hi guys,
i have a problem, i have a query which does a search based on a parameter, thing is i want to order them according to how relevant the results are such as 5 for beingan exact match, 0 for being no match. using a series of liek statements.
so that the most relevnat results are displayed at the top.
how do i achieve this - im a bit confused about this.
appreciate any and all help guys
thanks
andy
Hi
what i like to do is insert in one table 2 value from 2 different row.
exp:
table1: person
id name
1 bob
2 john
so id like to make an insert that will result in this
table 2: person_knowed
idperson1: 1
idperson2: 2
so the wuery should look something like this:
insert into person_knowed(idperson1, idperson2)(select id from personwhere name = 'bob',select id from personwhere name = 'john'));
anybody have an idea of how to acheive this?
I have an existing query, which runs pretty good. However, I need to create a new report, in which I would require to alter the existing query to return two values from each of the subqueries back to the main query.
The following is the current query:
SELECT
tbLogTimeValues.DateTimeStamp as DateTimeStamp
,tbLogTimeValues.FloatVALUE AS Value
FROM
tbLogTimeValues
[Code] ....
Need putting together a query that returns two values from the first sub query (DateTimeStampTemperature and ValueTemperature) and from the second query return (DateTimeStampHumidity and ValueHumidity).
I would simply have to change the Path LIKE '%' + 'Temperature Interval%' within the humidity subquery to read:
Path LIKE '%' + 'Humidity Interval%'
Obviously, I would like to keep the DateTimeStamp comparisons as part of the main query, as the customer has access to this via parameters, and should be the same for both subqueries.
Hi, figured out where I was going wrong in my post just prior, but isthere ANY way I can assign several variables to then use them in anUpdate statement, for example (this does not work):ALTER PROCEDURE dbo.UpdateXmlWF(@varWO varchar(50))ASDECLARE @varCust VARCHAR(50)SELECT @varCust = (SELECT Customer FROM tblWorkOrdersWHERE WorkOrder=@varWO)DECLARE @varAssy VARCHAR(50)SELECT @varAssy=(SELECT Assy FROM tblWorkOrdersWHERE WorkOrder=@varWO)UPDATE statement here using declared variables...I can set one @variable but not multiple. Any clues? kinda new tothis.Thanks,Kathy
View 2 Replies View RelatedHello,
I have a stored procedure that creates a temporary table, and then populates it using an INSERT and then a series of UPDATE statements. The procedure then returns the temporary table which will contain data in all of its columns.
When I call this procedure from SSRS 2005, the rowset returned contains data in only those columns that are populated by the INSERT statement. The columns that are set via the UPDATE statements are all empty. I read (in the Hitchhikers Guide to Reporting Services) that SSRS will only process the first rowset in a stored procedure that generates multiple rowsets. Is this true? Is this why SSRS does not retrieve data for the columns that are populated by the UPDATE statements?
Here is the stored procedure:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- File: sp_GetProgramsWatchedByDateRange.sql
-- Desc: Returns EDP program and related channel (i.e., provider) information from the IPTV Data warehouse.
-- Note that some of that data used by this procedure are obtained from the RMS_EPG database
-- which is created by an application (loadEPG) that loads the EPG data from a GLF format XML file.
-- Auth: H Hunsaker
-- Date: 11/07/2006
-- Example invocation
-- EXEC dbo.sp_GetProgramsWatchedByDateRange ...
-- Arguments/Parameters:
-- Parameter Name Type Description
-- 3. StartDate datetime First date of reporting period
-- 4. EndDate datetime Last date of reporting period
-- TerseMode bit Return all columns? (1 = no, 0 = yes)
-- 5. AsXML bit Resultset format (0 = standard, 1 = XML)
-- 6. Debug bit Debug mode (0 = off, 1 = on). Currently disabled
IF OBJECT_ID (N'dbo.sp_GetProgramsWatchedByDateRange') IS NOT NULL
DROP PROCEDURE dbo.sp_GetProgramsWatchedByDateRange
GO
CREATE PROCEDURE dbo.sp_GetProgramsWatchedByDateRange
@StartDate datetime = NULL,
@EndDate datetime = NULL,
@TerseMode bit = 0,
@AsXML bit = 0,
@Debug bit = 0
AS
-- Notes: Much of the program content (roles, flags, etc.) that we want is not stored in the IPTV data warehouse.
-- So I am going to the RMS_EPG database to obtain that information.
-- We will have to ensure that the 2 databases are generated at the same or a matching time
-- in order to to ensure that all programID values in the data warehouse can be located in the RMS_EPG database.
