I'm trying to use multiple where clauses but its not working. I want it to look something like this:
INSERT INTO [USCondex_Development].[dbo].[miamiheraldExceptions]([InvalidEmails], [InvalidAdPrintID], [InvalidPropertyStreetAddress], [InvalidPropertyPrice])
SELECT [AdvertiserEmail],[AdPrintId],[AdvertiserAddress], [PropertyPrice]
FROM [Development].[dbo].[table2]
WHERE advertiseremail is NULL
and WHERE adPrintID is NULL
and WHERE firstinsertdate is NOT NULL
and WHERE propertystreetaddress is NOT NULL
and WHERE propertyprice < 100
I have this sproc. ALTER PROCEDURE dbo.cis_UpdateCourseUserWithGrade @Grade nvarchar, @UaaStudentId nchar, @CourseId int AS UPDATE cis_CourseUser SET Grade =@Grade WHERE UaaStudentId = @UaaStudentId AND WHERE CourseID = @CourseId RETURN the ANE WHERE isn't much liked. How can I update the field with the grade where both of the conditions are true? I'm getting an invalid syntax near @UaaStudentId
If I have a table called "content_hits_tbl" and want to pull information, can't i write something like this:
SELECT COUNT(visitor_id) AS HITS, COUNT(DISTINCT visitor_id) AS VISITORS, COUNT(DISTINCT visitor_id) WHERE visit_type = 0 AS NEW, COUNT(DISTINCT visitor_id) WHERE visit_type = 1 AS RETURNING FROM content_hits_tbl
Can't you have multiple WHERE clauses in the SELECT statement?
Any suggestions would be great. I have been wrestling with it and SQL queries arent my strong area ...
Hi I'm not sure if I have stated my subject line correctly for what I want to achieve, but I will attempt to explain it below.
In addition to what I have in my script below, I also need to include the following clauses:
1. where TransPerPaySequence.FinancialYTDCode like '2007', and e.EmployeeStatusCode like 'CASUAL' and p.PositionGroupCode like 'AC', then instead of using the divisor of 72, it needs to be 35; and
2. where TransPerPaySequence.FinancialYTDCode like '2008', and e.EmployeeStatusCode like 'CASUAL' and p.PositionGroupCode like 'AC', then instead of using the divisor of 72 or 35, it needs to be 31.
I would really appreciate any assistance that can be provided.
Thanks
SELECT DISTINCT pc.PositionClassificationCode, pc.Description AS positionclass, pg.PositionGroupCode, pg.Description AS positiongroup, p.Description AS position, e.PreferredName + ' ' + e.LastName AS employeename, SUM(ha.Quantity) / ((CASE p2.PositionGroupCode WHEN 'AC' THEN 72 WHEN 'AL' THEN 75 WHEN 'EX' THEN 80 WHEN 'MG' THEN 80 WHEN 'SM' THEN 80 END) * (SELECT COUNT(DISTINCT PaySequence) AS Expr1 FROM TransPerPaySequence WHERE (PayPeriodCode LIKE 'EIT') AND (Closed = '1') AND (Description LIKE 'St%'))) AS FTE, (SELECT COUNT(DISTINCT PaySequence) AS Expr1 FROM TransPerPaySequence AS TransPerPaySequence_1 WHERE (PayPeriodCode LIKE 'EIT') AND (Closed = '1') AND (Description LIKE 'St%')) AS payseq FROM HistoricalAllowance AS ha LEFT OUTER JOIN Position AS p ON ha.PositionCode = p.PositionCode LEFT OUTER JOIN PositionGroup AS pg ON p.PositionGroupCode = pg.PositionGroupCode LEFT OUTER JOIN PositionClassification AS pc ON p.PositionClassificationCode = pc.PositionClassificationCode LEFT OUTER JOIN WAP ON ha.WAPCode = WAP.WAPCode LEFT OUTER JOIN Employee AS e ON ha.EmployeeCode = e.EmployeeCode LEFT OUTER JOIN Position AS p2 ON e.PositionCode = p2.PositionCode LEFT OUTER JOIN TransPerPaySequence AS tpps ON ha.PaySequence = tpps.PaySequence WHERE (e.EmployeeCode IN ('83', '739')) AND (ha.AllowanceCode IN ('005', '201', '203', '101')) AND (tpps.FinancialYTDCode LIKE '2007%') GROUP BY pc.PositionClassificationCode, pg.PositionGroupCode, pc.Description, pg.Description, p.Description, e.PreferredName, e.LastName, p2.PositionGroupCode
