Multi-formatted Text In A Single Texbox
Apr 24, 2007
The latest similar question is almost a year old and hasn't been definitively answered. I'm designing a certificate type report where the declaration text uses static and dynamic text generated in an expression for the textbox. The problem is that there doesn't seem to be an obvious way of formating sections of the text expression with different font sizes, weights and attributes to depict the effect desired. E.g. I want one textbox to say:
This Certifies that {a field value} was blah blah blah by {another field value} etc.
Can this be done in a regular textbox? If not, are there any work-arounds to accomplish the same effect. BTW, I'm working in RS 2005 flavor with VS 2005 Report Designer.
Thanks in advance for your help.
View 4 Replies
ADVERTISEMENT
Feb 27, 2007
In SSRS I am trying to get a textbox value to hold text with a mixture of formatting, along the lines of "name (country)" where the "name" part is bold and the "(country)" is normally formated.
Can anyone help?
Thanks in advance.
View 3 Replies
View Related
Apr 29, 2008
Hello,
I know this question has been asked here before, but it was ridiculously answered : http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=98764&SiteID=1
I have a text object on my crystal report, to which I programmatically want to assign text in CS. It all works fine, except that if I have html tags in there, the text doesn't get formatted, it just displays the html tags as text as well.
Now in thread linked above, the answer was: right click the text object, and format the text object, hit paragraph text and select text interpretation to HTML. The only problem is, that for a text object, it doesn't have the text interpretation option. It's only an option for a formula field. It says so in the tech support link posted inside the post itself!!!
So if you have any idea how I can do this, please someone help me out. I am new to crystal, and there's not much helpful info on it online. I've searched for this for hours, and no solution.
Thanks
View 3 Replies
View Related
Mar 29, 2001
Is there a way to store a formatted text (bold, italicized etc) in a text field on SQL Server 7.0 ?
View 2 Replies
View Related
Mar 29, 2007
Hi,
I am trying to write the output of an sql query to a text file using bcp. Now the problem am facing is i have to format the text like i the following order...
<DATETIMESTAMP>08:39 Thursday, March 15, 2007</DATETIMESTAMP><CATEGORY>Quarterly Sales</CATEGORY><HEADLINE>Quarterly Corporate Earnings (03/15/07)</HEADLINE><BODY> Quarterly Corporate Profits (03/15/07) PER-SHARE ($) NET EARNINGS (mil$) REV. (mil$)COMPANY CURRENT YEAR-AGO CURRENT YEAR-AGO CURRENT YEAR-AGOabc 0.33 n/a 8.60 (13.30) 144.40 112.50 bcdf 0.16 (0.15) 7.80 (7.40) 101.90 81.20 gha n/a n/a (90.00) (80.00) 488.00 462.00 qwqw (0.10) (0.15) (3.30) (4.30) 2.90 2.20
Copyright(c) 2007 mycompany.com, Inc. All Rights Reserved</BODY>
Would somebody please advice whther this sort of formatting is possible with bcp..Please give some pointers am completely stuck....the company data is coming from a database table...am using sql 2005...
Thanks in advance
View 1 Replies
View Related
Jan 9, 2006
Hi All ,
Is it possible to insert the below text into a column and retrieve it in the same format ?
Thanks,
Hari Haran Arulmozhi
TEXT :
CLIENT NAME : ABC Corporation
CLIENT CITY : MUMBAI
================================================
INV_NO INV_DATE INV_AMT
================================================
I100 01-01-2006 Rs.600
I200 01-02-2006 Rs.800
I300 01-03-2006 Rs.1600
I400 01-04-2006 Rs.2600
I500 01-05-2006 Rs.9600
RECEIVED ADVANCE :Rs.10000
View 3 Replies
View Related
May 9, 2006
I have some textual data that comes preformatted with some extra spaces and line feeds. I am attempting to put it in a Report using SSRS 2005.
When ever I view the report in HTML Mode all of the extra whitespace is suppressed into a single space. However when I export to PDF or Word it all comes back. I have tried using the .Replace() method to put in and <BR> tags into my code, but then it just displays the extra text and doesn't display it as HTML.
