Hi All,
Just wondering if anyone can tell me if you can test for multiple
conditions as part of an "IF" statement in T-SQL in SQL Server 2000?
ie something like:
IF @merr = 1 or @merr=2
Begin
SELECT statement
UPDATE statement
End
Any help much appreciated!
Much warmth,
M.
I have a table with the following fields and data:
Offense, Year, Month, Count, Amount
F 2007 January 11 $49,238.00
F 2007 February 12 $24,000.00
F 2007 March 31 $55,184.00
F 2007 April 19 $64,647.00
F 2007 May 33 $100,010.00
F 2007 June 16 $59,678.00
F 2007 July 22 $39,700.00
F 2007 August 3 $9,000.00
F 2007 September 4 $75,000.00
F 2007 October 8 $19,250.00
F 2007 November 50 $106,153.00
F 2007 December 26 $80,000.00
I have data for years 2007-2014. I am designing an SSRS report, and want to use IIF statement to return data. Using the following:
=IIF(Fields!Year.Value="2007" AND Fields!Month.Value="February", "return value of count field", "n/a")
The above does not work, it doesn't return the value of Count field, it does return the n/a.
My question is fairly simple. When I join between two tables, I always use the ON syntax. For example:
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId)
No problems there. However, if I then decide to further filter the selection based on some trait of the UserRole, I have two options: I can add the condition as a WHERE statement, or I can add the condition within the ON block.
--Version 1:
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId)
WHERE
UserRoles.Active = 'TRUE'
-- Version 2
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId
AND UserRoles.Active = 'TRUE')
So, the question is, which is faster/better, if either? The Query Analyzer shows the two queries have the exact same execution plan, which makes sense, since they're both joining the same tables. However, I'm wondering if adding the condition in the ON statement results in fewer rows the JOIN statement initially needs to join up, thus reducing the overall initial size of the results table before the WHERE conditions are applied.
So is there a difference, performance wise? I imagine that if Users had a thousand records, and UserRoles had 10 records, then the JOIN would create a cartesian product of the two tables, resulting in 10,000 records in the table before the WHERE conditions are applied. However, if only three of the UserRoles is set to Active, would that mean that the resulting table, before applying WHERE conditions, would only contain 3000 records?
Thanks for whatever information you can provide.
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
Hi All.
Is there a way to have multiple AND conditions on the same field in a database.
EXAMPLE
SELECT * FROM tbl
WHERE field1 = 1 AND field1 = 2 AND field1 = 5
Thanks
Hi All,
This is my problem. I need the out put of a sql select statement to be "true" or "false" depending on the actual columns value is positive or negative. Does any one how to do this.
Thanks in advance,
-VJ
Hi,
I've a table with a field named 'TypeOfProd' that has an ID for the various types of products: ex.:
1 - product A
2 - product B
3- product C
4 - product D
....
10 - product J
and so on
I need to create a stored procedure that querys only the product types selected by the user.
The user can select 1, 3, 5, 10 or 1, 3 or 3 or 0 for all or some other combination.
For the first user selection a have something like this
SELECT Prod FROM tableProd WHERE TypeOfProd = 1 OR TypeOfProd = 3 or TypeOfProd = 5 OR TypeOfProd = 10
For the second,
SELECT Prod FROM tableProd WHERE TypeOfProd = 1 OR TypeOfProd = 3
Is it possible to have a stored procedures that runs a query with this random scenario?
please help
Thanks
JPP
Select c.Plan, c.ClaimNumber
from tbFLags c inner join tbMembers m
On c.Claim = m.HistoryNum
where c.Plan = 'J318' and c.Paymon = c.Rmon and c.Rmon = '2008-03-01'
Now I want to add these into this statement, what should be done.
Members meeting any of the 3 sets of criteria should not be selected
1) tbFlags.Hosp='1'
2) tbFlags.RD='1' OR tbCMSFlags.RAType in ('D', 'I2')
3) Deceased = tbMembers.DOD is not null.
