Multiple Datasets But Needs To Be Tied Together
Aug 29, 2006
I am needing to take data from one data set that consists of a list of parts and their stock information. Then I am needing to show any transactions that the individual parts may have had during the time that user defined through the filters.
This requires me to have two data sets since I can't do a join between the stocking information and the transactions due to the fact that it is very possible that every part won't have a transaction for each month of each year. Doing a left join still filters down the data too much so thus the need for two data sets.
I have these parameters:
Vendor, Year, Month, Type of request
Vendor and Type of Request is handled through StockInfoDataset. I then need to update the table showing 0 or transaction amount from TransactionDataset filtered by the ItemNumber and WarehouseCode that is in StockInfoDataset. Since it seems List and Table only allow one dataset in them, I am at a loss as to how I would go about doing this.
Explaining this is quite difficult in a forum post, but hopefully someone would be able to shine some light on possibly avenues to follow here....thank you in advance.
Josh
View 3 Replies
ADVERTISEMENT
Oct 27, 2007
Table 1
stock
stock_id
cat_id
stock_name
is_fund
Table 2
Fund_contents
fund_id
stock_id
I need to find out all the stock_id's from the stock table that are associated with 2 different fund_id's in the second table and the stock_id's in the first table have to have is_fund = 0 from the stock table
any ideas?
View 3 Replies
View Related
Jun 6, 2008
I'm a total newb to SQL so I apologize if I butcher the description of what I'm looking to do :) Hopefully the example makes more sense. Is it possible for a single record in 1 table to contain relationships to several records in a different table?
What I've got so far is 2 tables - Hardware and Software, with ID Specifying primary keys HardwareID and SoftwareID respectively. the hardware records are for computer details and the software obviously are for programs. What I need to be able to do is pull up a hardware record and be able to see what software is installed on it, and vice versa pull up a software record to see which computers it's installed on. The problem I'm running into is that a computer can have multiple programs installed on it and a program can be installed on multiple computers, so I don't know how to create that relationship to account for that.
What I'd like to see is in the Hardware table a column for SoftwareID that has a foreign key relationship to the SoftwareID field in the Software Table, and vice versa....My question though is is that possible to do and have potentially multiple separate records it links to from that same column field? I might have a computer with say Windows XP Pro, Office 2003 Standard, Adobe Acrobat 8 and a proprietary rate calculator program that i need each to be displayed with their details when I open that computer's record. Or on the software side if I need to see which computers a license is already installed on then I want to make sure I can pull up the full list of computers.
And finally if what I'd like to do isn't possible as I described it...any recommendations for a better way?
Thanks all for the help!
View 3 Replies
View Related
May 31, 2007
I have a report that I have created with multiple subreports and datasets. There should be a better solution so I am asking the question here.
The report should display like this:
Object
Object Title
Budget
Curr-Spent
Ytd-Spent
Ytd-Encum
Post-Ytd
Balance
% Remaining
4100
EMPLOYEES
$380.00
$250.93
$343.67
$0.00
$0.00
$61.33
15.94%
4102
EMPLOYEES - TEMPORARY
$149.00
$110.75
$139.70
$0.00
$0.00
$47.30
30.16%
4201
EMPLOYEE BENEFITS
$138.00
$73.16
$12.60
$0.00
$0.00
$32.40
25.28%
Each column represents another dataset.
Each column right now is a subreport so I can use the object as a parameter to the subreports dataset. Each column needs to have the object as a parameter.
Is there a way I can pass a field from the first dataset as a parameter for the next dataset without using subreports?
View 4 Replies
View Related
Mar 28, 2008
I have multiple different data regions on one report body. I need to be able to arrange the a few of the data regions so that they are grouped together and print together on same page. I've tried using a list around the data regions that I want to group together, but the list data region needs to have a data set specified and it only allows one to be specified.
Has anyone tackled this before?
View 5 Replies
View Related
Apr 4, 2008
I have three datasets that are currently displaying data in three side-by-side-by-side tables. This gives the appearance of one large table were all rows match up nicely. Now, I need to somehow calculate the sum of those rows values across and display that value as a calculated sum at the end of each row. How can I access the values of each column from those three different tables in order to be able to add them together for each detail row. Or is this just a dream? Thanks in advance....Using SQL Server 2005. The backend queries that create those datasets are MDX and trying to manipulate those to get one dataset back will be a pain. That's why, I am hoping that there is a front end solution to this.
