Multi Value Report Parameter
Feb 1, 2007
HI there.
I have been working on this for quite some time and I can not figure out what I am doing wrong.
I have a report filter called ItemFilter and I have declared as a report parameter where the multi value checkbox is checked. The values from this filter are coming from the item table.
SO the users drilldown on the filter when they run the report an select the Items that they would like to display info for. I had the following code before in the where
where
([CRONUS International Ltd_$Item].No_ = @itemfilter). This only worked if they selected on item from the list.
I want them to be able to select multiple Items or all. The code above did not work because there were commas separating one item from the other and I was getting an error.
I changed to
whrere
([CRONUS International Ltd_$Item].No_ IN (@itemfilter)).
Now this only returns the first item that I enter on my Itemfilter parameter.
Does anyone have any clue in regards to this ?? I am sure I am using the wrong syntax, but I do not know what to change it too.
Thanks
View 1 Replies
ADVERTISEMENT
Aug 20, 2007
Here's tricky one.
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
Essentially, I want to create a for each loop.
Any ideas?
View 4 Replies
View Related
Aug 14, 2006
Hi All,
I have a question, How to user the Multi value in Visual Studio Report Designer.
My dataset contains the following
Select empno,empname,basicpay,deptcd from employee where deptcd in (substring(@gdept,1,4))
Here variable gdept is the report parameter. I am passing the value.
it works fine with single value.
( the source of gdept is a another dataset to list the deparment code+name,
Example
DEP1 - COMPUTER
DEP2 - ADMIN
DEP3 - FINANCE
)
when I preview, i have a combo box to select the department.
If I choose one deparment, it works fine.
If I choose more than one department or select all I have error message
"substring function requires 3 aruguments."
what is wrong is the query
Please advise.
Cheers,
Saleem
View 1 Replies
View Related
Sep 21, 2007
Hi all
Basically I had 2 paramater which ComputerName and MemberName.
The membername was set as Multi-Value as sets as follow:
Label: Value:
Exclude Domain Admins Domain Admins
Exclude Local Install Local Install
And the query is:
SELECT id,
ComputerName,
GroupName,
MemberName,
ScanDate
FROM GROUPMEMBERS WITH (NOLOCK)
WHERE ComputerCN LIKE '%' + @ComputerName + '%'
AND MemberName NOT IN (@MemberName)
ORDER BY ComputerName ASC
The prompt is like this:
Computer Name [ ] Excluded by [ ]
The issue is in the second prompt I have to select
"something" which is I don't want to. I want the user to have this parameter as an optional.
Any ideas?
Thanks
View 2 Replies
View Related
Apr 1, 2008
I know this is the code to add a single valued report parameter to a report via asp.net
Dim paramList As New Generic.List(Of ReportParameter)
paramList.Add(New ReportParameter("MyParameter", "MyValue", False))
Me.ReportViewer1.ServerReport.SetParameters(paramList)
But how do I go about adding a multi valued parameter?
View 8 Replies
View Related
Feb 19, 2008
I am trying to figure out a way to toggle the visibility of attribute data based on a parameter. Specifically, I have a report that has many columns that an end-user may not want to see, depending on what they are using the report for. I know you can toggle visibilities on individual columns easily enough, however I want the user to be able to select which fields (at the attribute level) they want visible on the report up in the parameters, via a multi-value prompt.
Is this possible with reporting services 2005?
Thanks.
View 9 Replies
View Related
Mar 19, 2008
Hi All,
I have a report parameter which i multivalue. I want to display the selected value in a text box. I have written the following code :
=Switch(Parameters!ServiceAttribute.Count = 1,Parameters!ServiceAttribute.Value(0),
Parameters!ServiceAttribute.Count = 2,(Parameters!ServiceAttribute.Value(0) & ", " & Parameters!ServiceAttribute.Value(1)))
Which suggests that if only one of the two multivalue parameter id is selected display the same (Parameters!ServiceAttribute.Value(0)).
This works fine when i select both the attributes but throws an exception "Index was outside the bounds of the array" when i select only one of the parameters. Can anyone help me with that?
Also i want this report parameter to allow null i.e. if a user does not select anything he should still be able to view the report.
In case of regular dropdowns i have added a <Null> value to the existing values and set the default to null. But in case of multi-value, it does not give an option of adding <Null>
View 5 Replies
View Related
Nov 30, 2007
I need to use a non-queried report parameter to filter a dataset for a report.
The dataset column I'm filtering is numeric. The dataset is not a sproc, it's a table in SQL Server that I am querying.
The Non-queried parameter values (Multi-value) are 1, 2, 3, 4, 5, >=6.
Selecting the >=6 throws the error: "Error converting data type nvarchar to numeric."
Which sucks.
