In the provided CLR-function sample there is only one parameter from the SQL statement to the function. I can't find any info about how to pass more then one parameter. Is this possible somehow?
like:
Code Snippet
Select ShopCode,PickAValue(OrderDate,Article) as BestArticle
from T_Sales
Group by ShopCode
hans
i have on table temp and it has column name fhID, now that column name and table name comes as parameter in stored procedure from c#.
now stored procedure has code somthing like below
@column nvarchar(50)
@tbname nvarchar(50)
-- both are parameter comes from c#
decalre @maxid
select @maxid=max(@column) from @tbname
rather than prints the maximum values of "fhid" it prints column name itself.
now i how can i achive actual working of max function using parameter.
is there any other way to pass parameter in aggregate function or it is not allowed to pass.???
plz help me,
thanks
vishal parekh
'fhid'
now how can
How can do this. Because my stored function contains same clause except colums name.So I want to use column name as a parameter but how can send column name and use it like Sum(parameter) function .
my procedure like this:
ALTER PROCEDURE [dbo].[ORNEK10]
@YIL VARCHAR(4),
@TEKLIF_TURU VARCHAR(255)
AS
BEGIN
DECLARE @N1 FLOAT
DECLARE @N2 FLOAT
SET @N1 = ( SELECT DEGERI FROM PARAMETRE WHERE PARAMETRE_ADI='N1')
SET @N2 = ( SELECT DEGERI FROM PARAMETRE WHERE PARAMETRE_ADI='N2')
SET NOCOUNT ON;
--I want to avoid using if statements for Sum() function
IF(@TEKLIF_TURU='BASKAN_TEKLIF')
SELECT TOP (100) PERCENT KOD1, KOD2, KOD3, KOD4, dbo.ORNEK10AD(KOD1, KOD2, KOD3, KOD4) AS ACIKLAMA,
SUM(BASKAN_TEKLIF) AS YILI,
((100+@N1)*SUM(BASKAN_TEKLIF))/100 AS YIL1,
((100+@N1)*(100+@N2)*SUM(BASKAN_TEKLIF))/10000 AS YIL2
FROM GELIR AS G WHERE YIL = @YIL GROUP BY KOD1, KOD2, KOD3, KOD4 WITH ROLLUP
ORDER BY KOD1, KOD2, KOD3, KOD4
IF(@TEKLIF_TURU='ENCUMEN_TEKLIF')
SELECT TOP (100) PERCENT KOD1, KOD2, KOD3, KOD4, dbo.ORNEK10AD(KOD1, KOD2, KOD3, KOD4) AS ACIKLAMA,
SUM(ENCUMEN_TEKLIF) AS YILI,
((100+@N1)*SUM(ENCUMEN_TEKLIF))/100 AS YIL1,
((100+@N1)*(100+@N2)*SUM(ENCUMEN_TEKLIF))/10000 AS YIL2
FROM GELIR AS G WHERE YIL = @YIL GROUP BY KOD1, KOD2, KOD3, KOD4 WITH ROLLUP
ORDER BY KOD1, KOD2, KOD3, KOD4
IF(@TEKLIF_TURU='MECLIS_TEKLIF')
SELECT TOP (100) PERCENT KOD1, KOD2, KOD3, KOD4, dbo.ORNEK10AD(KOD1, KOD2, KOD3, KOD4) AS ACIKLAMA,
SUM(MECLIS_TEKLIF) AS YILI,
((100+@N1)*SUM(MECLIS_TEKLIF))/100 AS YIL1,
((100+@N1)*(100+@N2)*SUM(MECLIS_TEKLIF))/10000 AS YIL2
FROM GELIR AS G WHERE YIL = @YIL GROUP BY KOD1, KOD2, KOD3, KOD4 WITH ROLLUP
ORDER BY KOD1, KOD2, KOD3, KOD4
END
I have a report with the following dataset query:
Code Snippet
SELECT ...,
dbo.getActivitySinceBeginningYear(..., @countryId ,...) AS HoursYear
FROM ....
WHERE cast(detail.COUNTRY_ID as nvarchar(max)) IN (@countryId)
AND ...
GROUP BY ...
countryId is defined as a String multi-valued parameter.
The getActivitySinceBeginningYear is defined as follows:
Code Snippet
ALTER FUNCTION dbo.getActivitySinceBeginningYear
(
...
@countryId ntext,
...
