Multi-Value Parameter Width
Mar 27, 2007
Good afternoon,
I've designed a Reporting Services report that has a multi-value parameter. The report works just great. The only issue I'm running into is that the users are complaining that when they want to select the values, within the multi-value parameter box, they have to scroll it to the sides way too much. This also makes them select values by mistake.
Is there away to inscrease the width of the multi-value parameter box?
Best regards.
View 20 Replies
ADVERTISEMENT
Feb 25, 2008
Hi,
Has the inability to change the width of the multi-select drop down for parameters been fixed yet? Even if I could at least make it default to be wider would be great.
Thanks.
View 1 Replies
View Related
Feb 28, 2006
Hi,
May I know is there a way to control the size of the parameter drop down box? In my current box, the width increase according to the option with label of the longest length, in which causes my report's width to increase out of my control.
Thanks in advance!
View 15 Replies
View Related
Oct 25, 2007
Hi there,
May be a kind of dumb question, but I have a multi-value parameter that I would like to give users the ability to select from in a SSRS 2005 Report and I was wondering if there was a way to adjust the width of the drop down so the user wouldn't have to scroll horizontally to see a full parameter item. It looks like it cuts off after about 30 characters.
Any help here would be appreciated.
Thanks!
Rich
View 1 Replies
View Related
Sep 8, 2006
Does anyone know how to control the width of the parameter dropdownlist? If you select "Multi-value" for the parameter (non-sp1 version) the parameter list is in a dropdownlist that is manageable in size. If you do not use the multi-value parameter, it looks like the width of the dropdownlist is determined by the width of the longest text of the returned parameters.
Is there any way to control the width of the dropdown?
Thanks
Rob
View 5 Replies
View Related
Sep 8, 2007
My value is approx 50 characters wide, the parameter drop down is only displaying about 10 characters, although I have plenty of room on the screen.
Also, in a multi-parameter environment, are there any controls on where the parameters are being displayed?
thanks
View 2 Replies
View Related
Jul 29, 2015
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
View 2 Replies
View Related
Feb 4, 2008
I would like to be able to adjust the multi-value property of a parameter based on the value of another parameter in my report. The controlling paramter would be binary with two options for Single or Multiple selection. I would like my parameter to default to multi-value, which I can do on the screen selection. I have tried to add an IIF statement to the XML code, with no success. Any ideas would be helpful.
Thanks
View 4 Replies
View Related
Oct 30, 2007
Hello,
I have a report where I'm showing a list of users to select.
When previewing the report, the width of the field is automatically set to the largest label in the dropdown list.
But when I change the parameter to have "Multi-Values", then the width is set to a fixed value and a horizontal scrollbar appears.
Does anyone know how to have a "Multi-Values" parameter, but keeping the lasgest width of the labels in the dropdown list ?
Thanks in advance
View 3 Replies
View Related
Dec 6, 2013
I have like 100 columns and most of them work fine, but some will not work. I need to select the columns with correct width for fixed width flat file.
Here is typical SQL statment that works for most of them.
left(RTRIM(A.City) + Replicate(' ', 25) ,25) as [City]
The above one is not working, but many other works fine like the address. Why would it work for some, but not others?
It works fine if I use any char, but not space. i.e.
left(RTRIM(A.City) + Replicate('*', 25) ,25) as [City]
View 5 Replies
View Related
Mar 4, 2008
I have a subreport on my main report, and the subreport contains a matrix. When I run the report, the subreport seems to expand beyond the width of the main report. The matrix itself does not expand beyond the width of the body of the main report, but for some reason it seems that the subreport does. The subreport does not contain any headers that might be messing up the width. If I cut and paste the matrix from the subreport directly onto the main report, and remove the subreport, it prints fine. But as soon as I include the subreport on the main report it prints with blank pages because the subreport expands beyond the width of the body of the main report. I have checked the width and margins on the subreport and compared to the width of the main report and all looks good. Can anyone help?
Thanks.
View 7 Replies
View Related
Jun 1, 2007
Is there a maximum width for fixed width column?
I'm trying to read in a flat file (which, admittedly, has one very wide column), and it keeps breaking because of truncation when it tries to read in the file.
Any ideas?