Because...when I go straight into my dataset I can filter my numeric column with the exact same values (=1 or =3 or >=6) and everything works fine. The error is only raised when I use the @Parameter in the dataset.
I've tried eveything, researched everywhere online and I can't find any guidance anywhere.
View 10 Replies
View Related
Jul 2, 2015
I'm building a report and I want to have a parameter that has multiple integer values (not text).I can get it to work just fine if I create a value for each and every numeric value, but I want the user to only see two choices in the dropdown menu (plus the "Select All" that gets automatically created when I tick the box for "Allow multiple values"). How can I make this work?
For example, for my TYPE parameter I'd like something like this:
Label: Tigers
Value: 2
Label: Lions Bears Oh My
Value: 1,3,4,5,6
But I can't seem to set a multiple Value for an integer. And I can't seem to wrap the value with quotes and use Text as the Data Type because it says an error occured during processing (I assume because the field I'm going against is of the Integer format).My query would look something like this (the real one is a lot more complex):
SELECT
v_R_System.Netbios_Name0
,v_GS_COMPUTER_SYSTEM_EXT.PCSystemType0
FROM
v_R_System
INNER JOIN v_GS_COMPUTER_SYSTEM_EXT
ON v_R_System.ResourceID = v_GS_COMPUTER_SYSTEM_EXT.ResourceID
WHERE
v_GS_COMPUTER_SYSTEM_EXT.PCSystemType0 IN (@TYPE)
I've tried different Expressions, filters, options, syntax, and what-not, but I think I'm missing something basic.
View 2 Replies
View Related
Sep 28, 2007
Hi All
New user here. I've got a report with a couple of multi-value parameters and I'm displaying the selected values on the report using = Join(Parameters!ReportingGroup.Value, ", "). This works properly.
The users now want the report to display "All" if "Select All" is chosen, rather than showing the whole list.
Can anybody help me with this? I'm thinking of using an IIF statement in my expression, but have no idea how to define the condition?
Thanks in advance
Grant
View 3 Replies
View Related
May 2, 2008
Hi All,
I'm having trouoble with changing my report name when I swtich to different parameter values.
I use the following expression.
IIf(Parameters!GroupVar1.Label = "CBank", "CBank", IIf(Parameters!GroupVar1.Value ="DTC","DTC","Total"))
This works fine when I clear Mutli-Value box in paramter properties. but when I use multi-value, this does not work.
Is there any solution for this?
Thanks
View 1 Replies
View Related
Jan 22, 2007
Hi All,
Is there is any way to display the User selected parameter information if the parameter is multiselect ?
I was able to display if the parameter is single valued but if it is multivalued (list), i was not able to .
Any help is greatly appreciated.
Regards,
View 8 Replies
View Related
Dec 19, 2007
Hi All,
I'm unable to run the report the report with multi-valued parameter using the below StoredProcedure as dataset:
CREATE PROCEDURE spprodsales
@productid int
AS
select SalesOrderID,OrderQty,UnitPrice,ProductID
FROM Sales.SalesOrderDetail
Where ProductID IN (@productid)
RETURN
And when I'm replacing this dataset to a query as below I'm able to run the report with multiple values selected for productid parameter :
select SalesOrderID,OrderQty,UnitPrice,ProductID
FROM Sales.SalesOrderDetail
Where ProductID IN (@productid)
So, can anyone please help me out possibly using the same stored procedure as above.
Thanks,
Kripa
View 5 Replies
View Related
Apr 14, 2008
I understand that Multi-Select Parameters are converted behind the scenes to an In Clause when a report is executed. The problem that I have is that my multi-select string parameter is turned into an in claused filled with nvarchar/unicode expressions like:
Where columnName in (N'Value1', N'Value2', N'Value3'...)
This nvarchar / unicode expression takes what is already a fairly slow-performing construct and just drives it into the ground. When I capture my query with Profiler (so I can see the In Clause that is being built), I can run it in Management Studio and see the execution plan. Using N'Values' instead of just 'Value1', 'Value2','Value3' causes the query performance to drop from 40 seconds to two minutes and 40 seconds. It's horrible. How can I make it stop!!!?
Is there any way to force the query-rewriting process in Reporting Services to just use plain-old, varchar text values instead of forcing each value in the list to be converted on the fly to an Nvarchar value like this? The column from which I am pulling values for the parameter and the column that I am filtering are both just plain varchar.
Thanks,
TC
View 3 Replies
View Related
Jul 7, 2015
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
View 3 Replies
View Related
Apr 11, 2008
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
View 1 Replies
View Related
Jul 29, 2015
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
View 2 Replies
View Related
Feb 4, 2008
I would like to be able to adjust the multi-value property of a parameter based on the value of another parameter in my report. The controlling paramter would be binary with two options for Single or Multiple selection. I would like my parameter to default to multi-value, which I can do on the screen selection. I have tried to add an IIF statement to the XML code, with no success. Any ideas would be helpful.