)
RETURNS decimal(18,5)
AS
BEGIN
declare @return decimal(18,5)
set @return = 0.0
SELECT @return = SUM(detail.HOURS_WORKED)
FROM ...
inner join charlist_to_table(@countryId, Default) f on detail.COUNTRY_ID = f.str
WHERE ...
RETURN @return
END
This function works as expected if I transmit one ID or several.
The report works fine if I check only one ID.
If I check several IDs, the report displays this error:
Procedure or function dbo.getActivitySinceBeginningYear has too many arguments specified.
Why???
My second problem is with the Where clause:
Code Snippet
WHERE cast(detail.COUNTRY_ID as nvarchar(max)) IN (@countryId)
If I do:
Code SnippetWHERE detail.COUNTRY_ID IN (@countryId)
I have the following error:
Conversion failed when converting the nvarchar value '3,5' to data type int.
(I transmitted 3 and 5 for countryId)
That's why I tried to use a cast, but the data returned by the query is wrong when I transmit several value.
??
I am trying to create a column chart that calculates the percentage of computers in our IT environment that are Actively communicating to our SCCM Server.
I have two datasets:
1. Total_Count_Of_AD_PC DataSet.
2. PC_With_Active_SCCM_Clients dataset.
Basically i wan to calculate the percentage for each Region (i.e. AP for Asia Pacific, EMEA, Americas).
Below is the Total_Count_Of_AD_PC Dataset screenshot.
Below is the PC_With_Active_SCCM_Clients dataset.
Below is the expression that i used that is causing the error.
=CountDistinct(IIf(Fields!Region.Value="AP", "PC_With_Active_SCCM_Clients"),(Fields!Name.Value, "PC_With_Active_SCCM_Clients"),Nothing)/CountDistinct(IIf(Fields!Region.Value="AP", "Total_Count_Of_AD_PC"),(Fields!name.Value,
"Total_Count_Of_AD_PC"),Nothing)
Below is the error message....
The Y expression for the chart ‘Chart2’ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset.
Hello everybody,
I need to create a function which takes a multi-value parameter. When I select more than one item, I get the error that I have too many arguments. Does anybody have a solution?
Or can I create a view and then do a "SELECT * FROM viewName WHERE columnName IN (@param)"?
Thanks in advance for your answers.
I have an SSRS report with several variables, some of which are multi-valued. The main query that feeds the report uses some table value functions. For example, the query looks something like this:
select tv1.a, tv1.b, tv2.x, tv2.y, tbl.m, tbl.n
from tableValueFunction1(@MultiValueParam) as tv1
inner join tableValueFunction2(@MultiValueParam) as tv2 on tv1.xxx = tv2.xxx
inner join regularTable as tbl on tv1.xxx = tbl.xxx
where tbl.abc in (@MultiValueParam).When I try to run this, I get an error saying that I'm feeding the wrong number of parameters into the table value functions. I've fed multi-valued parameters to stored procedures before and used a splitter function to split out the comma separated values, so I was planning to do the same thing in this scenario. However, this is different. When I look at the query in SQL Profiler, it shows discrete values for the multi value parameter. For example, the same query above looks like this when viewed through the profiler (using 1,2,3 as my multi-value selection):
select tv1.a, tv1.b, tv2.x, tv3.y, tbl.m, tbl.n
from tableValueFunction1(1,2,3) as tv1
inner join tableValueFunction2(1,2,3) as tv2 on tv1.xxx = tv2.xxx
inner join regularTable as tbl on tv1.xxx = tbl.xxx
where tbl.abc in (1,2,3)
In other words, SSRS isn't converting the multi-value parameter to a comma separated string, like it normally does.
Can any1 tell me why i am getting an error
SELECT DISTINCT
--p.voucher,
--p.amount,
p.siteID,
b.siteID,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS OutStandingBalance,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS CashCheque,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS Vouchers
FROM
BillingTotal b,
Payment p
--WHERE
-- s.sitename=@cmb1
--AND p.siteid = s.siteid
-- p.voucher = 0
-- p.voucher = 1
GROUP BY p.siteID,b.siteID
Msg 130, Level 15, State 1, Line 1
Cannot perform an aggregate function on an expression containing an aggregate or a subquery.
I am using RS 2000. I have a multi select parameter where I can select multiple states by separating with a comma. I am trying to figure out how to incorporate an "All" parameter.