I am have a dimension to use as a slicer, I am trying to associate that dimension with a measure group using a calculated measure. I am using the below query:
With member [THD Inventory Balance] as
IIF(
[THD Conversion Units].[Conversion Units].CURRENTMEMBER = [THD Conversion Units].[Conversion Units].&[EA], [Measures].[thdpos - Inventory Balance EA], 0)
IIF(
[THD Conversion Units].[Conversion Units].CURRENTMEMBER = [THD Conversion Units].[Conversion Units].&[LF],
[Code] ....
But it fails with the error: The syntax for 'IIF' is not correct.
I have a ListBox controls that contains about 5 items. A stored procedure is executed based on selections of other controls ont he screen, but I cann't figure out how to properly get the dynamically selected conditions passed to the sproc from C#.
If a user selects 3 of the five items, the sproc needs to build something like this:
WHERE Region LIKE Item1 OR Region LIKE Item2 OR Region LIKE Item3
I cannot figure out how to do this. It works properly if I just make the ListBox SelectionMode as Single and pass that one selected item's value.
Any help is greatly appreciated.
Thanks,
Chris
How can i insert a if-else condition in a select statement or is there a way to specify a condition within a select statement?
Any reply is really appreciated..thank you..
shemay
Hi,
I am attempting to explain my probelm again. Please read it:
I have 3 tables. CallDetail, Call and Request. The tables are populated in the following order: One row for CallDetail, One for Call and one for Request and so on.
I have to generate a UniqueNo - Per empid, Per StateNo, Per CityNo, Per CallType. The no will remain same for the same CallDetailID and ordered by the date created. However if the CallDetailId changes, the no. will increment based on the empid, Per StateNo, Per CityNo, Per CallType
For eg:
For Eg: ( Assume Call Detail id is changing for all the days)
Monday - 3 calls made for empid 1, state SA023, city 12 and call type 1 will generate a unique id 1 for all 3 calls
Tuesday - 2 calls made for empid 1, state SA023, city 12 and call type 1 will generate a unique id 2 for both calls
Wednesday - 3 calls made for emp id 1, state SA023, city 12 and call type 2 will generate a unique id 1 for 3 calls as the call type is different than the previous day for same employee
Thursday - 2 calls made for empid 2, state SA023, city 13 and call type 1 will generate unique id 1 for both the calls as combi of city and call type are different.
So the unique id has to be generated considering empid, state, city and call type, ordered by the EntryDt. EntryDt is needed because :
3 calls made for empid 1, state SA023, city 12 and call type 1 at 10/11/2007 10.00 AM will generate a unique id 1 for all 3 calls
2 calls made for empid 1, state SA023, city 12 and call type 1 at 10/11/2007 12.00 AM will generate a unique id 2 as the call was registered later.
Here is what I wrote with the help of a mod over here:
Code Block
DECLARE @Request TABLE(RequestID INT, CustomerName VARCHAR(30),
StateNo NVARCHAR(5), CityNo INT, CallID INT, UniqueNo INT)
INSERT @Request
SELECT '324234', 'Jack', 'SA023', 12, 111, Null UNION ALL
SELECT '223452', 'Tom', 'SA023', 12, 112, Null UNION ALL
SELECT '456456', 'Bobby', 'SA023', 12, 114, Null UNION ALL
SELECT '22322362', 'Guck', 'SA023', 12, 123, Null UNION ALL
SELECT '22654392', 'Luck', 'SA023', 12, 134, Null UNION ALL
SELECT '225652', 'Jim', 'SA023', 12, 143, Null UNION ALL
SELECT '126756', 'Jasm', 'SA023', 12, 145, Null UNION ALL
SELECT '786234', 'Chuck', 'SA023', 12, 154, Null UNION ALL
SELECT '66234', 'Mutuk', 'SA023', 12, 185, Null UNION ALL