Thanks
View 4 Replies
View Related
Apr 21, 2008
Is it possible to include a text/string as suffix(append to the end of textbox) to an report parameter prompt string ? Something like this
Enter Date: [ Textbox ] format:mm/dd/yyyy
Enter Age:[Textbox ] e.g 50
I need to include text like the one that I have highlighted in blue. Could someone help me out?
View 7 Replies
View Related
Jan 9, 2007
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
View 1 Replies
View Related
Nov 5, 2007
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
View 1 Replies
View Related
Jun 10, 2015
I have a requirement where i have to display some data in the form of multi column but the main report should be in a standard one.I have tried by using sub report as multi column and used that in my main report but when i preview the report it is considering it as a normal report.Do we have any feature in SSRS to have both multi & standard report layouts in one report.
View 4 Replies
View Related
Jan 16, 2007
Hi,
In my report i have a multi valued parameter, when i view my report in the Web application with Report Viewer, The multi valued parameter is displaying in light color.Can we able to change this.
Thanks in advance
View 2 Replies
View Related
Sep 5, 2007
I have a stored procedure im passing into Reporting Services. Only problem is , What do i need to change to allow the user to select more then one value. I already know what to do on the reporting services side, but it keeps erroring with the data source IE my stored procedure. Here's the code:
Code Snippet
SE [RC_STAT]
GO
/****** Object: StoredProcedure [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY] Script Date: 09/05/2007 13:49:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY]
(@Region int = Null)
AS
BEGIN
SELECT Budget_Reporting_Detail.Budget_Report_Detail_Datetime, Budget_Reporting_Detail.Budget_Report_Detail_Document_Type,
Budget_Reporting_Detail.Budget_Report_Detail_Code, Budget_Reporting_Detail.Budget_Report_Detail_Description,
ISNULL(Budget_Reporting_Detail.Budget_Report_Detail_Amount, 0) AS Actual, Budget_Reporting_Detail.Budget_Report_Detail_Qty,
Budget_Reporting_Detail.Budget_Report_Detail_Responsible, Territory.Name+'('+Code+')' as [Name], Region.Region, Round((Forecast.Budget_Amount/13),2) AS Budget,
Forecast.Budget_Type_Code, Forecast.Budget_Year, Budget_Forecast_Period,
Forecast.SalesPerson_Purchaser_Code
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting_Detail AS Budget_Reporting_Detail RIGHT OUTER JOIN
RC_DWDB_INSTANCE_1.dbo.Region AS Region RIGHT OUTER JOIN
(SELECT Budget_Type_Code, Budget_Year, SalesPerson_Purchaser_Code, Budget_Amount
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget
) AS Forecast INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Territory AS Territory INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Sales_Responsible AS Territory_In_Sales_Responsible ON
Territory.Code = Territory_In_Sales_Responsible.Territory_Code INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Region AS Territory_In_Region ON Territory_In_Region.Territory_Code = Territory.Code ON
Forecast.SalesPerson_Purchaser_Code = Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code ON
Region.Region_Key = Territory_In_Region.Region_Key ON Budget_Reporting_Detail.Budget_Type_Code = Forecast.Budget_Type_Code AND
Budget_Reporting_Detail.Budget_Year = Forecast.Budget_Year AND
Budget_Reporting_Detail.SalesPerson_Purchaser_Code = Forecast.SalesPerson_Purchaser_Code
WHERE (Region.Region_Key IN( @Region)) AND (Forecast.Budget_Year = 2007)
END
what am i doing wrong?
View 1 Replies
View Related
Jan 15, 2008
Hi:
I am building a report and have a few parameters. One of this parameters is set up as Multi-Value. When I only select one value everything is running fine. But when I select multi values I get an error saying I must declare my variable.
Any idea why this is happening?
Ben
View 3 Replies
View Related
Sep 3, 2007
hi,
i read from this forum that to pass array to report is using multi value parameter . my problem now is
1. can i pass multi dimension array.
2. how do i show the multi value parameter in a table . for example i have a multi value parameter that may contain 10 or 20 array . how do i dynamic it show in table.
rgds,
charles
View 1 Replies
View Related
Dec 11, 2006
I'm trying to build a sproc that will return rows even if some of the parameters are blank. For example; if a user does not enter a priority, a status, or a caller the sproce should still return rows based on the other parameters.
