Multiple Conditions In A Query
Feb 2, 2008
Hi,
I've a table with a field named 'TypeOfProd' that has an ID for the various types of products: ex.:
1 - product A
2 - product B
3- product C
4 - product D
....
10 - product J
and so on
I need to create a stored procedure that querys only the product types selected by the user.
The user can select 1, 3, 5, 10 or 1, 3 or 3 or 0 for all or some other combination.
For the first user selection a have something like this
SELECT Prod FROM tableProd WHERE TypeOfProd = 1 OR TypeOfProd = 3 or TypeOfProd = 5 OR TypeOfProd = 10
For the second,
SELECT Prod FROM tableProd WHERE TypeOfProd = 1 OR TypeOfProd = 3
Is it possible to have a stored procedures that runs a query with this random scenario?
please help
Thanks
JPP
View 8 Replies
ADVERTISEMENT
Jan 10, 2008
My question is fairly simple. When I join between two tables, I always use the ON syntax. For example:
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId)
No problems there. However, if I then decide to further filter the selection based on some trait of the UserRole, I have two options: I can add the condition as a WHERE statement, or I can add the condition within the ON block.
--Version 1:
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId)
WHERE
UserRoles.Active = 'TRUE'
-- Version 2
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId
AND UserRoles.Active = 'TRUE')
So, the question is, which is faster/better, if either? The Query Analyzer shows the two queries have the exact same execution plan, which makes sense, since they're both joining the same tables. However, I'm wondering if adding the condition in the ON statement results in fewer rows the JOIN statement initially needs to join up, thus reducing the overall initial size of the results table before the WHERE conditions are applied.
So is there a difference, performance wise? I imagine that if Users had a thousand records, and UserRoles had 10 records, then the JOIN would create a cartesian product of the two tables, resulting in 10,000 records in the table before the WHERE conditions are applied. However, if only three of the UserRoles is set to Active, would that mean that the resulting table, before applying WHERE conditions, would only contain 3000 records?
Thanks for whatever information you can provide.
View 7 Replies
View Related
Jun 1, 2015
I have following query. Now I want to change this in such a way that if Condition 1 satisfies then it should not go to next condition ,if not then should go to next. Similarly the same format till condition 4.
select * from table where
IND = 'Y'
and
(
(STATE = @STATE and LOB =@LOB and COMPANY=@COMPANY)--Condition 1
OR
(STATE = @STATE and LOB =@LOB)--Condition 2
OR
(STATE = @STATE and COMPANY=@COMPANY)--Condition 3
OR
(STATE = @STATE)--Condition 4
)
View 4 Replies
View Related
Feb 6, 2015
I have the got below T SQL query to fetch the matching record
DECLARE @MappingTable TABLE
(
Productname nvarchar(10),
identification_key1 int,
identification_key2 int,
identification_key3 int
[Code] .....
-- result - 'Orange'
This is an exact matching record and straight forward
Is it possible to identify the record using T SQL query based on the following scenarios
1) return the record - If all the three where conditions match
2) if record not found check and return the record where 2 columns values in the where condition match
-- Expected Result for below query: 'Orange', because 2 of the columns in where condition have matching values
SELECT Productname
FROM @MappingTable where identification_key1=1 or identification_key2 =2 or identification_key3 =1
-- result - 'Orange'
View 4 Replies
View Related
Apr 15, 2014
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
View 4 Replies
View Related
Sep 12, 2006
Hi All.
Is there a way to have multiple AND conditions on the same field in a database.
EXAMPLE
SELECT * FROM tbl
WHERE field1 = 1 AND field1 = 2 AND field1 = 5
Thanks
View 9 Replies
View Related
Jul 20, 2005
Hi All,Just wondering if anyone can tell me if you can test for multipleconditions as part of an "IF" statement in T-SQL in SQL Server 2000?ie something like:IF @merr = 1 or @merr=2BeginSELECT statementUPDATE statementEndAny help much appreciated!Much warmth,M.
View 1 Replies
View Related
May 12, 2008
Select c.Plan, c.ClaimNumber
from tbFLags c inner join tbMembers m
On c.Claim = m.HistoryNum
where c.Plan = 'J318' and c.Paymon = c.Rmon and c.Rmon = '2008-03-01'
Now I want to add these into this statement, what should be done.
Members meeting any of the 3 sets of criteria should not be selected
1) tbFlags.Hosp='1'
2) tbFlags.RD='1' OR tbCMSFlags.RAType in ('D', 'I2')
3) Deceased = tbMembers.DOD is not null.
