Mulit Table Insert

Aug 19, 2007

Can some one point me in the right direction on this. I am trying to insert data into two different table. The problem is, even though table 2 had a "not null" on it's primary, the insert command still allow it to be null.

Here is what I am trying to do. When I click the submit button on my web app, it should send this information in for to table 2. The procedure should then pull the id2 and and enter it into the table as FK to table 1.

Like I said before, the id2 doesn't seem to pass any data because the procedure is passing a null, even thout a set the pk value to not null.


DECLARE @identHolder int
DECLARE @ID2 int

BEGIN TRANSACTION
IF NOT EXISTS (SELECT ID2 FROM [tbl2] WHERE ID1 = @ID2)
BEGIN
(SELECT 2ID FROM [tbl2] WHERE ID1 = @ID1) SET @identHolder = @@Identity

END
ELSE
BEGIN
INSERT INTO [t2] ([fName], [lName], [shift], [userName], [emailAdd])
VALUES ( @fName, @lName, @shift, @userName, @emailAdd) SET @identHolder = @@Identity

END
COMMIT

SET @ID2 = (@@Identity)
INSERT INTO [tbl1]([ID1], [ID2], [event], [removed])
VALUES (@ID1, @ID2, @event, @removed)

View 8 Replies


ADVERTISEMENT

Standard Edition's Support Of 4 Processors - Does This Exclude Mulit-core Procs?

Feb 13, 2008

When Standard Edition says it supports 4 processors, is this just the physical processor or do we have to factor in multiple cores?

If SE supports 4 physical quad-core processors, is it written to optimally utilize the quad-core technology or would I be better off using Enterprise Edition?

Dave

View 4 Replies View Related

T-SQL (SS2K8) :: Stored Procedure To Truncate And Insert Values In Table 1 And Update And Insert Values In Table 2

Apr 30, 2015

table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt

process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)

* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.

View 2 Replies View Related

I Have Created A Table Table With Name As Varchar And Id As Int. Now I Have Started Inserting The Rows Like, Insert Into Table Values ('arun',20).

Jan 31, 2008

I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50.                 insert into Table values('arun's',20)  My sqlserver is giving me an error instead of inserting the row. How will you solve this problem? 
 

View 3 Replies View Related

Strange Problem: SQL Insert Statement Does Not Insert All The Fields Into Table From Asp.net C# Webpage

