitors SQL Server, and fires alerts, and allows automation of some administrative tasks.
Property(S): ServiceDesc_SQL = Provides storage, processing and controlled access of data and rapid transaction processing.
Property(S): ServiceDesc_Browse = Provides SQL Server connection information to client computers.
Property(S): ServiceDesc_OLAP = Supplies online analytical processing (OLAP) and data mining functionality for business intelligence applications.
Property(S): ServiceDesc_DTS = Provides management support for SSIS package storage and execution.
Property(S): ServiceDesc_ADHelper = Enables integration with Active Directories.
Property(S): ServiceDesc_SQLWriter = Provides the interface to backup/restore Microsoft SQL server through the Windows VSS infrastructure.
Property(S): ServiceDesc_FTS = Quickly creates full-text indexes on content and properties of structured and semi-structured data to allow fast linguistic searches on this data.
Property(S): ServiceGroupDesc_ADHelper = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Active Directory Helper in SQL Server 2005.
Property(S): ServiceGroupDesc_AGT = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Agent in SQL Server 2005.
Property(S): ServiceGroupDesc_OLAP = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Analysis Services in SQL Server 2005.
Property(S): ServiceGroupDesc_Browse = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Browser in SQL Server 2005.
Property(S): ServiceGroupDesc_DTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Integration Services in SQL Server 2005.
Property(S): ServiceGroupDesc_FTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005.
Property(S): ServiceGroupDesc_NS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Notification Services in SQL Server 2005.
Property(S): ServiceGroupDesc_RS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005.
Property(S): ServiceGroupDesc_RSWeb = Members in the group have the required access to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005
Property(S): ServiceGroupDesc_SQL = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005.
Property(S): ServiceGroupDesc_SQL_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server in SQL Server 2005.
Property(S): ServiceGroupDesc_FTS_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Full Text Search in SQL Server 2005.
Property(S): DlgService_AGT = SQL Server Agent
Property(S): DlgService_OLAP = Analysis Services
Property(S): DlgService_SQL = SQL Server
Property(S): DlgService_RS = Reporting Services
Property(S): DlgService_Browse = SQL Browser
Property(S): AutoStart_AGT = SQL Server A&gent
Property(S): AutoStart_OLAP = &Analysis Services
Property(S): AutoStart_SQL = &SQL Server
Property(S): AutoStart_RS = Rep&orting Services
Property(S): AutoStart_Browse = SQL Bro&wser
Property(S): AutoStart_FTS = SQL Server &FullText Search
Property(S): _AuthenticationType = Windows
Property(S): SQL_rgCollation = 1
Property(S): OLAP_rgCollation = 0
Property(S): _InstanceType = Default
Property(S): _LicensingMode = PerSeat
Property(S): AGTLogin = DomainAccount
Property(S): ASLogin = DomainAccount
Property(S): SingleLogin = DomainAccount
Property(S): SQLLogin = DomainAccount
Property(S): RSLogin = DomainAccount
Property(S): SQLBROWSERLogin = DomainAccount
Property(S): _UpgradeLogon = Windows
Property(S): _SampleDBMode = InstallSD
Property(S): ButtonTextStyle = {ButtonTextStyle}
Property(S): DlgTextStyle = {DlgTextStyle}
Property(S): DlgTextStyleB = {DlgTextStyleB}
Property(S): DlgTitleStyle = {DlgTitleStyle}
Property(S): DlgTitleStyleB = {DlgTitleStyleB}
Property(S): FixedStyle = {FixedStyle}
Property(S): T_DataFree = T_DataFree
Property(S): T_DataReq = T_DataReq
Property(S): T_ProgramFree = T_ProgramFree
Property(S): T_ProgramReq = T_ProgramReq
Property(S): T_IPVal = T_IPVal
Property(S): T_Subnet = T_Subnet
Property(S): ErrorDialog = ErrorDlg
Property(S): ENABLERANU = 1
Property(S): AccountForAllNodesDlg_Desc = Account for remote setup.