-- Debug code for testing
-- DECLARE @StartDate datetime
-- DECLARE @EndDate datetime
-- DECLARE @TerseMode bit
--SET @StartDate = NULL
--SET @EndDate = NULL
--SET @TerseMode = 1
SET NOCOUNT ON
CREATE TABLE #programWatched
(
--IPTV device ID
tdeviceId uniqueidentifier NULL,
taccountId uniqueidentifier NULL,
-- Basic program information
tprogram int NULL, -- programID from EPG XML, needed to access program data in the RMS_EPG db.
tprogramId uniqueidentifier NULL, -- programID generated by IPTV
tprogramTitle varchar(150) NULL,
tprogramEpisodeTitle varchar(100) NULL,
tprogramDescription varchar(500) NULL,
toriginDateTime datetime NULL,
tduration bigint NULL,
tprogramType nvarchar(100) NULL,
tchannelCallName nvarchar(20) NULL,
--Rating
programMPAARating varchar(50) NULL,
programVCHIPRating varchar(50) NULL,
programMPAARatingVal smallint NULL,
programVChipRatingVal smallint NULL,
-- Categories
programGenre varchar(50) NULL,
programCategory1 varchar(50) NULL,
programCategory2 varchar(50) NULL,
programCategory3 varchar(50) NULL,
programCategory4 varchar(50) NULL,
-- Roles
programActor1FirstName varchar(50) NULL,
programActor1LastName varchar(50) NULL,
programActor1 varchar(100) NULL,
programActor2FirstName varchar(50) NULL,
programActor2LastName varchar(50) NULL,
programActor2 varchar(100) NULL,
programActor3FirstName varchar(50) NULL,
programActor3LastName varchar(50) NULL,
programActor3 varchar(100) NULL,
programActor4FirstName varchar(50) NULL,
programActor4LastName varchar(50) NULL,
programActor4 varchar(100) NULL,
programActor5FirstName varchar(50) NULL,
programActor5LastName varchar(50) NULL,
programActor5 varchar(100) NULL,
programActor6FirstName varchar(50) NULL,
programActor6LastName varchar(50) NULL,
programActor6 varchar(100) NULL,
programActor7FirstName varchar(50) NULL,
programActor7LastName varchar(50) NULL,
programActor7 varchar(100) NULL,
programActor8FirstName varchar(50) NULL,
programActor8LastName varchar(50) NULL,
programActor8 varchar(100) NULL,
programDirectorFirstName varchar(50) NULL,
programDirectorLastName varchar(50) NULL,
programDirector varchar(100) NULL,
programWriterFirstName varchar(50) NULL,
programWriterLastName varchar(50) NULL,
programWriter varchar(100) NULL,
programProducerFirstName varchar(50) NULL,
programProducerLastName varchar(50) NULL,
programProducer varchar(100) NULL,
-- Flags
ClosedCaption bit NULL,
InStereo bit NULL,
Repeats bit NULL,
New bit NULL,
Live bit NULL,
Taped bit NULL,
Subtitled bit NULL,
SAP bit NULL,
ThreeD bit NULL,
Letterbox bit NULL,
HDTV bit NULL,
Dolby bit NULL,
DVS bit NULL,
FlagOrdinalValue smallint NULL,
-- Channel
tchannelId int NULL,
callLetters varchar(20) NULL,
displayName varchar(50) NULL,
type varchar(50) NULL,
networkAffiliation varchar(50) NULL
)
-- I store the program watching data in a temp table because
-- data from the VIL and the Sandbox that were used to test this procedure were either incomplete or invalid.
-- Use of a temp table with a series of updates allow me more control over the result set.
IF @StartDate IS NOT NULL AND @EndDate IS NOT NULL
INSERT INTO #programWatched (
tdeviceId,
tprogramId,
--tprogramTitle,
--tprogramEpisodeTitle,
toriginDateTime,
tduration,
--tprogramType,
--tchannelCallName,
ClosedCaption,
InStereo,
Repeats,
New,
Live,
Taped,
Subtitled,
SAP,
ThreeD,
Letterbox,
HDTV,
Dolby,
DVS
)
SELECT pw.DeviceID,
pw.programID,
--epg.program,
--epg.programTitle,
--epg.programEpisodeTitle,
pw.originTime AS 'When Watched',
pw.Duration AS 'Duration Seconds',
--epg.programType,
--epg.channelCallName,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -- program flag values default to zero, as we do not want NULL values.
FROM DW_EventClientProgramWatched pw
WHERE programID IS NOT NULL AND programID != '00000000-0000-0000-0000-000000000000' -- These values should not occur, but they did in the test system
AND originTime BETWEEN @StartDate AND @EndDate
ELSE
INSERT INTO #programWatched (
tdeviceId,
tprogramId,
--tprogramTitle,
--tprogramEpisodeTitle,
toriginDateTime,
tduration,
--tprogramType,
--tchannelCallName,
ClosedCaption,
InStereo,
Repeats,
New,
Live,
Taped,
Subtitled,
SAP,
ThreeD,
Letterbox,
HDTV,
Dolby,
DVS
)
SELECT pw.DeviceID,
pw.programID,
--epg.program,
--epg.programTitle,
--epg.programEpisodeTitle,
pw.originTime AS 'When Watched',
pw.Duration AS 'Duration Seconds',
--epg.programType,
--epg.channelCallName,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -- program flag values default to zero, as we do not want NULL values.