Apr 21, 2008

An insert statement was not inserting all the data into a table. Found it very strange as the other fields in the row were inserted. I ran SQL profiler and found that sql statement had all the fields in the insert statement but some of the fields were not inserted. Below is the sql statement which is created dyanmically by a asp.net C# class. The columns which are not inserted are 'totaltax' and 'totalamount' ...while the 'shipto_name' etc...were inserted.there were not errors thrown. The sql from the code cannot be shown here as it is dynamically built referencing C# class files.It works fine on another test database which uses the same dlls. The only difference i found was the difference in date formats..@totalamount=1625.62,@totaltax=125.62are not inserted into the database.Below is the statement copied from SQL profiler.exec sp_executesql N'INSERT INTO salesorder(billto_city, billto_country, billto_line1, billto_line2, billto_name,billto_postalcode, billto_stateorprovince, billto_telephone, contactid, CreatedOn, customerid, customeridtype,DeletionStateCode, discountamount, discountpercentage, ModifiedOn, name, ordernumber,pricelevelid, salesorderId, shipto_city, shipto_country,shipto_line1, shipto_line2, shipto_name, shipto_postalcode, shipto_stateorprovince,shipto_telephone, StateCode, submitdate, totalamount,totallineitemamount, totaltax ) VALUES(@billto_city, @billto_country, @billto_line1, @billto_line2,@billto_name, @billto_postalcode, @billto_stateorprovince, @billto_telephone, @contactid, @CreatedOn, @customerid,@customeridtype, @DeletionStateCode, @discountamount,@discountpercentage, @ModifiedOn, @name, @ordernumber, @pricelevelid, @salesorderId,@shipto_city, @shipto_country, @shipto_line1, @shipto_line2,@shipto_name, @shipto_postalcode, @shipto_stateorprovince, @shipto_telephone,@StateCode, @submitdate, @totalamount, @totallineitemamount, @totaltax)',N'@billto_city nvarchar(8),@billto_country nvarchar(13),@billto_line1 nvarchar(3),@billto_line2 nvarchar(4),@billto_name nvarchar(15),@billto_postalcode nvarchar(5),@billto_stateorprovince nvarchar(8),@billto_telephone nvarchar(3),@contactid uniqueidentifier,@CreatedOn datetime,@customerid uniqueidentifier,@customeridtype int,@DeletionStateCode int,@discountamount decimal(1,0),@discountpercentage decimal(1,0),@ModifiedOn datetime,@name nvarchar(33),@ordernumber nvarchar(18),@pricelevelid uniqueidentifier,@salesorderId uniqueidentifier,@shipto_city nvarchar(8),@shipto_country nvarchar(13),@shipto_line1 nvarchar(3),@shipto_line2 nvarchar(4),@shipto_name nvarchar(15),@shipto_postalcode nvarchar(5),@shipto_stateorprovince nvarchar(8),@shipto_telephone nvarchar(3),@StateCode int,@submitdate datetime,@totalamount decimal(6,2),@totallineitemamount decimal(6,2),@totaltax decimal(5,2)',@billto_city=N'New York',@billto_country=N'United States',@billto_line1=N'454',@billto_line2=N'Road',@billto_name=N'Hillary Clinton',@billto_postalcode=N'10001',@billto_stateorprovince=N'New York',@billto_telephone=N'124',@contactid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@CreatedOn=''2008-04-18 13:37:12:013'',@customerid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@customeridtype=2,@DeletionStateCode=0,@discountamount=0,@discountpercentage=0,@ModifiedOn=''2008-04-18 13:37:12:013'',@name=N'E-Commerce Order (Before billing)',@ordernumber=N'BRKV-CC-OKRW5764YS',@pricelevelid='B74DB28B-AA8F-DC11-B289-000423B63B71',@salesorderId='9CD0E11A-5A6D-4584-BC3E-4292EBA6ED24',@shipto_city=N'New York',@shipto_country=N'United States',@shipto_line1=N'454',@shipto_line2=N'Road',@shipto_name=N'Hillary Clinton',@shipto_postalcode=N'10001',@shipto_stateorprovince=N'New York',@shipto_telephone=N'124',@StateCode=0,@submitdate=''2008-04-18 14:37:10:140'',@totalamount=1625.62,@totallineitemamount=1500.00,@totaltax=125.62
 
thanks

View 7 Replies View Related

OPENROWSET (INSERT) Insert Error: Column Name Or Number Of Supplied Values Does Not Match Table Definition.

Mar 24, 2008

Is there a way to avoid entering column names in the excel template for me to create an excel file froma  dynamic excel using openrowset.
I have teh following code but it works fien when column names are given ahead of time.
If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match.
 Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition.
here is my code...
SET @sql1='select * from table1'SET @sql2='select * from table2'  
IF @File_Name = ''      Select @fn = 'C:Test1.xls'     ELSE      Select @fn = 'C:' + @File_Name + '.xls'        -- FileCopy command string formation     SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn     
-- FielCopy command execution through Shell Command     EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT        -- Mentioning the OLEDB Rpovider and excel destination filename     set @provider = 'Microsoft.Jet.OLEDB.4.0'     set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn   
exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT *     FROM [Sheet1$]'')      '+ @sql1 + '')         exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT *     FROM [Sheet2$]'')      '+ @sql2 + ' ')   
 
 

View 4 Replies View Related

Insert Command Fails When I Want To Insert Records In Data Table

Apr 20, 2008

On my site users can register using ASP Membership Create user Wizard control.
I am also using the wizard control to design a simple question and answer  form that logged in users have access to.
it has 2 questions including a text box for Q1 and  dropdown list for Q2.
I have a table in my database called "Players" which has 3 Columns
UserId Primary Key of type Unique Identifyer
PlayerName Type String
PlayerGenre Type Sting
 
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table.
I am having problems getting this to work and keep getting exceptions.
 Be very helpful if somebody could check the code and advise where the problem is??
 