View 27 Replies
View Related
Jun 2, 2015
I am have a dimension to use as a slicer, I am trying to associate that dimension with a measure group using a calculated measure. I am using the below query:
With member [THD Inventory Balance] as
IIF(
[THD Conversion Units].[Conversion Units].CURRENTMEMBER = [THD Conversion Units].[Conversion Units].&[EA], [Measures].[thdpos - Inventory Balance EA], 0)
IIF(
[THD Conversion Units].[Conversion Units].CURRENTMEMBER = [THD Conversion Units].[Conversion Units].&[LF],
[Code] ....
But it fails with the error: The syntax for 'IIF' is not correct.
View 6 Replies
View Related
Nov 12, 2007
I have a ListBox controls that contains about 5 items. A stored procedure is executed based on selections of other controls ont he screen, but I cann't figure out how to properly get the dynamically selected conditions passed to the sproc from C#.
If a user selects 3 of the five items, the sproc needs to build something like this:
WHERE Region LIKE Item1 OR Region LIKE Item2 OR Region LIKE Item3
I cannot figure out how to do this. It works properly if I just make the ListBox SelectionMode as Single and pass that one selected item's value.
Any help is greatly appreciated.
Thanks,
Chris
View 3 Replies
View Related
Nov 22, 2007
Hi,
I am attempting to explain my probelm again. Please read it:
I have 3 tables. CallDetail, Call and Request. The tables are populated in the following order: One row for CallDetail, One for Call and one for Request and so on.
I have to generate a UniqueNo - Per empid, Per StateNo, Per CityNo, Per CallType. The no will remain same for the same CallDetailID and ordered by the date created. However if the CallDetailId changes, the no. will increment based on the empid, Per StateNo, Per CityNo, Per CallType
For eg:
For Eg: ( Assume Call Detail id is changing for all the days)
Monday - 3 calls made for empid 1, state SA023, city 12 and call type 1 will generate a unique id 1 for all 3 calls
Tuesday - 2 calls made for empid 1, state SA023, city 12 and call type 1 will generate a unique id 2 for both calls
Wednesday - 3 calls made for emp id 1, state SA023, city 12 and call type 2 will generate a unique id 1 for 3 calls as the call type is different than the previous day for same employee
Thursday - 2 calls made for empid 2, state SA023, city 13 and call type 1 will generate unique id 1 for both the calls as combi of city and call type are different.
So the unique id has to be generated considering empid, state, city and call type, ordered by the EntryDt. EntryDt is needed because :
3 calls made for empid 1, state SA023, city 12 and call type 1 at 10/11/2007 10.00 AM will generate a unique id 1 for all 3 calls
2 calls made for empid 1, state SA023, city 12 and call type 1 at 10/11/2007 12.00 AM will generate a unique id 2 as the call was registered later.
Here is what I wrote with the help of a mod over here:
Code Block
DECLARE @Request TABLE(RequestID INT, CustomerName VARCHAR(30),
StateNo NVARCHAR(5), CityNo INT, CallID INT, UniqueNo INT)
INSERT @Request
SELECT '324234', 'Jack', 'SA023', 12, 111, Null UNION ALL
SELECT '223452', 'Tom', 'SA023', 12, 112, Null UNION ALL
SELECT '456456', 'Bobby', 'SA023', 12, 114, Null UNION ALL
SELECT '22322362', 'Guck', 'SA023', 12, 123, Null UNION ALL
SELECT '22654392', 'Luck', 'SA023', 12, 134, Null UNION ALL
SELECT '225652', 'Jim', 'SA023', 12, 143, Null UNION ALL
SELECT '126756', 'Jasm', 'SA023', 12, 145, Null UNION ALL
SELECT '786234', 'Chuck', 'SA023', 12, 154, Null UNION ALL
SELECT '66234', 'Mutuk', 'SA023', 12, 185, Null UNION ALL
SELECT '2232362', 'Buck', 'SA023', 12, 195, Null
DECLARE @Call TABLE(CallID INT, CallType INT, CallDetailID INT)