Is there anyway either replace the items with the appropriate HTML, or add the "PRE" whitespace CSS attribute to a Textbox so that the text displays the same in HTML and in a PDF?
Thanks.
View 2 Replies
View Related
Oct 26, 2015
on this report, am having ids separated by '^'.when I export to excel, I wrote the expression as
=Replace(Fields!Id.Value,"^",Environment.NewLine)
It is working fine, but the problem is if I have only one id in some scenario, then this case that cell is showing an error "The Number in this cell formatted as text or precedence by apostrophe" .But in other scenario,If the ids are separated by "^", then this case that cell wont show any error. So I need to display the cell wont have any error symbol  if I have only one id .How can I achieve this?.
View 4 Replies
View Related
Aug 29, 2007
Hello
I created a table adapter with the following query
select * from building where buildingname in (@param1)
I used the query builder to the test the query and it works ok if I pass a single value
ex: name: @param1 value: Building1
but when I use the value: Building1, Building2 then it doesn't return anything
If i do a direct sql: select * from building where buildingname in ('Buiding1','Buiding2') returns many rows.
Now I have a class that has the following function<System.ComponentModel.DataObjectMethodAttribute(ComponentModel.DataObjectMethodType.Select, False)> _
Public Function getBuilding(ByVal building As String) As myDataSet.buildingDataTableReturn adapter.getBuilding(building)
End Function
When I call this function I try to pass the building value sorta like
dim building as string = 'Building1,Building2'
and it doesn't work. I tried a whole bunch of variations.
How are you supposed to format the parameter string?
Thanks
Peter
View 4 Replies
View Related
Jul 7, 2001
SQL7
If I have a job that runs every minute, and that job happens to take more than one minute to run on occassion, will SQL Server start a second instance of the job or will it be serial - one after another ?
Thanks,
Craig
View 2 Replies
View Related
Mar 22, 2007
I have a parameterized main report that contains a link to a sub report with parameters. Then from the sub report I have a link that takes you back to main report. If I use multi value parameters or single value parameters the links going back and forth between the two reports works just dandy, when I run it on my PC. However when I deploy the reports to the Web Server, the link going from the sub report back to the main report only works if the parameters are single select. Going from the Main to the Sub it doesn€™t matter.
This is the error I get using multi select parameters going from the sub report back to the main.
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
Any suggestions?
View 1 Replies
View Related
Feb 13, 2007
This is an easy question. I thought I have databinded a textbox to a SQLDataSource. But now I do not see how to do that now. Can somebody help with this?
Thanks,
View 1 Replies
View Related
Apr 12, 2006
Hi all,
Does anyone know how to read in the last value from a SQL database and return it to a textbox?
View 1 Replies
View Related
Mar 5, 2007
I had a multi publisher single subscriber replication in my job and now i want remove it. i disabled the subscriber. Now if i disable the publisher and distributor then it gives me a error cannot drop the distribution DB because it is currently in use. this DB can never be dropped since there is at least one publisher at one time that accesses this DB everytime. How should I disable this publication.
View 1 Replies
View Related
Nov 27, 2007
I have a report I am creating in sql reporting services 2005 and what I am trying to do is have a single text box with multiple lines of data format each item in the textbox to specific parameters but I have not been able to figure it out. I tried to format my data on the sql side so that it cam out as follows:
tried
Monday, Nov. 26, 2007
"Color = Blue FontWeight = Bold " & John Doe & CHAR(9) & "Color = Red FontWeight = Normal " & Jane Smith & CHAR(9) & "Color = Black FontWeight = Bold" John Roberts
This did not work
so then I tried
Monday, Nov. 26, 2007
"FontColor = Blue FontWeight = Bold " & John Doe & CHAR(9) & "FontColor = Red FontWeight = Normal " & Jane Smith & CHAR(9) & "FontColor = Black FontWeight = Bold" John Roberts
Still did not work
What my end result needs to be in a single text box...