 
<asp:Wizard ID="Wizard1" runat="server" BackColor="#F7F6F3"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px"
DisplaySideBar="False" Font-Names="Verdana" Font-Size="0.8em" Height="354px"
onfinishbuttonclick="Wizard1_FinishButtonClick" Width="631px">
<SideBarTemplate>
<asp:DataList ID="SideBarList" runat="server">
<ItemTemplate>
<asp:LinkButton ID="SideBarButton" runat="server" BorderWidth="0px"
Font-Names="Verdana" ForeColor="White"></asp:LinkButton>
</ItemTemplate>
<SelectedItemStyle Font-Bold="True" />
</asp:DataList>
</SideBarTemplate>
<StepStyle BackColor="#669999" BorderWidth="0px" ForeColor="#5D7B9D" />
<NavigationStyle VerticalAlign="Top" />
<WizardSteps>
<asp:WizardStep runat="server">
<table class="style1">
<tr>
<td class="style4">
A<span class="style6">Player Name</span></td>
<td class="style3">
<asp:TextBox ID="PlayerName" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="PlayerName" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
<tr>
<td class="style5">
 
<td class="style3">
<asp:DropDownList ID="PlayerGenre" runat="server" Width="128px">
<asp:ListItem Value="-1">Select Genre</asp:ListItem>
<asp:ListItem>Male</asp:ListItem>
<asp:ListItem>Female</asp:ListItem>
</asp:DropDownList>
</td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server"
ControlToValidate="PlayerGenre" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
 
</tr>
</table>
  Sql Data Source
<asp:SqlDataSource ID="InsertArtist1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" InsertCommand="INSERT INTO [Playerst] ([UserId], [PlayerName], [PlayerGenre]) VALUES (@UserId, @PlayerName, @PlayerGenre)"
 
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters>
<asp:Parameter Name="UserId" Type="Object" />
<asp:Parameter Name="PlayerName" Type="String" />
<asp:Parameter Name="PlayerGenre" Type="String" />
</InsertParameters>
 
 
</asp:SqlDataSource>
</asp:WizardStep>
 
 Event Handler
 
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e)
{
 SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1");
MembershipUser myUser = Membership.GetUser(this.User.Identity.Name);
Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue;
DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString());
DataSource.Insert();
 
}
 

View 1 Replies View Related

How To Insert Data From A File Into Table Having Two Columns-BULK INSERT

Oct 12, 2007



Hi,
i have a file which consists data as below,

3
123||
456||
789||

Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.


BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')

but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.

can anyone help me how to do this?

Thanks,
-Badri

View 5 Replies View Related

SQL Server 2008 :: Insert From Table 1 To Table 2 Only If Record Doesn't Exist In Table 2?

Jul 24, 2015

I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query

INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)

[Code] ....

View 4 Replies View Related

Default Table Owner Using CREATE TABLE, INSERT, SELECT && DROP TABLE

Nov 21, 2006

For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.

View 6 Replies View Related

Wants To Insert Into Multiple Table By A Single Insert Query

Apr 11, 2008

Hi,ALL
I wants to insert data into multiple table within a single insert query
Thanks

View 3 Replies View Related

Multiple Insert Call For A Table Having Insert Trigger

Mar 1, 2004

Hi

I am trying to use multiple insert for a table T1 to add multiple rows.

Ti has trigger for insert to add or update multiple rows in Table T2.

When I provide multiple insert SQL then only first insert works while rest insert statements does not work

Anybody have any idea about why only one insert works for T1

Thanks

View 10 Replies View Related

Insert To Recordset Gives Different Date Format To Table Insert ????????

Jun 28, 2007

Help please!



