I have a development server setup with Report Builder that our users have been testing out. They have a number of reports that they have created on this dev server.
We now have our live environment all setup and I'd like to move their Report Builder reports to the new server for them so they don't have to recreate them.
Is this possible? If so, how?
Thanks.
Here is one scenario. There is Department X which has subdepartments A,B,C,D. A has 5 members and B has some 7 products, C 5 members and D has some 12 members. My problem is I need create a Report model where is if we select X
all the list of subdepartments and their members should be displayed. I.e if we select X then
A
1
2
3
4
5
B
1
2
3
4
5
C and so on..........every thing should be displayed that are under department, i.e subdepartments under that department and the members under each subdepartment of that Department.
The problem here is all those departments and subdepartments are in same table which has columns like,
"DeptId" and "Dept Reporting to" and "EmplID.
When we select "Dept Reporting to" = X, we need to get the result as I specified above
Can anyone please help me out to create a Report Model to generate ad hoc reports
Hi!
We have a "folder hiriarchy" in reporting services with permission for different users to only create reports in their own folder. However, it would be nice if they (in report builder) could open eachothers reports, modify them and then save them in theri own folder. In this case, if they find a useful report that someone else has created, they could just make their own small modifications and save it in their own folder.
The problem is that I cant't seem to find a securitysetting that allow this. Either they can create/modify/delete the reports in a "folder" or they can't even open them in report builder...
Is there a solution to my problem?
regards Andreas
Hello -
I know that you can build a Report Designer report and add URL navigation from a field. I am trying to figure out how to do this with report BUILDER. I haven't been able to do it using the UI and editing the RDL directly to match what I see in a similar report Designer report is being ignored (if I did it right).
I can put the URL into the DSV & Model as a field/attribute, but displaying the a field with a URL in it doesn't make it "clickable".
Does anyone have a trick for this? Or know that there is definately no way to do it?
Thanks in advance,
Toni Fielder
Some textbox are great moving, and need to when the box above gets extra data.. but how do a stop one from moving? make it stay right where I put it.
A stays where it is... for some reason. but B doesnt? it moves down according the textboxes to the left (where is says phone) ...
I have a very simple report model with two tables in it but having millions of rows.
I have developed a report on this report model, which will return atleast half million rows.
I have published this report to report server and trying to access the report through the report manager. It never returns the result. Fails with tme out expired error. I have 64 bit machine and 2 GB RAM. The report is expected to return atleast 500 MB data. As per the SSRS documentation it the memory should be three times to process the report. It does not work.
If I develop the same report using the report designer, I get the results returnd within a minute.
If I use the above mentioned Report Model as my data source, again I get the results within less than minute.
So what is it the report builder report is doing additional? It is strange that the same report model when used as data source returns the same number of rows within less than minute and the report developed and uploaded to report manager using report builder fails with time out expired error?
What is that the Report builder doing internally? Can I change some configuration for report builder report to work for large reports? I have already changed the memory settings in the report config and machine config files.
Your early response is appreciated.
Virendra
Hi.
I get a problem when I want to preview a report in Report Builder. I just launch Report Builder by the url [1] (RS is on a server, and I work on a laptop). Then I choose a model and create a simple report. When I press "Run Report", I get an error message saying: "The permissions granted to user 'mydomainmyusername' are insufficient for performing this operation. (rsAccessDenied)". But my user are assigned to content manager...
If I then save the report to the Report Server, I can access the report through e.g. the Report Manager without any problems.
Why doesn't the preview functionality work for me? Are there some settings I need to set, or is it a bug in Report Builder?
Regards, Tomsi
[1] http://<servername>/reportserver/reportbuilder/reportbuilderlocalintranet.application
Is it possible to create cascading parameters with in Report Builder? I have done this with Report Designer but i need a solution with Report Builder.
(I need the structure: First the user selects the state, afer the postpack the cirties of the state are listed in another dropdownlist for selection).