SELECT '2232362', 'Buck', 'SA023', 12, 195, Null
DECLARE @Call TABLE(CallID INT, CallType INT, CallDetailID INT)
INSERT @Call
SELECT 111, 1, 12123 UNION ALL
SELECT 112, 1, 12123 UNION ALL
SELECT 114, 1, 12123 UNION ALL
SELECT 123, 2, 12123 UNION ALL
SELECT 134, 2, 12123 UNION ALL
SELECT 143, 1, 6532 UNION ALL
SELECT 145, 1, 6532 UNION ALL
SELECT 154, 1, 6532 UNION ALL
SELECT 185, 2, 6532 UNION ALL
SELECT 195, 3, 6532
DECLARE @CallDetail TABLE(CallDetailID INT, EmpID INT, EntryDt DateTime)
INSERT @CallDetail
SELECT 12123, 1, '11/5/2007 10:41:34 AM' UNION ALL
SELECT 6532, 1, '12/5/2007 12:12:34 PM'
-- Query written with help of a helpful person here
UPDATE r
SET r.UniqueNo = dt.CallGroup
FROM @Request r
JOIN @Call c
ON r.CallID = c.CallID
JOIN (SELECT
CallDetailID,
EntryDt,EmpID,
CallGroup = ROW_NUMBER() OVER (ORDER BY EntryDt )
FROM @CallDetail
) dt
ON c.CallDetailID = dt.CallDetailID
select * from @Request
OUTPUT IS
324234 Jack SA023 12 111 1
223452 Tom SA023 12 112 1
456456 Bobby SA023 12 114 1
22322362 Guck SA023 12 123 1
22654392 Luck SA023 12 134 1
225652 Jim SA023 12 143 2
126756 Jasm SA023 12 145 2
786234 Chuck SA023 12 154 2
66234 Mutuk SA023 12 185 2
2232362 Buck SA023 12 195 2
Where as it should be
324234 Jack SA023 12 111 1
223452 Tom SA023 12 112 1
456456 Bobby SA023 12 114 1
22322362 Guck SA023 12 123 1
22654392 Luck SA023 12 134 1
225652 Jim SA023 12 143 2
126756 Jasm SA023 12 145 2
786234 Chuck SA023 12 154 2
66234 Mutuk SA023 12 185 2
2232362 Buck SA023 12 195 1
as the call for Buck is of calltype 3 which was not done earlier. So the no starts from 1.
Also how to add the paritioning by empid, StateNo, Per CityNo, Per CallType and yet maintain the same unique no for the same calldetailid.
Eg: CallGroup = ROW_NUMBER() OVER (PARTITION BY empid, state, city, calltype ORDER BY EntryDt )
thanks for any help.
Hi,
I have a tbl called BANK.
This shows a banking history of transactions and includes a field called TransType and a field called PaymentID.
I also have two other tables called Suppliers and SubContractors.
For each record in the bank, I need to match up a record in either the suppliers or subcontractors tbl based on the PaymentID value. I know if the record relates to either a Supplier or Subcontractor based on the value of the TransType field which will be either SUPPLIER or SUBCONTRACTOR or Null (in which case a match doesn't matter)
I have a working query based on joining just the Supplier tbl.. but how do I do the join to the other tbl aswell?
So overall, for each record in the bank, if the transtype is SUPPLIER I need to look in the supplier tbl for a match for that paymentID, and if the transtype is SUBCONTRACTOR, I need to do the same but in SUBCONTRACTOR tbl.
How would I best write that?
thanks for any help!
I have a table (GLTRANS) with thousands of lines.
1 column in the table (ACCNO) has 300 different values which all need to change to a new value.
ie. 11100 all change to 8100
11200 all change to 8200
I know how to do a simple UPDATE
UPDATE GLTRANS
SET ACCNO = '8100'
WHERE ACCNO = '11100'
But how can i combine into 1 script rather than having to continually change this script 300 times??
Thanks
Wilbur
I have a record that I want to insert into (2) tables. The first thing I want to do is see if a record already exists in the table for the user, if it does - I just want to skip over the insert.
next I want to do the same thing in the SW_REQUEST table. If there is a record in there for the member, I want to just skip the insert.
My code works as long as there isn't an existing record in the tables. Can someone give me a hand?