Query:
Select [name], city, state, zipcode
From Golf inner join charlist_to_table(@State,Default)f on State = f.str
Function:
CREATE FUNCTION charlist_to_table
(@list ntext,
@delimiter nchar(1) = N',')
RETURNS @tbl Table (listpos int IDENTITY(1, 1) NOT NULL,
str varchar(4000),
nstr nvarchar(2000)) AS
BEGIN
DECLARE @pos int,
@textpos int,
@chunklen smallint,
@tmpstr nvarchar(4000),
@leftover nvarchar(4000),
@tmpval nvarchar(4000)
SET @textpos = 1
SET @leftover = ''
WHILE @textpos <= datalength(@list) / 2
BEGIN
SET @chunklen = 4000 - datalength(@leftover) / 2
SET @tmpstr = @leftover + substring(@list, @textpos, @chunklen)
SET @textpos = @textpos + @chunklen
SET @pos = charindex(@delimiter, @tmpstr)
WHILE @pos > 0
BEGIN
SET @tmpval = ltrim(rtrim(left(@tmpstr, @pos - 1)))
INSERT @tbl (str, nstr) VALUES(@tmpval, @tmpval)
SET @tmpstr = substring(@tmpstr, @pos + 1, len(@tmpstr))
SET @pos = charindex(@delimiter, @tmpstr)
END
SET @leftover = @tmpstr
END
INSERT @tbl(str, nstr) VALUES (ltrim(rtrim(@leftover)),
ltrim(rtrim(@leftover)))
RETURN
END
GO
Anyone have any ideas?
Thanks,
Deb
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
I would like to be able to adjust the multi-value property of a parameter based on the value of another parameter in my report. The controlling paramter would be binary with two options for Single or Multiple selection. I would like my parameter to default to multi-value, which I can do on the screen selection. I have tried to add an IIF statement to the XML code, with no success. Any ideas would be helpful.
Thanks
Does anyone know how to make a query and use an aggregate function? This is my current code...any help would be great.
"SELECT tblTopic.Topic_ID, tblTopic.Subject, MAX(tblThread.Message_date) AS MessageDate, tblThread.Message FROM (tblThread INNER JOIN tblTopic ON tblThread.Topic_ID = tblTopic.Topic_ID) WHERE (tblThread.Message_Date LIKE '%' + @fldGenus + '%' GROUP BY tblTopic.Topic_ID, tblTopic.Subject, tblThread.Message">
Also, How can i limit the query to only bringing up 5 records?
I'm trying to get a datagrid to show the 5 most recent forum posts for a particular category.
Thanks.
Hello, I need to use last() aggregate function in MS SQL Server 2005 but it is not built in.How to replace this functionality?Thanks.
View 4 Replies View RelatedI have three tables, tblschedule, tblresource and tblemployeename.
in tblschedule table there are scheduleID, resourceID and employeeID. In tblResource there are ResourceID and ResourceName. In tblemployeename there are EmployeeID, EmployeeFName and EmployeeLame. I want to have a report that show how many times the resource has been reserved by employee. i would like to have a report. Look like the following:
ResourceName EmployeeFName EmployeeLName (Or use EmployeeName) Number of record.
How to write a query? I use asp.net as front end.
Thank for your help.
Hi
I have a query where I need to use an aggregate function MAX in where clause, I know that MAX cannot be used in a Where clause because it is an aggregate function. Can anyone help me out in writing this query?
SELECT * FROM ACCOUNT_REVIEW AR INNER JOIN
QUESTION_RESPONSE ON
AR.Review_ID = QUESTION_RESPONSE.Review_ID
WHERE (MAX(AR.Review_Date) IS NULL)
I need it asap. Thanks in advance,
K
Hey everyone, I'm looking for a way to insert a count of a set of records into a table and then read that table and produce an XML file from that dataset. The problem that I'm coming across is that when you do this type of query you have to specify one of the values from the table and then get a count for the number of records of that particular range of values.
The table that I am trying to get the data from will look something like this:
ItemID ModuleID Description ......1 2869 blah blah blah2 2869 blah blah blah3 2869 blah blah blah4 2690 bit bit bit5 2690 bit bit bit6 2690 bit bit bit
So I count the 2869's and 2690's and place the ModuleID and the count of the ItemID's in another table.
Then I need to extract the data from the table and put it into an XML file that is readable by the ReadXML method in ASP.NET.
So far I've got the SPROC to do only one record at a time but I would like one that does the whole table rather than one at a time using a parameter.