I came across this structure today and haven't seen it before:
SELECT blablabla FROM T1 FULL OUTER JOIN T2 ON T1.Col1 = T2.Col1 AND T1.Col2 = T2.Col2 ON T3.Col1 = T1.Col1 AND T3.Col2 = T1.Col2 ON T4.Col1 = T1.Col1 AND T4.Col2 = T1.Col2
I need to be able to construct a statement that says something like:
If advertiserTYPE = FSBO Then INSERT INTO [COLUMN1] If advertiserTYPE = BROKER Then INSERT INTO [COLUMN2 If advertiserTYPE = DEVELOPER Then INSERT INTO [COLUMN3]
I've seen lots of entries recommending the use of ISNULL in SQL WHERE clauses, e.g. in a search sproc where users can enter some or all parameters to search a table. Previously I would have used something like:SELECT * FROM MyTableWHERE (FName = @fname OR @fname IS NULL) AND(MName = @mname OR @mname IS NULL) AND(LName = @lname OR @lname IS NULL)So using the neat ISNULL syntax it could be updated to:SELECT * FROM MyTableWHERE (FName = ISNULL(@fname, FName)) AND(MName = ISNULL(@mname, MName)) AND(LName = ISNULL(@lname, LName))Having played around with this I stumbled upon a problem. If one of the fields, e.g. MName, is NULL then that clause will return false since MName = NULL isn't true and you have to use MName IS NULL. Did I miss all the caveats with using ISNULL in this way on fields that can contain NULL or have I missed something else?
So how do you do dynamic WHERE clauses with asp.net? I have a QueryString parameter with a value that will look like this. |1| or |1||2| or |1||2||3| or etc. For each number in the value I want to add an EXISTS function to the WHERE clause. I have accomplished this in T-SQL. But I can't figure out how to bind asp.net control to it. It gives me 'Invalid syntax near the keyword 'ORDER'. I know this has something to do with .net not being able to exaluate the schema properly. So I tried Linq to Sql. Well, so happens that my WHERE clause is pointing to the existance of records in another table which the default install of Linq to Sql doesn't seam to support. I came across this post (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2979081&SiteID=1) that explains how to dynamically query across multiple tables. I tried this and got errors when trying to plug in the additional code. And this still does not let me dynamically add where clauses. I tried the who Predicate thing and ran into the same problem where I can't reference the existance of values in foreign tables. Here is my sproc. Can anyone tell me how to get this into a asp.net environment. I also do NOT want to auto-generate fields in my GridView.ALTER PROCEDURE dbo.Item_SelectByFilters @Item_Category_Id int = NULL, @ItemSpecificValueIdList varchar(100) = NULL, @debug bit = 0 AS DECLARE @sql nvarchar(4000), @paramlist nvarchar(4000) SELECT @sql = 'SELECT Item_Id, Number, Primary_Item_Category_Id, Secondary_Item_Category_Id, Engineering_Document_Id, CategoryIdList FROM Item WHERE (1 = 1)' IF @Item_Category_Id IS NOT NULL SELECT @sql = @sql + ' AND Item.CategoryIdList Like ''|'' + CONVERT(varchar, (@xItem_Category_Id) + ''|''' IF @ItemSpecificValueIdList IS NOT NULL BEGIN WHILE @ItemSpecificValueIdList <> '' BEGIN DECLARE @StartLocation int SELECT @StartLocation = CHARINDEX('-', @ItemSpecificValueIdList, 1) IF @StartLocation <> 0 BEGIN DECLARE @EndLocation int SELECT @EndLocation = CHARINDEX('|', @ItemSpecificValueIdList, @StartLocation + 1) IF @EndLocation <> 0 BEGIN DECLARE @ValueLength int SELECT @ValueLength = @EndLocation - @StartLocation - 1 DECLARE @ValueBetween