Here's what I have (and it doesn't work)
CREATE PROCEDURE b4b_sw_request
@FName as varchar(50)= NULL,
@LName as varchar(50)=NULL,
@Address1 as varchar(100) = NULL,
@Address2 as varchar(100) = NULL,
@City as varchar(50) = NULL,
@State as char(2) = NULL,
@Zip as char(5) = NULL,
@Email as varchar(100) = NULL,
@Send_Updates as smallint = '0'
AS
IF EXISTS
(SELECT FName, LName, Address1, Zip from MEMBERS WHERE FName = @FName AND LName = @LName AND Zip = @Zip)
BEGIN
RETURN
END
ELSE
BEGIN
INSERT INTO MEMBERS
(FName, LName, Address1, Address2, City, State, Zip, Email)
Values
(@FName, @LName, @Address1, @Address2, @City, @State, @Zip, @Email)
END
IF EXISTS
(SELECT MEMBER_ID FROM SW_REQUESTS WHERE MEMBER_ID = @@Identity)
BEGIN
RETURN
END
ELSE
BEGIN
INSERT INTO SW_REQUESTS
(MEMBER_ID, Send_Updates)
Values
(@@Identity, @Send_Updates)
END
GO
I have following query. Now I want to change this in such a way that if Condition 1 satisfies then it should not go to next condition ,if not then should go to next. Similarly the same format till condition 4.
select * from table where
IND = 'Y'
and
(
(STATE = @STATE and LOB =@LOB and COMPANY=@COMPANY)--Condition 1
OR
(STATE = @STATE and LOB =@LOB)--Condition 2
OR
(STATE = @STATE and COMPANY=@COMPANY)--Condition 3
OR
(STATE = @STATE)--Condition 4
)
I have the got below T SQL query to fetch the matching record
DECLARE @MappingTable TABLE
(
Productname nvarchar(10),
identification_key1 int,
identification_key2 int,
identification_key3 int
[Code] .....
-- result - 'Orange'
This is an exact matching record and straight forward
Is it possible to identify the record using T SQL query based on the following scenarios
1) return the record - If all the three where conditions match
2) if record not found check and return the record where 2 columns values in the where condition match
-- Expected Result for below query: 'Orange', because 2 of the columns in where condition have matching values
SELECT Productname
FROM @MappingTable where identification_key1=1 or identification_key2 =2 or identification_key3 =1
-- result - 'Orange'
Hi,
I have 1 table with 5 rows. One of the rows has dateTime values. I want to know how many rows there are with a value in that column < today AND how many rows there are with a value in that column > today.
I'm not sure how to do this.
SELECT Count(*) WHERE dateColumn <= today AND dateColumn > today gives me everything.
I like to end up with a column containing the count of rows <= today
and a column with rows where date > today.
Is this possible in SQL or do I have to retrieve all rows and then loop over the resultset and check each row?
Thanks,
Marc
My goal is to create a trigger to automatically set the value for a status id on a table based on set criteria. Depending on the values of other fields will determine the value that the status id field is assigned. So far, I have written the trigger to update the status id field and I go through a seperate Update statement for each status id value. The problem is that I can't get this to work at the record level. The problem that I am getting is that if I have 50 records in TABLE1 and at least one of them satisfies the where clause of the update statement, all of the records get updated. So, using these two update statements, all of my records end up with a status value of '24' because that was the last update statement run in the trigger. Here is the code I have so far:
CREATE TRIGGER dbo.JulieTrigger1
ON dbo.Table1
AFTER INSERT,UPDATE
AS
BEGIN
BEGIN TRY
/*Update Table1.Status to POTENTIAL (id 23) status */
UPDATE TABLE1
SET status_id = 23
WHERE EXISTS (SELECT *
FROM TABLE1 a INNER JOIN TABLE2 b
ON b.order_id = a.order_id
WHERE a.start_dt IS NULL
AND b.current_status_ind = 1
AND b.lead_status_id NOT IN (15,16)
AND a.order_id = TABLE1.order_id)
/*Update Table1.Status to ACTIVE (id 24) status */
UPDATE TABLE1
SET status_id = 24
WHERE EXISTS (SELECT *
FROM TABLE1 a
WHERE fill_ind = 1
AND (end_dt IS NULL OR end_dt > getdate() )
AND a.job_order_id = TABLE1.job_order_id)
END TRY
BEGIN CATCH
DECLARE @ErrorMessage NVARCHAR(4000);
DECLARE @ErrorSeverity INT;
DECLARE @ErrorState INT;
SELECT
@ErrorMessage = ERROR_MESSAGE(),
@ErrorSeverity = ERROR_SEVERITY(),
@ErrorState = ERROR_STATE()
IF @@TRANCOUNT > 0
ROLLBACK TRAN
-- Return the error to the calling object
RAISERROR (@ErrorMessage, -- Message text.
