I have a table with a data cell which is printing top-to-down
1
2
3
4
5
6
7
8
I want it to print like
1 2 3 4 5 6 7
How to do this??
The cell is in a group detials sections. and I am using Reporting Services 2000 with VS.NET 2003
Thanks in Advance
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
I am trying to figure out a way to toggle the visibility of attribute data based on a parameter. Specifically, I have a report that has many columns that an end-user may not want to see, depending on what they are using the report for. I know you can toggle visibilities on individual columns easily enough, however I want the user to be able to select which fields (at the attribute level) they want visible on the report up in the parameters, via a multi-value prompt.
Is this possible with reporting services 2005?
Thanks.
Hi All,
I have a report parameter which i multivalue. I want to display the selected value in a text box. I have written the following code :
=Switch(Parameters!ServiceAttribute.Count = 1,Parameters!ServiceAttribute.Value(0),
Parameters!ServiceAttribute.Count = 2,(Parameters!ServiceAttribute.Value(0) & ", " & Parameters!ServiceAttribute.Value(1)))
Which suggests that if only one of the two multivalue parameter id is selected display the same (Parameters!ServiceAttribute.Value(0)).
This works fine when i select both the attributes but throws an exception "Index was outside the bounds of the array" when i select only one of the parameters. Can anyone help me with that?
Also i want this report parameter to allow null i.e. if a user does not select anything he should still be able to view the report.
In case of regular dropdowns i have added a <Null> value to the existing values and set the default to null. But in case of multi-value, it does not give an option of adding <Null>
I have a requirement where i have to display some data in the form of multi column but the main report should be in a standard one.I have tried by using sub report as multi column and used that in my main report but when i preview the report  it is considering it as a normal report.Do we have any feature in SSRS to have both multi & standard report layouts in one report.
View 4 Replies View Related I have a 2 coulmns report ,one group ,when I print the report,it does not paging correctly.For example,suppose every column can display 20 rows, if every group has 20-40 rows ,the print is ok,it can paging correctly,but if one group has 10 rows or more than 40 and less than 60,the two groups will print on one paper,how can I print the every group on different paper?
Any advice would be much appreciated.
Thanks.
Hi,
I have created a multi column report (2 columns), which is working fine. However, I need to have a chart on the same report, but it needs to be the width of the page, and not just the width of one column.
If I could put the chart in the report footer / header that would be perfect, but obviously I can't!
Has anyone else come across this, and any ideas / suggestions you have would be appreciated!
Cheers
Chris
I am trying to get a simple list to wrap and print in multiple columns on my report. I have indicated 3 multi-columns in the report properties and see the multiple columns in the layout, but I must need to do something else because the report is still printing in one column to multiple pages. This should all fit on 1 page if the list will wrap or snake as it says it the directions for using multi-column reports.
Any help would be appreciated. Thanks
I have a multi-column report with a page header that spans the width of the report. Whenever I close the report and reopen it, the header is changed to the width of the column. This isn't a real big deal because I deploy it with the header across the whole page; but once in a blue moon I accidentally hit the F5 key (which I am used to using for refresh in other environments I work in) and the report gets redeployed with the messed up header. Is there anyway to stop RS from automatically adjusting the page header?
And is there anyway to disable the F5 key from deploying the reports. I do use it to build and run windows apps, and don't want to change that, but I don't want to deploy 80+ reports when I accidentially hit it.
Thanks.
When I use the PageBreakAtEnd on the table or on a group in the table, all it does is create a new column of the column report.
I'd want it to start a new page, how can I do this ? Should I work around this issue using code ?
Background: What I need to achieve is a report with 2 columns where the list of products in category 1 are listed in the left column and then snake to the 2nd column on the same page, then to column 1 on page 2, column 2 on page 2, etc...
When it comes to category 2, it should start a fresh new page regardless of whether the previous product was rendered in column 1 or column 2.
I get the snaking to work using the "Columns" property of the report Body. However page breaks do not start a new page, they just start a new column.
Hi there...
I have a matrix report within a list so it functions as a report with dynamic columns.
Matrix a:
a b c d e
x 1 2 4 9 12 <NEED SUBTOTAL across Columns for row x>
y 6 2 4 5 9 <<NEED SUBTOTAL across Columns for row y>
TOTAL <need totals going down rows and need a grand total>
Remember the number of rows and columns are dynamic so I have NO CLUE how to add a column and display it if and only all the columns have been displayed ...sort of like a COLUMN and ROW footer for a matrix report.