varchar(10) SELECT @ValueBetween = SUBSTRING(@ItemSpecificValueIdList, @StartLocation + 1, @ValueLength) IF @ValueBetween IS NOT NULL SELECT @sql = @sql + ' AND EXISTS(SELECT Item_Specific_Value_Id FROM Item_Specific_Value WHERE Item_Id = Item.Item_Id AND Item_Specific_Value.Item_Specific_Value_Id = ' + @ValueBetween + ')' END END SET @ItemSpecificValueIdList = SUBSTRING(@ItemSpecificValueIdList, @EndLocation + 1, len(@ItemSpecificValueIdList) - @EndLocation) END END SELECT @sql = @sql + ' ORDER BY Item.Number' IF @debug = 1 PRINT @sql SELECT @paramlist = '@xItem_Category_Id int' EXEC sp_executesql @sql, @paramlist, @Item_Category_Id
Here is another project that seams to be the same as my previous post but a little simpler. http://forums.asp.net/t/1263330.aspx My Item_Category table is self referencing. I have a list of category Ids in a particular order representing the tree of categories from the current category to the top. For example: 1 - Fasteners, 4 - Screws, 12 - Sheet Metal Screws or the reverse. I need to translate this so I can bind a cookie crumb type control to it. ie. Fasteners > Screws > Sheet Metal ScrewsI originally accomplished this like so; Dim q = From ic In itemdc.Item_Category _Where valueId.Contains(ic.Item_Category_Id) _ Select Id = ic.Item_Category_Id, ic.Name But found that this does not order them properly. Remember that the list of Ids is in a particular order. I need a query to result to the below. I was using a horizontal DataList control as the cookie crumb control. Again, I am trying to do this with Linq to Sql without using Stored Procedures even though I am the DBA as well. Or is there some other better way to do this?
Id Name Sort
1 Fastener 1
4 Screws 2
12 Sheet Metal Screws 3 Finally, as I mentioned in my previous post, I accomplished this concept with a stored procedure but then the asp.net controls could not recognize the schema, hence I could not bind the controls to the data source control.
I have an existing SPROC which works the way it should do and was difficult to construct. But now I need to add 1 more condition and hopefully that should be it however I am struggling how to do this. Here is a snip of the existing SPROC.
quote: IF @columnName = 'Rating - Fire' OR @columnName = 'Rating - PPE' OR @columnName = 'Rating - Reactivity' OR @columnName = 'Rating - Health' BEGIN SELECT @totalRecords = (SELECT COUNT(p.[SID]) FROM S_Summary p INNER JOIN S_Detail detail ON detail.SID = p.SID WHERE CASE @columnName
[code]...
so this works fine but now I need to add 1 more thing..if a new parameter is supplied (lets call it @stringBranch), then I want to join another table and also match the param value to a field in that table along with any existing WHERE conditions being applied to this:
quote: WHERE (@columnName IS NULL AND @columnValue IS NULL) OR CASE @columnName WHEN 'Rating - Fire' THEN detail.F WHEN 'Rating - PPE' THEN detail.P
I am trying to wrap my WHERE clause with an IF or a CASE but cannot seem to get it to work. This is what I am trying:
WHERE CASE WHEN EVENT_TYPE='d' THEN (link_inc.incident_id = 10000005) AND (B.incident_id <> 10000005) AND link_rsn.link_rsn_sc = 'CHANGE' AND B.incident_id > 10000000 ELSE (link_inc.incident_id = 10000005) AND (B.incident_id <> 10000005) AND link_rsn.link_rsn_sc = 'CHANGE' AND B.incident_id > 10000000 AND act_type.act_type_sc <> 'CLOSURE' END ORDER BY B.incident_id DESC, act_reg.act_reg_id DESC
Basically I want to run a different WHERE clause based on a value (EVENT_TYPE). The error message I am getting is: Incorrect syntax near '='.