Thanks in advance
Hi,
I need to create letter type reports using the report builder, is this possible?. I am trying to create a letter that embeds some variable fields, i.e,. name, address, contact number. I can't seem to find a way to create page headers, and embed report data fields within text. Is this not possible within the report builder? it seems that the only thing you can do within the report builder is add fields to their predesignated areas. I am being forced to use the report builder instead of the report designer in order to give the end user the ability to make modifications to the report/letter. This is very frustrating. not being able to allow the user to edit report designer files, and then having force them to use report builder which doesn't seem to support some simple features..
Any suggestions would be appreciated...
When we move reports from one folder to another in Report Manager we have to delete the report in the destination folder first before moving it over if a version is already there. If not we get the error that an item with that name already exists. Is there a way around this? Is there a setting which will allow over-write of a report?
View 1 Replies View RelatedI have created some reports using Report Builder however they autorun with default values when selected in report manager, cant think many people would want this to happen. Is there a way of getting rid of the default values in RB or preventing auto execute in RM?
View 1 Replies View RelatedHello - I am having difficulty enabling the automatic click-through functionality for my model. I have two entities - Customer & Incident. Incident is a role/FK/OptionalMany relationship to customer.
I've read through earlier postings on this subject (below) and have verified that the #Incidents attribute in my incident entity has the EnableDrillThrough=true.
My test report is simple - Customer Name (from customer) and #Incidents (from incident). When I run it, the click-through option is not available (the cursor stays as an arrow and doesn't change to a finger).
Are there other properties or settings that I need to be working with? I have SP2 (9.0.3042) installed on our Standard edition of SQL 2005. I know Infinite Click-Through is not in Std edition, but a few levels should be, correct?
Thanks in Advance,
Toni
Other related postings -
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1260819&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=657279&SiteID=1
I am using Report Builder 3.0 and i have report which has a drill down group. The report opens in a collapsed form.This report has interactive sorting on a column. But,when we drill down and sort the column, the group collapses and the details disappear.
In some posts, i have seen that instead of interactive sorting, people recommended a parameter. But i have to do interactive sorting only.
Hi all,
I'm trying to get empty cells from an OLAP cube to display in a report designed using the Report Builder. Of the three report types, only the Table report shows the empty cells. Is there any option/setting that I need to enable to get this to work for the Matrix or Chart reports? Something like the "Show Empty Cells" option that is available in the pivot table used by BI Dev Studio?
Any help appreciated.
Hi
Does any body know that creating free form rports using Report Builder is possible?
Free-form report - in the sense - that user should be able to drag the fields from the leftside fields pane and drop on body as we do in report designer using BI studio.
I could not figure out a way to do so. Is this a limitation?
Thanks
Raj Yennam
I run these stored procedure to build the report and I am able successfully to build the report but I need some prompts to in the report to get the specific data .
ALTER
PROCEDURE [dbo].[Sharepoint_Ticket_Report]
@StartDate
DATETIME,
@EndDate
[Code] ....
And for prompts how to create created_by and message_type dropdowns as shown in picture.
Hi,
When i select datasource in Report Builder, i am able to see all the available DataSources.
Eg: I have selected one datasource from the list and which has 3 tables(table1, table2, table3) associated to that datasource.
when i drag and drop table1 fields to report, i am not able to see the other 2 tables(table2 & table3)
Is there any property or relationship do i need to maintain?
Thanks,
SR.
I've created a linked server with a pretty basic Excel spreadsheet, and used this command to create a linked server to it:
sp_addlinkedserver ''XL_SPS_1', 'Excel', 'Microsoft.Jet.OLEDB.4.0', 'c:MyExcel.xls', null, 'Excel 8.0'
I want to use this as the data from which to build a report model. As linked servers don't show up in the Data Source View wizard, I created a view in SQL Server:
create view MyExcel
as
select * from XL_SPS_1...Sheet1$
Okay, great, now the view shows up in the DSV wizard and I can create the data source view. However, when I create a new report model based on this data source view, the Report Model Wizard tells me at "Create entities for all tables" that I've got an error when it processes dbo_MyExcel that "Table does not have a primary key."