Any help will be appreciated
thank you
Prashanth Prasanna
Hi out there
It seams that I have run into a know and apparently unsolved problem.
How do I force a page break, not column break, on a multi-column report?
I have 4 columns, my data is grouped and is setup to page break after each group.
But all I get is a column break, due to RS thinking of column's as pages.
Several people have posted about the same problem, but I can't find a solution. See...
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=884945&SiteID=17
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=226045&SiteID=17
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1654050&SiteID=1&pageid=0
http://www.themssforum.com/SVCS/Page-break-77428/
http://www.themssforum.com/SVCS/Createing-real/
http://www.bokebb.com/dev/english/2008/posts/2008116837.shtml
Does anyone know how to solve this ???
For my report I am trying to display images that are pulled from a database. Images are from separate records. I have the records I need in a dataset and now I want to set a Table Cell value to the field corresponding to the image. However, the next images/(records) are displayed on the next row (as expected i guess). How do I set the the records/values to be displayed across a single row?
What I have:
image1|
image2|
image3|
What i want:Â
image1|image2|image3|etc...
I am displaying the red line in the beginning of the current week column in the matrix table. But for few resources the red line is missing. For Example in below screenshot, refer the 'Adrian Larkin' resource. Here is the SSRS report border expression which is comparing the [TimeByDay] with the current Week First Monday Date to display the red bar -
=IIf(Fields!TimeByDay.Value = DATEADD("d", -(WeekDay(Today(),2))+1, Today()), "Red", "Black")"
Here is the dataset result set. If you refer the column [TimeByDay], it has no record for the date 11/05/2015 for the Adrian resource as he has no assignment for the date 11-05-2015.display the red missing line red bar using the expression or any other solution.
Hello.
I have a multi value parameter in my report.
I want to know how can I display all of the selected values in this parameter in a text box.
Whan I try to use this parameter in a textBox it automaticly take the value:
Parameter.param.Value(0) Whice take only the first select value.
Is there a simple way of doing it?
Thanks.
Hello,
I have the following problem.
i have a report where you need to fill in a few parameters
start date, end date and subject selection.
the subject selection is a multivalue paramter (select all, param1, param2, param3)
the multivalue parameter is based on another dataset with paramid as value field and paramdescription as value label.
in my report i want to display something like this :
from startdate to enddate
summary for campaign(s) : selected parameters.
in the selected parameters is can display a =join(Parameter!campaig.value) but this only returns the 32bit guid.
instead i would like it to display the parameterdescription label.
anybody has some ideas ?
greetings
vince
Here's tricky one.
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
Essentially, I want to create a for each loop.
Any ideas?
Hi All,
I have a question, How to user the Multi value in Visual Studio Report Designer.
My dataset contains the following
Select empno,empname,basicpay,deptcd from employee where deptcd in (substring(@gdept,1,4))
Here variable gdept is the report parameter. I am passing the value.
it works fine with single value.
( the source of gdept is a another dataset to list the deparment code+name,
Example
DEP1 - COMPUTER
DEP2 - ADMIN
DEP3 - FINANCE
)
when I preview, i have a combo box to select the department.
If I choose one deparment, it works fine.
If I choose more than one department or select all I have error message
"substring function requires 3 aruguments."
what is wrong is the query
Please advise.
Cheers,
Saleem
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report  are static. we are using SSRS 2008
View 6 Replies View Relatedhai iam new to ssrs, please help me.
i have student billbale information assume what ever data it. i need to to dispaly total amount for the student at
Bottom Of Report By Daily, Weekly, Monthly, SYTD . take any example, i want to know formula.
thanks to advanced
Jacks v
I am trying to exclude records from a table where the ID column is the same but the Mail code Column is multi-valued.For Example: (the table looks like....)
ID Mail_code
111111 XNT
111111 N11
111111 XNC
222222 XNC
222222 XNL
333333 XNC
So, if there is any ID that has a value of XNC, I want to exclude the ID all together from my output regardless of the other values.
I have two tables, one a data table, the other a product table. I want to perform a join on the two tables with values distributed into columns based on the value in the month field.
data_table
product_code month value
350 1 10
350 2 20
350 3 30
product_table
product_code profit_center
350 4520
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 20 30
My current query gives the following result
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 0 0
350 4520 0 20 0
350 4520 0 0 30
Any direction toward a solution would be appreciated. Am using SS2005.
Hi,Would like to know the performance differenece between Multi-columnIndex vs Single Column Indexes. Let's say I have a table with col1,col2, col3 along with a primary key column and non-indexed columns.In queries, I will use col1, col2, and col3 together and some timesjust one or two of these three columns. My questions is, should Icreate one index contains col1, col2, and col3, or create 3 seperatedcolumns. I.e. each column has its own index. Any performancedifference?Thanks a lot.