Can anyone help me find a way to modify my sproc bellow to allow this? I think the way I have it bellow will only return those rows where the user has entered a parameter or the record has a null in the field.ALTER PROCEDURE dbo.ContactManagementAction
(
@ClientID int,
@Priority int,
@TStart datetime,
@TEnd datetime,
@Status nvarchar,
@ConTypeID int,
@Caller nvarchar,
@Keyword nvarchar
)
AS
SELECT Task_ID, ClientID, Priority, ActionDate, Subject, Note, Status, CompletionDate, TaskDocument, ReminderDate, Reminder, ReminderTime, Sol_ID,
DateEntered, EnteredBy, Caller, ContactTypeID, DueDate
FROM tblTasks
WHERE (ClientID = @ClientID) AND (Priority = @Priority) OR (Priority IS NULL) AND (ActionDate BETWEEN @TStart AND @TEnd) AND (Status = @Status) OR (Status IS NULL) AND
(ContactTypeID = @ConTypeID) OR (ContactTypeID IS NULL) AND (Caller = @Caller) OR (Caller IS NULL) AND (Subject LIKE @Keyword) OR (Subject IS NULL)
RETURN
View 15 Replies
View Related
May 27, 2008
Is it possible for an AND statement to take mulitple parameters? See below code:
SELECT tblQuestion.Question, tblAnswer.Answer
FROM (tblAnswer INNER JOIN tblQuestion ON tblAnswer.QuestionID = tblQuestion.ID)
WHERE (tblAnswer.StateID = ?) AND (tblAnswer.QuestionID = 14)
Is something like this possible?:
AND (tblAnswer.QuestionID = 14, 26)
Thanks
View 2 Replies
View Related
Jun 23, 2007
OK Guys....
If you answer this one, you will save my life...and you WILL be the MAN or WOMAN!!!!
Problem: I have a set of 24 matrix's that need to calculate the difference between the last two years and display in a field to the right of the last rendered column. Since I have been struggling with this, let's just assume there is no better way than how I currently have it set up. (one table that does the calculations for me and I set one field on the report to display the most recent two columns difference in my report)
what I can not figure out is: when I choose one of my parameters the report displays the information I want...but when I choose more than one...well there is the problem....
In order to obtain the most help for myself I will ask this in the most general way possible so as not to get bogged down into my specific solution...
Desired Result: How to pass all my parameter values from my multi-value parameter during runtime to a SQL Stored proc from my dataset within Reporting Services at runtime, Match the parameter to the field, get the result and store it in a variable, then do it again and add the second to the first within the variable, and so on and so on , until all of the parameters are used. Then sum the values and display in a field.
HELP, HELP, HELP Please....
View 3 Replies
View Related
Jun 28, 2007
Hello,
I have a multi-value parameter field and each item comes from a table in the DB.
This multi-value parameter allows to select all or some of the items.
What if I don't want to select ANY item??
I read in the forum the several tray to do the same but the answers are not so clear..
If I say that at the end is a bug in SSRS... AM I right?
Thank you
Marina B.
View 1 Replies
View Related
Apr 24, 2007
Several people have asked about this, but I have not seen a response that works. I have several parameters that I want to use as filters. If a particular filter parameter is not entered, the report should not apply a filter on that criterion. It works fine to create a single value parameter which allows null, and use the following in SQL:
WHERE ( [Field1] = @Field1_Filter OR @Field1_Filter IS NULL )
How can the same effect be achieved for a multi-value parameter? If you try to create a multi-value parameter which allows null, the report builder gives an error. I can't use "allow blank value" because some of my parameters are integer parameters. Without the allow null, the report generator requires me to enter at least one value. So I don't know how you can get a value of "not entered" into a multi-value parameter.
I also don't know how you would check for the "not entered". Someone suggested the following SQL:
WHERE ( [Field1] IN (@Field1_Filter) OR @Field1_Filter IS NULL )
This generates an error when generating the report if multiple values are entered for the parameter (the normal condition). The error is " An expression of non-boolean type specified in a context where a condition is expected, near ',' ".
How is this supposed to be done?
Thanks for any insight
View 12 Replies
View Related
Mar 19, 2007
hi,
i'm trying to perform a query against a db2 database like this:
SELECT ... FROM ... WHERE (field IN (?))
Then i let reporting services pass the parameter to the report. When i try to preview the report, i get the following error:
An error occurred during local report processing,
An error has occured during report processing,
Cannot add multi value query parameter '?' for data set ... because it is not supported by the data extension
But when i type the query like this
SELECT ... FROM ... WHERE (field IN ('value1','value2'))
it executes flawlessly.
I am using the IBM ole db driver for db2 if that matters
Can anyone help me?
View 5 Replies
View Related
Mar 27, 2007
Good afternoon,
I've designed a Reporting Services report that has a multi-value parameter. The report works just great. The only issue I'm running into is that the users are complaining that when they want to select the values, within the multi-value parameter box, they have to scroll it to the sides way too much. This also makes them select values by mistake.
Is there away to inscrease the width of the multi-value parameter box?
Best regards.
View 20 Replies
View Related