Jim Work
View 5 Replies
View Related
Apr 9, 2007
Hi,
I've a report projects where each report has a number of columns and the spec is to have all the columns print-out on the same page. Is there a setting that will auto-scale these columns to fit to the page or will I have to edit the font size and widths manually on each report to fit to the page?
Thanks for any comments.
View 4 Replies
View Related
Jan 16, 2007
Hi,
In my report i have a multi valued parameter, when i view my report in the Web application with Report Viewer, The multi valued parameter is displaying in light color.Can we able to change this.
Thanks in advance
View 2 Replies
View Related
Sep 5, 2007
I have a stored procedure im passing into Reporting Services. Only problem is , What do i need to change to allow the user to select more then one value. I already know what to do on the reporting services side, but it keeps erroring with the data source IE my stored procedure. Here's the code:
Code Snippet
SE [RC_STAT]
GO
/****** Object: StoredProcedure [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY] Script Date: 09/05/2007 13:49:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY]
(@Region int = Null)
AS
BEGIN
SELECT Budget_Reporting_Detail.Budget_Report_Detail_Datetime, Budget_Reporting_Detail.Budget_Report_Detail_Document_Type,
Budget_Reporting_Detail.Budget_Report_Detail_Code, Budget_Reporting_Detail.Budget_Report_Detail_Description,
ISNULL(Budget_Reporting_Detail.Budget_Report_Detail_Amount, 0) AS Actual, Budget_Reporting_Detail.Budget_Report_Detail_Qty,
Budget_Reporting_Detail.Budget_Report_Detail_Responsible, Territory.Name+'('+Code+')' as [Name], Region.Region, Round((Forecast.Budget_Amount/13),2) AS Budget,
Forecast.Budget_Type_Code, Forecast.Budget_Year, Budget_Forecast_Period,
Forecast.SalesPerson_Purchaser_Code
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting_Detail AS Budget_Reporting_Detail RIGHT OUTER JOIN
RC_DWDB_INSTANCE_1.dbo.Region AS Region RIGHT OUTER JOIN
(SELECT Budget_Type_Code, Budget_Year, SalesPerson_Purchaser_Code, Budget_Amount
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget
) AS Forecast INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Territory AS Territory INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Sales_Responsible AS Territory_In_Sales_Responsible ON
Territory.Code = Territory_In_Sales_Responsible.Territory_Code INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Region AS Territory_In_Region ON Territory_In_Region.Territory_Code = Territory.Code ON
Forecast.SalesPerson_Purchaser_Code = Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code ON
Region.Region_Key = Territory_In_Region.Region_Key ON Budget_Reporting_Detail.Budget_Type_Code = Forecast.Budget_Type_Code AND
Budget_Reporting_Detail.Budget_Year = Forecast.Budget_Year AND
Budget_Reporting_Detail.SalesPerson_Purchaser_Code = Forecast.SalesPerson_Purchaser_Code
WHERE (Region.Region_Key IN( @Region)) AND (Forecast.Budget_Year = 2007)
END
what am i doing wrong?
View 1 Replies
View Related
Jan 15, 2008
Hi:
I am building a report and have a few parameters. One of this parameters is set up as Multi-Value. When I only select one value everything is running fine. But when I select multi values I get an error saying I must declare my variable.
Any idea why this is happening?
Ben
View 3 Replies
View Related
Sep 3, 2007
hi,
i read from this forum that to pass array to report is using multi value parameter . my problem now is
1. can i pass multi dimension array.
2. how do i show the multi value parameter in a table . for example i have a multi value parameter that may contain 10 or 20 array . how do i dynamic it show in table.
rgds,
charles
View 1 Replies
View Related
Dec 11, 2006
I'm trying to build a sproc that will return rows even if some of the parameters are blank. For example; if a user does not enter a priority, a status, or a caller the sproce should still return rows based on the other parameters.