FROM DW_EventClientProgramWatched pw
WHERE programID IS NOT NULL AND programID != '00000000-0000-0000-0000-000000000000' -- These values should not occur, but they did in the test system
-- AccountId/SubscriberId
UPDATE #programWatched
SET taccountId = (SELECT accountId
FROM DW_BRDB_bm_device d
WHERE d.deviceId = tdeviceId)
-- program (this is the integer program ID stored in the EPG XML, not to be confused with the IPTV programId)
-- a program can occur on multiple channels, so we filter channels where scheduleTime <= originTime <= scheculeTime + durationSecs
UPDATE #programWatched
SET tchannelCallName = (SELECT TOP 1 channelCallName
FROM DW_EPG EPG
WHERE tprogramId = EPG.programId AND toriginDateTime BETWEEN scheduleTime AND DATEADD(s, epg.durationSecs, epg.scheduleTime))
UPDATE #programWatched
SET tprogram = (SELECT TOP 1 program FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramTitle = (SELECT TOP 1 programTitle FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramEpisodeTitle = (SELECT TOP 1 programEpisodeTitle FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramType = (SELECT TOP 1 programType FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName)
-- Rating (otained from programValues, can also be obtained from programFlags)
UPDATE #programWatched
SET programMPAARating = (SELECT TOP 1 programValue
FROM RMS_EPG..programValue pv
WHERE tprogram = pv.programID AND pv.programValueTypeId = 9)
UPDATE #programWatched
SET programMPAARatingVal = CASE programMPAARating
WHEN 'G' THEN 10
WHEN 'PG' THEN 25
WHEN 'PG-13' THEN 30
WHEN 'R' THEN 35
WHEN 'NC-17' THEN 50
WHEN 'NRAO' THEN 60
WHEN 'NR' THEN 0
ELSE 0
END
UPDATE #programWatched
SET programVChipRating = (SELECT TOP 1 programValue
FROM RMS_EPG..programValue pv
WHERE tprogram = pv.programID AND pv.programValueTypeId = 8)
UPDATE #programWatched
SET programVChipRatingVal = CASE programVChipRating
WHEN 'TV-Y' THEN 10
WHEN 'TV-Y7' THEN 20
WHEN 'TV-G' THEN 35
WHEN 'TV-PG' THEN 40
WHEN 'TV-14' THEN 45
WHEN 'TV-MA' THEN 60
ELSE 0
END
-- Genre
UPDATE #programWatched
SET programGenre = (SELECT TOP 1 programCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType psct ON psct.programSubCategoryTypeId = pc.programCategoryId
INNER JOIN RMS_EPG..programCategoryType pct ON pct.programCategoryTypeId = psct.programCategoryTypeId
WHERE tprogram = pc.programID)
-- Categories
UPDATE #programWatched
SET programCategory1 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID)
UPDATE #programWatched
SET programCategory2 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1))
UPDATE #programWatched
SET programCategory3 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1, programCategory2))
UPDATE #programWatched
SET programCategory4 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1, programCategory2, programCategory3))
-- Roles
UPDATE #programWatched
SET programDirectorFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 2)
UPDATE #programWatched
SET programDirectorLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 2)
UPDATE #programWatched
SET programDirector = programDirectorLastName + ' , ' + programDirectorFirstName
UPDATE #programWatched
SET programWriterFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 7)
UPDATE #programWatched
SET programWriterLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 7)
UPDATE #programWatched
SET programWriter = programWriterLastName + ' , ' + programWriterFirstName
UPDATE #programWatched
SET programProducerFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 6)
UPDATE #programWatched
SET programProducerLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 6)
UPDATE #programWatched
SET programProducer = programProducerLastName + ' , ' + programProducerFirstName
UPDATE #programWatched
SET programActor1FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1)
UPDATE #programWatched
SET programActor1LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1)
UPDATE #programWatched
SET programActor1 = programActor1LastName + ' , ' + programActor1FirstName
UPDATE #programWatched
SET programActor2FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName))
UPDATE #programWatched
SET programActor2LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleLastName NOT IN (programActor1LastName) AND programRoleLastName NOT IN (programActor1LastName))
UPDATE #programWatched
SET programActor2 = programActor2LastName + ' , ' + programActor2FirstName
UPDATE #programWatched
SET programActor3FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName))
UPDATE #programWatched
SET programActor3LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleLastName NOT IN (programActor1LastName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleLastName NOT IN (programActor2LastName) AND programRoleLastName NOT IN (programActor2LastName))
UPDATE #programWatched
SET programActor3 = programActor3LastName + ' , ' + programActor3FirstName
UPDATE #programWatched
SET programActor4FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName))
UPDATE #programWatched
SET programActor4LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName))
UPDATE #programWatched
SET programActor4 = programActor4LastName + ' , ' + programActor4FirstName
UPDATE #programWatched
SET programActor5FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName))
UPDATE #programWatched
SET programActor5LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName))
UPDATE #programWatched
SET programActor5 = programActor5LastName + ' , ' + programActor5FirstName
UPDATE #programWatched
SET programActor6FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName))
UPDATE #programWatched
SET programActor6LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName))
UPDATE #programWatched
SET programActor6 = programActor6LastName + ' , ' + programActor6FirstName
UPDATE #programWatched
SET programActor7FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName))
UPDATE #programWatched
SET programActor7LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName))
UPDATE #programWatched
SET programActor7 = programActor7LastName + ' , ' + programActor7FirstName
UPDATE #programWatched
SET programActor8FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName)
AND programRoleFirstName NOT IN (programActor7FirstName) AND programRoleLastName NOT IN (programActor7LastName))
UPDATE #programWatched
SET programActor8LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName)
AND programRoleFirstName NOT IN (programActor7FirstName) AND programRoleLastName NOT IN (programActor7LastName))
UPDATE #programWatched
SET programActor8 = programActor8LastName + ' , ' + programActor8FirstName
-- Channel (provider) Call Letters, Display Name and Type
-- Is this correct? Should we get the channelId from the schedule table?