Property(S): AccountForAllNodesDlg_Text = Enter a user name and password that is a valid administrator account for all nodes in the cluster system. This will be used during setup only.
Property(S): AccountForAllNodesDlg_Title = Remote Account Information
Property(S): Authentication_ConfirmPWText = Confirm &password:
Property(S): Authentication_DlgDesc = The authentication mode specifies the security used when connecting to SQL Server.
Property(S): Authentication_DlgText = Select the authentication mode to use for this installation.
Property(S): Authentication_DlgTitle = Authentication Mode
Property(S): Authentication_EnterPWText = &Enter password:
Property(S): Authentication_saPasswordText = Specify the sa logon password below:
Property(S): Authentication_SQL = &Mixed Mode (Windows Authentication and SQL Server Authentication)
Property(S): Authentication_Windows = &Windows Authentication Mode
Property(S): BrowseFolder_ComboText = &Install in:
Property(S): BrowseFolder_DlgDesc = You can select a different folder for installation.
Property(S): BrowseFolder_DlgTitle = Change Folders
Property(S): BrowseFolder_TailText = Installation &path:
Property(S): BrowseFolder_TailTextShared = The SQL Server shared path has already been configured.
Property(S): ButtonText_Abort = &Abort
Property(S): ButtonText_Add = &Add
Property(S): ButtonText_Back = < &Back
Property(S): ButtonText_Browse = B&rowse...
Property(S): ButtonText_Cancel = Cancel
Property(S): ButtonText_Close = &Close
Property(S): ButtonText_Complete = &Complete
Property(S): ButtonText_ContinueLater = &Continue Later
Property(S): ButtonText_DiskCost = &Disk Cost...
Property(S): ButtonText_Exit = &Exit
Property(S): ButtonText_Finish = &Finish
Property(S): ButtonText_Help = &Help
Property(S): ButtonText_Ignore = &Ignore
Property(S): ButtonText_Install = &Install
Property(S): ButtonText_Minimal = &Minimal
Property(S): ButtonText_New = &New
Property(S): ButtonText_Next = &Next >
Property(S): ButtonText_No = &No
Property(S): ButtonText_Normal = &Normal
Property(S): ButtonText_OK = OK
Property(S): ButtonText_Open = &Open
Property(S): ButtonText_Reinstall = &Reinstall
Property(S): ButtonText_ReinstallMode = &Select the reinstall mode
Property(S): ButtonText_Remove = &Remove
Property(S): ButtonText_Remove2 = &Remove
Property(S): ButtonText_Report = &Report
Property(S): ButtonText_Reset = &Reset
Property(S): ButtonText_Restore = &Restore
Property(S): ButtonText_Resume = &Resume
Property(S): ButtonText_Retry = &Retry
Property(S): ButtonText_Up = &Up
Property(S): ButtonText_Yes = &Yes
Property(S): Cancel_DlgDesc = Are you sure you want to cancel the installation?
Property(S): Cancel_DlgText = The installation is not complete. If you exit the wizard now, Microsoft SQL Server will not be installed.
Property(S): ClusterGroup_DlgDesc = Select the cluster group where the virtual server resources will be installed.
Property(S): ClusterGroup_DlgStaticTextAvailable = Available cluster groups:
Property(S): ClusterGroup_DlgStaticTextUnavailable = Unavailable cluster groups:
Property(S): ClusterGroup_DlgTitle = Cluster Group Selection
Property(S): ClusterNodeDlg_ButtonTextAdd = &Add ->
Property(S): ClusterNodeDlg_ButtonTextRemove = <- &Remove
Property(S): ClusterNodeDlg_StaticTextAvailableNode = Available nodes:
Property(S): ClusterNodeDlg_StaticTextRequiredNode = Required node:
Property(S): ClusterNodeDlg_StaticTextSelectedNode = Selected nodes:
Property(S): ClusterNodeDlg_StaticTextUnavailableNode = Unavailable nodes:
Property(S): ClusterNodeDlg_Text = Select the nodes to include in the virtual server.