View 1 Replies
View Related
Nov 17, 2014
I have 3 tables pointing to 3 different datasets on my report.
How Can I take the totals from Each Table(Dataset) and add them together for a Grand Total?
View 3 Replies
View Related
Nov 26, 2007
My company is implementing a multilingual solution for our application, so naturally the reports must follow. Every report I create has 2 datasets. It seems to me that the first dataset translates appropriately based on the browser's language setting, but the second dataset disregards the locale and just displays things in en-US. I've even created a sample report that accesses the exact same columns from the exact same view and dataset1 returns the correct language, but dataset2 returns en-US.
The report's language is set to =iif( User!Language = "fr-CA", "fr-CA", "en-US"), but I've also tried just setting it to = User!Language or leaving it at Default just to see if that would work.
Has anyone come across this before and been able to find a work-around?
Thanks!
mmat
View 2 Replies
View Related
Apr 15, 2008
Hello, I'm at a loss with this problem....
I have written many reports with multiple datasets but today I have something bizarre happening. I have three stored procedures (datasets) in this report. This is a rolling twelve month report that looks at three numbers (restraints, census, and percent of census) by month and year...pretty simple. The first data set is for the graph for all twelve months. The second and third data sets are broken out by MonthNum in matrix tables to show the first and then second six months in separate tables for displaying purposes...so that that they don't have to scroll far over to the right since I'm printing all the three values per month.
This should be no problem. What's happening is that when I refresh the report not all three datasets are displaying properly. Some times the data in the graph shows and some times it doesn't. Another odd thing is that in my matrix tables the restraint number and then percent values sometimes double or sometimes they are 0. What makes it even more strange is the census number is always there and is always accurate.
All the aggregates are calculated in the T-SQL stored procedure. So, all I'm doing in RS is displaying the values. It almost appears to be cycling through the datasets when I refresh the report. Other than the fact that the census value is always there.
I rebuilt the report with only the graph...no problem. Once I add another data set, every other time I refresh the report the graph has no data. I can't imagine what I'm missing as I've done this numerous times.
Has anyone come across anything like this?
Thanks!! Jamie
View 3 Replies
View Related
Aug 20, 2005
Is it possible to incorporate data from 2 datasets into a single chart? For example I have 1 set of data from 1 db which allows me to display datapoint "A" by week. I have a second dataset from another db which allows me to display datapoint "B" by week. I'd like to plot each of these separate datapoints on a single chart with the x axis being week and the y axis being a stacked bar chart incorporating both A and B values as individual data series. Further, assuming this is possible, is it then possible to have 1 series displayed as an area while the 2nd series is a column or line?
View 9 Replies
View Related
Mar 22, 2007
I have a report with two datasets, DS1 and DS2, which contain the same data fields, but with different values. Like so:
DS1 = sales
salesperson sale_number amount
John Smith 1 $100
John Smith 2 $105
Mary Jane 3 $98
John Smith 4 $275
Mary Jane 5 $92
DS2 = sales with price overrides
salesperson sale_number amount
John Smith 1 $100
Mary Jane 3 $98
Mary Jane 5 $92
Now what I want to do is see how the salespeople are doing. I can use either dataset and get great results independently:
Sales Results:
Salesperson Number of Sales Total Amount
John Smith 3 $480
Mary Jane 2 $190
or
Sales results with price overrides:
Salesperson NumSales with Over Total Amount
John Smith 1 $480
Mary Jane 2 $190
Now what I really want to do is a combo table like so:
Salesperson NumSales with Over Number of Sales %Overrides
John Smith 1 3 33.3%
Mary Jane 2 2 100%
I can not figure out how to do this. If I create a table that has DS1 as its datasource, I need to access DS2 for a count. So I try this for the NumSales with Over:
= count((Fields!sale_number.Value,"DS2"))
This just repeates the total number of sales in DS2, which is 3, for each line; not separating them out by salesperson.