Can anyone help me find a way to modify my sproc bellow to allow this? I think the way I have it bellow will only return those rows where the user has entered a parameter or the record has a null in the field.ALTER PROCEDURE dbo.ContactManagementAction
(
@ClientID int,
@Priority int,
@TStart datetime,
@TEnd datetime,
@Status nvarchar,
@ConTypeID int,
@Caller nvarchar,
@Keyword nvarchar
)
AS
SELECT Task_ID, ClientID, Priority, ActionDate, Subject, Note, Status, CompletionDate, TaskDocument, ReminderDate, Reminder, ReminderTime, Sol_ID,
DateEntered, EnteredBy, Caller, ContactTypeID, DueDate
FROM tblTasks
WHERE (ClientID = @ClientID) AND (Priority = @Priority) OR (Priority IS NULL) AND (ActionDate BETWEEN @TStart AND @TEnd) AND (Status = @Status) OR (Status IS NULL) AND
(ContactTypeID = @ConTypeID) OR (ContactTypeID IS NULL) AND (Caller = @Caller) OR (Caller IS NULL) AND (Subject LIKE @Keyword) OR (Subject IS NULL)
RETURN
View 15 Replies
View Related
May 27, 2008
Is it possible for an AND statement to take mulitple parameters? See below code:
SELECT tblQuestion.Question, tblAnswer.Answer
FROM (tblAnswer INNER JOIN tblQuestion ON tblAnswer.QuestionID = tblQuestion.ID)
WHERE (tblAnswer.StateID = ?) AND (tblAnswer.QuestionID = 14)
Is something like this possible?:
AND (tblAnswer.QuestionID = 14, 26)
Thanks
View 2 Replies
View Related
Jun 23, 2007
OK Guys....
If you answer this one, you will save my life...and you WILL be the MAN or WOMAN!!!!
Problem: I have a set of 24 matrix's that need to calculate the difference between the last two years and display in a field to the right of the last rendered column. Since I have been struggling with this, let's just assume there is no better way than how I currently have it set up. (one table that does the calculations for me and I set one field on the report to display the most recent two columns difference in my report)
what I can not figure out is: when I choose one of my parameters the report displays the information I want...but when I choose more than one...well there is the problem....
In order to obtain the most help for myself I will ask this in the most general way possible so as not to get bogged down into my specific solution...
Desired Result: How to pass all my parameter values from my multi-value parameter during runtime to a SQL Stored proc from my dataset within Reporting Services at runtime, Match the parameter to the field, get the result and store it in a variable, then do it again and add the second to the first within the variable, and so on and so on , until all of the parameters are used. Then sum the values and display in a field.
HELP, HELP, HELP Please....
View 3 Replies
View Related
Jun 28, 2007
Hello,
I have a multi-value parameter field and each item comes from a table in the DB.
This multi-value parameter allows to select all or some of the items.
What if I don't want to select ANY item??
I read in the forum the several tray to do the same but the answers are not so clear..
If I say that at the end is a bug in SSRS... AM I right?
Thank you
Marina B.
View 1 Replies
View Related
Apr 24, 2007
Several people have asked about this, but I have not seen a response that works. I have several parameters that I want to use as filters. If a particular filter parameter is not entered, the report should not apply a filter on that criterion. It works fine to create a single value parameter which allows null, and use the following in SQL:
WHERE ( [Field1] = @Field1_Filter OR @Field1_Filter IS NULL )
How can the same effect be achieved for a multi-value parameter? If you try to create a multi-value parameter which allows null, the report builder gives an error. I can't use "allow blank value" because some of my parameters are integer parameters. Without the allow null, the report generator requires me to enter at least one value. So I don't know how you can get a value of "not entered" into a multi-value parameter.
I also don't know how you would check for the "not entered". Someone suggested the following SQL:
WHERE ( [Field1] IN (@Field1_Filter) OR @Field1_Filter IS NULL )
This generates an error when generating the report if multiple values are entered for the parameter (the normal condition). The error is " An expression of non-boolean type specified in a context where a condition is expected, near ',' ".
How is this supposed to be done?
Thanks for any insight
View 12 Replies
View Related
Mar 19, 2007
hi,
i'm trying to perform a query against a db2 database like this:
SELECT ... FROM ... WHERE (field IN (?))
Then i let reporting services pass the parameter to the report. When i try to preview the report, i get the following error:
An error occurred during local report processing,
An error has occured during report processing,
Cannot add multi value query parameter '?' for data set ... because it is not supported by the data extension
But when i type the query like this
SELECT ... FROM ... WHERE (field IN ('value1','value2'))
it executes flawlessly.
I am using the IBM ole db driver for db2 if that matters
Can anyone help me?