INSERT @Call
SELECT 111, 1, 12123 UNION ALL
SELECT 112, 1, 12123 UNION ALL
SELECT 114, 1, 12123 UNION ALL
SELECT 123, 2, 12123 UNION ALL
SELECT 134, 2, 12123 UNION ALL
SELECT 143, 1, 6532 UNION ALL
SELECT 145, 1, 6532 UNION ALL
SELECT 154, 1, 6532 UNION ALL
SELECT 185, 2, 6532 UNION ALL
SELECT 195, 3, 6532
DECLARE @CallDetail TABLE(CallDetailID INT, EmpID INT, EntryDt DateTime)
INSERT @CallDetail
SELECT 12123, 1, '11/5/2007 10:41:34 AM' UNION ALL
SELECT 6532, 1, '12/5/2007 12:12:34 PM'
-- Query written with help of a helpful person here
UPDATE r
SET r.UniqueNo = dt.CallGroup
FROM @Request r
JOIN @Call c
ON r.CallID = c.CallID
JOIN (SELECT
CallDetailID,
EntryDt,EmpID,
CallGroup = ROW_NUMBER() OVER (ORDER BY EntryDt )
FROM @CallDetail
) dt
ON c.CallDetailID = dt.CallDetailID
select * from @Request
OUTPUT IS
324234 Jack SA023 12 111 1
223452 Tom SA023 12 112 1
456456 Bobby SA023 12 114 1
22322362 Guck SA023 12 123 1
22654392 Luck SA023 12 134 1
225652 Jim SA023 12 143 2
126756 Jasm SA023 12 145 2
786234 Chuck SA023 12 154 2
66234 Mutuk SA023 12 185 2
2232362 Buck SA023 12 195 2
Where as it should be
324234 Jack SA023 12 111 1
223452 Tom SA023 12 112 1
456456 Bobby SA023 12 114 1
22322362 Guck SA023 12 123 1
22654392 Luck SA023 12 134 1
225652 Jim SA023 12 143 2
126756 Jasm SA023 12 145 2
786234 Chuck SA023 12 154 2
66234 Mutuk SA023 12 185 2
2232362 Buck SA023 12 195 1
as the call for Buck is of calltype 3 which was not done earlier. So the no starts from 1.
Also how to add the paritioning by empid, StateNo, Per CityNo, Per CallType and yet maintain the same unique no for the same calldetailid.
Eg: CallGroup = ROW_NUMBER() OVER (PARTITION BY empid, state, city, calltype ORDER BY EntryDt )
thanks for any help.
View 4 Replies
View Related
Mar 19, 2008
Hi,
I have a tbl called BANK.
This shows a banking history of transactions and includes a field called TransType and a field called PaymentID.
I also have two other tables called Suppliers and SubContractors.
For each record in the bank, I need to match up a record in either the suppliers or subcontractors tbl based on the PaymentID value. I know if the record relates to either a Supplier or Subcontractor based on the value of the TransType field which will be either SUPPLIER or SUBCONTRACTOR or Null (in which case a match doesn't matter)
I have a working query based on joining just the Supplier tbl.. but how do I do the join to the other tbl aswell?
So overall, for each record in the bank, if the transtype is SUPPLIER I need to look in the supplier tbl for a match for that paymentID, and if the transtype is SUBCONTRACTOR, I need to do the same but in SUBCONTRACTOR tbl.
How would I best write that?
thanks for any help!
View 5 Replies
View Related
Dec 12, 2007
I have a table (GLTRANS) with thousands of lines.
1 column in the table (ACCNO) has 300 different values which all need to change to a new value.
ie. 11100 all change to 8100
11200 all change to 8200
I know how to do a simple UPDATE
UPDATE GLTRANS
SET ACCNO = '8100'
WHERE ACCNO = '11100'
But how can i combine into 1 script rather than having to continually change this script 300 times??
Thanks
Wilbur
View 6 Replies
View Related
Jan 6, 2004
I have a record that I want to insert into (2) tables. The first thing I want to do is see if a record already exists in the table for the user, if it does - I just want to skip over the insert.
next I want to do the same thing in the SW_REQUEST table. If there is a record in there for the member, I want to just skip the insert.
My code works as long as there isn't an existing record in the tables. Can someone give me a hand?