I have a table, basically consisting of products and their prices. I want to select some products, then sort them by price in ascending order BUT putting prices of zero at the bottom. (e.g. 5.99, 8.99, 10.99, 0.00, 0.00)I thought I'd be able to do something like:ORDER BY (price != 0), pricethinking that it would sort rows according to whether the condition was true or not, and then by price, but MSSQL doesn't seem to allow this. should this work, or is there another way around this? One solution would be to load the values into a table object and sort them using that, but I'd rather do all of this in SQL if possible, for speed.any suggestions?thanks!
I have a Master table with a OrderNbr which is also contained in the Detail table.
It's a 1 to Many relationship, respectively.
I want to update the MASTER.FinalizedDate using a "select top 1 FinalizedDate order by FinalizedDate DESC" from the Detail table but the clause is ALL the Status have to be "F". So OrderNbr 12345 should not get updated because it contains a 'O'. OrderNbr 67899 should get updated in the Master table to 2/26/2013 because all have a 'F' and the last date to post is the official finalized date.
Here is what I came up with.......so far, but not sure how to work in the Status piece on 1 to M.
The rub here is that even if one row has the 'O' status I want to ignore the update. If all have the 'F' then I want the udpate to happen.
Update MASTER Set FinalizedDate = (select top 1 d.FinazliedDate from Detail d where m.OrderNbr = d.OrderNbr and d.Status not in ('O') Order by FinalizedDate DESC) From MASTER m
How do I not include all 3 rows for OrderNbr 12345 because one row has the Status "O" in the DETAIL table?
Here are the table looks........
MASTER OrderNbr Ytotals Ztotals Xtotals Finalized Date 12345$1,500$1,500$1,200 67899$1,200$1,100$900
In a UDF, how is the best way to extend a query with additional clauses based on expressions? The user input here is used to refine the basic query by introducing additional clauses. Is there something like the following?
-- The basic query SELECT column FROM table WHERE clause
-- Additional clause, only appended to query -- if expression evaluates to true IF @parameter <> default_value BEGIN AND additional_clause END
Right now I'm using CASE like the following, but it necessarily makes the query longer. Is there a more efficient way?
-- The basic query
SELECT column FROM table WHERE clause
-- Additional clause, should only effect result -- set when the parameter is not default_value AND table.column = CASE @parameter WHEN default_value THEN -- identity, table.column=table.column, -- should have no effect other than just a long query table.column ELSE @parameter END
hi, i'm using Access 2007 and i'm trying to join two selects and create two new columns[complete and not complete] where 'x' denotes a hit was made. i will use this later for grouping. here is my code so far. thanks.
SELECT tblOutlookTask.TaskSubject, tblOutlookTask.PercentComplete, tblOutlookTask.ID FROM tblOutlookTask WHERE (((tblOutlookTask.PercentComplete)=100))
SELECT tblOutlookTask.TaskSubject, tblOutlookTask.PercentComplete, tblOutlookTask.IDFROM tblOutlookTask WHERE (((tblOutlookTask.PercentComplete)<>100))
Hi, I hope some one can help me. I have a stored procedure (Microsoft SQL 2005 Express Edition) that I want users to be able to dynamically set the, group by, order by (@orderby) and where clause (@where). I have managed to get the group by to work but can't seem to get the where and order by to work. Here's my stored procedure. Any idea how this can be done? ALTER PROCEDURE [dbo].[sp_aggregate] -- Add the parameters for the stored procedure here @finfileid int, @phaseid int, @supplierid int, @measurementid int, @roleid int, @groupby int, @orderby int, @where int AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- Insert statements for procedure here SELECT MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsMonthId) AS ProjFinFileMonthItemsMonthId, SUM(ProjectFinFileMonthItems.ProjFinFileMonthItemsValue * ProjectFinFileMonthItems.ProjFinFileMonthItemsRate * ProjectFinFileMonthItems.ProjFinFileMonthItemsAvail / 100) AS total, MAX(ProjectFinFileItems.ProjPhaseId) AS phaseid, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS deliveid, MAX(ProjectFinFileMonthItems.SupplierId) AS