Property(S): ClusterNodeDlg_Title = Cluster Node Configuration
Property(S): Collation_Service = S&ervice:
Property(S): Collation_Service1 = Collation settings for service:
Property(S): Collation_AS_Collation = Analysis Services Collation:
Property(S): Collation_ChkBinary = Binary
Property(S): Collation_ChkBinary2 = Binary - code point
Property(S): Collation_ChkCase = Case - sensitive
Property(S): Collation_ChkAccent = Accent - sensitive
Property(S): Collation_ChkKana = Kana - sensitive
Property(S): Collation_ChkWidth = Width - sensitive
Property(S): Collation_Designator = Collation &designator and sort order:
Property(S): Collation_DlgDesc = Collation settings define the sorting behavior for your server.
Property(S): Collation_DlgCusomizeText = &Customize for each service account
Property(S): Collation_DlgTitle = Collation Settings
Property(S): Collation_SQL = &SQL collations (used for compatibility with previous versions of SQL Server)
Property(S): DiskPrompt = Please insert next disk
Property(S): DiskSpace_DlgDesc = Disk space required for the installation exceeds available disk space.
Property(S): DiskSpace_DlgDesc1 = The available disk space and the space required for installation are shown below.
Property(S): DiskSpace_DlgText = The highlighted volumes, if any, do not have enough disk space available for the currently selected features. Click Disk Cleanup to free disk space and then click Resume to continue the installation, or click Exit to exit the wizard.
Property(S): DiskSpace_DlgTitle = Out of Disk Space
Property(S): DiskSpace_DlgTitle1 = Disk Cost
Property(S): DiskSpace_LBDiskCleanup = Use disk cleanup to free more disk space by removing unneeded files.
Property(S): REASON_ADMIN_DISABLED = Administrative shares must be enabled in order to let Setup access remote nodes
Property(S): REASON_DARWIN_VER = Windows installer is not present or has not the required version
Property(S): REASON_DUP_INSTANCE_NAME_CLST = An instance with the same name is already installed in one or more nodes of the cluster.
Property(S): REASON_GROUP_HOSTS_VS = Already contains a SQL Virtual Server
Property(S): REASON_GROUP_NO_DISK = Does not contain any valid cluster disk
Property(S): ERROR_INVALID_PID = This is an invalid Product Key value. Please check the number located on your Product Key sticker.
Property(S): ERROR_INVALID_USERNAME = The Name is required for the installation.
Property(S): REASON_NODE_DOWN = The node is down or unavailable
Property(S): REASON_NOT_KNOWN = Unknown
Property(S): REASON_PENDING_REBOOT = The node must be rebooted before running setup
Property(S): REASON_SCC_CHECK_FAILED = A SCC check failed on the node
Property(S): ERROR_UNKNOWN = Installation error. Install it by running setup.exe.
Property(S): REASON_VERSION_ADDNODE = Adding nodes to the Virtual Server definition using a newer version of Setup is not allowed.
Property(S): REASON_OS_VER = SQL Server requires Windows 2000 Service Pack 4, or Windows XP Service Pack 1 or later for installation.
Property(S): REASON_OS_TYPE = This version of SQL Server is not supported on this version of Windows.
Property(S): Exit_DlgDesc1 = Setup has installed Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc2 = Setup has removed Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc3 = Setup has updated Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc4 = Setup has reinstalled Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc5 = Setup has upgraded Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgTitle = Completing Microsoft SQL Server Setup
Property(S): SimpleFeature_DlgDesc = Select the components to install or upgrade.
Property(S): SimpleFeature_DlgTitle = Components to Install
Property(S): SimpleFeature_Feat1 = &SQL Server Database Services
Property(S): SimpleFeature_SQLEngineVS = Create a SQL Server failover cluster
Property(S): SimpleFeature_Feat2 = &Analysis Services
Property(S): SimpleFeature_AnalysisServerVS = Create an Analysis Server failover cluster
Property(S): SimpleFeature_Feat3 = &Reporting Services
Property(S): SimpleFeature_Feat4 = N&otification Services
Property(S): SimpleFeature_Feat5 = &Integration Services
Property(S): SimpleFeature_Feat6 = &Workstation components, Books Online and development tools
Property(S): SimpleFeatureTitle_Feat1 = SQL Server Database Services
Property(S): SimpleFeatureTitle_Feat2 = Analysis Services
Property(S): SimpleFeatureTitle_Feat3 = Reporting Services
Property(S): SimpleFeatureTitle_Feat4 = Notification Services
Property(S): SimpleFeatureTitle_Feat5 = Integration Services
Property(S): SimpleFeature_Advanced = A&dvanced
Property(S): SimpleFeature_AdvancedText = For more options, click Advanced.