I have an asp page with some simple vbscript to add a record to a table, the record has a datefield (dob).

the insert results in a US formated date if I add a record to a dynamic recordset but a UK formated date if I insert direct to the table ?????

i.e.

if request("dob") is "01/11/2007" (1st november 2007)





set conn = server.createobject("adodb.connection")

set rs = server.createobject("adodb.recordset")

rs.open "tez", mc, 2, 2 rs.addnew

rs("dob") = request("dob")

rs.update



11 jan 2007 stored in table



while



set trs = Server.CreateObject("ADODB.RecordSet")

qfn= "insert tez values('"+request("dob")+"')"

trs.Open qfn,mc



results in

1 november 2007 is written to the table.

Both of these methods are used in the same asp page.



This is on a windows2003 server, sql2005,iisv6, asp.netv2



I have tried every setting I can find in iis,asp,sql server to no avail.

I need the recordset method to work correctly.



Terry



View 8 Replies View Related

SQL Server 2008 :: Insert Data Into Table Variable But Need To Insert 1 Or 2 Rows Depending On Data

Feb 26, 2015

I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)

I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !

Below is the code i have at the moment

declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT

set @startdate = '2015-01-01'
set @enddate = '2015-01-31'

[Code] .....

View 1 Replies View Related

SQL Server 2012 :: Compare Two Table Data And Insert Changed Field To Third Table

Aug 12, 2014

I want Compare two Table data and insert changed field to the third table ...

View 9 Replies View Related

INSERT New Record Works OK In Local Table, BUT Not If The Target SS DB/table Is In A Different Physical Server

Apr 23, 2008



Hi... I was hoping if someone could share me some thoughts with the issue that I am having at the moment.

Problem: When I run the package in my local machine and update local SS DB/table - new records writes OK in the table. BUT when I changed my destination meaning write record into another physical SS DB/table there is no INSERT data occurs. AND SO when I move/copy over that same package into another server (e.g. server that do not write record earlier) and run it locally IT WORKS fine too.

What I am trying to do is very simple - Add new records in a SS table using SSIS . I only care for new rows and not even changed rows.
Here is my logic -
1. Create Ole DB source to RemoteSERVER - using SELECT stmt
2. I have LoopUp component that will look for NEW records - Directs all rows that don't find match and redirect rows (error output).
3. Since I don't care for any rows that is matched in my lookup - I do nothing or I trash the rows
4. I send the error rows (NEW rows) into OleDB destination

RESULTS when I run the package locally and destination table is also local - WORKS FINE;
But when I run the package locally and destination table is in another Sserver (remote) - now rows is written.

The package is run thru BIDS manually so there is no sucurity restrictions attached to it.

I am not sure what I am missing. And I do not see error in my package either. It is not failing.

Thanks in advance!



View 6 Replies View Related

SSMS Express: Create TABLE &&amp; INSERT Data Into Table - Error Msgs 102 &&amp; 156

May 18, 2006

Hi all,

I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.

Thanks in advance,

Scott Chang

///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.

View 7 Replies View Related

Insert Data Into A Table From Two Tables Into A Single Table Along With A Hard Coded Value?

Feb 9, 2012

I'm trying to insert data into a table from two tables into a single table along with a hard coded value.

insert into TABLE1
(THING,PERSONORGROUP,ACCESSRIGHTS)
VALUES
((select SYSTEM_ID from TABLE2 where
AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID
=('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID
=('USER2')),255)

I get the following-

Msg 512, Level 16, State 1, Line 1

Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.

The statement has been terminated.

Do I need to use a cursor?

View 5 Replies View Related

SQL Server Admin 2014 :: Insert A Row To A Table Based On Table Values?

Jun 10, 2015

Here is my table:

My question is: How can I insert a row for each unique TemplateId. So let's say I have templateIds like, 2,5,6,7... For each unique templateId, how can I insert one more row?