I am trying to write an update statement based on an aggregate and it will not let me. Please find below the SQL.
update abtimesummary
set hours = sum(a.hours)
from abtimestore a
join abtimesummary b
on (cast(a.weekno as varchar(10)))+'-'+(cast(a.empno as varchar(10))) = b.summaryid
and this is the error message:
Server: Msg 157, Level 15, State 1, Line 2
An aggregate may not appear in the set list of an UPDATE statement.
Can someone tell me how to get round this please?
Many thanks
hi there,
I have a query that works on sybase and want to make it also works on SQL Server.
The problem is that in this query I 'm using a subquery in an aggregate function.
It seems that SQL Server unlike Sybase doesn't support the use of subquery in aggregate function.
How can I overcome this problem.
Thanks,
Fady
I am working on a view in SQL Server 2005.
I am trying to get a list of the number of sessions each user had by user. I tried doing it this way, but
SELECT userid, MAX
((SELECT COUNT(DISTINCT sessionId) AS SESSIONCOUNT
FROM dbo.Sessions AS OD
HAVING (sessionId = O.sessionId))) AS MAXSESSION
FROM dbo.Sessions AS O
GROUP BY userid
but it throws an error 'Cannot perform an aggregate function on an expression containing an aggregate or subquery.'
Is there an elegant solution for this?
Thanks,
Hello,
I column that calculated at run time in insert , can i gruop by this column,the new one that not exist yet
I have a table like this below:
<PRE>
Page Book Release MaxPages
1234ABC A1
1234ABC B2
9999ABC D1
9999ABC E2
7777ABC A1
7777ABC C2
</PRE>
I want to select every page of the book, but only the highest release of that page.
Something Like:
Select Book, Page, Max(Release), MaxPages
From Table
But I can't quiet figure it out.
Thanks for any help.
If you use Coalesce with Count will it return all values even when null? Reason I pose this question to you is that I am running the below query and am getting escalated results than what should be returned. 1st stop on the debug train is how does Coalesce handle it....for example Boston should return only 143 but the query retunrs 194 for Boston?
Code:
Select
Count(NumOnsite),
originatingCity,
Coalesce(Convert(varchar(4000),NewspaperNames), Convert(varchar(4000),MagazineNames)) As PaperNames
From readytoshipOffsite
Group By originatingCity, Coalesce(Convert(varchar(4000),NewspaperNames), Convert(varchar(4000),MagazineNames))
Why aren't we getting proper MAX(DOJ) value in Weird_Maxgroup Column in the below query ? Similar thing happens with MIN() function as well.
Is there something that I am missing here ?
;WITH CTE AS
(
SELECT 1 AS ID, 10000 AS SALARY,GETDATE() AS DOJ
UNION ALL
SELECT 1, 13000,GETDATE() - 10
UNION ALL
SELECT 3, 190000,GETDATE() + 10
[Code] ....
Hello,
I want to count how many occurences their is of each date that is returned by my sql query. I am not sure how to add the aggregate function code to my query I know how to just tell it to count all records, but not to tell it to count for each group of dates. For example I want it to count how many times 5/6/08 shows up in the returned results and so on. Here is my query I currently have. Any help would be greatly appreciated! Thanks!
The enc_timestamp is my date field.
Select a.template_id, a.enc_timestamp, a.created_by, b.first_name, b.last_name, b.last_name +', ' + b.first_name as fullname
From template_audit a
Join user_mstr b on a.created_by = b.user_id
GROUP BY a.template_id, a.enc_timestamp, a.created_by,b.first_name, b.last_name
Having a.template_id IN (543,3172,3031,3030,3134,3135,3171,1401,1937,3985,3173,2320,57,849,1775,1400,1747,3695,3957,3750,3954,3027,3241)
ORDER BY a.enc_timestamp, b.first_name, b.last_name;
Thanks in advance,
Sherri
Hi guys,
Does anybody know a convenient way to return the product of a column, similar to something like the 'sum' function?
If I have a table of form id-date-value, I'd like to do something like:
select id, date, product(val)
If not, does anyone know of a way one could structure this as a subquery?
If all else fails, I suppose I'll have to resort to a loop or cursor, but I'd rather not.
Any help would be much appreciated.
I am trying to use the following syntax and it is saying I can't use an aggregate function in a subquery. I can't use a GROUP BY in this case because if another field in the project table (such as status) is different, that project will show up twice.So in this case I am using this syntax to show the most recent quote within the project.