supplierid, MAX(ProjectFinFileMonthItems.ProjFinFileItemsId) AS ProjFinFileItemsId, MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsId) AS ProjFinFileMonthItemsId, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS ProjDeliveId, MAX(ProjectPhases.ProjectPhaseName) AS ProjectPhaseName, MAX(Suppliers.SupplierName) AS SupplierName, MAX(ProjectFinFileMonthItems.RoleId) AS RoleId, MAX(Measurements.MeasurementName) AS MeasurementName, MAX(ProjectFinFileMonthItems.MeasurementId) AS MeasurementId, MAX(ProjectFinFileMonthItems.FinDataTypeId) AS FinDataTypeId, MAX(FinDataTypes.FinDataTypeName) AS FinDataTypeName, max(ProjectFinFileItems.FinFileId) as finfileid FROM ProjectFinFileItems INNER JOIN ProjectFinFileMonthItems ON ProjectFinFileItems.ProjFinFileItemsId = ProjectFinFileMonthItems.ProjFinFileItemsId LEFT OUTER JOIN FinDataTypes ON ProjectFinFileMonthItems.FinDataTypeId = FinDataTypes.FinDataTypeId LEFT OUTER JOIN Measurements ON ProjectFinFileMonthItems.MeasurementId = Measurements.MeasurementId LEFT OUTER JOIN Roles ON ProjectFinFileMonthItems.RoleId = Roles.RoleId LEFT OUTER JOIN ProjectPhases ON ProjectFinFileItems.ProjPhaseId = ProjectPhases.ProjectPhaseId LEFT OUTER JOIN Suppliers ON ProjectFinFileMonthItems.SupplierId = Suppliers.SupplierId /*dynamic where clause needs to go here */ /*dynamic group by clause */ GROUP BY CASE when @groupby=1 then ProjectFinFileItems.projphaseid --phaseid when @groupby=2 then ProjectFinFileMonthItems.supplierid -- supplierid when @groupby=3 then ProjectFinFileMonthItems.measurementid -- measurment when @groupby=4 then ProjectFinFileMonthItems.roleid --role else ProjectFinFileMonthItems.ProjFinFileMonthItemsId END /*dynamic order clause needs to go here */ END cheers Mark :)
I have a web page which passes back parameters to a stored procedure. From the web page the user selects different clauses for the 'where' criteria. Based upon the number of clause items in the parameters sent back, a select statement is built and executed. In the stored procedure I have many if statements to chose the correct sql statement. As the no of clauses in the where statement can vary, it can become messy script. Has anyone dealt with this scenario. What is the best strategy ?
A simple illustation of this is as follows A statement with two clauses :-
Select * from Sales where user = 'John' and country = 'England' A statement with three clauses :- Select * from Sales where user = 'John' and country = 'England' and County = 'Staffordshire'
The stored procedure would except three parameters and would build a string based on the number of actual where clases sent back
I have a complex SQL query against multiple tables that ideally would be best used as a stored procedure.
I know of and have read about creating named parameters and setting the parameters' values in ASP just before issuing an execute command via the Command object. What I'd like to do is assign the text of the filter and sort clauses to the parameters. Not the values, but the entire string, such as
"WHERE lastname LIKE 'A%' "
"ORDER BY lastname "
I need to assign the entire clause because the query may or may not use a particular clause.
I have experimented. However SQL treats the parameter as a literal string rather than part of the SQL query itself. Is there another technique that I may use to accomplish my goal?
Thanks in advance for your opinion, suggestion, criticism, etc.
dbo.TAG ON dbo.KALENDER.KALENDER_ID = dbo.TAG.KALENDER_ID INNER JOIN
dbo.STUNDE AS s ON dbo.TAG.TAG_ID = s.TAG_ID
WHERE ((SELECT MONTH(s.datum_zeit) AS Expr1
FROM ) =
(SELECT MONTH(GETDATE()) AS Expr1) - 2) AND
((SELECT YEAR(s.datum_zeit) AS Expr1
FROM ) =
(SELECT YEAR(GETDATE()) AS Expr1))
ORDER BY s.STUNDE_ID
... but this causes syntax-errors. I don't understand why this query works fine in the query editor but then gets automatically "destroyed" by the view editor. Do i have to use more statements to get the working query to run inside a view?
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car where Price=@Price1 or Price=@price2 or Price=@price=3 and where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3 and where Model=@Model1 or Model=@Model2 or Model=@Model3 and where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
I am trying to create a report using Reporting Services.