Monday, Nov. 26, 2007
John Doe Jane Smith John Roberts
If anyone has the answer thanks ahead of time.
Mike
View 6 Replies
View Related
Oct 20, 2015
I want to maintain all configurations in Single table, what is the best way to approach it.
View 5 Replies
View Related
Apr 16, 2013
I got issue when passing multiple values to a single parameter. Here is my stored procedure as following:
CREATE PROCEDURE [dbo].[School]
@Grade AS varchar(50),
@Class As varchar(50)
AS
BEGIN
SELECT Name, Grade, Class
FROM School
WHERE Grade = (IsNull(@Grade, Grade)) AND Class IN (IsNull(@Class, Class ))
END
In the front end, I got multiple values for Subject parameters such as Math, English, Reading, etc... in a specified class. How do I can modify my above stored procedure to receive multiple values for a single parameter.
View 14 Replies
View Related
Aug 19, 2014
I have a DB that is currently not normalized and will be getting about 100K concurrent users that will mostly be doing Read-Only operations from multiple tables.
I am trying to figure out if I should start thinking of having a DB per client (1000 clients) or if I should normalize the database and keep it as a single DB with good indexes and partitioning.
Hardware is not a problem but 100K concurrent users is.
View 1 Replies
View Related
Mar 4, 2015
I have tried everything I found on Google, but nothing seems to be working. Already Ran alter command set multi_user, but getting an error.
"Msg 5064, Level 16, State 1, Line 1
Changes to the state or options of database cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.
Msg 5069, Level 16, State 1, Line 1..ALTER DATABASE statement failed."
View 8 Replies
View Related
Jul 20, 2005
is it possible to use a single connection object shared by severaltasks where each task is handled by a thread? these tasks call storedprocedures that return record sets, no editing, update or delete.my objective is that db connection is expensive and each user can onlyhave 1 connection object. each user submits a request to the webserver, and the result web page construction consists of a number ofresult sets obtained from several stored procedure from the samedatabase instance.i could obtained my result sets by making each sp call one at a timebut was thinking whether i could instead break up the tasks, create athread for each task that shares the same db connection objectconcurrently. the connection object will be alive until all tasks arecompleted, that is if the final object ive could be achieved in ashorter time. No connection pooling here.i am wondering over questions like:1. within the same db instance, if 2 stored procedures need to accessthe same table, does SQLserver queue-up and service one request at atime.2. would there be any problem using the connection object this way,sharing between multiple theads?3. is it possible that a 'dead-lock' may occur within the DB?of cos this whole idea can be absurd and into the trash if theconnection object doesn't support multi-thread and is queue based inthe first place.pardon me if my SQL server basics is off track. been doing too manyother things.thanks,meng
View 2 Replies
View Related
May 1, 2008
Hi,
I'm using SSRS 2005 which connects to SQL Server 2005. I need to pass Multi valus for single parameter...
E.g. Command type : Text
SELECT * FROM COUNTRY where CountryId IN ( @CountryID)
If i tried to preview using single parameter, it shows the record without any problem. However when i tried to put multi values, it gives error message?? I read somewhere which says, need to set to multivalue. But, i could not find the place to set the multi value option...
How to solve it?? Your suggestion/recommendations greatly appreciated.
Thanks
rama
View 5 Replies
View Related
Jul 2, 2015
I have a sp where query is as below.
DECLARE @ServerCIName varchar(5000)
SELECT * FROMÂ dbo.INC
WHERE Status in ('Assigned','In Progress','Pending')
and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%'
and (select DATEADD(dd, DATEDIFF(dd, 0, (Submit_Date)), 0)) = (select DATEADD(dd, DATEDIFF(dd, 0, getdate()), 0))
In place of "and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%' ", if I use "and Description like '%' + @ServerName + '%' " and pass a single value, it works.
But @ServerName contains multiple values and it is dynamic (not constant).
How do I query the data?
View 6 Replies
View Related
Feb 12, 2007
I admit I am a novice to queries and stored procedures but understand stored procedures are more secure, so I am choosing to challenge myself with a stored procedure and have not been successful at all.