@ErrorSeverity, -- Severity.
@ErrorState -- State.
)
END CATCH
SET NOCOUNT ON;
END
GO
Thanks in advance for any help!
-Julie
Have a nvarchar column in ms sql that, based on user input, may or may not have a carriage return and a line break together (CHR(13)&CHR(10)), just a carriage return (CHR(13)), just a line break (CHR(10)). In using that column in ssrs, I need to find if any of the above exist and replace them with the string "x0Dx0A", "x0D", or "x0A" respectively.
I'm getting lost in this expression:
=SWITCH
( (InStr(Fields!Info.Value, CHR(13)&CHR(10) > 0, REPLACE(Fields!Info.Value, CHR(13)&CHR(10)), "x0Dx0A")), (InStr(Fields!Info.Value, CHR(13) > 0, REPLACE(Fields!Info.Value, CHR(13)), "x0D")), (InStr(Fields!Info.Value, CHR(10)
> 0, REPLACE(Fields!Info.Value, CHR(10)), "x0A")) )
Error is:
System.Web.Services.Protocols.SoapException: The Value expression for the textrun ‘Info.Paragraphs[0].TextRuns[0]’ contains an error: [BC30455] Argument not specified for parameter 'Replacement' of 'Public Function Replace(Expression As String, Find As String,
[Code] .....
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedHello, a small question. I have a search page on the site where the user can search for other users, they can fill in age, gender etc
The question is, how should i extract all that information from the database, i am using SP in MS SQL 2005, C#.
For each of the options is there a possibility to press "not specified", how do i build up a query in the sql server?
Should i just
IF (@Age1 <> '')BEGIN SET @SearchString = @SearchString + 'AND (profile_publicinfo.age = ' + @Age1 + ')'END
and then continue like this?
so it would look something like this:
SELECT username, gender, signupdate ..... FROM profile_publicinfo FULL OUTER JOIN ...... WHERE (@SearchString)
any ideas?
How would I create a sql statement with 3 or 4 counts which would represent 3 or 4 different columns in a datagrid?
For example
SQL = "SELECT Count(department_id) as "totals1" FROM nonconformance WHERE department_id = '1'"
How would I make additional counts in this SQL statement that looks for when department_id=2 and 3 etc....
Thanks
If I want to update 2 columns at 1 time with a where clause
like
update table a
set column1 = 8 and
set column2 = 9
where id = 10
I know you can't use the and statement, what is the correct syntax?
I have an SQL statement to find attractions between certain longitude and latitude values. The attraction i have already added to the database to test has values 51.502899 and 0.003552 for latitude and longitude. As you can see these values fall within the limits of the statement below but nothing is returned.
SELECT * FROM Attractions WHERE (Lat BETWEEN 51.51998 AND 51.49999) AND (Long BETWEEN 0.014 AND -0.006);
I have the following insert how can i execute to multiple databases on same server:
insert into Tablerecords(labelkey,moduletype,english,spanish,updatedby)
values('hypUnderConstruction','MENU','Under Construction','Under Construction','admin')
databases: db1,db2,db3,db4,db5 etc
Thanks.
Hello everyone
I am using MS SQL Server Management Studio Express. When I apply multiple insert statement, it doesn't allow me to do so. I have to do it one by one, which is time consuming.
