Multi Column Subreport
Aug 22, 2006Hi,
I am trying to use a multi column report as a subreport. I want to know how can I do it without loosing multi column.
Thanks,
-Rohit
Hi,
I am trying to use a multi column report as a subreport. I want to know how can I do it without loosing multi column.
Thanks,
-Rohit
I have a multi-valued parameter that I want to pass to a subreport. The values are 11, 12, 13, and 14.
So here's what I've done:
1. For the properties of the clickable field of the first report, I have gone to the Navigation tab and chosen the subreport in the "jump to report" pulldown.
2. Then I clicked on the Parameters button and added a parameter name for the multi-valued parameter I am trying to send. For the Parameter value, I have tried 11,12,13,14. I have also tried =Split(11,12,13,14)
3. On the subreport, I create a report parameter with the same name, data type is string, multi-value is checked, and the available values pulldown is populated by a query.
So I run the first report and click on the link that brings me to the subreport, but all the subreport shows is the results for 11, not 12, 13, and 14.
How can I get the second report to understand that I want it to show all the records related to 11, 12, 13, and 14? If I bypass the first report and simply use the drop-down to choose 11, 12, 13, and 14 in the subreport, it works fine. I just can't seem to figure out how to correctly have the first report tell the subreport that it wants 11, 12, 13, and 14.
Thanks in advance for any advice!
Dan
Hi everyone,
We are working on a some required report templates and we are in a some deadlock now... We need to desing report templates something like on the image below. There are some data at the left and top (grey rectangles) and dynamic information from a datasource in the middle (actually a list - green rectangles). Our idea was to use a subreport to design required list, but the problem is that subreport does not support multi-columns layout (really very 'interesting' limitation from Microsoft's guys)... Does somebody have a some ideas how to design this report using MS SQL Reporting Services 2005?
http://www.upload-images.net/imagen/de18948ff6.jpg
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
I am trying to create a report with a sub report in Sql Server 2012 using Report Builder Version 3. I can run the subreport without any problems. I read where using a shared connection can cause this error so both the main report and the subreport use a connection that is embedded in my report.
For testing, I created the subreport without a parameter and added it to the main report. When I ran it that way, the report worked and sub report displayed the data. So I know it can read from the database.It seems to only give me this error when I am trying to tie the two reports together using a parameter.
I am trying to exclude records from a table where the ID column is the same but the Mail code Column is multi-valued.For Example: (the table looks like....)
ID Mail_code
111111 XNT
111111 N11
111111 XNC
222222 XNC
222222 XNL
333333 XNC
So, if there is any ID that has a value of XNC, I want to exclude the ID all together from my output regardless of the other values.
Using SSRS 2014 and VS2013 rc5.
How do I hide a subreport if the parent report row containing the subreport is a certain value? I am attempting to create a statement with ageing buckets. In the main body of the report I have to display payments and invoices. If the invoice row is blank, I need to hide the row containing the subreport.
First, Is this even possible?
Second, How?
I have two tables, one a data table, the other a product table. I want to perform a join on the two tables with values distributed into columns based on the value in the month field.
data_table
product_code month value
350 1 10
350 2 20
350 3 30
product_table
product_code profit_center
350 4520
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 20 30
My current query gives the following result
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 0 0
350 4520 0 20 0
350 4520 0 0 30
Any direction toward a solution would be appreciated. Am using SS2005.
Hi,
I have a report which contains a subreport placed inside a list. when the subreport returns no data. it appears as a blank space in the main report. So i want to suppress the list when the subreport returns no data. Can somebody help me with this?
thanks
shri
Hi,Would like to know the performance differenece between Multi-columnIndex vs Single Column Indexes. Let's say I have a table with col1,col2, col3 along with a primary key column and non-indexed columns.In queries, I will use col1, col2, and col3 together and some timesjust one or two of these three columns. My questions is, should Icreate one index contains col1, col2, and col3, or create 3 seperatedcolumns. I.e. each column has its own index. Any performancedifference?Thanks a lot.
View 1 Replies View RelatedIn my report i would have 2 groups.
The first group should cause a real page break, the secound group should cause a column break.
Any idea on how to realize this, i've been playing with quite some settings but .....
So, any help ...
I have a SSRS report in which we have a subreport i am trying to hide the link in excel after exporting from report documents, in report my logic is working fine but when we are deploying in SharePoint application then it is not working. Report is not opening.