What I am looking for is a stored procedure which would query the single table named Hospital, which would search from a single textbox the end user would enter the text they are searching for on a Windows VB application but is dependant on a few end user selected items.
1. The end user can select a radio button either "Starts with" or "Contains"
2. The end user can select from 6 checkboxes (Hospitals, Address, City, State, Zip, Type) to limit or expand their search from the columns in the table.
The table has 17columns (CO, PARENTCO, ADDR, POBox, CITY, State, ZIP, TEL, FAX, WEBSITE, HOSP_TYPE, OWNERSHIP, BEDS, CONTACT, TITLE, Email) but I am only allowing the end user to search by the above 6 columns and need to display the above 6 columns plus the phone, fax and website columns.
After the user clicks the search button it displays the results in a listbox and the user will then select the one they want and it displays the information in another set of textboxes.
Hopefully someone can get me pointed in the right direction! Thanks for your help!
View 12 Replies
View Related
Sep 28, 2004
Hi,
I have a Multiline Textbox in my application.The value from the textbox is updates in a SQL
table.The problem i have is
If I type in the textbox 1211 London street Sussex <br> UK <br>Europe ,only 1211 London street Sussex gets into the table.Anything I type after the "Enter " doesnot go into the table.
I checked the field sizes in my stored procedure and they are varchar(500) .
Any ideas
View 4 Replies
View Related
Nov 7, 2007
I would like a form that has 3 text boxes. These 3 boxes are going to be used for entering search criteria. The first box is for searching a field called CasePK. The second is for searching a field called LinePK and the third is for searching a field called DOS. DOS is a date field. The other two are text fields.I am using a SQLDATASOURCE and a Gridview. What will the SelectCommand look like so that I can search the 3 fields using the data from the textboxes?
View 1 Replies
View Related
Apr 5, 2007
Hello. I am in the process of migrating an old app to SQL Server. The old app reads hundreds of different flat file formats. One of the more complex ones is a multi-format delimited file. For example:
01^Bob Johnson^123 Main St^Anytown^St
02^Book1^$20
02^Book2^$30
03^Gift Cert^Happy Birthday^$100
This file is delimited with the ^ character. Note that the first 2 characters identify the row type. All 01 rows have data in the format: Name, Street Address, City, State. All 02 have data in the format: Book name, price. Etc.
Any clever ideas on how to parse this? I tried setting it up as a flat file source with the ^ delimiter. It doesn't work - in this example it wraps the third row to the end of the second row and keeps adding columns to fill out the row.
The only option that I can think of is to pull the entire row into one long column, and then use a script component to manually substring each column out.
Any help would be greatly appreciated.
Thanks,
Chris
View 7 Replies
View Related
Apr 9, 2004
I have a text file I need to import into a SQL Server table. Each record spans several lines. Does anyone have a vbscript routine that wil go thru this text file and put each record on one row? Once the records are one row, DTS will easily handle the import. Or is there a better way?
Sample multi-row records:
WRLDWYXCDS1 ALT101 APR04 21:30:24 6879 FAIL ALT
HOST 00 0 08 00 DN 3073477171 1st CYCLE
TEST TYPE CKTTST DIAGNOSTIC RESULT BIC/EBS LC TRBL:PTRN 000E S= 1 R= 0
ACTION REQUIRED Replace Card CARD TYPE 6X21AC
WRLDWYXCDS1 ALT101 APR04 22:31:37 7672 FAIL ALT
HOST 00 0 08 00 DN 3073477171 1st CYCLE
TEST TYPE CKTTST DIAGNOSTIC RESULT BIC/EBS LC TRBL:PTRN 000E S= 1 R= 0
ACTION REQUIRED Replace Card CARD TYPE 6X21AC
View 3 Replies
View Related
Mar 19, 2008
Hi All,
I have a report parameter which i multivalue. I want to display the selected value in a text box. I have written the following code :
=Switch(Parameters!ServiceAttribute.Count = 1,Parameters!ServiceAttribute.Value(0),
Parameters!ServiceAttribute.Count = 2,(Parameters!ServiceAttribute.Value(0) & ", " & Parameters!ServiceAttribute.Value(1)))
Which suggests that if only one of the two multivalue parameter id is selected display the same (Parameters!ServiceAttribute.Value(0)).