-- Is this efficient? View execution plan
UPDATE #programWatched
SET tchannelId = (SELECT TOP 1 c.channelId
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram)
UPDATE #programWatched
SET callLetters = (SELECT TOP 1 c.channelCallLetters
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET displayName = (SELECT TOP 1 c.channelDisplayName
FROM RMS_EPG..channel c
JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET type = (SELECT TOP 1 c.channelType
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET networkAffiliation = (SELECT TOP 1 c.channelNetworkAffiliation
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
IF @TerseMode = 0
SELECT *
FROM #programWatched
ORDER BY toriginDateTime
ELSE
-- Get only Genre, title, show date/time, rating, call letters
SELECT tDeviceId, tprogramTitle, tprogramEpisodeTitle, programGenre, toriginDateTime, programMPAARating, programVCHIPRating, tchannelCallName
FROM #programWatched
ORDER BY toriginDateTime
DROP TABLE #programWatched
SET NOCOUNT OFF
GO
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I also tried a query that populates some of its columns via subqueries. The query works fine when executed by the SQL Sevrer Query Analyzer,
meaning that all columns contain values, but when executed from SSRS, the columns that are poulated by the subqueries are empty, and only the columns that are not set by subqueries contain values:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SELECT PW.DeviceID,
PW.originTime AS 'When Watched',
PW.programID,
PW.Duration AS 'Duration Seconds',
(SELECT TOP 1 programTitle FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN DW_EPG.scheduleTime
AND DATEADD(second, durationSecs, DW_EPG.scheduleTime)) AS Title,
(SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN DW_EPG.scheduleTime AND
DATEADD(second, durationSecs, DW_EPG.scheduleTime)) As program,
(SELECT TOP 1 programCategoryTypeValue
FROM RMS_EPG..programCategory PC
INNER JOIN RMS_EPG..programSubCategoryType PSCT ON psct.programSubCategoryTypeId = PC.programCategoryId
INNER JOIN RMS_EPG..programCategoryType PCT ON PCT.programCategoryTypeId = PSCT.programCategoryTypeId
WHERE PC.programID = (SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN
DW_EPG.scheduleTime AND DATEADD(second, durationSecs, DW_EPG.scheduleTime))) AS Genre,
(SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory PC
INNER JOIN RMS_EPG..programSubCategoryType PSCT ON psct.programSubCategoryTypeId = PC.programCategoryId
INNER JOIN RMS_EPG..programCategoryType PCT ON PCT.programCategoryTypeId = PSCT.programCategoryTypeId
WHERE PC.programID = (SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime
BETWEEN DW_EPG.scheduleTime AND DATEADD(second, durationSecs, DW_EPG.scheduleTime))) AS Category
FROM DW_EventClientProgramWatched PW
ORDER BY DeviceId, programId, originTime
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Any help is appreciated
i wonder what is the best approach to use !!!i have creditLimit column in Customer Table the default value will be 500 and this limit to allow users to send sms from my website ..... every month they will be allowed to send 500 sms referring to the credit limit column.... now !!if the user sent today some sms and after few days sent another 20 and after one week he sent 150 SMS as a total so that means he has only 350 SMS as credit to use this month!!!so what is the best approach to implement this solution ? shall i have another field in the table called 'CreditUsed' and that will be updated each time the user will send SMS and this value will be compared with the credit limit ORi use the formula for the column to calculate the credit left and do the maths !!!what is the best approach as you think ???thnaks for reading this question !!