I assume this is where the identifying attributes for the entities in the report model are taken from, so I really can't go further. Does anyone have an idea as to how to add a primary key to a linked server (Excel) in SQL 2005? Can this be done? Other than importing spreadsheet data to a SQL table, how can I get around this?
Thanks,
--Stan
We have a remote business client who has a proxy server setup and this translates into receiving a 407 proxy authentication blocking error when attempting to download the report builder application for deployment off the report server which is housed locally with us. The proxy server does not allow them to download application type files off another site. At the moment, they would not like to disable the proxy for these users to allow them to deploy the application on their client or add the report server as a trusted site. Is there a method by which Report Builder can be locally installed on the client pc instead of online only with it knowing the correct report server to access and then still launch correctly when the report builder button is pressed through report manager?
I am not a web application guru by any means and we have tried to replicate the oneclick deployment and what occurs in the local settings/apps/2.0 subdirectories, but the application still attempts to download/install again. If we attempt to just launch the local executable on the client, report builder assumes the client pc (localhost) is the report server to access. Is there a method which will succeed?
I have provided required permissions, still user not able to view report builder option in his console.
what could be wrong? what needs to be done to provide report builder to users.
Deleep P
I have client machine in one domain, say A domain , on which I have installed .net 2.0 without any problem. I have report server running in other domain (B domain) where I have deployed few models which will be used from domain A to create ad hoc reports by launching Report Builder. I can access other reports in domain B from A
But when I click on Report Builder ..it tries to connect to server in domain B but fails to connect and shows following log in a text pop up
I know, problem is because of cross domain communication but question is then how to fix it ? what changes I need to do for that in firewall, domain etc etc settings?
Here is the error, I have highlighted lines which might give some clue:
------------------------------------------------------------------------------------------
PLATFORM VERSION INFO
Windows : 5.2.3790.65536 (Win32NT)
Common Language Runtime : 2.0.50727.42
System.Deployment.dll : 2.0.50727.42 (RTM.050727-4200)
mscorwks.dll : 2.0.50727.42 (RTM.050727-4200)
dfdll.dll : 2.0.50727.42 (RTM.050727-4200)
dfshim.dll : 2.0.50727.42 (RTM.050727-4200)
SOURCES
Deployment url : http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application resulted in exception. Following failure messages were detected:
+ Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed.
+ The remote server returned an error: (500) Internal Server Error.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [12/19/2006 6:49:58 AM] : Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [12/19/2006 6:50:14 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
- Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Net.WebException
- The remote server returned an error: (500) Internal Server Error.
- Source: System
- Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
Hi -
I got through the installation hoops for SQLEXPRESS Reporting Services in Vista and set up the default configurations in Report Services Configuration. I can explore the default directory for "Reports" in IIS7, but I can't browse in IE. I get the "The report server is not responding. verify that the report server..." message in the browser. This is after I migrated the app per the initial http 500 error using the preferred method - %systemroot%system32inetservAPPCMD.exe migrate config "Default Web Site/Reports".
I'm running Vista Ultimate, VS2005, SQLEXPRESS SP2. I've tried running IE as admin and also I've disabled UAC from gpedit.msc - ...Windows SettingsSecurity SettingsLocal PolicySecurity Options and unchecking UAC.
Thanks,
Mike
Hi All!!
Can any body help me out in how to build reports using SQL SERVER 2005.
I will be very thankfull for that
Thanks
Biresh Singh
I am able to start Report Builder from the Reports site.