My problem right now is that the way the table is constructed, I am trying to pull 3 seperate values i.e. One is the number of Hours, One is the type of work, and the 3rd is the Grade, out of one column and place them in 3 seperate columns in the report.
I can currently get one value but how to get the information I need to be able to use in my reports.
So far what I've been working with SQL Reporting Services 2005 I love it and have made several reports, but this one has got me stumped.
Any help would be appreciated.
Thanks.
I might not have made my problem quite clear enough. My table has one column labeled value. The value in that table is linked through an ID field to another table where the ID's are broken down to one ID =Number of Hours, One ID = Grade and One ID= type of work.
What I'm trying to do is when using these ID's and seperate the value related to those ID's into 3 seperate columns in a query for using in Reporting Services to create the report
As you can see, I'm attempting to change the name of the same column 3 times to reflect the correct information and then link them all to the person, where one person might have several entries in the other fields.
As you can see I can change the names individually in queries and pull the information seperately, it's when roll them altogether is where I'm running into my problem
Thanks for the suggestions that were made, I apoligize for not making the problem clearer.
Here is a copy of what I'm attempting to accomplish. I didn't have it with me last night when posting.
--Pulls the Service Opportunity
SELECT cs.value AS "Service Opportunity"
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE ca.name = 'Service Opportunity'
--Pulls the Number of Hours
SELECT cs.value AS 'Number of Hours'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Num of Hours'
--Pulls the Person Grade Level
SELECT cs.value AS 'Grade'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Grade'
--Pulls the Person Number, First and Last Name and Grade Level
SELECT s.personnumber, s.lastname, s.firstname, cs.value as "Grade"
FROM student s
INNER JOIN cperson cs ON cs.personid = s.personid
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE cs.value =(SELECT cs.value AS 'Grade'
WHERE ca.attributeid = cs.attributeid AND ca.name='Grade')
I have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
I'm trying to get some XML data into SQL Server but i ran into problem when inserting the data (multiple orders with multiple order details) using a single sproc. Is it possible, or do I have to do in some other way? :confused:
I simplified my example to this: ----------------------------- --CREATE PROCEDURE sp_InsertOrders AS
DECLARE @docHandle INT, @xmlDoc VARCHAR(4000), @orderID INT
--DROP TABLE #Orders CREATE TABLE #Orders ( OrderId SMALLINT IDENTITY(1,1), FkCustomerID SMALLINT NOT NULL, OrderDate DATETIME NOT NULL )
--DROP TABLE #OrderDetails CREATE TABLE #OrderDetails ( OrderDetailsId SMALLINT IDENTITY(1,1), FkOrderID SMALLINT NOT NULL, ProductID SMALLINT NOT NULL, UnitPrice SMALLINT NOT NULL )
INSERT INTO #Orders (FkCustomerID, OrderDate) SELECT CustomerID, OrderDate FROM OpenXML(@docHandle, 'Orders/Order', 3) WITH ( CustomerID INTEGER, OrderDate DATETIME )
SET @OrderID = @@IDENTITY;
--INSERT INTO #OrderDetails (@OrderID, ProductID, UnitPrice) SELECT @OrderID AS OrderID, ProductID, UnitPrice FROM OpenXML(@docHandle, 'Orders/Order/OrderDetails', 3) WITH ( ProductID INTEGER, UnitPrice INTEGER ) -----------------------------
All orders are inserted first which makes the use of @@IDENTITY incorrect (it works fine if you insert a single order with multiple order details). Since it was quite some time since I last worked with SQL I am not sure if am doing it the right way... :confused: :confused: Anybody out there who knows how to solve the problem?
I concatenate multiple rows from one table in multiple columns like this:
--Create Table CREATE TABLE [Person].[Person_1]( [BusinessEntityID] [int] NOT NULL, [PersonType] [nchar](2) NOT NULL, [FirstName] [varchar](100) NOT NULL, CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1 set weight= d.weight, stateweight=d.stateweight, overallweight=d.overallweight from (select * from table2)d where table1.state=d.state and table1.month=d.month and table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