Property(S): SimpleFeature_Components = Components to be installed
Property(S): SimpleFeature_OutOfSpace = There is not enough disk space to install the selected components. Click Advanced for more options.
Property(S): Feature_DlgDesc = Select the program features you want installed.
Property(S): Feature_DlgText = Click an icon in the following list to change how a feature is installed.
Property(S): Feature_DlgTitle = Feature Selection
Property(S): Feature_FeatureFrame = Feature description
Property(S): Feature_GroupBox1 = Installation path
Property(S): FileInUse_DlgDesc = Some files that need to be updated are currently in use.
Property(S): FileInUse_DlgText = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
Property(S): FileInUse_DlgTitle = Files in Use
Property(S): InitDlg_Title = Microsoft SQL Server Installation
Property(S): InitDlg_Desc = Setup is preparing to continue with the installation.
Property(S): InitDlg_Text = Please wait while setup prepares to continue with the installation.
Property(S): Instance_Default = &Default instance
Property(S): Instance_DlgDesc = You can install a default instance or you can specify a named instance.
Property(S): Instance_DlgText = Provide a name for the instance. For a default installation, click Default instance and click Next. To upgrade an existing default instance, click Default instance. To upgrade an existing named instance select Named instance and specify the instance name.
Property(S): Instance_DlgText1 = To view a list of existing instances and components click on Installed instances.
Property(S): Instance_DlgTitle = Instance Name
Property(S): Instance_Named = N&amed instance
Property(S): IPAddress_DlgDesc = Enter virtual server information.
Property(S): IPAddress_DlgStaticTextClusterIP = Network address:
Property(S): IPAddress_DlgStaticTextIPAddress = &IP address:
Property(S): IPAddress_DlgStaticTextIPSel = &Selected networks and IP addresses:
Property(S): IPAddress_DlgStaticTextNetToUse = N&etwork to use:
Property(S): IPAddress_DlgStaticTextSubnet = Network subnet:
Property(S): IPAddress_DlgStaticTextVSName = Virtual server name:
Property(S): IPAddress_DlgText = Enter an IP address for the virtual server. To add IP addreses for additional networks, click Add.
Property(S): IPAddress_DlgTitle = Virtual Server Configuration
Property(S): License_Devices = devices
Property(S): License_Processors = processors
Property(S): LicenseModeDlg_DlgDesc = SQL server supports two client licensing modes: per seat licensing and processor licensing.
Property(S): LicenseModeDlg_DlgText = Choose the appropriate licensing modes.
Property(S): LicenseModeDlg_DlgText1 = Per seat license: each device that accesses Microsoft SQL Server requires a separate license.
Property(S): LicenseModeDlg_DlgText2 = Processor license: each processor on this server requires a separate license.
Property(S): LicenseModeDlg_DlgTitle = Licensing Mode
Property(S): LicenseModeDlg_Processor = &Processor license for
Property(S): LicenseModeDlg_RadioButtonGroup = Licensing mode
Property(S): LicenseModeDlg_Seat = Per &seat license for
Property(S): Maintenance_ChgLabel = Ch&ange Installed Components
Property(S): Maintenance_ChgLabelCl = &Maintain the Virtual Server
Property(S): Maintenance_ChgText = Maintain features of this instance.
Property(S): Maintenance_ChgTextCl = Add or remove nodes to the virtual server.
Property(S): Maintenance_DlgDesc = You can change or remove this instance of SQL Server.