Sample
INSERT INTO table (col_a,col_b) VALUES (1,1)
INSERT INTO table (col_a,col_b) VALUES (2,2)
INSERT INTO table (col_a,col_b) VALUES (3,3)
Any ideas? I want to do it in one go. Thank you very much.
I am trying to apply the logic from the following resource: URL....but cannot get it to work with my logic for some reason.For example, the following query:
;WITH CTE1 AS (SELECT CONVERT(VARCHAR, GETDATE(), 120) AS Col1),
CTE2 AS (SELECT CONVERT(VARCHAR, GETDATE(), 111) AS Col2)
SELECT CTE1.Col1,CTE2.Col2
FROM CTE1
CROSS JOIN CTE2
GO
Produces the following output:
Col1 | Col2
2014-05-08 10:55:54 | 2014/05/08
But, as soon as I try to do something else like:
;WITH CTE1 AS (SELECT COUNT(login) FROM userinfo AS Col1),
CTE2 AS (SELECT COUNT(login) FROM userinfo AS Col2)
SELECT CTE1.Col1,CTE2.Col2
FROM CTE1
CROSS JOIN CTE2
GO
I receive the following errors:
Msg 8155, Level 16, State 2, Line 1
No column name was specified for column 1 of 'CTE1'.
Msg 8155, Level 16, State 2, Line 2
No column name was specified for column 1 of 'CTE2'.
Are there limitations when trying to use multiple CTE in a single query?
I am trying write a query to update a column of data in my xLegHdr table however the update is based on multiple criteria. I was trying to use "IF..ELSE" statements but that is not working.
I would like to update the "SMiles" column based on the data in the "Dist" column. If the number in the "Dist" column is less than 250 then subtract 25 and multiply it by 1.15 the result should go in the "SMiles" column. If the number is grater than 250 then subtract 40 and multiply by 1.15 and place the result in the "SMiles" column; like so:
UPDATE xLegHdr
SET SMiles =
IF Dist<250 THEN Round(Dist-25)*1.15)
ELSE Round(Dist-40)*1.15)
END IF
Any ideas?
Is there a way to update all of the records in a table all at once using the results of a select of a different table's data?
For example.
There are two tables, each have a primary index of catnum. One table (invoice_items) contains the line items (catnum) of customer invoices. The other table (sales_history) is a sales history table. I want to select all data from the invoice_items and sum the sales for various time periods (sales_0to30days, sales_31to60days, etc.) I then want to update the sales_history table which has columns: catnum, sales_0to30, sales_31to60, etc.). I want to run this daily to update all records.
Any help would be appreciated. Many thanks.
>Hi,
>
>Thanks you for quick answer but we still the same problem special with names like the following exmple:
DECLARE @L_SQLCOMM VARCHAR(8000)
SET @L_SQLCOMM = 'SELECT * FROM AMASTER where ACCTNAME = (ala'a)'
EXEC(@L_SQLCOMM
"ala'a " is Arabic name in English characters.
Regards
Using SQLServer ver 7.0, two tables:TableA = contains all inventory dataTableB = contains four fields: ID, source, date_from, date_toThis is where multiple range of dates are populated.Sample 1:1,'A','9/1/2004','9/30/2004'Sample 2:2,'A','1/1/2003','3/31/2003'3,'A','10/1/2004','10/31/2004'Data populated on TableB varies.Sample SQL for Sample 1:SELECT *FROM TableAWHERE inventory_date BETWEEN (select DATE_FROM from TableB) AND (selectDATE_TO from TableB)Problem: How to approach sql statement based on Sample 2 above?
View 3 Replies View RelatedHi,
I'm new to SQL Server but not new to SQL because I used it with Oracle. I wonder if it is possible to do this kind of statement on SQL Server:
UPDATE TableX M
SET (M.column1, M.column2, M.column3)=
(SELECT T.column1, T.column2, G.column3)
FROM Table_Y T,
Table_Z G
WHERE join condition))
WHERE EXISTS (join condition for TableX)
Basically, I'd like to update multiple columns in one statement but for some reason I can not get it to work.
What would be the equivalent on SQL Server?
Thanks for the help,
Laszlo M