View 7 Replies View RelatedHi
I wonder if its possible to return a value at same row from another colum if col1 contains NULL (or other criteria)
ex:
the output is:
col1,col2,col3
text1,text10,text100
text2,text20,text200
text3,NULL,text300
Can i take a value from col3 and return it to col2 in the output if a criteria is meet (like NULL)
the DDL is nvarchar254 at thoose colums.
thx in advance //Mr
i am running this script
SELECT dbo.SHOVEL_A.HOLEID, dbo.Shovel_Hole.HOLEID AS shovel_id, dbo.SHOVEL_A.PROJECTCODE, dbo.Shovel_Hole.Shotname,
dbo.Shovel_Hole.B_FEET, dbo.Shovel_Hole.S_FEET, SQRT(square(dbo.SHOVEL_A.EAST - dbo.Shovel_Hole.EAST)
+ square(dbo.SHOVEL_A.NORTH - dbo.Shovel_Hole.NORTH)) AS distance_total
FROM dbo.SHOVEL_A FULL OUTER JOIN
dbo.Shovel_Hole ON dbo.SHOVEL_A.POLYGONO = dbo.Shovel_Hole.Shotname AND distance_total <= dbo.Shovel_Hole.B_FEET
GROUP BY dbo.SHOVEL_A.HOLEID, dbo.Shovel_Hole.HOLEID, dbo.Shovel_Hole.Shotname, dbo.Shovel_Hole.B_FEET, dbo.Shovel_Hole.S_FEET,
dbo.SHOVEL_A.PROJECTCODE, SQRT(square(dbo.SHOVEL_A.EAST - dbo.Shovel_Hole.EAST)
+ square(dbo.SHOVEL_A.NORTH - dbo.Shovel_Hole.NORTH))
HAVING (dbo.SHOVEL_A.PROJECTCODE = 'PRODL') AND (dbo.Shovel_Hole.Shotname = '20040524029')
but i have a result with the message that my colum name distance_total is wrong, so how can i fix that?
cheers
edwin
We are thinking of using general purpose column names in our application schema. We want to give the option to the end user to customize the filed names to fit their business . We want to build the functionality on the generic names so that it will work for multiple customes.
Example: We may want to have 10 Strings, 10 numbers and 5 booleans pre defined and reports running off of the table. The customer can name first number as pressure, second one for length and map their data to the table. Other customer can use the first number for temperature and the second one for width.
Is there a way to do it in SQL server w/o having a lookup table for column name aliasing?
Thanks
i am running this script , but i have this result even though my script is ok, so i do not what is the problem.
SELECT dbo.SHOVEL_A.HOLEID, dbo.Shovel_Hole.HOLEID AS shovel_id, dbo.SHOVEL_A.PROJECTCODE, dbo.Shovel_Hole.Shotname,
dbo.Shovel_Hole.B_FEET, dbo.Shovel_Hole.S_FEET, SQRT(square(dbo.SHOVEL_A.EAST - dbo.Shovel_Hole.EAST)
+ square(dbo.SHOVEL_A.NORTH - dbo.Shovel_Hole.NORTH)) AS distance_total
FROM dbo.SHOVEL_A FULL OUTER JOIN
dbo.Shovel_Hole ON dbo.SHOVEL_A.POLYGONO = dbo.Shovel_Hole.Shotname AND distance_total <= dbo.Shovel_Hole.B_FEET
GROUP BY dbo.SHOVEL_A.HOLEID, dbo.Shovel_Hole.HOLEID, dbo.Shovel_Hole.Shotname, dbo.Shovel_Hole.B_FEET, dbo.Shovel_Hole.S_FEET,
dbo.SHOVEL_A.PROJECTCODE, SQRT(square(dbo.SHOVEL_A.EAST - dbo.Shovel_Hole.EAST)
+ square(dbo.SHOVEL_A.NORTH - dbo.Shovel_Hole.NORTH))
HAVING (dbo.SHOVEL_A.PROJECTCODE = 'PRODL') AND (dbo.Shovel_Hole.Shotname = '20040524029')
Hi All,
I have a column called TIER in my database which is a long string. There are piece of these strings that are separated by spaces like this:
'A3A00 A2B00 B1A00 C2C06 C3A06 C5A00 D2C00 G6B00 M2B00 M3B00 P7A00 T2A00 G4C00 G3C00 T5A06'
How do I select the last 2 characters of the piece of string when the first 2 chacters are M2?
I have the following:
This is retruning me all the rows that have 'M2'.
declare @code varchar (2)set @code = 'M2'select tier from companywhere tier like '%'+@code+'___ %'
Any help is appreciated.
Thank you in advance.
HI,
how can i drop the identity on a column from the table.
I have no access to the sql enterprise manager, i have to do it thru query analyser only.
regards,
varadish
Hi All,
Just want to know if a column with IDENTITY can be altered. If yes, how?
I have a table with colum defined like this:
CREATE TABLE [dbo].[Test] (
[TestID] [int] IDENTITY (1, 1) NOT NULL ,
.......
Through ALTER TABLE script (I don't want to do it through Enterprise Manager) I want it to be like this:
CREATE TABLE [dbo].[Test] (
[TestID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,
.......
I want the constrain "NOT FOR REPLICATION" done through ALTER TABLE script. Is that possible?
Please let me know with the syntax.
Thanks
Sri
Hi All,
I'm having this many rows(around 25 columns am only showing some 3),
but in the output i want only 2 rows, how can i do that.