This works fine when i select both the attributes but throws an exception "Index was outside the bounds of the array" when i select only one of the parameters. Can anyone help me with that?
Also i want this report parameter to allow null i.e. if a user does not select anything he should still be able to view the report.
In case of regular dropdowns i have added a <Null> value to the existing values and set the default to null. But in case of multi-value, it does not give an option of adding <Null>
View 5 Replies
View Related
Aug 18, 2015
We have a SQL 2014 AlwaysOn availability group running on two Windows 2012 R2 servers that are in the same subnet. We created a new server in a second subnet, installed SQL, joined the server to the Windows cluster, added a new IP resource for the new cluster, and performed the other remaining steps to add a new AG replica to the SQL instance on this new server. When we try to move the core cluster resources to the new node to test failover, we get an error. Here's the command we've been using:
Move-ClusterGroup "Cluster Group" -Node node3
and it returns the error: The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group...I've checked the ownership of the cluster groups and the cluster resources and it looks like they are set appropriately:
>Get-ClusterGroup | Get-ClusterOwnerNode
Cluster Object Owner Nodes
---------------- ---------------
Available Storage {}
Cluster Group {node1,node2,node3}
SQLAG {node1,node2,node3}
[code]....
We've double-checked that all IP resources are in the right subnets and that the dependencies for the Cluster Name resource and the Listener Name resource are set appropriately. I'm not sure what else to check since the PowerShell commands seem to indicate that node3 is an owner of the appropriate resources. What other things need to be checked or if the ownership being checked isn't the same as what PowerShell is checking?
View 3 Replies
View Related
Aug 20, 2007
Here's tricky one.
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
Essentially, I want to create a for each loop.
Any ideas?
View 4 Replies
View Related
Feb 4, 2008
I would like to be able to adjust the multi-value property of a parameter based on the value of another parameter in my report. The controlling paramter would be binary with two options for Single or Multiple selection. I would like my parameter to default to multi-value, which I can do on the screen selection. I have tried to add an IIF statement to the XML code, with no success. Any ideas would be helpful.
Thanks
View 4 Replies
View Related
Jan 9, 2008
I have two tables, one a data table, the other a product table. I want to perform a join on the two tables with values distributed into columns based on the value in the month field.
data_table
product_code month value
350 1 10
350 2 20
350 3 30
product_table
product_code profit_center
350 4520
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 20 30
My current query gives the following result
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 0 0
350 4520 0 20 0
350 4520 0 0 30
Any direction toward a solution would be appreciated. Am using SS2005.
View 5 Replies
View Related
Nov 7, 2006
When users enter text into a textbox, to be INSERTed into my table, SQL Server throws an error if their text contains a single quote.
For example, if they enter "It's great!" then it causes this error:Error: Incorrect syntax near 's'. Unclosed quotation mark after the character string ''.
How can I allow text with single quotes to be inserted into the table?
Here's my code:
string strInsert = "INSERT INTO [Comments] ([GameID], [UserID], [Comment]) VALUES (@GameID, @UserID, @Comment)";
SqlConnection myConnection = new SqlConnection(<<myconnectionstuff>>);SqlCommand myCommand = new SqlCommand(strInsert, myConnection);
myCommand.Parameters.Add( "@GameID", Request.QueryString["GameID"] );myCommand.Parameters.Add( "@UserID", (string)Session["UserID"] );myCommand.Parameters.Add( "@Comment", ThisUserCommentTextBox.Text );
try {myCommand.Connection.Open();myCommand.ExecuteNonQuery();}
catch (SqlException ex) {ErrorLabel.Text = "Error: " + ex.Message;}
finally {myCommand.Connection.Close();}
View 10 Replies
View Related