If I try something fancier such as:
=count((Fields!sale_number.Value,"DS2", (Fields!Salesperson.Value,"DS2") like =(Fields!Salesperson.Value))
The report won't even run.
I want to do something along those lines. Does anyone have any ideas how to do this? I've considered subqueries to use salesperson as a filter, but the datasets are so large that the reports end up taking forever to run. I've tried using iif, but it doesn't seem to like using a field from a second dataset. I even tried to use the embedded VB code box to write a function, but then I couldn't pass the full array from the secondary dataset to the function (I could pass it from DS1, but not DS2).
I know this is incredibly simple, but this noob can't figure it out. If anyone has any suggestions I would deeply appreciate it.
Thank you,
cmk8895
View 1 Replies
View Related
May 8, 2008
Hey guys,
I am pretty new to reporting software and I was just wondering in reporting services 2005 when working with multiple datasets and data connection string in order to populate text boxes if the data is a number it is prefixed with SUM at the start of the expression and if it is text it is prefixed with FIRST even though it is just for one value.
I was wondering if this is normal or have I messed up somewhere?
Many thanks.
View 1 Replies
View Related
Jan 23, 2008
Hi,
I had a procedure which returns 5 result sets. Now i want to export 3 results sets in 1 excel sheet and the remaining 2 resultsets in another excel sheet. Can we do this in reporting services.
ThanksDinesh
View 6 Replies
View Related
Oct 4, 2007
Hello and thank you for the help in advance.
I know this has to be possible maybe I am just missing somthing.
I am creating a matrix report which will compare year by year quotes to orders The issue is quotes and orders each have their own dataset. I will be pivoting on JobType which is in both datasets and spelled the same. Is there a way to do this or will I have to figure out how to union the tables? If not possible why does it allow you to name the dataset in the expression?
Thanks, Leo
View 1 Replies
View Related
Jan 14, 2008
A report I am currently working on is a payslip report.
This report has multiple tables on the page, each linked to their own specific dataset.
Eg I have Taxable Allowances table linked to a dataset that returns information relating to any taxable allowances for an employee, then Non-Taxable allowances, Deductions and so on...
Taxable allowance dataset example
SELECT
TA.TaxableTrDesc,
TA.TaxableTrText,
TA.TaxableSubQty,
TA.TaxableTrRate,
TA.TaxableTrFact,
TA.TaxableSubTtl
FROM
Employee E
INNER JOIN TransCurrentMaster TCM ON E.EmployeeCode = TCM.EmployeeCode
CROSS APPLY udfReportTaxableAllowances(E.EmployeeCode, TCM.PaySequence, ) TA
WHERE
E.EmployeeCode IN (@EmployeeCodeParameter)
AND TCM.PaySequence IN (@PaySequenceParameter)
The report works fine when you select one employee.
Currently when you try to select more than one employee, all the employee results are displayed in the tables, for example, Taxable Allowance table contains all taxable allowances records for all employees on the one page...
I'm not sure how I can amend this report so that it is able to be run for multiple employee records...
Any ideas, thoughts, feedback would be much appreciated..
Cheers
View 4 Replies
View Related
Jun 17, 2015
I want to use multiple datasets in a table and wants to do the full outer join on the two datasets in the same table. For example, my two datasets are:
I want to display a ssrs table like:
Both the datasets are coming from different sources. So I cannot integrate them at sql query level.
View 4 Replies
View Related
Sep 27, 2015
My report has two data sets that hold inventory from two different departments.
ds_DeptA and ds_DeptB
I have a table, that pulls the DeptB status of DeptA record and displays it. This returns empty when the lookup fails to make a match, which is fine. Typically means DeptB does not have the record yet. I need to count these empty (null) feilds and populate it in a Text box outside of the table.
I just can't figure out the syntax with multiple datasets. I can't use the lookup expression as part of the count expression since the count expression is not contained in a table that has a dataset.
table: ds_DeptA
fields:
ID
Name
date_set_to_DeptB
<<Expr>> =Lookup(Fields!ID.Value,Fields!DeptA_ID.Value,Fields!DeptB_Status.Value, "ds_DeptB")
View 3 Replies
View Related
Mar 27, 2012
We have a report that was created in SSRS 2008 R2 that has 3 tables with different datasets that share a common ID that I want to use to group them.