16_00SB3215-02
16_0100301A39A041
16_02Successful
16_03Successful
16_04Successful
16_0500301A39A042
18_00Pass
18_0200301A39A041
18_0300904BC1A1D6
18_325.18
18_335.19
18_345.24
18_365.40
18_375.39
18_385.32
18_40-49
18_41-56
18_42-53
18_44-62
18_45-63
18_46-60
26_00SB3216-02
26_0100301A39A041
26_02Successful
26_03Successful
26_04Successful
26_0500301A39A042
28_00Pass
28_0200301A39A041
28_0300904BC1A1D6
28_325.68
28_336.19
28_349.24
28_365.40
28_375.89
28_385.32
28_40-49
28_41-56
28_42-53
28_44-82
28_45-63
28_46-69
Output like this
----------------
16_00SB3215-02 6_0100301A39A0416_02Successful6_03Successful6_04Successful6_0500301A39A0428_00Pass8_0200301A39A0418_0300904BC1A1D68_325.18 8_335.19 8_345.24 ....................
like this
please help me, how can i do this
with Regards
Amjath
I have about 5 statements like the update below, depending on the PID different columns will be update "C2005, G2005,E2005...."
I would like to use 1 update statement in stead of 5 to update all columns below are 2 original update statements and my attempt at when then update. Note a different column is updated depending on the PID.
If when then isnt possible, any other suggestions are welcomed. Thanks
UPDATE #Sec
SET C2005 = Pos.USD / 1000
FROM #Sec INNER JOIN
Pos ON #Sec.ID = Pos.ID
WHERE (Pos.PID = 'B')
UPDATE #Sec
SET G2005 = Pos.USD / 1000
FROM #Sec INNER JOIN
Pos ON #Sec.ID = Pos.ID
WHERE (Pos.PID = 'G')
UPDATE #Sec
WHEN (Pos.PID = 'C') THEN SET C2005 = Pos.USD / 1000 end
WHEN (Pos.PID = 'G') THEN SET G2005 = Pos.USD / 1000 end
WHEN (Pos.PID = 'E') THEN SET E2005 = Pos.USD / 1000 end
FROM #Sec INNER JOIN
Pos ON #Sec.ID = Pos.ID
Hello,
I have a table in witch i would like to replace all the data form one columm following a criteria.
The criteria is:
Where 1010222222 will be 0020222222
So i want to make a script that enables me to substitute all the data in that columm that begin by "101" for "002"
Any help?
Thanks
Im Working with stored procedure. How can i compare Columns with specific values. I want to get the greater values of those column and inserted it to other columns. i want something like these
CASE
WHEN a> b,c,d THEN a
WHEN b> a,c,d THEN b
WHEN c> a,b,d THEN c
WHEN d> a,d,c THEN d
is there any ways to implement this? i got an error..
thanks please help..
Hi all, I am trying to sum a column into different variables depending on another column. Let me explain my self better with an example
DECLARE @Initial decimal(18,2), @incomings decimal(18,2), @outgoings decimal(18,2)
SELECT
@initial = CASE WHEN type = 1 THEN SUM(amount) END,
@incomings = CASE WHEN type = 2 THEN SUM(amount) END,
@outgoings = CASE WHEN type = 3 THEN SUM(amount) END,
FROM Transactions
WHERE date = '05/14/2006' AND STATION = 'apuyinc'
GROUP BY type, amount
What I am trying to do is to sum all of the incomings transactions into @incomings, all of the outgoing transactions into @outgoings and the initial transaction into @initial where
The incoming transactions is type 2,
outgoing transactions is type 3
Thanks for the help
@puy
In SQL7, if you add a column to a table, is it necessary to recompile all
stored procs that reference that table?
Under 6.5, this caused problems at our site unless the Procs were 'refreshed'.
Is this only necessary where select * is used?
Thanks
I have a large text colum I am trying to insert into a DB
This colum is about 800 chars longs
I have set the colum type in the table to text
I have set the table option for text in row to on
I have set the table option for text in row to 1000
But it is still chopping the text at the 256 char mark on insert.
Anyone have any ideas ?? This is SQL 2000.
Chris
Hi ,I have this querypaprojnumber is varcharpatx500 is textpalineitemseq is intselect Paprojnumber,Patx500,max(palineitemseq) from pa02101,pa01601wherepa02101.pabillnoteidx=pa01601.pabillnoteidx group bypaprojnumber,patx500it throws this errorServer: Msg 306, Level 16, State 2, Line 1The text, ntext, and image data types cannot be compared or sorted,except when using IS NULL or LIKE operator.Thanks a lot for your help.AJ
View 2 Replies View RelatedTHe unique Id column is set to identity seed. Yet when transfering 1500 records it fails to stuff them all becuase it says there is a NULL in unique id column.
"Cannot insert the value NULL into column UID column does not allow"
Yet in the transformation screen I am setting the UID column to <ignore> meaning I do not have that value in my source and I am wanting the destination table to do it's thing and incrememnt by 1 the identity seed.
Is this common?
THe source and destination tables are in the same databes.
Trying to find which Employees have NOT entered a record (timecard).
