If I use attach/detach to move my log file to a different drive, will
it break any of my permissions for the sql logins. If so, how can I fix
this.
This all stemmed from needing to setup log shipping to another server
for redundancy. Step 1 says to create a share where the log files
reside. Well the sql server was installed by a previous employee and
the log files are in the same directory as the data files. I would feel
more comfortable (security wise) if I only shared out the directory
where the log files lived.
If anyone thinks that I am traveling down the wrong path or has any
suggestions, please let me know.
Hi, I'm using SQL 2005 express edition and my database files are in the MSSQL.1MSSQLData folder. When I'm trying to copy them I get "Files already in Use" error. How do I stop the server from running (services or command line). Or is there a better why to export them to a diffrent location.
I need to move backup files from the production server to another server. This would be regularly scheduled file move only for security reasons. The target server does not have SQL Server installed. Which is the best way to do this?
I need to move the errorlog files from the d: drive to the e: drive on my NT servers. Does anyone know a way to accomplish this without having to re-install? Thanks tcb
Sorry for the ultra-beginner question, but I've just recently started playing with SQL 2005 Express Edition for a task I've been assigned to at work.
I'm building an ASP.NET 2.0 web site that needs to connect to a SQL database to pull information. I installed SQL Express 2005 and installed the SQL Server Management Studio and I've managed to build a small database with one table.
I noticed that by default, the mdf and ldf files are located in C:Program FilesMS SQL ServerMSSQLDATA (or something along those lines). The website I'm working on is temporarily stored in C:WebSite. I need to move the database files over to C:WebSiteApp_Data so I can access them easily with ASP.NET and VS 2005 Express.
I can copy and paste the mdf and ldf files, but then I can't figure out how to point the SQL Server Management Studio to the new location.
I am obviously just a complete newbie at all of this. It's pretty sad that I can't figure out how to simply move the database from one directory to another on the same server... it makes me worry about when I'll need to move it to the new webserver!
Could anyone point me in the right direction at least?
I have been instructed to move a large database we have on one of our servers off the current drive (local RAID-5 driveset in the server) to a EMC "drive" (logical drive, off-server).
I know one option is to back up the database, delete the database, re-create the db using the new drive for data/log files, then restore the database.
However, I was wondering if it would be better to just detach the DB, move the data/log files, then reattach to them?
Is it half-doz of one, and 6 of the other?
How should I go about this dastardly deed?
Off to poke around in BOL, but thought I would post first in case it's an incredibly easy answer for y'all
after moving the resource database files with this command:
ALTER DATABASE mssqlsystemresource MODIFY FILE (NAME=data, FILENAME= 'new_path_of_mastermssqlsystemresource.mdf'); GO ALTER DATABASE mssqlsystemresource MODIFY FILE (NAME=log, FILENAME= 'new_path_of_mastermssqlsystemresource.ldf'); GO
I am getting this error trying to do anything in the instance while I have it started in minimal mode (/f /t3608)
(the instance WILL NOT COME UP UNLESS I USE THE /F /T3608 from a command promt.. please .. any suggestions?????????????????????? Also.. I checked and the primary file is NOT READ-ONLY.
File activation failure. The physical file name "E:MSSQLKOCSQLDEV01Datafilesmssqlsystemresource .ldf" may be incorrect.
The log cannot be rebuilt when the primary file is read-only.
File activation failure. The physical file name "E:MSSQLKOCSQLDEV01Datafilesmssqlsystemresource .ldf" may be incorrect.
The log cannot be rebuilt when the primary file is read-only.
Msg 945, Level 14, State 2, Line 1
Database 'mssqlsystemresource' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
Trying to find out if this is the best way to move log files in databases that are in an availability group.
remove the DB from the AG Run alter database commands like you would normally to take offline ,move file,bring online ,etc drop the db from secondary node then rejoin the DB to the AG
Is that the only option for moving them when its in an avail group? cant find any other info on moving files in mirrors or HA groups
I have a number of XLS reports in template form. I want to move these to a new location on the File Server and after they have been populated move them to another location on the File Server.
I have seen some proposed solutions but I haven€™t found any that work. This should not be difficult and I envisage using a File System Task and a Foreach Loop Container. However passing the multiple file names to the File System Task errors repeatedly.
I have a database [CarlosDB] that currently has it's .MDF on E: and I need to move the x2 .NDF data files off C: to E:data using a single T-SQL statement:
Looking at the file configuration above, what would be the most logical way as a DBA / SQL Server 2014 Std to move the NDF files to live w/ the MDF file using:
Hello, I have been having a bit of trouble finding help on the safestway to move data files to a different disk on the same server. Mosthelp is about moving data files to a different sqlserver. I just wantto move the files to a different drive on the same server. Any helpwould be appreciated.Thanks,David
I am using SQL 2012 SE. I am trying to move .mdf and .ndf files after a database is detached. Here is my code that is just to copy the mdf file. I am testing it against this file now and if it worked then I would do the move ldf file the same way.