View 1 Replies View RelatedIn my report i would have 2 groups.
The first group should cause a real page break, the secound group should cause a column break.
Any idea on how to realize this, i've been playing with quite some settings but .....
So, any help ...
Is there a way to display a column alias as part of the result set column labels?
View 9 Replies View RelatedHI there.
I have been working on this for quite some time and I can not figure out what I am doing wrong.
I have a report filter called ItemFilter and I have declared as a report parameter where the multi value checkbox is checked. The values from this filter are coming from the item table.
SO the users drilldown on the filter when they run the report an select the Items that they would like to display info for. I had the following code before in the where
where
([CRONUS International Ltd_$Item].No_ = @itemfilter). This only worked if they selected on item from the list.
I want them to be able to select multiple Items or all. The code above did not work because there were commas separating one item from the other and I was getting an error.
I changed to
whrere
([CRONUS International Ltd_$Item].No_ IN (@itemfilter)).
Now this only returns the first item that I enter on my Itemfilter parameter.
Does anyone have any clue in regards to this ?? I am sure I am using the wrong syntax, but I do not know what to change it too.
Thanks
I currently have two different reports that I print and then combine together, with multiple records printed with both reports. This works ok but I'd like to combine them. I need to still have two pages print. Is there a way to combine these? The db is being used for an event where I need to get the pages printed quickly so if they can be combined it would sure help out.
Mark
Hello,
Is it possible to create a subscriptions for more than one report ? (I would like to pack in one e-mail three or four reports).
Thanks, Regards
Braulio
Hi all
Basically I had 2 paramater which ComputerName and MemberName.
The membername was set as Multi-Value as sets as follow:
Label: Value:
Exclude Domain Admins Domain Admins
Exclude Local Install Local Install
And the query is:
SELECT id,
ComputerName,
GroupName,
MemberName,
ScanDate
FROM GROUPMEMBERS WITH (NOLOCK)
WHERE ComputerCN LIKE '%' + @ComputerName + '%'
AND MemberName NOT IN (@MemberName)
ORDER BY ComputerName ASC
The prompt is like this:
Computer Name [ ] Excluded by [ ]
The issue is in the second prompt I have to select
"something" which is I don't want to. I want the user to have this parameter as an optional.
Any ideas?
Thanks
I have a parameterized main report that contains a link to a sub report with parameters. Then from the sub report I have a link that takes you back to main report. If I use multi value parameters or single value parameters the links going back and forth between the two reports works just dandy, when I run it on my PC. However when I deploy the reports to the Web Server, the link going from the sub report back to the main report only works if the parameters are single select. Going from the Main to the Sub it doesn€™t matter.
This is the error I get using multi select parameters going from the sub report back to the main.
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
Any suggestions?
I am trying to use a Multi-Value Report Parameter to determine Visibility, I found this to work great when I only had 2 values (0 or 1), but I have 5 now (0, 1, 2, 3, 4).
I can see what is happening, but I don't know how to write the Visibility Expression to get it to work for all conditions. I can clearly see that when more than one option is selected from the drop down box the Report Parameter goes from Parameters!ReportSelect.Value(0) to
Parameters!ReportSelect.Value(0)
Parameters!ReportSelect.Value(1)
Parameters!ReportSelect.Value(2)
Parameters!ReportSelect.Value(3)
Parameters!ReportSelect.Value(4)
one for each number of variables selected. I need to evaluate for all possible values and if any of them are the one selected I want it to be visable.
Currently I am using this expression on Visability:
=IIf(Parameters!ReportSelect.Value(0)= 1, FALSE, TRUE)
But this only works if the "=1" is the 1st one selected.
I need it to work for all 4 options, so that all selected will be visible.
Does this make sense?
I have 6 columns:
Column1a, Column1, Column2a, Column2, Column3a, Column3
I need a statement that will go through the whole table as follows:
For each row, if column3 is not null then return column3 as columnB and column3a as ColumnA.
If column3 is null then if column2 is not null then return column2 as columnB and column2a as columnA.
If column3 & column2 is null then return column1 as columnB and column1a as columnA.
Any ideas?
Thanks!
Hi there,
My 'where' clause contains the following...
startdate <= @Date AND enddate > @Date
Should I put one index on 'startDate' and another on 'endDate' or should I have one index that covers both columns?
I don't know what the difference would be.
Cheers, XF.