Here's what I have (and it doesn't work)
CREATE PROCEDURE b4b_sw_request
@FName as varchar(50)= NULL,
@LName as varchar(50)=NULL,
@Address1 as varchar(100) = NULL,
@Address2 as varchar(100) = NULL,
@City as varchar(50) = NULL,
@State as char(2) = NULL,
@Zip as char(5) = NULL,
@Email as varchar(100) = NULL,
@Send_Updates as smallint = '0'
AS
IF EXISTS
(SELECT FName, LName, Address1, Zip from MEMBERS WHERE FName = @FName AND LName = @LName AND Zip = @Zip)
BEGIN
RETURN
END
ELSE
BEGIN
INSERT INTO MEMBERS
(FName, LName, Address1, Address2, City, State, Zip, Email)
Values
(@FName, @LName, @Address1, @Address2, @City, @State, @Zip, @Email)
END
IF EXISTS
(SELECT MEMBER_ID FROM SW_REQUESTS WHERE MEMBER_ID = @@Identity)
BEGIN
RETURN
END
ELSE
BEGIN
INSERT INTO SW_REQUESTS
(MEMBER_ID, Send_Updates)
Values
(@@Identity, @Send_Updates)
END
GO
View 2 Replies
View Related
Jul 8, 2015
I have a table with the following fields and data:
Offense, Year, Month, Count, Amount
F 2007 January 11 $49,238.00
F 2007 February 12 $24,000.00
F 2007 March 31 $55,184.00
F 2007 April 19 $64,647.00
F 2007 May 33 $100,010.00
F 2007 June 16 $59,678.00
F 2007 July 22 $39,700.00
F 2007 August 3 $9,000.00
F 2007 September 4 $75,000.00
F 2007 October 8 $19,250.00
F 2007 November 50 $106,153.00
F 2007 December 26 $80,000.00
I have data for years 2007-2014. I am designing an SSRS report, and want to use IIF statement to return data. Using the following:
=IIF(Fields!Year.Value="2007" AND Fields!Month.Value="February", "return value of count field", "n/a")
The above does not work, it doesn't return the value of Count field, it does return the n/a.
View 14 Replies
View Related
Jun 5, 2008
Hi,
I have 1 table with 5 rows. One of the rows has dateTime values. I want to know how many rows there are with a value in that column < today AND how many rows there are with a value in that column > today.
I'm not sure how to do this.
SELECT Count(*) WHERE dateColumn <= today AND dateColumn > today gives me everything.
I like to end up with a column containing the count of rows <= today
and a column with rows where date > today.
Is this possible in SQL or do I have to retrieve all rows and then loop over the resultset and check each row?
Thanks,
Marc
View 2 Replies
View Related
Sep 6, 2007
My goal is to create a trigger to automatically set the value for a status id on a table based on set criteria. Depending on the values of other fields will determine the value that the status id field is assigned. So far, I have written the trigger to update the status id field and I go through a seperate Update statement for each status id value. The problem is that I can't get this to work at the record level. The problem that I am getting is that if I have 50 records in TABLE1 and at least one of them satisfies the where clause of the update statement, all of the records get updated. So, using these two update statements, all of my records end up with a status value of '24' because that was the last update statement run in the trigger. Here is the code I have so far:
CREATE TRIGGER dbo.JulieTrigger1
ON dbo.Table1
AFTER INSERT,UPDATE
AS
BEGIN
BEGIN TRY
/*Update Table1.Status to POTENTIAL (id 23) status */
UPDATE TABLE1
SET status_id = 23
WHERE EXISTS (SELECT *
FROM TABLE1 a INNER JOIN TABLE2 b
ON b.order_id = a.order_id
WHERE a.start_dt IS NULL
AND b.current_status_ind = 1
AND b.lead_status_id NOT IN (15,16)
AND a.order_id = TABLE1.order_id)
/*Update Table1.Status to ACTIVE (id 24) status */
UPDATE TABLE1
SET status_id = 24
WHERE EXISTS (SELECT *
FROM TABLE1 a
WHERE fill_ind = 1
AND (end_dt IS NULL OR end_dt > getdate() )
AND a.job_order_id = TABLE1.job_order_id)
END TRY
BEGIN CATCH
DECLARE @ErrorMessage NVARCHAR(4000);
DECLARE @ErrorSeverity INT;
DECLARE @ErrorState INT;
SELECT
@ErrorMessage = ERROR_MESSAGE(),
@ErrorSeverity = ERROR_SEVERITY(),
@ErrorState = ERROR_STATE()
IF @@TRANCOUNT > 0
ROLLBACK TRAN
-- Return the error to the calling object
RAISERROR (@ErrorMessage, -- Message text.
@ErrorSeverity, -- Severity.
@ErrorState -- State.
)
END CATCH
SET NOCOUNT ON;
END
GO
Thanks in advance for any help!