Report Builder opens but then it asks to "Select site or server", I don't see any data sources or anything, I can only enter a site or server. I tried http://crossdatabase/Reports and http://crossdatabase/ReportServer and http://crossdatabase nothing works. What's more, when I cancel and then click on the open button I get an exception:
Code Snippet
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.ReportBuilder.CatalogItemDialog.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
ReportBuilder
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/Documents%20and%20Settings/Administrator.VDBRANDE/Local%20Settings/Apps/2.0/97YHGD67.7XE/97YX7M5J.5E2/repo..tion_c3bce3770c238a49_0009.0000_827b297b08a11874/ReportBuilder.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Deployment
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Deployment/2.0.0.0__b03f5f7f11d50a3a/System.Deployment.dll
----------------------------------------
System.Web
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------
System.Web.Services
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
yicgob7u
Assembly Version: 9.0.242.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
g5yh0wut
Assembly Version: 9.0.242.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
a0wegfwe
Assembly Version: 9.0.242.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I run the Report Builder on the server so there should be no connection problems.
Thanks for any tips.
Hi,
I have my client in one domain and RS running server in another, both r connected through VPN. Now if I try to launch report builder on client machine by clicking link in browser (clickonce)...it tries to connect to server but fails and shows some error, saying 'Internal Server Error (500)', complete error is here :
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1034868&SiteID=1
I can access models on server from other machines in the same domain succesfully..but not from this client domain.
How can we make report builder connect to server acros VPN ?
Thanks,
prashant
According to this article ( http://msdn2.microsoft.com/en-us/library/ms345245.aspx ), a report "/My Reports/AdventureReport1" can be opend using a URL like following:
http://<ServerName>/reportserver/ReportBuilder/ReportBuilder.application?/My+Reports/AdventureReport1
This works correctly in SQL SERVER SP1.
In SP2, Report Builder is still able to open the specified report. However, when you try to click €œSave As€? for the opened report in Report Builder, Report Builder will always give you a dialog without any folders, and you have no way to type in anything in the textbox/dropdown in the dialog.
Any suggestion is appreciated.
Thanks,
Roger
We implemented Custom authentication with reporting services, everything works fine. At our client's site from one of there computer we did the following :
1- open internet explorer and access http://myserver.com/reportserver/reportbuilder/reportbuilder.application
2- the Report Builder Click once application was successfully downloaded onto the clients computer.
3- client was prompted to enter username and password. Client was able to see the report model and create,save reports to the reportserver.
4- close the report builder and try to access report via http://myserver.com/reportserver/reportbuilder/reportbuilder.application, this time the report builder launches but there is no prompt for username and password, instead it's asking to select a reportserver.
5 - tried selecting http://myserver.com/reportserver, there is not popup to enter username and password and we get the error message "unable to connect to server at http://myserver.com/reportserver , enter a different URL and Try again.
.NET framework 2.0 is installed on the client's machine. Our client can access http://myserver.com/reportserver/ from internet explorer.
Our client machine is behind a proxy server . Could this be caused by the proxy server. Why is report builder not prompting for credentials when launched. It only prompts for credentials the first time (installation). Any idea or anyone encountered this issue. we need a fix, because our client cannot access the report builder...
Chi.
Do i have to install ms sql server on ever machine to work Report Builder?
View 5 Replies View Related
Can someone verify that Report Builder is included in SQL Server 2005 Standard edition?
I have a book that says it's only included in Enterprise edition, but the following chart says it is included in Standard:
http://www.microsoft.com/sql/prodinfo/features/compare-features.mspx
Can any body please explain that "how does the Report Builder application communicates with the reporting server".
Does it use web service for that, or does it connect to it directly ?
If it use webservice then where is it situated and what is it's name.
Please explain a bit ?
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies View RelatedAfter I use the report builder to create a generic report, how do I actually get that report into the report designer so that I can modify it more effectivly?
The issue that I have now is that the file on the report server is not a .rdl file and if I simply save it as one and then bring it into VS to modify it the code file is a html structure rater than a XML file type.
Any suggestions would be appreciated. Thanks
I am trying to call a stored procedure into report builder. The stored procedure has 2 parameters. When I run the report with allowing nulls and blank value in the parameters it works fine, but when I enter a value in a parameter it ignores the where clause I had in the original query(stored procedure) and displays everything.
View 3 Replies View Related