If we run the report passing only a single value for the grouped parameter then the report works perfectly. What we need is for this report to allow multiple values to be selected for this parameter and for the report to run as if the user had selected each value one at a time and run the report with page breaks in between. Currently, when we pass multiple selected values for the grouping parameter the report displays all values for table 1, then all values for table 2, then all values for table three as below:
Table 1:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
....
Table 3:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
But we want it to render like this:
Table 1:
Detail rows for Group Param Value 1...
Table 2:
Detail rows for Group Param Value 1...
Table 3:
Detail rows for Group Param Value 1...
[code]....
The page breaks are needed so that when the report is exported to excel each individual report (by group param) will be on its own uniquely named tab.The report must export cleanly to excel and currently does for the single value passed.
View 5 Replies
View Related
Oct 3, 2014
I have a store procedure in MC400 which I can call from SSMS using the below command:
EXEC ('CALL GETENROLLMENT() ')At serverName
Now this command returns two data sets like:
HA HB HC HD HE
1112
112571ABC14
113574ABC16
114577ABC87
DADBDCDD
1115566VG02
1115566VG02
1115566VG02
I want to generate two different XML files from these two datasets.Is there any way this can be achieved in SSIS or t-sql ?
View 3 Replies
View Related
Sep 23, 2006
I have a situation where for a given customer, their invoices need to be sequentially numbered, without gaps.
Customer A Invoice 1,2,3,4 ...
A-1
A-2
A-3
A-4
Customer B:
B-1
B-2
etc.
The issue is 2 people creating an invoice for the same customer at the same time. Currently I don't assign the Invoice number until the user hits 'Save'. At that time I query for max(invoiceno) against the customer key and simply add 1. it's the last operation prior to saving against the backend.
If 2 users hit Save at the exact time, I'm getting the same (duplicated) Invoice Number.
What suggestions/techniques do you have to resolve this? Would "locking" of the customer record and storing the last highest invoice there play a part?
Thanks,
Peter
View 5 Replies
View Related
Dec 7, 2007
Hey Everyone,
I am trying to create a table that will list data for me. The problem that I have is that my data has been separated across multiple stored procedures. The way I want to display the items are as follows:
title1 title2 title3 title4 title5 title6 title7
item1 item2 item3a item4 item5 item6a item7
item3b item6b
item3c item6c
As you can see, items3 & 6 contain significantly more rows than the others. In order to prevent duplicating items1, 2, 4, 5, and 7, I had to split the statement up into 3 stored procedures; all three procedures take parameters, item 3 and 6 taking item1 as a parameter. How will I display data like that in a report? In the design view, I am only able to use 1 dataset, let alone link them up together.
If this cannot be done, is there a query that I can perform that will omit repeated items? Basically, it will look exactly like about. I thought it was the GROUP BY, but I was way off.
View 9 Replies
View Related
Apr 29, 2015
I have one table with two columns, GUID and PID and another table with three columns, GUID, LastName, and FirstName. For each unique PID, I need to find the PID's that have more than one GUID and then match that with their respective FirstName and LastName from the other table.
Table1
GUID PID
GUID1 PID1
GUID1 PID1
GUID1 PID1
GUID2 PID1
GUID3 PID2
GUID3 PID2
GUID3 PID2
Table2
GUID LastName FirstName
GUID1 Mulder Fox
GUID2 Scully Dana
GUID3 Skinner Walter
So I'm looking for a result like:
PID1 GUID 1 Mulder Fox
----- GUID 2 Scully Dana
View 5 Replies
View Related
Jul 5, 2006
I typically use DataAdapters and Datasets from the toolbox when connecting to a SQL database. Since switching to VS 2005, I am not able to find (or add) these items to the tool box for web site development.
Any ideas on how I can get them back? Or is there a better alternative to retrieving the data so I can process it? Any help or suggestions would be appreciated.
Thank you
View 1 Replies
View Related
Apr 19, 2007
Can anyone advise me on how to view the contents of a dataset in VS dotnet 2003..
I had filled a dataset from a query...But i don know what happens after filling the qry results.It might be helpful if someone tells me to view the contents of the dataset
View 1 Replies
View Related
Jun 6, 2007
hi
i am using older ado datasets in a borland 6 program.
i need to retrieve the data per record count....
example is that i need all 1000 records but i only want to retrieve them 100 at a time....
how will i accomplish this?