Property(S): Maintenance_DlgTitle = Change or Remove Instance
Property(S): Maintenance_RmvLabel = R&emove Microsoft SQL Server
Property(S): Maintenance_RmvText = Remove all features of this existing installation from your computer.
Property(S): Maintenance_RmvTextCl = Remove the virtual server from your cluster.
Property(S): Maintenance_ChgLabelResume = Complete the &suspended installation
Property(S): Maintenance_ChgTextResume = Complete the suspended installation of Microsoft SQL Server on your computer.
Property(S): Progress_DlgDesc1 = The program features you selected are being installed.
Property(S): Progress_DlgDesc2 = The Microsoft SQL Server is being removed.
Property(S): Progress_DlgDesc3 = Setup is installing the components you selected.
Property(S): Progress_DlgDesc4 = The Microsoft SQL Server is being reinstalled.
Property(S): Progress_DlgText1 = Please wait while Setup installs Microsoft SQL Server. Installation may take several minutes.
Property(S): Progress_DlgText2 = Please wait while Setup removes Microsoft SQL Server. This may take several minutes.
Property(S): Progress_DlgText3 = Please wait while Setup updates Microsoft SQL Server. This may take several minutes.
Property(S): Progress_DlgText4 = Please wait while Setup reinstalls Microsoft SQL Server. Installation may take several minutes.
Property(S): Progress_DlgTitle1 = Installing Microsoft SQL Server
Property(S): Progress_DlgTitle2 = Removing Microsoft SQL Server
Property(S): Progress_DlgTitle3 = Configuring Microsoft SQL Server
Property(S): Progress_DlgTitle4 = Reinstalling Microsoft SQL Server
Property(S): Progress_lbStatus = Status:
Property(S): Register_CompLabel = C&ompany:
Property(S): Register_DlgSpec = The following information will personalize your installation.
Property(S): Register_DlgText = The Name field must be filled in prior to proceeding. The Company field is optional.
Property(S): Register_DlgText1 = Please enter your 25 character Product Key. You can find this number on the yellow sticker in the CD liner notes or the CD sleeve.
Property(S): Register_DlgTitle = Registration Information
Property(S): Register_NameLabel = N&ame:
Property(S): Resume_ResumeText = Setup will complete the suspended installation of Microsoft SQL Server on your computer. To continue, click Next.
Property(S): Resume_TextLine1 = Microsoft SQL Server Installation Wizard
Property(S): ServiceAccountDlg_Advanced = &Customize for each service account
Property(S): ServiceAccountDlg_Autostart = Start services at the end of setup
Property(S): ServiceAccountDlg_AutostartServices = Start services at the end of setup
Property(S): ServiceAccountDlg_DlgDesc = Service accounts define which accounts to log in.
Property(S): ServiceAccountDlg_DlgTitle = Service Account
Property(S): ServiceAccountDlg_Domain = Use a domain use&r account
Property(S): ServiceAccountDlg_DomainLabel = &Domain:
Property(S): ServiceAccountDlg_BuiltIn = Use the built-in S&ystem account
Property(S): ServiceAccountDlg_PasswordLabel = &Password:
Property(S): ServiceAccountDlg_Service = S&ervice:
Property(S): ServiceAccountDlg_Service1 = Service:
Property(S): ServiceAccountDlg_UsernameLabel = &Username:
Property(S): Setup = Setup
Property(S): StartCopy_DlgDesc = Setup is ready to begin installation.
Property(S): StartCopy_DlgDescReinst = Setup is ready to begin reinstallation.
Property(S): StartCopy_DlgDescRemove = You have chosen to remove the program from your system.
Property(S): StartCopy_DlgDescRemoveCl = You have chosen to remove the program from your cluster.
Property(S): StartCopy_DlgDescVSConfig = Setup is ready to begin updating your virtual server.
Property(S): StartCopy_DlgText = Setup has enough information to start copying the program files. To proceed, click Install. To change any of your installation settings, click Back. To exit setup, click Cancel.
Property(S): StartCopy_DlgText2 = Click Cancel to exit setup.