View 5 Replies
View Related
Feb 1, 2007
HI there.
I have been working on this for quite some time and I can not figure out what I am doing wrong.
I have a report filter called ItemFilter and I have declared as a report parameter where the multi value checkbox is checked. The values from this filter are coming from the item table.
SO the users drilldown on the filter when they run the report an select the Items that they would like to display info for. I had the following code before in the where
where
([CRONUS International Ltd_$Item].No_ = @itemfilter). This only worked if they selected on item from the list.
I want them to be able to select multiple Items or all. The code above did not work because there were commas separating one item from the other and I was getting an error.
I changed to
whrere
([CRONUS International Ltd_$Item].No_ IN (@itemfilter)).
Now this only returns the first item that I enter on my Itemfilter parameter.
Does anyone have any clue in regards to this ?? I am sure I am using the wrong syntax, but I do not know what to change it too.
Thanks
View 1 Replies
View Related
Jul 6, 2007
I am experiencing a problem with the multi-value parameter dropdown in the ReportViewer when using FireFox, but in IE it seems to work fine. The symptom is when I click on the dropdown the list of options appears and then quickly disappears before I can select anything and I only experience the problem with multi-value parameters. I also have noticed that the dropdown is grayed out but I can still click it. Also, the position of the dropdown options are different in FireFox (pushed all the way to the left). I have created a very basic example at https://www.register4this.com/testreport.aspx to demonstrate the problem. There is no report, only the single "Orgs" parameter to keep things as simple as possible.
I suspect that I am missing something obvious because I haven't been able to find anyone else reporting this issue so any help would be appreciated. My ReportView control is configured as follows:
Code Snippet
<rsweb:ReportViewer ID="ReportViewer1" runat="server" AsyncRendering="False" Font-Names="Verdana" Font-Size="8pt" Height="400px" ProcessingMode="Remote" Width="400px">
<ServerReport ReportPath="/REG_Report/testreport" ReportServerUrl="http://reports.register4this.com/reportserver" />
</< FONT>rsweb:ReportViewer>
The report code is as follows:
Code Snippet
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="Members">
<DataSourceReference>Members</DataSourceReference>
<rd:DataSourceID>54f7f4de-9fe5-44e9-bcf0-467d024725cb</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>1in</BottomMargin>
<RightMargin>1in</RightMargin>
<ReportParameters>
<ReportParameter Name="Organizations2">
<DataType>String</DataType>
<Prompt>Orgs:</Prompt>
<ValidValues>
<DataSetReference>
<DataSetName>Organizations</DataSetName>
<ValueField>orgID</ValueField>
<LabelField>orgName</LabelField>
</DataSetReference>
</ValidValues>
<MultiValue>true</MultiValue>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<Height>2in</Height>
</Body>
<rd:ReportID>504c91c0-4beb-421e-bae0-4d581303b3e2</rd:ReportID>
<LeftMargin>1in</LeftMargin>
<DataSets>
<DataSet Name="Organizations">
<Query>
<CommandType>StoredProcedure</CommandType>
<CommandText>REG_spGetOrganizations_org</CommandText>
<QueryParameters>
<QueryParameter Name="@orgID">
<Value>=System.DBNull.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>Members</DataSourceName>
</Query>
<Fields>
<Field Name="orgID">
<rd:TypeName>System.Int32</rd:TypeName>
<DataField>orgID</DataField>
</Field>
<Field Name="orgName">
<rd:TypeName>System.String</rd:TypeName>
<DataField>orgName</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Width>6.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<TopMargin>1in</TopMargin>
</Report>
Any help wpuld be greatly appreciated.
View 10 Replies
View Related
Jun 1, 2007
Hi All,
Is it possible to pass a multi value parameter from one report to another using the "jump to report" feature?
ie;
I have report A that has a mutli value parameter (para1). This report has a link with the action property set to jump to another report(Report B). Report B requires the same multivalue parameter. I have tries setting the parameter in the interface as well as trying the join function. Nothing seems to pass the values correctly.
regards
View 3 Replies
View Related
Jul 29, 2005
I have a multi-value parameter and I need to print its value in report.
View 4 Replies
View Related
Mar 21, 2008
I have a report with the following dataset query:
Code Snippet
SELECT ...,
dbo.getActivitySinceBeginningYear(..., @countryId ,...) AS HoursYear
FROM ....