SELECT PROJECT.*, QUOTE.QuoteDate, QUOTE.QuoteCode
FROM PROJECT LEFT JOIN QUOTE ON PROJECT.ProjectID = QUOTE.ProjectID
WHERE QUOTE.QuoteDate=(SELECT Max(Q.QuoteDate) FROM QUOTE Q WHERE Q.ProjectID = PROJECT.ProjectID);
My goal here is to show the most recent quote within each project (there can be multiple revisions of a quote within each project). I want to show other fields such as the status of the quote, but if the status is different between quotes, the GROUP BY on that field will cause it to be listed more than once. All I want to show is the most recent quote for each project.
I have a query that I need to group by by using the aggregate function using MSSQL...
I want to be able to group the following columns into ONE line:
AddedDescription, OurRef, MaterialName, StockFamily, DateCreated, WJCStatusID AND THEN have WeightToSend Summed for all lines that are grouped above.
Hi,
I just started database class
Today is the first day i'm writtng code in sql
SO when i try to run this code
SELECT CUSTOMER.CUS_CODE,CUS_BALANCE, SUM(LINE_UNITS*LINE_PRICE) AS TotalPurchases
FROM CUSTOMER, INVOICE, LINE
WHERE CUSTOMER.CUS_CODE=INVOICE.CUS_CODE AND INVOICE.INV_NUMBER=LINE.INV_NUMBER
GROUP BY CUSTOMER.CUS_CODE;
It says "You tried to execute quiry that does not include the specified expression 'CUS BALANCE' as a part of aggregate function.
Please help me to fix it.
I have made an aggregate function sql (as far as I understand).I need the sum but also the features column. But I can only read one column in the select.Here is the select trying to read two columns:
select oitems.catalogid,oitems.features, sum(oitems.numitems) as SumOfItems from oitems
here is the error:
[Microsoft][ODBC Microsoft Access Driver] You tried to execute a query that does not include the specified expression 'features' as part of an aggregate function.
...anyone?
Hi,
I've the following query:
select F_Mode, Issue_Count, Sum(Issue_Count) as IssueSum, milestone from rpt_fact_Paretos
Group By F_Mode having milestone = 'SDS'
Sample Data:
F_Mode Issue_Count milestone
Fail1 5 SDS
Fail2 6 SDS
If the above query is executed, the resultset is:
Fail1 5 5 SDS
Fail2 6 6 SDS
Question: I'm not getting the SUM of Issue_Count. I agree that I'm using F_Mode as Group By and hence the result. But if I use milestone as Group By I won't get all the F_Mode in the result set.
I'm looking for a result like this:
Fail1 5 11 SDS
Fail2 6 11 SDS
How can I achievce this?
Thanks in advance,
SD
SELECT [LastNameOfProfessor], avg(ProfessorRating) AS [Average] FROM [Table1] GROUP BY [LastNameOfProfessor]
How would I order this by [Average]?
Problem 1:
Suppose I have a table
T( A, B, C, D, E )
I want to retrieve D, E for all rows which have minimum C when we do a group by on A and B. The query would look something like
SELECT D, E FROM T HAVING C = MIN( C ) GROUP BY A, B
Unfortunately, SQL server gives the error that D, E are not in a group by clause. One way is:
SELECT T.D, T.E
FROM
T,
(
SELECT A, B, MIN( C ) AS F FROM T GROUP BY A, B
) AS T1
WHERE
T.A = T1.A AND
T.B = T1.B AND
T.C = T1.F
What I want to know is whether there is a simpler way of doing this or not, kinda like the first illegal query.
Problem 2:
Suppose in the query
SELECT A, B, CASE WHEN C = 'A' THEN 1
WHEN C = 'B' THEN 2 END ORDER
I want to do MIN( ORDER ). The simple way would be
SELECT A, B, MIN( CASE WHEN C = 'A' THEN 1
WHEN C = 'B'' THEN 2 END )
But this gives an error. There is a way:
SELECT T.A, T.B, MIN( T.C ) FROM
(
SELECT A, B, CASE WHEN C = 'A' THEN 1
WHEN C = 'B'' THEN 2 END AS C
) AS T
but I want to know if there is a simpler way to do this (kinda like the first illegal query).
Regards,
id
hi how do i write a custom aggregate function or select query.I have Table name MemberDetail where which has two column Memberid and WokingDay.In this table same member could have multiple working days. i want select query that will return single row for each member and his/her quama separated working days. without using cursor. how do i do that.
eg
Table MemberDetail
MemberID WorkingDay
M1234 12
M1234 10
M1555 02
M1555 15