EXEC master.dbo.sp_configure 'show advanced options', 1 RECONFIGURE WITH OVERRIDE GO EXEC master.dbo.sp_configure 'xp_cmdshell', 1 RECONFIGURE WITH OVERRIDE DECLARE @cmd nvarchar(4000)
[Code] ...
The only message is I see while the query is executing is :Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
If I manually copy over the file it takes 30 seconds since the file is only 2GB and the script takes 45 minutes and still executing.
Have a SQL2008R2 instance on a VM where the single .mdf for the tempDb database is located on a high contention disk. Â I've managed to get another 60GB disk and thought it would be a good time to move the .mdf and also increase it's size and number of files.Â
The server has 12 cores and after a bit of reading I've decided that it would be best just to have four files for this database as the 1 file per core (-1) seems to be disputed. Â
-- Move the existing file to the new disk and rename it. ALTER DATABASE tempdb MODIFY FILE (NAME='tempdev', FILENAME='E:SQLData empdb0.mdf');
-- Change the size to 1GB ALTER DATABASE tempdb MODIFY FILE (NAME='tempdev', SIZE= 1048576KB, FILEGROWTH=5%);
-- Add three new files, all with the same size & growth ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev1', FILENAME = N'E:SQLData empdb1.mdf' , SIZE = 1048576KB , FILEGROWTH = 5%) ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev2', FILENAME = N'E:SQLData empdb2.mdf' , SIZE = 1048576KB , FILEGROWTH = 5%) ALTER DATABASE [tempdb] ADD FILE ( NAME = N'tempdev3', FILENAME = N'E:SQLData empdb3.mdf' , SIZE = 1048576KB , FILEGROWTH = 5%)
-- Now restart the instance. Â Also, what are peoples thoughts on percentage growth for tempDb? Â I've read that it's not recommend and yet it seems to be the norm.
What I am trying to achieve currently with SSIS is to view the content in one folder for example 'New' and if there is files in this then move it to 'Archived'.
Any nice liinks or tutorial or general advice you guys could give me ?
I'm trying to move a log file of a database that is part of an availability group. I have been following steps from the article: [URL]
At first this worked fine for me in a test environment. When I tried it in a production environment the database on the secondary went into "Recovery Pending" state and I can't get it out.
I checked to ensure that the dB is looking in the right place for the log file, and it is. It just doesn't seem to actually use the new file. If I start and stop SQL service, the dB comes back up and is fine.
Here are the steps I'm going through and what is happening at each step:
-------------------------------------- :Connect DEVSQL --This is currently PRIMARY USE[master] GO ALTER AVAILABILITY GROUP [DP-AG-DEV] MODIFY REPLICA ON N'DEVSQL' WITH (SECONDARY_ROLE(ALLOW_CONNECTIONS = NO))
[Code] ....
All is good so far. Both the Primary and the Secondard have had their logical files changed, which has not taken affect yet because there has been no failover.
--Make SQL10 the PRIMARY :Connect SQL10 ALTER AVAILABILITY GROUP [DP-AG-DEV] FAILOVER; GO
SQL10 is now the Primary for this AG. And, as expected, the database [AG-Test] is in "Recovery Pending" because it is now looking for the log file in the new location. I need to move the file to the new location.
:Connect DEVSQL --Enable XP_CMDSHELL sp_configure 'show advanced options',1 go reconfigure go sp_configure 'xp_cmdshell',1
[code].....
This is where the script is failing, returning the error:
Msg 1468, Level 16, State 5, Line 5
The operation cannot be performed on database "AG-Test" because it is involved in a database mirroring session or an availability group. Some operations are not allowed on a database that is participating in a database mirroring session or in an availability group.
Msg 5069, Level 16, State 1, Line 5
ALTER DATABASE statement failed.
I can not get the dB to recognize the log file at it's new location.
If I restart the SQL Service, it comes back fine, which seems to indicate to me that it is not a permission problem and confirms that the file is in the right place.
How do I force SQL to look for the log file again without restarting the service?
Hi JayH (or anyone). Another week...a new set of problems. I obviously need to learn .net syntax, but because of project deadlines in converting from DTS to SSIS it is hard for me to stop and do that. So, if someone could help me some easy syntax, I would really appreciate it.
In DTS, there was a VBScript that copied a set of flat files from one directory to an archive directory after modifying the file name. In SSIS, the directory and archive directory will be specified in the config file. So, I need a .net script that retrieves a file, renames it and copies it to a different directory.
I trying to get the moving total (juts as moving average). It always sum up the current record plus previous two records as well and grouped by EmpId.For example, attaching a image of excel calculation.