Property(S): StartCopy_DlgTextConfig = Setup has enough information to start installation. Click Install to proceed.
Property(S): StartCopy_DlgTextReinstData = You have chosen to re-install all features of existing installation including data files, and therefore overwrite the system database. Click Reinstall to proceed.
Property(S): StartCopy_DlgTextReinst = You have chosen to re-install all features of existing installation. Click Reinstall to proceed.
Property(S): StartCopy_DlgTextRemove = Click Remove to remove Microsoft SQL Server from your computer. After removal, this program will no longer be available for use.
Property(S): StartCopy_DlgTextRemoveCl = Click Remove to remove Microsoft SQL Server from your cluster. After removal, this program will no longer be available for use.
Property(S): StartCopy_DlgTextUnchanged = You did not change your virtual server configuration.
Property(S): StartCopy_DlgTitle = Ready to Install
Property(S): StartCopy_DlgTitleConfig = Ready to Update
Property(S): StartCopy_DlgTitleReinst = Ready to Reinstall
Property(S): StartCopy_DlgTitleRemove = Remove Microsoft SQL Server
Property(S): StaticUserName = Account:
Property(S): StaticUserPassword = &Password:
Property(S): TextDataDir = &Data files:
Property(S): TextProgramFileDir = Program files
View 5 Replies
View Related
Sep 22, 2007
Hi!
I am getting error when trying to install SQL 2005 express edition on Windows Vista (32-bit). It says that I don't have the framework (or it's corrupt), but I know that i don't need to install it again because it cames already with Vista.
I tried to install the framework, but it says that i've already the framework installed.
Any help or pointers would be greatly appreciated.
Thank you!
Monica
View 1 Replies
View Related
Mar 12, 2007
Hello!
Has i install SQL Server 2005 Express Edition with Advanced Services but why that Report Manager it was not installed. To me will not address under the reference http: // localhost/reports$SQLExpress since such catalogue is not present in IIS. In what there can be a problem?
Thank's
View 3 Replies
View Related
Mar 22, 2008
I receive the error:
Installation Failure
Error Code: 0x734C
Try to install the update again, or request help from one of the following resources.
For self-help options:
Frequently Asked Questions
Find Solutions
Windows Update Newsgroup
For assisted support options:
Microsoft Online Assisted Support (no-cost for issues related to getting updates)
nothing seems to be available for this error.
any ideas?
View 4 Replies
View Related
Apr 30, 2007
Don't know if this is the appropriate forum...
I have encountered a showstopper problem during installation. I have installed SSEE on a fresh XP, all the checks but memory requirements passed. In the final stage of the install, during the "real work", the Client Component installation failed due to missing ASP.NET state service (? spelling). After the failure the installation continued, but marked both the db engine and the management studio failed. Despite this, management studio was installed and later I have removed it with the control panel applet.
I have found a service (executable: aspnet_state.exe), started it and retried the installation. It failed again so I have removed everything installed except the VSS writer and started it again. This time the installation completed (and finally got BIDS).
Is it enough to start this ASP service manually for a painless install? I don't want to play this "on the field" ever...
View 17 Replies
View Related
Mar 14, 2007
Hi everyone...
I'm facing a problem while installing the SQL Server 2005 Express on Windows 2000 Pro with SP4.
After finishing the downloading from Microsoft I start the installation and things seems to go ok but during Extracting Files step a message appears "SQL Server Setup unexpectedly failed. For more information, review the setup summary log file in %Program Files%Microsoft SQL Server90Setup BootstrapLOGSummary.txt" and it terminates the installation.
I located the log file and open it but can't understand the problem..I copy the text and paste it here for anyone who can understand it.Please, it is very importand for me to work with SQL Server for my project. Any advice or information or anything else???