WHERE cast(detail.COUNTRY_ID as nvarchar(max)) IN (@countryId)
AND ...
GROUP BY ...
countryId is defined as a String multi-valued parameter.
The getActivitySinceBeginningYear is defined as follows:
Code Snippet
ALTER FUNCTION dbo.getActivitySinceBeginningYear
(
...
@countryId ntext,
...
)
RETURNS decimal(18,5)
AS
BEGIN
declare @return decimal(18,5)
set @return = 0.0
SELECT @return = SUM(detail.HOURS_WORKED)
FROM ...
inner join charlist_to_table(@countryId, Default) f on detail.COUNTRY_ID = f.str
WHERE ...
RETURN @return
END
This function works as expected if I transmit one ID or several.
The report works fine if I check only one ID.
If I check several IDs, the report displays this error:
Procedure or function dbo.getActivitySinceBeginningYear has too many arguments specified.
Why???
My second problem is with the Where clause:
Code Snippet
WHERE cast(detail.COUNTRY_ID as nvarchar(max)) IN (@countryId)
If I do:
Code SnippetWHERE detail.COUNTRY_ID IN (@countryId)
I have the following error:
Conversion failed when converting the nvarchar value '3,5' to data type int.
(I transmitted 3 and 5 for countryId)
That's why I tried to use a cast, but the data returned by the query is wrong when I transmit several value.
??
View 7 Replies
View Related
Jul 11, 2007
I am trying to create a report with a multi value integer parameter. I have tried
="SELECT * FROM vProjectRequestStatus WHERE ProjectRequestStatusCode IN (" + Parameters!StatusCode.Value + ")"
I get an error stating
An error occurred during local report processing.
An error has occurred during report processing.
Cannot set the command text for data set 'ProjectRequestStatus'.
Error during processing of the CommandText expression of dataset 'ProjectRequestStatus'.
Has anybody worked with integers?
Thanks,
Fred
View 8 Replies
View Related
Feb 13, 2007
Hi,
I am trying to create a program that transfers tables to flat files.
At this point in time, I have suceeded in created one that creates delimited files.
However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.
Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.
I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.
View 5 Replies
View Related
Aug 29, 2007
Hello
I created a table adapter with the following query
select * from building where buildingname in (@param1)
I used the query builder to the test the query and it works ok if I pass a single value
ex: name: @param1 value: Building1
but when I use the value: Building1, Building2 then it doesn't return anything
If i do a direct sql: select * from building where buildingname in ('Buiding1','Buiding2') returns many rows.
Now I have a class that has the following function<System.ComponentModel.DataObjectMethodAttribute(ComponentModel.DataObjectMethodType.Select, False)> _
Public Function getBuilding(ByVal building As String) As myDataSet.buildingDataTableReturn adapter.getBuilding(building)
End Function
When I call this function I try to pass the building value sorta like
dim building as string = 'Building1,Building2'
and it doesn't work. I tried a whole bunch of variations.
How are you supposed to format the parameter string?
Thanks
Peter
View 4 Replies
View Related
Mar 6, 2007
Hello.
I have a multi value parameter in my report.
I want to know how can I display all of the selected values in this parameter in a text box.
Whan I try to use this parameter in a textBox it automaticly take the value:
Parameter.param.Value(0) Whice take only the first select value.
Is there a simple way of doing it?
Thanks.
View 1 Replies
View Related
Sep 21, 2007
Hi all
Basically I had 2 paramater which ComputerName and MemberName.
The membername was set as Multi-Value as sets as follow:
Label: Value:
Exclude Domain Admins Domain Admins
Exclude Local Install Local Install
And the query is:
SELECT id,
ComputerName,
GroupName,
MemberName,
ScanDate
FROM GROUPMEMBERS WITH (NOLOCK)
WHERE ComputerCN LIKE '%' + @ComputerName + '%'
AND MemberName NOT IN (@MemberName)
ORDER BY ComputerName ASC
The prompt is like this:
Computer Name [ ] Excluded by [ ]
The issue is in the second prompt I have to select
"something" which is I don't want to. I want the user to have this parameter as an optional.
Any ideas?
Thanks
View 2 Replies
View Related