View 1 Replies
View Related
Oct 25, 2007
I have become a big fan of the datasets in Visual Studio 2005. I usually create the SQL for each method in the table adapter; however, I am wondering if there is any 'built-in' functions in the C files for sql injection prevention? I have read that using stored procedures is a good method for prevention. Should I be using SP rather than SQL within my methods in the data table?
View 5 Replies
View Related
May 3, 2007
Hi,
Is there any possibility of combining data from two datasets to a single report item. If there is any thing that we can do, can any one please tell me what to do, so that my problem will be solved.
Thanks
Rajeev
View 1 Replies
View Related
Mar 27, 2008
Hi,
I have a table which has over 450,000 records in it, I have now split this into 4 so each table has around 100,000 records in it but I'm still having the problem of the data being returned really slowly.
What I need to do to this data is group it by a code and show the total for each code for every month of the year (this is currently based on one column and selecting the data accordingly). I have created views and put some indexes onto my table but the results are still being returned slowly. Does anyone have any suggestions of how I can speed this up?
Thanks
Gemma
View 5 Replies
View Related
Sep 6, 2007
Hello experts,
I have a report with four different datasets that slice certain record by different days of the week. I can do the individual summing for each dataset by putting a , "datasetname" at in the expression. I also have 4 matrixes in the report that are grouped on certain transactions within each timeslice. My problem is that if I use the dataset name in the fields, the groups get ignored. Do I have to put the dataset name in each group expression? for example, here is my group expression...
Code Snippet
=iif(Left(Fields!TestName.Value,4)="VTAM","VTAM Logon",
iif(Left(Fields!TestName.Value,4)="CICS","VTAM Logon",
iif(Left(Fields!TestName.Value,4)="Shaw","SHAW Main Menu",
iif(Left(Fields!TestName.Value,7)="Inquiry","Inquiry Menu",
iif(Left(Fields!TestName.Value,6)="Search","Search Menu",
iif(Left(Fields!TestName.Value,6)="SEAX A","SEAX Auxiliary Search Menu",
iif(Left(Fields!TestName.Value,8)="SEAX - B","SEAX",
iif(Left(Fields!TestName.Value,4)="STLN","STLN","Other Value"))))))))
Not sure where I put the dataset name in this.
Thanks,
C
View 1 Replies
View Related
Jan 2, 2007
How do you join two datasets in reporting services... one from sql and another from oracle?
Thanks
View 2 Replies
View Related
Aug 8, 2007
Hello all,
I have a report with a table and a chart. It uses dataset1 as the data source.
All works fine.
I create a new dataset called dataset2.
The queries are exactly the same. The only differences between the 2 datasets is the database server and the fact that one of the columns is a smallint (in dataset2) and an int(in Dataset1)
I change the datasetName property of both the table and the chart to use dataset2.
When I run the report I get a conversion error stating that there was an overflow of int2 while using dataset1. I have verified the report is not using dataset1 anywhere. If I delete dataset1 and run the report the error goes away. If I add it back, I get the error again. Why is the report looking at dataset1 if it is not referenced at all in the report? Does SQL RS cache the datasets and verify each when it compiles?
regards,
Bill
View 9 Replies
View Related
Apr 29, 2008
If I have a dataset that has ID and CODE, and another dataset that has CODE and DESCRIPTION, is it possible to relate these two datasets to one another so I put the ID and Code in columns 1 and 2 and then put the related DESCRIPTION in column 3 on the report table layout? In other words, can you "JOIN" two datasets, or must all that be done in the query and create a unified dataset for the report contents?
View 6 Replies
View Related
Mar 8, 2007
Hi All,
I have got two datasets. Some 'normal' rows with state values and an addtional dataset with the translation from state value to plain text (value / text pair).
A table object is attached to the first dataset, but I would like to show the plain text from the second dataset in a group header. So I'd like to do some kind of 'look up in another dataset'.
I wasn't able to find a function that could help me solve this problem. Does anyone has any ideas on this?
Kind regards.
View 6 Replies
View Related