Thank you all,
HERE IS THE LOG FILE:
"Microsoft SQL Server 2005 Setup beginning at Wed Mar 14 07:45:33 2007
Process ID : 2684
c:c7720b32114815db82783dd06c2d54b9setup.exe Version: 2005.90.3042.0
Running: LoadResourcesAction at: 2007/2/14 7:45:33
Complete: LoadResourcesAction at: 2007/2/14 7:45:33, returned true
Running: ParseBootstrapOptionsAction at: 2007/2/14 7:45:33
Loaded DLL:c:c7720b32114815db82783dd06c2d54b9xmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2007/2/14 7:45:33, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x80070002 (2)
Windows Error Text: Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
02B1CFC0Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text:
Class not registered.
Failed to create CAB file due to datastore exception
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "2684"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 2"
View 4 Replies
View Related
Dec 19, 2007
I have had a heck of a time trying to get SQL Compact Edition 3.5 working in by Visual Studio 2008 environment. I (now) know it comes along with Visual Studio 2008 by default, however, I didn't realize that at first and went and installed one of the SQL Compact Edition MSI's that were available from MS download. Since then I am unable to create a new compact edition database (Add New Item...) in visual studio it says:
The data provider required to connect to the local data file could not be found. The file will be added to the project but the typed DataSet associated with the file will not be generated.
Also, When I try to create a new connection under server explorer, I notice the SQL Compact Edition is not a data source option.
I am running the relased build from the MSDN download iso: en_visual_studio_team_system_2008_development_x86_x64wow_dvd_X14-26382.iso
I have uninstalled the seperate install of the SQL Compact Edition and run repair on the visual studio 2008 installer and it does not fix the problem. I have seen a reference that says the design time installer should be under Program FilesMicrosoft Visual Studio 9.0Common7IDE, but it isn't in my install. I did find it on the source DVD under the folder WCUSSCESSCEDeviceRuntime-enu.msi.
After running that, I no longer get the original error message. Now I get a little further and then the Data Source Configuration Wizard comes up and says
An error occured while retrieving the information from the database:
SQL Server Compact is either not installed or the installation has been corrupted.
OK, so I look under C:Program FilesMicrosoft SQL Server Compact Editionv3.5 which install from the DVD (WCUSSCESSCEDeviceRuntime-enu.msi.) created and notice a readme file that inside has a link for downloading and installing the Runtime for Desktop computers.
Thinking that perhaps the runtime is a seperate install from the design tools I follow the link and setup starts. At this point I notice that the set says Compact Edition 3.5 BETA - hmm that doesn't seem right so I cancel. Not sure why the final product for the design tools would have a readme that points to a download link for the BETA of the runtime, but going back to the DVD I see the file WCUSSCESSCERuntime-enu.msi and run it. This time it says it will install Compact Edition 3.5 - looks good no BETA.
Finish the instal and viola! it works....
So what worked for me in the end:
1) Uninstall any other installs of Compact Edition 3.5 you might have
2) repair visual studio
3) install the design tools from the DVD WCUSSCESSCEDeviceRuntime-enu.msi.
4) install the runtime fgrom the DVD WCUSSCESSCEDeviceRuntime-enu.msi.
View 2 Replies
View Related
Feb 14, 2007
Hi
I have installed SQL Server Express 2005 on my machine.
I want to install SQL Server Standard Edition 2005 on my machine to check new services it has.
Can these 2 Editions coexist with each other, or any troubles you think might encounter?
Thanks
View 5 Replies
View Related
Jan 5, 2006
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
View 12 Replies
View Related
Jan 22, 2008
Hi
-I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine.
Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM.
I want to use partition function with the enterprise edition, will the trial version of sql server work for me?
-If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database?
- Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
Thanks
View 9 Replies
View Related
Apr 26, 2006
I'm not familiar with SQL Server and am just starting things up. I have VB Express and SQL Server Express (I think - at this point, I wouldn't be surprised if I didn't), and am trying to create a database.
So how do I do that?
All I see that relates to the SQL Server 2005 is under All Programs -> Microsoft SQL Server 2005 -> Configuration Tools; I have a configuration manager, Error and Usage Reporting, and Surface Area Configuration. I assumed that in there would be a database engine in here somewhere, but I have rumaged through every command in these and found nothing on creating a new database. Nada.
Am I looking in the wrong places, did something go wrong with my install, or am I just a complete leptic?
Please Help!
View 1 Replies
View Related
Jul 10, 2006
Hi,
I am trying to install sql server express with advanced services and I can't get any further than this message:
Name: Microsoft SQL Server 2005 (SQLEXPRESS)Allowed Action: Maintain (Action is only available from Add or Remove Programs)Reason: Cannot maintain product, to maintain the product go to Add or Remove Programs
Name: Microsoft SQL Server 2005 ToolsReason: Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Edition check:Your upgrade is blocked because of edition upgrade rules. For more information about edition upgrades, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.I have looked ay the book sonline and it got me nowhere very quickly!
Any ideas reatly appreciated! I have no other SQL products installed or express versions etc. I have VS 2005 and I want to install that next!
Thanks!
View 1 Replies
View Related
Jul 13, 2005
Well, I'm to the point of giving up. If there was a 1-800 # that charged $400 /minute for support at this point I would pay it! I have been developing an ASP.net 2.0 web application that basically has login security. I have been struggling to get this thing to work. On my local machine it works fine, but when I copy the code (including the ASPNETDB.mdf that is in the APP_Data directory) over to a web server, I get to the login screen but when I attempt to login I get an error. I've tried using the SSEUTIL.exe and was unsuccessful. At this point I don't even know where to start. Can someone please help me??? The error is listed below:
Server Error in '/' Application.
Unable to open the physical file "C:InetpubWIWebApp_Dataaspnetdb.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".Unable to open the physical file "C:InetpubWIWebApp_Dataaspnetdb_log.ldf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.File activation failure. The physical file name "C:InetpubWIWebApp_Dataaspnetdb_log.ldf" may be incorrect.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Unable to open the physical file "C:InetpubWIWebApp_Dataaspnetdb.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".Unable to open the physical file "C:InetpubWIWebApp_Dataaspnetdb_log.ldf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.File activation failure. The physical file name "C:InetpubWIWebApp_Dataaspnetdb_log.ldf" may be incorrect.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Unable to open the physical file "C:InetpubWIWebApp_Dataaspnetdb.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".
Unable to open the physical file "C:InetpubWIWebApp_Dataaspnetdb_log.ldf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".
Cannot open user default database. Login failed.
Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
File activation failure. The physical file name "C:InetpubWIWebApp_Dataaspnetdb_log.ldf" may be incorrect.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +684835
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +207
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1751
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +32
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +601
System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +159
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +346
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +445
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +304
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +126
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +239
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved) +815
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +80
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +78
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +161
System.Web.UI.WebControls.Login.AttemptLogin() +94
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +101
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +134
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5670
Version Information: Microsoft .NET Framework Version:2.0.50215.44; ASP.NET Version:2.0.50215.44
View 11 Replies
View Related
Sep 30, 2007
I need to install SQL Server 2005 Standard Edition on a new Windows Server 2003 machine that has SQL Server 2005 Express Edition installed by a backup application (Backup Exec). Will I need to uninstall the express edition in order to install the standard edition? Can the two coexist as separate instances or will the standard edition installation simply upgrade the express installation?
Thanks
View 3 Replies
View Related
Dec 3, 2007
Hi,
I am looking to using the express edition toolkit for its BI tools but noticed the that it doesn't support a Database engine.
If I am running SQL Express edition, & install the Express toolkit, will this remove the Database engine functionality of the Express edition? Will there be conflicts? Will they run as separate GUI's or is the toolkit added to the Express edition GUI?
Thank you very much for any suggestions anybody might have on this
View 7 Replies
View Related
Dec 1, 2006
Hello..
I've installed Visual Basic 2005 express edition & tried to connect to SQL Server 2005 express edition. I noticed that VB2005 Express Edition doesn't have any OLEDB provider for SQL Server. The only OLEDB Provider is for M.Access. Is this correct? if so, what should i do if i want to connect SQL Server 2005 express edition with VB2005 express edition by using OLEDB connection type?
I really appreciate any respond from you guys.. Thank's and waiting for the good news..
Best regards,
VITRELLE
View 1 Replies
View Related