Table #1 Employee_Hours
Table #2 Employee (List active)
Table #1
SELECT EID, DATEPART(wk,[Date]) AS Week, MAX([Date]) AS WeekEnding
FROM Employee_Hours
WHERE ([Date] Between '1/1/04' AND '12/31/04')
GROUP BY EID, DATEPART(wk,[Date])
HAVING MAX([Date]) = '1/24/04' --Pay period
Table #2
SELECT EID, DisplayName
FROM Employee
WHERE (Active=1)
I tried subqueries and temp tables but can't get the results I need. The first query will return the employees who entered their time for the given pay period.
Thanks
Hi,
I have the following sql statement:
INSERT INTO prg_lvl VALUES (
'Data Recovery',
'Data Recovery',
7,
'ENG',
0,
16,
'Menu=w_data_recovery_stk;',
( select max(menu_id) + 1 from prg_lvl ),
'K');
that works for Sybase and I wanna make it works for SQL Server.
The problem is the use ot the subquery (select max(menu_id) + 1 from prg_lvl).
Could I use subqueries in SQL Server in general or is there is any other method to overcome this problem
Thanks,
fady
Hi,
I would like to know
What is Corelated SubQueries??
Thanks in Advance
I am very new to SQL Server, working with it in class. I am trying to do procedures involving subqueries using the Northwind database, and am having a rough time.
For instance, I have the following code, which lists all orders for the month of November, 1996:
SELECT Customers.CustomerID, Customers.CompanyName, CAST(Orders.OrderDate AS CHAR (11) )AS OrderDate
FROM Customers, Orders
WHERE Customers.CustomerID = Orders.CustomerID
AND OrderDate BETWEEN '11/1/1996' AND '11/30/1996' ;
I have been asked to do the same thing, but using a subquery. I came up with the following:
SELECT CustomerID, CompanyName FROM Customers a
WHERE EXISTS (SELECT OrderDate FROM Orders b WHERE a.CustomerID = b.CustomerID
AND OrderDate BETWEEN '11/1/1996' AND '11/30/1996' ) ;
However, it does not list the Order Date, as I want it to, and the information is not correct (it is missing a few orders from November '97 that should show up. Can someone tell me what I am doing incorrectly?
Please note that I do not need anyone to give me the code, but simply give me an idea of what I am doing incorrectly, or let me know how it can be done, so that I may do it. =-)
Hi all,I've seen mention that you can use nested subqueries down to as manylevels as you like but whenever I run the following:select * from table1where tab1ID in(select tab1ID from table2 where tab2ID in(select tab2ID from Table3 where Tab3ID=N))I get the error "incorrect syntax near the keyword 'where'"Can anyone confirm that sub-subqueries are possible? If so is thesyntax I'm using correct?I'm running SQL 2000 through a Delphi 5 app.RegardsJon
View 2 Replies View RelatedGuys,Got this query...---------------------------SELECT TOP 5 Tbl_admin_hotels.HotelName,(SELECT COUNT(Tbl_marketing_history.HotelID)FROM Tbl_marketing_historyWHERE Tbl_marketing_history.HotelID = Tbl_admin_hotels.HotelID)AS CountTotal,(SELECT MAX(DateSent)FROM Tbl_marketing_historyWHERE Tbl_marketing_history.HotelID = Tbl_admin_hotels.HotelID)AS LastSentFROM Tbl_admin_hotelsWHERE NOT Tbl_admin_hotels.HotelID = 99ORDER BY CountTotal DESC---------------------------Within the table Tbl_marketing_history there is also a 'Subject' column thatI require, the row to grab this Subject column from should relate to the rowI'm selecting in the SubQuery to grab 'DateSent'.I've tried and tried to grab multiple columns but failed miserably? Cananyone help pleaseeee!Cheers, Ash
View 12 Replies View RelatedIn this stored procedure, I want to grab all the information for Sales Representatives that made less then 6 visits. I have done that in the subquery. But I also want to be able to display their visits by Dates where any number of visits was made. Meaning, i want to be able to show Everyday where a visit was made, but i only want the records that are less then 6 visits. So I want nulls to show up for the dates where no visits were made. So I can track the people that didnt make visits, on days other made visits (which means they should have visits too)
So basically my report looks like this:
09-10-2007 09-11-2007 09-14-2007
Tom Smith 1 3 4
Janice Cooper 3 5 5
Troy Slater 5 4 2
Kelly Short 4 4 4
When i want it to look like this:
09-10-2007 09-11-2007 09-12-2007 09-13-2007 09-14-2007
Tom Smith 1 3 null null 4
Janice Cooper 3 5 null null 5
Troy Slater 5 4 null null 2
Kelly Short 4 4 null null 4
Its an exception report, so i want to show what was not done , on days that are supposed to have things done, i cant show this, if dates are not displayed before there were no visits less then 6. I want to display all relevant dates, where any number of visits was mad. But only show the visits that were less then 6.
Here's my stored procedure that already has the less then 6 visits showing. But doesnt always show the dates. What should i do?