View 0 Replies View Related

Count All Table Rows Then Insert Into Test Table Using SSIS Packages

Jul 15, 2013

I have database test007DB and I need count all table rows then insert into test99 table using ssis packages .

test99: tableName countRows
t1 20
t2 30
t3 25

View 2 Replies View Related

INSERT INTO - Data Is Not Inserted - Using #temp Table To Populate Actual Table

Jul 20, 2005

Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO

View 2 Replies View Related

Using An Exec Query To Insert Pdf, .doc File Into Table From A Dir Path Which Is A Field In Another Table

Aug 5, 2007

I have the following query in sql 2005:


PROCEDURE [dbo].[uspInsert_Blob] (

@fName varchar(60),

@fType char(5),

@fID numeric(18, 0),

@bID char(3),

@fPath nvarchar(60)

)



as

DECLARE @QUERY VARCHAR(2000)

SET @QUERY = "INSERT INTO tblDocTable(FileName, FileType, ImportExportID, BuildingID, Document)

SELECT '"+@fName+"' AS FileName, '"+@fType+"' AS FileType, " + cast(@fID as nvarchar(18)) + " as ImportExportID, '"+@bID+"' AS BuildingID, * FROM OPENROWSET( BULK '" +@fPath+"' ,SINGLE_BLOB)

AS Document"

EXEC (@QUERY)

This puts some values including a pdf or .doc file into a table, tblDocTable.

Is it possible to change this so that I can get the values from a table rather than as parameters. The Query would be in the form of: insert into tblDocTable (a, b, c, d) select a,b,c,d from tblimportExport.

tblImportExport has the path for the document (DocPath) so I would subsitute that field, ie. DocPath, for the @fPath variable.

Otherwise I can see only doing a Fetch next from tblIportExport where I would put every field into a variable and then run this exec query on these. Thus looping thru every row in tblImportExport.

Any ideas how to do this?

View 1 Replies View Related

Append Query To Insert 80000 From One Table To Empty Table

Jul 22, 2012

All, Using access 2003 frontend and sql server 2008 backend. I have an append query to insert 80000 from one table to an empty table. I get an error:

"Microsoft Office Access set 0 field(s) to Null due to a type conversion failure, and didn't add 36000 record(s) to the table due to key violations, 0 record(s) due to lock violations, and 0 record(s) due to validation rule violations."

I know this error normally comes if there are dups in a field that doesnt allow.

View 1 Replies View Related

SQL Server 2012 :: Insert Into Table With Identity Columns From Another Table

Dec 23, 2013

I just created a new table with over 100 Columns and I need to populated just the first 2 columns.

The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.

column1 = ID
column2= P_CLIENT_D

SET IDENTITY_INSERT PIM1 ON

INSERT INTO PIM1 (P_CLIENT_ID)
SELECT
Client.ID
FROMP_Client

So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.

View 1 Replies View Related

Transact SQL :: Insert A Record Into Second table Where There Is Not A Match In First Table

Jun 25, 2015

I have a table in different databases with the same name.  My goal is to compare the two tables, and insert a record into the second table where there is not a match in the first table.  So far, my query looks like the following:

SELECT [metal] FROM [ProductionDatabase].[dbo].[Metalurgy]
EXCEPT
SELECT [metal] FROM [TestDatabase].[dbo].[Metalurgy]

This gives me a list of records from [Production].[dbo].[Metalurgy] which do not reside in [TestDatabase].[dbo].[Metalurgy].  Now, I need to use that list to insert missing records into [TestDatabase].[dbo].[Metalurgy].  How can I modify the above code to INSERT the missing records?

View 4 Replies View Related

DB Design :: Insert / Update FACT Table From Staging Table

May 6, 2015

We need to Insert/Update a Fact Table from staging Table. currently we are using a SP which update Fact Table for Each region.  this process is schedule,  every 5 min job is run and Update fact table.but time of Insert and Update too long from  staging  to Fact, currently we are using merge statement for Insert and update.in my sp we are looping number  how many region we need to update and at a time single Region we are updating using while loop in current SP.

View 7 Replies View Related

Is It Possible To Insert Data Into A Table From A Temporary Table That Is Inner Join?