I proposed on a new server that we separate Data Files, Log Files, tempDB, Backups, etc. onto separate LUNS on a SAN with High Speed Solid State Drives.I was told that with the new technology with solid state SAN's that it would decrease performance and that it did not work the same way as it did when you had RAID 5's etc.I thought that if things were cared out correctly by a SAN Administrator they would know how to configure for optimal performance.
In the For Loop, How to Iterate from Older flat files to Newer flat files based on File's Timestamp. If there are some older files in that folder, it should be processed first and then continue with the newer one.
In the first step of my SSIS package I need to get files from FTP and dump it/them in a local directory, but it's more than that, the logic is like this: 1. If no file(s) found, stop executing and send email saying no file(s) found; 2. If file(s) found, then compare it/them with existing files in our archive folder; if file(s) already exist in archive folder, stop executing and send email saying file(s) already existed, if file(s) not in archive folder yet, then transfer it/them to the local directory for processing.
I know i have to use a script task to do this and i did some research and found examples for each of the above 2 steps and not both combined, so that's why I need some help here to get the logic incorporated right.
Thanks for the help in advance and i apologize for the long lines of code!
example for step 1: ----------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task ' Write scripts using Microsoft Visual Basic ' The ScriptMain class is the entry point of the Script Task.
' The execution engine calls this method when the task executes. ' To access the object model, use the Dts object. Connections, variables, events, ' and logging features are available as static members of the Dts class. ' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure. ' ' To open Code and Text Editor Help, press F1. ' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Dim cDataFileName As String Dim cFileType As String Dim cFileFlgVar As String WriteVariable("SCFileFlg", False) WriteVariable("OOFileFlg", False) WriteVariable("INFileFlg", False) WriteVariable("IAFileFlg", False) WriteVariable("RCFileFlg", False) cDataFileName = ReadVariable("DataFileName").ToString cFileType = Left(Right(cDataFileName, 4), 2) cFileFlgVar = cFileType.ToUpper + "FileFlg" WriteVariable(cFileFlgVar, True) Dts.TaskResult = Dts.Results.Success End Sub Private Sub WriteVariable(ByVal varName As String, ByVal varValue As Object) Try Dim vars As Variables Dts.VariableDispenser.LockForWrite(varName) Dts.VariableDispenser.GetVariables(vars) Try vars(varName).Value = varValue Catch ex As Exception Throw ex Finally vars.Unlock() End Try Catch ex As Exception Throw ex End Try End Sub Private Function ReadVariable(ByVal varName As String) As Object Dim result As Object Try Dim vars As Variables Dts.VariableDispenser.LockForRead(varName) Dts.VariableDispenser.GetVariables(vars) Try result = vars(varName).Value Catch ex As Exception Throw ex Finally vars.Unlock() End Try Catch ex As Exception Throw ex End Try Return result End Function End Class
example for step 2: -------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Try
'Create the connection to the ftp server
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
It works remotely if I run it via command prompt. But when I add this to a TSQL job on my remote SQL instance, it runs without deleting anything. What I'm missing?
Brief overview...Running SQL Server 2003 Server Enterprise 64 bit - All Service Packs and patches current SQL Server 2005 Enterprise Edition 64 bit Build Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
I cannot import any SSIS packages nor crete any new folders under stored packages. I hve googled the news groups and looked at BOL to no avail. HELP!!!!
I am thinking about replacing the INSERT data scriptfiles that I have with XML files. This way I can open the XMLfile using an XML Editor and see the values in a GRID andmake changes easier.Do you see any problem with this approach?I managed to put together some code that is exportinga SQL table with its data to an XML file and also a codethat reads the XML file's data and inserts it into a table.Now I am researching on XSD, td:datatype, DTD...(I am new to XML) in order to figure out how I canuse a single xml file that will hold both the sql serverfields, the datatypes and their values.If you have links to some sample code that has anythingto do with the datatype export and import I am workingon, can you please share them with me?Most importantly what do you think about the idea of usingXML files vs sql scripts?Thank you
I am wanting to reduce the amount of Virtual Log Files I have. In reading through the Online Book Documentation, I realize that I have forgotten to move the Transaction Log Files to a different drive. Now that the server is in production, I wanted to get some input about the best way of making this change.
Can I just change the directory the log files are being written to in the DB properties without having any adverse problems occurring?
Hi! I'm using replication with two database on SQL 2000,when begin, the log files size is 50mb and the data files size is 150mb. But now the log files size is 2Gb and the data files size is 4Gb. I would like to decrease the log files and the data files ??? How do i do this??? (I using Truncate and shrink doesn't change ) Thanks!!!
I need to write codes to access many image files and wave files and display them on the webpage. Both of these files are stored on the server (as many experts in this forum adviced) and their locations are in the SQL server database. About the wav files, I think I will have to convert them to MP3 first for fast delivery on internet. Since I am a newbie, any help would be appreciated. Thanks,