View 2 Replies View RelatedI have embedded a subreport in the detail section of my report. When I view the subreport in page preview mode it renders with three columns, but when it is rendered w/in the main report in page preview mode the 3 column layout is rendered as a single verticle column.
I've defined the columns in the Body/Columns. I have also set the report inteactivesize and pagesize heights in an attempt to remedy the issue. Margins are set to 0.
Any help is appreciated.
Can we include a subreport which aslo has another subreport in a master report? (assuming all three reports have parameters too)
Thanks
I have 6 columns:
Column1a, Column1, Column2a, Column2, Column3a, Column3
I need a statement that will go through the whole table as follows:
For each row, if column3 is not null then return column3 as columnB and column3a as ColumnA.
If column3 is null then if column2 is not null then return column2 as columnB and column2a as columnA.
If column3 & column2 is null then return column1 as columnB and column1a as columnA.
Any ideas?
Thanks!
Hi there,
My 'where' clause contains the following...
startdate <= @Date AND enddate > @Date
Should I put one index on 'startDate' and another on 'endDate' or should I have one index that covers both columns?
I don't know what the difference would be.
Cheers, XF.
TABLE1
======================
PriceList
---------
1
2
3
1
2
3
1
2
3
Price
-----
777
888
999
777
888
999
777
888
999
(pretend these columns are side by side)
======================
I need to make a query to:
SELECT PRICE AS 'PRICE1' WHERE PRICELIST = 1
AND SELECT PRICE AS 'PRICE2' WHERE PRICELIST = 2
AND SELECT PRICE AS 'PRICE3' WHERE PRICELIST = 3
the output that i want is:
PRICE1
------
777
777
777
PRICE2
------
888
888
888
PRICE3
-----
999
999
999
(pretend these columns are also side by side)
Hi All,
I have the following Ex:
Table A
Col A <- Col that I need to check against
Col B
Col C <- Sum this col
So if Col A has the following values:
Col A Col C
2 10.00
4 15.00
2 25.00
4 15.00
3 10.00
3 5.00
7 4.00
9 20.00
I need to bring back the sums of 2, 4 and 3 in one resultset. How would I do this?
Thanks,
JJ
Hi,
I have a [TestTable] table with three rows. The pair of columns [Test1] and [Test2] are id, the [Test3] is a data column. First, I get a table variable with list of id pairs. Next, I would like to update the rows of that ids. However, I have not found the elegant way how to do it. For one column it is simple, just IN clause, which does not work (or I could not find how) for multi-columns. Does someone have a hint?
Thanks,
Martin
Note: The example bellow is dummy; on the other hand, I hope it shows the important points. Please, do not beat me on syntax errors.
Code Block
DECLARE @MyTableVar table(
Test1 int NOT NULL,
Test2 int NOT NULL
);
SELECT [Test1],[Test2] INTO @MyTableVar FROM [TestTable] WHERE [Test3] = '%dd%';
UPDATE [TestTable] SET [Test3] = [Test3] + 'ds'
WHERE ([Test1], [Test2]) IN (SELECT [Test1], [Test2] FROM @MyTableVar);
Is it possible to create multi column keys in SQL Express? If so, how?
Thanks
MisterT
What I need to do is to create 3 columns with 3 different aliases from the same table that will return all the values during the following conditions:
when pricelist = 1
when pricelist = 2
when pricelist = 3
pricelist
--------
1
2
3
Price
--------
912 -- (linked with 1)
234 -- (linked with 3)
56 -- (linked with 2)
3245 -- (linked with 3)
234 -- (linked with 1)
65 -- (linked with 2)
these 2 columns are in the same table^^
so what i want my query to generate is:
Price1
--------
912
234
Price2
--------
56
65
Price3
--------
234
3245
Any help is apprecieated, thanks
if the above does not make sense to you maybe this will:
"can you make 3 aliases of the same column and only display the rows inside each column where pricelist = 1 for the 1st alias... where price = 2 for the 2nd alias...where pricelist = 3 for the 3rd alias"
I have a 2 coulmns report ,one group ,when I print the report,it does not paging correctly.For example,suppose every column can display 20 rows, if every group has 20-40 rows ,the print is ok,it can paging correctly,but if one group has 10 rows or more than 40 and less than 60,the two groups will print on one paper,how can I print the every group on different paper?