Mar 10, 2008

Is it possible to insert data into a table from a temporary table that is inner join?
Can anyone share an example of a stored procedure that can do this?
Thanks,
xyz789

View 2 Replies View Related

Stored Procedure For Insert Data From One Table To Another Table

Apr 25, 2006

Hi,
     I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table.
Overall it is like storing the history of the table updation.
How do i write a stored procedure for this?
Anybody has done this before?
Pls help me.
 

View 1 Replies View Related

T-SQL (SS2K8) :: Insert Causing Delay From Table To Table

Oct 28, 2014

I am trying to move data from one table to the another (staging to real time) in a stored procedure.

There are no indexes or primary keys on the target table and it is still taking ages to execute it (30 minutes approx.). There are no defaults, no constraints as well. There is one identity int column though.

There are some 500000 odd rows in the target table.

I am using the

Insert into..
Select from..

method.

View 2 Replies View Related

T-SQL (SS2K8) :: Insert Subset Of Self-referencing Table Into That Table

Mar 19, 2015

IF OBJECT_ID('tTable') IS NOT NULL
DROP TABLE tTable
GO

CREATE TABLE tTable
(nRow_IdINTEGER IDENTITY NOT NULL PRIMARY KEY,
nParent_IdINTEGERNULL,

[Code] ....

gives:

nRow_Id nParent_Id cGroup cValue
----------- ----------- ------- ------
1 1 One A
2 1 One B
3 2 One C

I want to insert a copy of this data, but w/ group = 'TWO', so the table will contain the additional rows

4 4 Two A
5 4 Two B
6 5 Tow C

View 5 Replies View Related

SQL Server 2008 :: How To Get Column From Another Table And Insert Into Other Table

May 18, 2015

I have two table 'Cal_date' and 'RPT_Invoice_Shipped'.Table cal_data has column month_no, start_date and end_date. And table RPT_Invoice_Shipped has columns Day_No, Date, Div_code, Total_Invoiced, Shipped_Value, Line_Shipped, Unit_Shipped, Transaction_Date.

I am using below insert statment to insert data in RPT_Invoice_Shipped table.

insert into [Global_Report_Staging].[dbo].[RPT_Invoice_Shipped]
(Day_No, Date, Div_code, Total_Invoiced, Transaction_Date)
select , CONVERT(DATE,Getdate()) as Date, LTRIM(RTRIM(div_Code)),
sum(tot_Net_Amt) as Total_Invoiced, (dateadd(day, -1, convert(date, getdate())))
from [Global_Report_Staging].[dbo].[STG_Shipped_Invoiced]
WHERE CONVERT(DATE,Created_date )=CONVERT(DATE,Getdate())
group by div_code

while inserting in column Day_No in RPT_Invoice_Shipped table, I have to use formula (Transaction_Date-start_date+1) where Transaction_Date from STG_Shipped_Invoiced and start_date from Cal_date table. I was using datepart (mm, Transaction_Date) so it gives month_no, and this month_no we can join with month_no of Cal_date table and fetch start_date from Cal_date table, so that we can use start_date for formula (Transaction_Date-start_date+1).

But I am getting difficulty to arrange this in above query. how to achieve this?

View 1 Replies View Related

Transact SQL :: If Not Exists Some ID In One Table Then Insert ID And Description In Another Table

Jul 14, 2015

I need to find out if a Transaction ID exists in Table A that does not exist in Table B.  If that is the case, then I need to insert into Table B all of the Transaction IDs and Descriptions that are not already in. Seems to me this would involve If Not Exists and then an insert into Table B.  This would work easily if there were only one row.  What is the best way to handle it if there are a bunch of rows?  Should there be some type of looping?

View 12 Replies View Related

How To Insert Rows To Table B Based On Values In Table A.

Mar 7, 2008



I need Insert rows in the OrderDetails Table based on values in the Orders Table

In the Orders table i have a columns called OrderID and ISale.
In the OrdersDetails i have columns called OrderID and SaleType


For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD.
That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD



Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD
That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.


I need a SQL Script to accomplish this. thanks

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved