I am trying to get a simple list to wrap and print in multiple columns on my report. I have indicated 3 multi-columns in the report properties and see the multiple columns in the layout, but I must need to do something else because the report is still printing in one column to multiple pages. This should all fit on 1 page if the list will wrap or snake as it says it the directions for using multi-column reports.
I have a requirement where i have to display some data in the form of multi column but the main report should be in a standard one.I have tried by using sub report as multi column and used that in my main report but when i preview the report  it is considering it as a normal report.Do we have any feature in SSRS to have both multi & standard report layouts in one report.
I have a 2 coulmns report ,one group ,when I print the report,it does not paging correctly.For example,suppose every column can display 20 rows, if every group has 20-40 rows ,the print is ok,it can paging correctly,but if one group has 10 rows or more than 40 and less than 60,the two groups will print on one paper,how can I print the every group on different paper?
Hi, I have created a multi column report (2 columns), which is working fine. However, I need to have a chart on the same report, but it needs to be the width of the page, and not just the width of one column.
If I could put the chart in the report footer / header that would be perfect, but obviously I can't!
Has anyone else come across this, and any ideas / suggestions you have would be appreciated!
I have a multi-column report with a page header that spans the width of the report. Whenever I close the report and reopen it, the header is changed to the width of the column. This isn't a real big deal because I deploy it with the header across the whole page; but once in a blue moon I accidentally hit the F5 key (which I am used to using for refresh in other environments I work in) and the report gets redeployed with the messed up header. Is there anyway to stop RS from automatically adjusting the page header?
And is there anyway to disable the F5 key from deploying the reports. I do use it to build and run windows apps, and don't want to change that, but I don't want to deploy 80+ reports when I accidentially hit it.
When I use the PageBreakAtEnd on the table or on a group in the table, all it does is create a new column of the column report.
I'd want it to start a new page, how can I do this ? Should I work around this issue using code ?
Background: What I need to achieve is a report with 2 columns where the list of products in category 1 are listed in the left column and then snake to the 2nd column on the same page, then to column 1 on page 2, column 2 on page 2, etc...
When it comes to category 2, it should start a fresh new page regardless of whether the previous product was rendered in column 1 or column 2.
I get the snaking to work using the "Columns" property of the report Body. However page breaks do not start a new page, they just start a new column.
It seams that I have run into a know and apparently unsolved problem.
How do I force a page break, not column break, on a multi-column report?
I have 4 columns, my data is grouped and is setup to page break after each group. But all I get is a column break, due to RS thinking of column's as pages.
Several people have posted about the same problem, but I can't find a solution. See... http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=884945&SiteID=17 http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=226045&SiteID=17
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
I am trying to exclude records from a table where the ID column is the same but the Mail code Column is multi-valued.For Example: (the table looks like....)
I have two tables, one a data table, the other a product table. I want to perform a join on the two tables with values distributed into columns based on the value in the month field.
Hi,Would like to know the performance differenece between Multi-columnIndex vs Single Column Indexes. Let's say I have a table with col1,col2, col3 along with a primary key column and non-indexed columns.In queries, I will use col1, col2, and col3 together and some timesjust one or two of these three columns. My questions is, should Icreate one index contains col1, col2, and col3, or create 3 seperatedcolumns. I.e. each column has its own index. Any performancedifference?Thanks a lot.
I have been working on this for quite some time and I can not figure out what I am doing wrong. I have a report filter called ItemFilter and I have declared as a report parameter where the multi value checkbox is checked. The values from this filter are coming from the item table. SO the users drilldown on the filter when they run the report an select the Items that they would like to display info for. I had the following code before in the where
where ([CRONUS International Ltd_$Item].No_ = @itemfilter). This only worked if they selected on item from the list.
I want them to be able to select multiple Items or all. The code above did not work because there were commas separating one item from the other and I was getting an error.
I changed to
whrere
([CRONUS International Ltd_$Item].No_ IN (@itemfilter)).
Now this only returns the first item that I enter on my Itemfilter parameter.
Does anyone have any clue in regards to this ?? I am sure I am using the wrong syntax, but I do not know what to change it too.
I currently have two different reports that I print and then combine together, with multiple records printed with both reports. This works ok but I'd like to combine them. I need to still have two pages print. Is there a way to combine these? The db is being used for an event where I need to get the pages printed quickly so if they can be combined it would sure help out.
Basically I had 2 paramater which ComputerName and MemberName.
The membername was set as Multi-Value as sets as follow: Label: Value: Exclude Domain Admins Domain Admins Exclude Local Install Local Install
And the query is:
SELECT id, ComputerName, GroupName, MemberName, ScanDate FROM GROUPMEMBERS WITH (NOLOCK) WHERE ComputerCN LIKE '%' + @ComputerName + '%' AND MemberName NOT IN (@MemberName) ORDER BY ComputerName ASC
The prompt is like this: Computer Name [ ] Excluded by [ ]
The issue is in the second prompt I have to select "something" which is I don't want to. I want the user to have this parameter as an optional.
I have a parameterized main report that contains a link to a sub report with parameters. Then from the sub report I have a link that takes you back to main report. If I use multi value parameters or single value parameters the links going back and forth between the two reports works just dandy, when I run it on my PC. However when I deploy the reports to the Web Server, the link going from the sub report back to the main report only works if the parameters are single select. Going from the Main to the Sub it doesn€™t matter.
This is the error I get using multi select parameters going from the sub report back to the main.
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
I am trying to use a Multi-Value Report Parameter to determine Visibility, I found this to work great when I only had 2 values (0 or 1), but I have 5 now (0, 1, 2, 3, 4).
I can see what is happening, but I don't know how to write the Visibility Expression to get it to work for all conditions. I can clearly see that when more than one option is selected from the drop down box the Report Parameter goes from Parameters!ReportSelect.Value(0) to
Parameters!ReportSelect.Value(0)
Parameters!ReportSelect.Value(1)
Parameters!ReportSelect.Value(2)
Parameters!ReportSelect.Value(3)
Parameters!ReportSelect.Value(4)
one for each number of variables selected. I need to evaluate for all possible values and if any of them are the one selected I want it to be visable.
Currently I am using this expression on Visability:
I have 6 columns: Column1a, Column1, Column2a, Column2, Column3a, Column3
I need a statement that will go through the whole table as follows: For each row, if column3 is not null then return column3 as columnB and column3a as ColumnA. If column3 is null then if column2 is not null then return column2 as columnB and column2a as columnA. If column3 & column2 is null then return column1 as columnB and column1a as columnA.
Price ----- 777 888 999 777 888 999 777 888 999 (pretend these columns are side by side) ======================
I need to make a query to: SELECT PRICE AS 'PRICE1' WHERE PRICELIST = 1 AND SELECT PRICE AS 'PRICE2' WHERE PRICELIST = 2 AND SELECT PRICE AS 'PRICE3' WHERE PRICELIST = 3
the output that i want is:
PRICE1 ------ 777 777 777
PRICE2 ------ 888 888 888
PRICE3 ----- 999 999 999 (pretend these columns are also side by side)
I have a [TestTable] table with three rows. The pair of columns [Test1] and [Test2] are id, the [Test3] is a data column. First, I get a table variable with list of id pairs. Next, I would like to update the rows of that ids. However, I have not found the elegant way how to do it. For one column it is simple, just IN clause, which does not work (or I could not find how) for multi-columns. Does someone have a hint?
Thanks,
Martin
Note: The example bellow is dummy; on the other hand, I hope it shows the important points. Please, do not beat me on syntax errors.
Code Block DECLARE @MyTableVar table( Test1 int NOT NULL, Test2 int NOT NULL );
SELECT [Test1],[Test2] INTO @MyTableVar FROM [TestTable] WHERE [Test3] = '%dd%';
UPDATE [TestTable] SET [Test3] = [Test3] + 'ds' WHERE ([Test1], [Test2]) IN (SELECT [Test1], [Test2] FROM @MyTableVar);
I'm trying to get a data value to appear in the report footer on each page of my report. Using the technique described in various text books etc. I have placed a hidden text box in the report body, and the footer references this text box value.
The report is 4 pages long when I print preview it. The hidden field was initially placed near the top of the report body, so it is there on page 1 in print preview and the footer works on page 1. Pages 2,3,4 (where the hidden field ain't) just gets #Error in the footer.
If I simply move the hidden field further down in the report body so that now its on page 2 in print preview, then guess what - the footer now works on page 2 but errors everywhere else!
Why are ReportItems not known across the whole report? This is maddening. Does anyone know how to make a simple hidden text box value, that is referenced by the page footer, work so that every instance of the page footer shows the correct value?
I have a report with a multi-value parameter. In its' drop drop box, I can select ALL or I can individually select single items, but it doesn't appear that I can select a range of items using the shift key. The problem is; occasionally the user will want to select everything, and them eliminate an item or two. The list it too long to select every one individually. It would be an easy solution if hey could select the entire list, then deselect what they don't want. Is there a way?
What I need to do is to create 3 columns with 3 different aliases from the same table that will return all the values during the following conditions:
when pricelist = 1
when pricelist = 2
when pricelist = 3
pricelist -------- 1 2 3
Price -------- 912 -- (linked with 1) 234 -- (linked with 3) 56 -- (linked with 2) 3245 -- (linked with 3) 234 -- (linked with 1) 65 -- (linked with 2)
these 2 columns are in the same table^^
so what i want my query to generate is:
Price1 -------- 912 234
Price2 -------- 56 65
Price3 -------- 234 3245
Any help is apprecieated, thanks
if the above does not make sense to you maybe this will: "can you make 3 aliases of the same column and only display the rows inside each column where pricelist = 1 for the 1st alias... where price = 2 for the 2nd alias...where pricelist = 3 for the 3rd alias"