Code Block
SELECT dbo.Qry_Visits.Status,
dbo.Qry_Visits.Customer_code,
Qry_Sales_Group.Name,
dbo.Qry_Sales_Group.SR_Name,
dbo.Qry_Date_Dim.Date_Dimension_Fiscal_Week,
dbo.Qry_Date_Dim.Date_Dimension_Date,
dbo.Qry_Date_Dim.Day_Of_Month,
dbo.Qry_Sales_Group.Region,
dbo.Qry_Visits.period_code,
dbo.Qry_Visits.cycle_day, dbo.Qry_Visits.Visits,
dbo.Qry_Visits.time_log, dbo.Qry_Visits.Mailing_Name,
dbo.Qry_Date_Dim.Date_Dimension_Year,
dbo.Qry_Date_Dim.Date_Dimension_Period,
CONVERT(varchar, dbo.Qry_Visits.time_log, 110) AS Date,
dbo.Qry_Sales_Group.Region_Key, dbo.Qry_Visits.[SR Code],
B.VisitsTotal
FROM dbo.Qry_Visits
INNER JOIN dbo.Qry_Sales_Group
ON dbo.Qry_Visits.[SR Code]
COLLATE SQL_Latin1_General_CP1_CI_AS = dbo.Qry_Sales_Group.SalesPerson_Purchaser_Code
AND dbo.Qry_Visits.[SR Code] = dbo.Qry_Sales_Group.SalesPerson_Purchaser_Code
COLLATE Latin1_General_CI_AS
INNER JOIN dbo.Qry_Date_Dim
ON CONVERT(varchar, dbo.Qry_Date_Dim.Date_Dimension_Date, 110) = CONVERT(varchar, dbo.Qry_Visits.time_log, 110)
INNER JOIN ( Select COUNT(Visits)as VisitsTotal,[Sales Responsible],CONVERT(VARCHAR,(Qry_Visits.time_log),110)TheDate,Qry_Visits.Status
FROM dbo.Qry_Visits
WHERE Qry_Visits.Status=2
GROUP by [Sales Responsible] , CONVERT(VARCHAR,(Qry_Visits.time_log),110),Qry_Visits.Status
HAVING SUM(Visits) < 6)B
ON dbo.Qry_Sales_Group.SR_Name COLLATE Latin1_General_CI_AS = B.[Sales Responsible] COLLATE Latin1_General_CI_AS AND
CONVERT(varchar, dbo.Qry_Date_Dim.Date_Dimension_Date, 110) = B.TheDate
WHERE Qry_Visits.Status=2
ORDER BY dbo.Qry_Sales_Group.SR_Name, CONVERT(varchar, dbo.Qry_Date_Dim.Date_Dimension_Date, 110)
Hey everyone, I'm running into an issue where I have a select statement that retrieves all employee records from a employee table. In this statement I'm displaying first and last name, titlte and the employees manager id(which is the employees id). What I want is a query that instead of displaying the manager's id, display the manager's name. The query that I'm using below doesn't work. I was hoping that someone could help me out:
SELECT LastName, FirstName, Title, Extension,
(SELECT FirstName, LastName
FROM Employees
WHERE (ReportsTo = EmployeeID)) AS Reports
FROM Employees
Here's the data that I'm using:
LastName, First Name Title Extension Reprots To
Davolio
Nancy
Sales Representative
5467
13
Fuller
Andrew
Vice President, Sales
3457
0
Leverling
Janet
Sales Representative
3355
12
When I run this query I get a error saying "Only one expression can be specified in the select list when the subquery is not introduced with Exists"
Thanks in advance for your help.
Hi all,We're selecting data from our database, FirstName, LastName, MobileNumber etc.We're using the detaials view function to return it in a table upon selection. However all of the variables are returned as they are in the database, ie: without spaces. We tried putting in spaces by selecting "AS what ever", but MSSQL does not seem to like spaces.Any ideas?Thanks
View 2 Replies View RelatedUrgent help needed!I moved an application from ASP+ACCESS to ASP+MS SQLSERVER and I havethe following problem:If the join on two tables results on duplicate colum names (whichappear in both tables) I could reference them by using:RECORDSET("TABLENAME.COLUMNAME")However with SQLServer if I try this kind of reference I get an errormessage.How can between two colums with the same name from two differen tables?Thanks in advance!Adam
View 5 Replies View RelatedSo I already no this can't be done... but I need a suitable alternative (if one exists) so I don't have to competely re-write this already too huge query.
Anyways, in my select I have something like this:
sum( case when code in (1,2,3,4) then 0 else 1 end ) as total
which has now increase from four static values to a more dynamic format, that being a table with 47 values which may shrink or grow over time. Attempting the following fails:
sum( case when code in (select code_id from ExcludedCodes) then 0 else 1 end ) as total
because apparently you can't use selects or aggregates within an aggregate.
So any ideas on how I can get this working... is there no Array or List type variable I could just substitute in? I've already tried using a Table Variable, but that failed as well.
Please keep in mind, this is one line of a very large select containing many other fields and aggregates (on a fair amount of joins) which is used in at least four differerent reporting queries. If there is no quick and easy replacement trick I can do just let me know so I can start re-writing all of them (which is seriously going to make my head hurt).