Any advice would be much appreciated.
Thanks.
I've added a link to a sample on how my test-column report renders.
http://www.leboeuf.be/MSDN/Dagelijkse%20Verkoop%20Merk.pdf
Any idea what's happening, while normally previewing the report (column by page) this problem doesn't occur .... The rendering is the same to TIFF
http://www.leboeuf.be/MSDN/Dagelijkse%20Verkoop%20Merk.tif
Any suggestion on what is the problem and even better, if there is a solution.
Hi,
I have created a multi column report (2 columns), which is working fine. However, I need to have a chart on the same report, but it needs to be the width of the page, and not just the width of one column.
If I could put the chart in the report footer / header that would be perfect, but obviously I can't!
Has anyone else come across this, and any ideas / suggestions you have would be appreciated!
Cheers
Chris
I have a table with a data cell which is printing top-to-down
1
2
3
4
5
6
7
8
I want it to print like
1 2 3 4 5 6 7
How to do this??
The cell is in a group detials sections. and I am using Reporting Services 2000 with VS.NET 2003
Thanks in Advance
I am trying to get a simple list to wrap and print in multiple columns on my report. I have indicated 3 multi-columns in the report properties and see the multiple columns in the layout, but I must need to do something else because the report is still printing in one column to multiple pages. This should all fit on 1 page if the list will wrap or snake as it says it the directions for using multi-column reports.
Any help would be appreciated. Thanks
How to replace this Case When
SELECT CASE WHEN Col_1 IS NULL THEN -1 ELSE Col_2 END AS C
FROM MyTable
Hi,
I have got a column which should multi languages data(Chinese,English etc).
Source for this data is Excel.
I have kept this column DataType as NVARCHAR but Chinese data is shown as 'Boxes'.But when i copy this and paste on Query pane i get proper data.
Is the first thing doable?
Hoe can i accomplish this?
Thnks
hi
i have over 200 tables with all same column and data type locate all over the server(20)different database. so i have table call Tname to stored all the link like (databasename.dbo.tablename) so my job will call the Tname table to use cursor to insert records. but the problem is there's one or more table's column name K datatype has been modify by someone else. so is it cause the job fail.
if there a way or SQL statment that i can use Table Tname to see which one is missing column name K? and is there a way i can print out all the datatype and len for all the table column k? please help thanks
Which the column name is the c.Documenttype
here is my T-sql code..
SELECT [Hourly]
,count(case when C.Documenttype=1 THEN '1' END) as EDI
,count(case when C.Documenttype=2 THEN '2' END) as SI
,count(case when C.Documenttype=1 THEN '1' END) + count(case when C.Documenttype=2 THEN '2' END) as GrandTotal
[Code] ....
I am working with a table that has a column which stores multiple data/values that are comma separated.
I need to be able to query that table and get those rows where the values in that column match a pre-defined search list.
I was thinking of somehow trying to take the search list and convert it to a table(temp or a cte) and then JOIN to the table.
however, since the column may contain multiple values, i would need to parse/separate that first. I am not sure how to parse and then join to a list (if that is even the best way to solve this) to only get the rows where the search column contains one or more of the items we're looking for.
Below is some sample data:
Declare @BaseTable table (PKCol int, Column2Search varchar(2000))
Insert into @BaseTable (PKCol, Column2Search)
Select 1001, 'apple,orange,grapefruit'
UNION ALL
Select 1002, 'grapefruit,coconut'
UNION ALL
[Code] ....
I have a multi-column report with a page header that spans the width of the report. Whenever I close the report and reopen it, the header is changed to the width of the column. This isn't a real big deal because I deploy it with the header across the whole page; but once in a blue moon I accidentally hit the F5 key (which I am used to using for refresh in other environments I work in) and the report gets redeployed with the messed up header. Is there anyway to stop RS from automatically adjusting the page header?
And is there anyway to disable the F5 key from deploying the reports. I do use it to build and run windows apps, and don't want to change that, but I don't want to deploy 80+ reports when I accidentially hit it.
Thanks.
I created an SSRS Multi-Column Report that sets the Column-Spacing to 0 inches.
However, when I export the report to PDF the columns are approxiametly .125 inches apart from one another.
I need the columns to butt up against each other as I want to print the contents on a perforated label.
Does anyone know why this happens or how to enforce the column spacing?
Thanks!