MovePrev After MoveToBookmark In OLEDB Consumer Templates Doesn't Work Properly
Mar 3, 2008
Hello,
I tried to use bookmarks in OLEDB consumer templates and I have problems with using MoveToBookmark. This method sets cursor position correctly on bookmarked row, but it seems to me it doesn't set the right cursor position in DB. When I call MovePrev after MoveToBookmark, I will not get previous row of the bookmarked row.
Simplified Example - I get bookmark of the first row, then move to the 3th row. Call MoveToBookmark (current row is no the first row). But when I call MovePrev I'will not get DB_S_ENDOFROWSET but the second row:
MoveFirst()
bk = GetBookmark()
MoveNext()
MoveNext() // Now I'm on third row
MoveToBookmark(bk)
GetData() - Now I get data from 1st row
MovePrev()
GetData() - Now I get data from the second row!!
All calls to OLEDB returs S_OK.
Does somebody now, whats wrong?
Thanks
View 1 Replies
ADVERTISEMENT
Feb 26, 2008
Hello,
I'd like to use OLE DB consumer templates, but I have troubles with changing values in my test DB. I've created a simple MS access DB 'ZK2Test.mdb' with one table 'pokus'. This table consist of one column with number (short integer).
I can read values, thats works fine. But when I try to write something, it is not propagated into DB.
I call SetValue and Update on cTable object and every call returns S_OK. When I try to read value of first row after my write, I get my new value of first column. But after moving cursor somewhere else and back to first row, reading first column of first row returns again the previous value.
In code example is my attempt to change value 1 from first row to 421
Sequence of commands is (C1 means Column 1):
MoveFirst
GetValue(C1) = 1
SetValue(421 to C1)
Update()
GetValue(C1) = 421
MoveNext()
MoveFirst()
GetValue(C1) = 1
Could anybody please tell me, what is wrong?
Thanks for your answers
Code Snippet
CDataSource DTSrc;
CSession DTSession;
CTable<CDynamicAccessor, CRowset> cTable;
// Open DB
res = DTSrc.Open (L"Microsoft.Jet.OLEDB.4.0", "..\ZK2Test.mdb");
CHECK_RES(res);
res = DTSession.Open(DTSrc);
CHECK_RES(res);
CDBPropSet propset(DBPROPSET_ROWSET);
propset.AddProperty(DBPROP_IRowsetUpdate, true);
propset.AddProperty(DBPROP_UPDATABILITY, DBPROPVAL_UP_CHANGE | DBPROPVAL_UP_INSERT | DBPROPVAL_UP_DELETE);
res = cTable.Open(DTSession, L"pokus", &propset);
CHECK_RES(res);
// Move to first row
res = cTable.MoveFirst();
CHECK_RES(res);
dataPtr = cTable.GetValue(1);
x = *((SHORT*)dataPtr);
// Now the value of x is 1
x = 421;
if (!cTable.SetValue(1, x)) {
return FALSE;
}
res = cTable.Update();
CHECK_RES(res);
dataPtr = cTable.GetValue(1);
x = *((SHORT*)dataPtr);
// Now the value of x is 421
// Move cursor to the second row and back
res = cTable.MoveNext();
res = cTable.MoveFirst();
dataPtr = cTable.GetValue(1);
x = *((SHORT*)dataPtr);
// Now the value of x is 1 (the original value, WHY!?)
View 5 Replies
View Related
Apr 3, 2008
hi guyz i am trying to trap the duplicate records . cannot trap the below dupes any idea. i also used ltrim and rtrim it still thinking it is a duplicate but it is not. what is the best way doing it.
select count(*) , muzenbr from muzealbums_1 where muzenbr = '1000082' group by MuzeNbr, PNOTES, CNOTES, CAT3, Performer having count(*) > 1
MuzeNbr nvarchar no 14 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS
PNOTES nvarchar no -1 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS
CNOTES nvarchar no -1 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS
CAT3 nvarchar no -1 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS
Performer nvarchar no 510 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
View 6 Replies
View Related
Jul 23, 2007
Hello,
I'm writing a program which runs SQL express installer
Code Snippet
public bool InstalSQLExpress()
{
//creating new process for setup
Process setupProcess = new Process();
//start information for setup process
ProcessStartInfo startInfo = new ProcessStartInfo();
//filename location
startInfo.FileName = sqlExpressSetupFileLocation;
//commandline arguments ("/qb" - only basic UI during the setup, "/qn" - setup with no UI)
//startInfo.Arguments = BuildCommandLine(); // <- make it work
// startInfo.Arguments = "/qb INSTANCENAME=SQLEXPRESS ADDLOCAL=All SECURITYMODE=SQL" +
// "SQLACCOUNT=konrad SQLPASSWORD=****** " +
// "AGTACCOUNT=konrad AGTPASSWORD=******" +
// "ASACCOUNT=konrad ASPASSWORD=******" +
// "SAPWD=*****";
startInfo.Arguments = BuildCommandLine();
//we're not using system shell to process execution
startInfo.UseShellExecute = false;
//adding start info
setupProcess.StartInfo = startInfo;
setupProcess.EnableRaisingEvents = true;
setupProcess.OutputDataReceived += new DataReceivedEventHandler(setupProcess_OutputDataReceived);
setupProcess.ErrorDataReceived += new DataReceivedEventHandler(setupProcess_ErrorDataReceived);
setupProcess.Exited += new EventHandler(setupProcess_Exited);
//running the process
return (setupProcess.Start());
}
private string BuildCommandLine()
{
string strCommandLine = null;
MessageBox.Show("SQL");
if (this.sqlSecurityMode)
{
strCommandLine = "/qb";
strCommandLine += " INSTANCENAME=SQLEXPRESS";
strCommandLine += " ADDLOCAL=All";
strCommandLine += " SECURITYMODE=SQL";
strCommandLine += " SQLACCOUNT=" + sqlAccount;
strCommandLine += " SQLPASSWORD=" + sqlPassword;
strCommandLine += " AGTACCOUNT=" + sqlAccount;
strCommandLine += " AGTPASSWORD=" + sqlPassword;
strCommandLine += " ASACCOUNT=" + sqlAccount;
strCommandLine += " ASPASSWORD=" + sqlPassword;
strCommandLine += " SAPWD=" + SysadminPassword;
return strCommandLine;
}
else
{
return strCommandLine;
}
}
When I specify command with literal value it works fine but when I try to use function or variable installer prompt error message:
SQL Server Setup could not validate the service accounts. Either the service accounts have not been provided for all of the services being installed, or the specified username or password is incorrect. For each service, specify a valid username, password, and domain, or specify a built-in system account.
I don't know why it's wrong and be gracefull for help
View 2 Replies
View Related
Mar 5, 2008
Hello all,The followinq qurey returns sometimes values of null to some of this columns, byK,byT,byD. the column F wil not contains any nulls, and 0 will be populated in it at any case of .Now, the problem is that when sorting out F the sort will not work when there is null parameters in byK because teh fact that a 0 values is greater then NULL value, and the sort of F will not take in considiration. So I guess the question is how can I sort NULL values and 0 values to be the same weight in the sort by command? SELECT A.gym_id as gym,s_id, week, gym_name, boxer, league, sum(points)
points,sum(byK)as byK, sum(byT) as byT,sum(byPoints) as byPoints ,
sum(byD) as byD, count(C.gym) as F
FROM A inner JOIN B ON A.gym_id = B.gym_id
left JOIN C ON A.gym_id = C.gym
WHERE (B.l_id = ?text
group by A.gym_id
order by points DESC,byK DESC,byT DESC, byPoints DESC, byD DESC,F ASC
View 3 Replies
View Related
Jan 7, 2008
Hello,
I have a question regarding oledb templates in Visual Studio 2005. For some time I was trying to get through but I can't. Can anyone tell me how can I read the properties of the DataSource class being inside Rowset or Command class?
I mean: DataSource class is creating Session class. Session is creating Rowset or Command and so on.. But how can I read the INIT_DATASOURCE property of the DataSource class while for example a Command is called?
Could you give me a sample of code which retrieves the INIT_DATASOURCE property in the Execute method of the
CRowsetImpl class?
class ColedbRowset :
public CRowsetImpl< ColedbRowset, ColedbWindowsFile, ColedbCommand>
{
public:
HRESULT Execute(DBPARAMS * params/*pParams*/, LONG* pcRowsAffected)
{
????
}
}
View 3 Replies
View Related
Jun 19, 2001
I define one of my columns as FLOAT. Some of the values are negative and positive with precision 8 or 12. When I run updates against that column and then check the data all values are 0.
Any idea why?? I appreciate it.
Thanks,
David
View 1 Replies
View Related
Sep 14, 2005
Please help someone from MSFT!
View 78 Replies
View Related
Sep 26, 2007
I have an XML file that my XML Source component is accessing. I have noticed that is possible to set a column in the external metadata collection to a certain datatype and the matching output column to a different datatype and this doesn't not generate a warning like it does with other source components (e.g. Flat File Source Adapter).
Try it. Set a column in your external metadata to have a datatype of DT_WSTR. Set the matching output column to DT_UI8. You will NOT get a validation error. I think you should.
This behaviour was noticed on RTM (i.e. no service pack installed) by the way.
I think this is a bug. Anyone agree?
-Jamie
View 10 Replies
View Related
Jul 17, 2007
Hi,
I've my SSIS Packages, having multiple Configuration stored in SQL Server Table named [SSIS Configurations].
And it's devloped on BHUDEV Server ON Devlopmentdb Database. So durring development Default Cofigurations are set for BHUDEV Server.
Problem is that when I install my Package on SQL Server on different Server for example JOHN, and now my database is ProductionDB and [SSIS Configurations] table will be on ProductionDB database. And I've made required changes in [SSIS Configurations] table. So when I run the Package even then it picks configuration information from BHUDEV.Developmentdb.dbo.[SSIS Configurations] table. That's my problem.
But If when during execution time, I change the connection information then it works fine.
Please Help!
Bhudev
View 6 Replies
View Related
Jan 11, 2004
Howdy,
Is SQL 2000 clustering on windows 2000 any good ??
We are looking at spending *quite* a bit of money to implement it, but I need opinions of what its like from the people that actually use it & look after it.
e.g.
DOES IT WORK LIKE IT SHOULD????????
Is it reliable?
Is it resource hungry?
Are there lots of bugs?
All repsonses very welcome. No response too small.
Thanks for your help.
Cheers,
SG.
View 6 Replies
View Related
Mar 10, 2008
Does sseutil work properly on vista? I need a way to programmatically detach a user instance on Vista.
The following launches and runs ok on XP.
Doesn't run on Vista? Is there some problem with Process on Vista? sseutil runs ok from the command line in Vista.
public void DetachDatabase(string filePath)
{
ProcessStartInfo startInfo = new ProcessStartInfo("SSEUtil.exe");
startInfo.WindowStyle = ProcessWindowStyle.Normal; //.Hidden;
startInfo.Arguments = "-d "" + filePath + """;
Process detachProcess = Process.Start(startInfo);
while(!detachProcess.HasExited)
{
Thread.Sleep(1000);
}
}
View 5 Replies
View Related
Aug 29, 2007
Hi
I am writing a application using the ODBC Calls to connect to MSSQL Database 2005 SP2.
I am using the Microsoft Visual Studio 6.0 for compilation
I have defined the UNICODE macro in the project settings.
Now when i am trying to connect to MSSQL Database using this call below
retcode = SQLConnect(dbc, (SQLTCHAR*) dsn, SQL_NTS,
(SQLTCHAR*) loginname, SQL_NTS,
(SQLTCHAR*) password, SQL_NTS);
I give a wrong username .
Then i use the function
SQLGetDiagRec to collect the error
void extract_error(char *fn,SQLHANDLE handle, SQLSMALLINT type)
{
SQLINTEGER i = 0;
SQLINTEGER native;
SQLTCHAR state[ 100 ] ;
SQLTCHAR text[256];
SQLSMALLINT len;
SQLRETURN ret;
memset(state,0,sizeof(state));
memset(text,0,sizeof(text));
fprintf(stderr,
""
"The driver reported the following diagnostics whilst running "
"%s",
fn);
do
{
ret = SQLGetDiagRec(type,
handle,
++i,
state,
&native,
text,
sizeof(text),
&len );
if (SQL_SUCCEEDED(ret))
_stprintf(_T("%s:%ld:%ld:%s"), (const TCHAR *)state, i, native, text);
_stprintf(_T("Error code %s "),(const TCHAR *)state);
}
while( ret == SQL_SUCCESS );
}
Now if i check the values of "state" and "native" i get it as 0.
If i use non unicode (i.e. remove the UNICODE macro) it works fine.
Best Regards
Manoj
View 1 Replies
View Related
Nov 27, 2006
I try to go to a command prompt to get this to run right with no luck. Is there something that I am not doing right? It gives me the help library, but thats about it. Also, I have dealt with Oracle in the past. And was wondering is there a way to access the SQLCMD utility on a workstation with a login of some kind?
--David
View 1 Replies
View Related
Dec 13, 2006
Greetings,
I have an expression in a precedence constraint that is returning false when it should return true. This is the expression that returns false:
((5500 / 9990) * 100) > 10
The following expression returns true. I did the division (5500 / 9990) myself and substituted the resulting value:
((0.55055055055055055055055055055055) * 100) > 10
Why is the first expression returning false? I'm stuck in the mud up to my axles on this and I know I'll probably feel like a fool when I learn the answer...
Thanks,
BCB
View 3 Replies
View Related
Jul 28, 2007
Hi Friends
"I wonder why the boolean values Set to "Disable Property" using expressions does not work as expected (though Precedence constraints work fine). I find no way to disable individual task. "
I have a boolen variable V, (False) enabled by default at design time for a task T, I disable T based on a condition (if A ! = 'a') during runtime.
Now first time when I run the Package, Task gets disabled (works fine on the condition given). However T gets permanently disabled even after we stop debug mode, which is not the expected behavior. Further on when you run, it wont work at all.
Is it true that a task disabled at design time cannot be enabled during runtime via expressions ?
If things are working fine in your case, pls let me know what settings are required.
Thanks
Subhash Subramanyam
View 5 Replies
View Related
Sep 15, 2005
I'm pretty new to DTS, so forgive me if this is basic. I created a simple DTS package to run a query and export it to a text file. I can execute the package fine from my workstation through EM, but when I try to execute the job to run the package I get this error:
Error = -2147467259 (80004005) Error string: Error opening datafile: Access is denied.
I think that maybe SQL Agent doesn't have the right permissions to write to that network drive. What should the permissions be?
View 3 Replies
View Related
Nov 10, 2004
This is probably very simple, but I can't get passed this problem.
I have a report in MS Access that uses info generated by a query. One of the text fields in the query contains either the word 'Select' or the name of a course.
The report should display a space if the value is 'Select', or the actual value of the field in any other case. The field can never contain a null value.
I've used:
=IIf([optVoc1]="Select","",[optVoc1])
in the text box on the report, but this only returns #error regardless of the actual content of the field.
What am I doing wrong?
Regards,
BD
View 5 Replies
View Related
Aug 27, 2004
Hi all,
I create and schedule a SQL job to run every minute to update a table base on certain condition but it doesn't work. Job history says successful every time but the table doesn't get updated.
However if I move it to Query Analyzer and run it under dba, it will work. Thinking that it may have to do with the user the job run as, I then change run as user from self to dba. But still SQL job won't update my table.
Anything about user permission or security that I can check? Or it there any other possibility?
TIA
View 1 Replies
View Related
Apr 26, 2007
When I run the select its fine but I cannot delete..... i have done this many times and it has worked.... I cannot see the error what am i missing
select
eqnow.empnumber,
eqnow_names.empnumber,
eqnow_names.names
--delete
from
eqnow
inner join eqnow_names
on eqnow.empnumber = eqnow_names.empnumber
where
eqnow_names.names is null
i get this error
Server: Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'inner'.
View 3 Replies
View Related
Oct 21, 2007
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 78
The configuration option 'user instances enabled' does not exist, or it may be an advanced option.
Valid configuration options are
View 1 Replies
View Related
Apr 19, 2008
Hi to all, I'm building (and learn) an application with VB Express. In "edit dataset with designer" I've build this sql query:
SELECT tbl_soggetto.[ID Soggetto], tbl_soggetto_tipo.Tipo, tbl_soggetto.[Cognome/Denominazione], tbl_soggetto.Nome, tbl_soggetto.Indirizzo, tbl_soggetto.CAP, tbl_soggetto.Città , tbl_soggetto.Provincia, tbl_soggetto.[Telefono 1], tbl_soggetto.[Telefono 2], tbl_soggetto.[Telefono 3], tbl_soggetto.[Telefono 4], tbl_soggetto.[eM@il 1], tbl_soggetto.[eM@il 2], tbl_soggetto.Note
FROM tbl_soggetto INNER JOIN tbl_soggetto_tipo ON tbl_soggetto.[ID Tipo] = tbl_soggetto_tipo.[ID Tipo]
WHERE (tbl_soggetto.[Cognome/Denominazione] LIKE '%' + @Testo + '%')
The LIKE doesn't work!
I call the query with Me.griglia.DataSource = Me.TA_tbl_soggetto_ricerca.Search_Cognome(Me.txt_trova.Text.Trim)
But with LIKE '%ABC%' work!
Me.griglia.DataSource = Me.TA_tbl_soggetto_ricerca.Search_Cognome()
Someone can help me? Thanks...
View 12 Replies
View Related
Dec 11, 2006
When I try to install the problem I get the following error.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The log tells me nothing useful. I can't start the thing manually because after clicking cancel on the error message, the installer proceeds to roll back the installation.
How do I fix this problem?
View 3 Replies
View Related
Jun 8, 2005
This is the autogenerated code from the SelectCommand of my DataAdapter, except the red text. This DataAdapter is used to fill a DataGrid. What I want to do, is to calculate the total memory (4 slots) / PC.This code makes the sum of all memory of all PC's together.I'm not sure if the group by clause is needed here ...Me.OleDbSelectCommand1.CommandText = "SELECT PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type AS Case_Type, Processor_T" & _"ype.Type AS Processor_Type, Processor_Snelheid.Snelheid AS Processor_Snelheid, " & _"(SELECT SUM(Memory) FROM Memory, PC, RAM WHERE RAM.PcID = PC.ID AND RAM.GrootteID = Memory.ID)" & _"AS Memory, OS.Naam AS OS, OS_SP.Nummer AS OS_SP, Gebru" & _"iker.Naam AS Gebruiker_Naam, Status.Status, PC.Tagged FROM (Status RIGHT OUTER J" & _"OIN ((((((((PC LEFT OUTER JOIN (RAM LEFT OUTER JOIN Geheugen ON RAM.GrootteID = " & _"Geheugen.ID) ON PC.ID = RAM.PcID) LEFT OUTER JOIN Case_Type ON PC.Case_TypeID = " & _"Case_Type.ID) LEFT OUTER JOIN OS_SP ON PC.OS_SpID = OS_SP.ID) LEFT OUTER JOIN Ge" & _"bruiker ON PC.GebruikersID = Gebruiker.ID) LEFT OUTER JOIN Processor_Snelheid ON" & _" PC.Processor_SnelheidID = Processor_Snelheid.ID) LEFT OUTER JOIN Processor_Type" & _" ON PC.Processor_TypeID = Processor_Type.ID) LEFT OUTER JOIN OS ON PC.OsID = OS." & _"ID) LEFT OUTER JOIN Switchbox_Details ON PC.ID = Switchbox_Details.PcID) ON Stat" & _"us.ID = PC.StatusID) GROUP BY PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type, " & _"Processor_Type.Type, Processor_Snelheid.Snelheid, OS.Naam, OS_" & _"SP.Nummer, Gebruiker.Naam, Status.Status, PC.Tagged"I would like to know how to calculate the total memory for each separate PC.Hope you can help me.
View 5 Replies
View Related
Sep 20, 2000
I had a SQL Server falure. I rebiuld Master and tried to attach my database
with sp_attach_db? but get an error
Location: pageref.cpp:3931
Expression: rowLog.RowCount () == 1 || pPage->IsEmpty ()
SPID: 10
Process ID: 119
Connection Broken
View 1 Replies
View Related
Mar 1, 2001
I try to copy a DB from one server to another. On the target server an older version of the DB has been deleted and I now try to attach the new version using "sp_attach_db DBname, Filelocation", but I always get an error "Device Activation error. The physical file name 'D:mssql7dataAgency_log.ldf' may be incorrect"
"Database 'Agency' cannot be Created"
To me it seems that the database is looking for the log files (now deleted).
I've tried forcing a new log file I created using the same locations for the mdfs. I've tried using create a new database and replace the mdf file, but nothing works.
View 3 Replies
View Related
Mar 31, 2003
Hi,
I wanted to create a new trigger, but Enterprise Manager tells me about an "Incorrect syntax near @UpdatedByID, line 28". I double-checked everything, but it still does not work :mad: .
Any hints :confused: ?
TIA,
-Gernot
Here is the statement (line 28 is marked with ***):
CREATE TRIGGER TransferToABII ON [dbo].[CALGeneral]
FOR INSERT
AS
BEGIN TRANSACTION
BEGIN
DECLARE @Event varchar(255),
@BBaseUID int,
@StartDate smalldatetime,
@EndDate smalldatetime,
@Details varchar(255),
@AddressID int,
@ProjectID int,
@UpdatedByID int,
@ActID int,
@EventID int
SELECT @Event = Event,
@BBaseUID = BBaseUID,
@StartDate = StartDate,
@EndDate = EndDate,
@Details = Details,
@AddressID = AddressID,
@UpdatedByID = UpdatedBy,
@ProjectID = ProjectID
FROM INSERTED
BEGIN
EXEC BrainBase.dbo.BB_NEW_CREATE_NoteTask_Ret *** (@UpdatedByID,
@AddressID,
@ProjectID,
@BBaseUID,
@StartDate,
GetDate(),
@Event,
NULL,
NULL,
NULL,
NULL,
@Details text,
@ActID = @ActID OUTPUT,
@EventID = @EventID OUTPUT)
END
BEGIN
UPDATE CALGeneral SET ActID = @ActID WHERE ID = INSERTED.ID
END
END
IF @@ERROR <> 0
BEGIN
RAISERROR('Error occured',16,1)
ROLLBACK TRANSACTION
END
COMMIT TRANSACTION
View 4 Replies
View Related
Nov 11, 1999
I'm working with mssql 6.5
I have an primary key column with Identity property.
And at the moment server doesn't insert the proper value to this column.
Error message is following
Msg 2601, Level 14, State 3
Attempt to insert duplicate key row in object 'Spot' with unique index 'XPKSpot'
Command has been aborted.
The datatype of this column is int, and number of rows ~17000.
If I execute select @@identity it returns null.
View 4 Replies
View Related
Aug 2, 2004
I'm combining first name, last name, middle name, and an ID number together into an alias. Then I need to match that alias with a variable passed to the page (its a search results page). The problem is it claims that there is no table with the name of my alias. Anyone know what I'm doing wrong?
A mockup of the SQL looks like this:
SELECT UserID, Last_Name + ', ' + First_Name + ' ' + Middle_Name + '.' AS name
FROM Table
WHERE name LIKE 'variable%'
Everything looks right with the results, if I take out the WHERE clause it has name displayed properly and joined together with the rest of the data in the results properly.
Thanks in advance for any help that can be provided!
View 3 Replies
View Related
Oct 12, 2007
I have a query that doesn't work when i use 4 name convention instead of a openquery. The msg is below. Anyone know what is going on?
Both queries are the same but one doesn't work.
-- works
SELECT TOP 1 * FROM OPENQUERY(AS400_PROD, 'SELECT * FROM PPTREASUSA.ORDDET')
-- doesnt work
SELECT TOP 1 * FROM AS400_PROD.S1030Y3M.PPTREASUSA.ORDDET
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error.
[OLE/DB provider returned message: Unspecified error]
[OLE/DB provider returned message: [IBM][iSeries Access ODBC Driver][DB2 UDB]CPF5715 - File ORDDET01 in library QTEMP not found.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBSchemaRowset::GetRowset returned 0x80004005: ].
http://www.sqlserverstudy.com
View 2 Replies
View Related
Jan 17, 2008
hi all,
i made a stored procedure that uses the sp_send_dbmail to send mails. SQL server dislays the message "mail queued" but nothing is recieved
here is the code of the stored procedure i made
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Exams',
@recipients = 'me@domain.com',
@Body_format = 'HTML' ,
@subject = 'Room Preparation' ,
@body='hi there';
so can anyone help with this issue
thanks in advance
View 6 Replies
View Related
Feb 7, 2007
I have a drill through that passes four parameters. Three are passed from the current selections in that reports parameters and the fourth needs to be the customer name they click on in the body of the report so it's passed as Fields!fieldname.Value. When I click on the customer name, the drillthough fires but the report simply doesn't load. If I remove the parameter from the field clicked on and just pass the three parameters, it goes to the drill through correctly and that fourth parameter just sets to the default for that parameter in that report.
I can then simply check that parameter and select the value from the list that is exactly the same as the value I was attempting to pass it in the drill through and report refreshes correctly.
Whatever it is, is something in the manner that the value is passed in the drill through specifically.
Any ideas?
View 1 Replies
View Related
Mar 15, 2007
Hello,
I've rescued a MDF and LDF files off a client's old server, and I wanted to attach it to our own, but I can't seem to get the command to work, basically I have these two files, which I've dropped on our server:
C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.MDF
C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.LDF
So when I do a
SP_ATTACH_SINGLE_FILE_DB 'somedb','C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.MDF'
It says the LDF path my be incorrect, and that there's two other files that are missing:
MYCLIENTNAME_LOG (no extension)
extra_log (no extension)
I thought the whole point of the command is that you only need a single file?
Its very hard to go back to the client's old server and try to find these two files, and it doesn't really matter if we loose a bit of data, so long as the bulk of it is available.
Update: I think I've found the answer...its not possible to do this, it really needs all the log files.
Any workarounds?
View 1 Replies
View Related