-Julie
View 1 Replies
View Related
Nov 18, 2015
Have a nvarchar column in ms sql that, based on user input, may or may not have a carriage return and a line break together (CHR(13)&CHR(10)), just a carriage return (CHR(13)), just a line break (CHR(10)). In using that column in ssrs, I need to find if any of the above exist and replace them with the string "x0Dx0A", "x0D", or "x0A" respectively.
I'm getting lost in this expression:
=SWITCH
( (InStr(Fields!Info.Value, CHR(13)&CHR(10) > 0, REPLACE(Fields!Info.Value, CHR(13)&CHR(10)), "x0Dx0A")), (InStr(Fields!Info.Value, CHR(13) > 0, REPLACE(Fields!Info.Value, CHR(13)), "x0D")), (InStr(Fields!Info.Value, CHR(10)
> 0, REPLACE(Fields!Info.Value, CHR(10)), "x0A")) )
Error is:
System.Web.Services.Protocols.SoapException: The Value expression for the textrun ‘Info.Paragraphs[0].TextRuns[0]’ contains an error: [BC30455] Argument not specified for parameter 'Replacement' of 'Public Function Replace(Expression As String, Find As String,
[Code] .....
View 2 Replies
View Related
Aug 22, 2007
I have a Columns like
RegionAmount
Asia5600
Asia6500
Asia1000
US8900
US4400
US6700
Europe4500
Europe2400
Europe1600
Africa6200
Africa6400
Africa6900
i want to execute a query with conditions...like
if Region==Asia then compute percent of Amount
if Region==US then compute percent of Amount
if Region==Europe then compute percent of Amount
if Region==Africa then compute percent of Amount
the result set to be displayed something like
Column---Amount---PercentAmount
thanks a lot!
pavan
View 5 Replies
View Related
Nov 6, 2006
I have a query with many (approximately, 30) conditions, such as:
select ....... from table1 join table2 on ( (table1.field1 = table2.field1 OR table1.filed1 IS NULL) AND (table1.field2 = table2.field2 OR table1.filed2 IS NULL) )
My question is:
In C++ or C#, when I write a condition like this, say, in an IF or WHILE, I know that I would be better off specifying the IS NULL (well, == null, to be precise) first, and use | instead of ||. In that case, the first condition (equality to null) is checked first, it's fast, and if it's not satisfied, the control flow goes to the next statement.
The question is, is there the same rule in T-SQL?
I mean, if I put the "... IS NULL" first, and then "OR ... = ...", will the query run faster than if I write it the other way around (that is, "... = ... OR ... IS NULL")?
This is very important to me, because most of those fields are VARCHAR, and due to some business rules, I can't change them to numerics etc, which would be compared much faster than text. So, even if I use full text search, I still need to find a way to optimize the query for performance...
By the way, I know that I can put those conditions in the WHERE clause, but as far as I know it won't make much of a difference for performance. So, my question is primarily about the order of conditions, in which SQL Server constructs its query plan.
[Edited:] In other words, what runs faster: comparing varchar to null or comparing varchars? And does it make a difference if I switch their places in my sql script?
We are using SQL Server 2000 SP4, Standard Edition. [Dev edition on the dev machine.]
Could someone kindly advise me on this, please?
Thank you ever so much.
View 4 Replies
View Related
Mar 20, 2008
On a webpage, there are filters to choose from. Like date, amount, SSN (multiple filters can be choosen).I have a single query so far. SqlCommand cmd = new SqlCommand("SELECT [column1], [column2], [column3], [column4], [column5] FROM [table] WHERE [column4] = 'condition4' AND [column5] = @total_bill AND [last_change] >= @txtStartDate AND [last_change] <= @txtEndDate ", Conn) ; cmd.Parameters.Add(new SqlParameter("@total_bill", total_bill1.Text)); cmd.Parameters.Add(new SqlParameter("@txtStartDate", txtStartDate.Text)); cmd.Parameters.Add(new SqlParameter("@txtEndDate", txtEndDate.Text)); I want to break the query so that it executes on the basis of different sets of conditions (filters). If I dont select date filter, then the above query will not execute properly.Please help.
View 2 Replies
View Related
Jul 1, 2015
TABLE DEFINITION
Column NameComments
CustomerIDINT
SequenceNoINT
CommentsVARCHAR(MAX)
CUSTOMER TABLE
CustomerIDSequenceNoComments
11ABC D
12CDE
13ABC
14ABC D
15CDE
16abc
27ABC DEF
28
29ABC DEF
210DEF
211XYZ 123
212ABC
313PQ RST
OUTPUT
CustomerIDSequenceNoComments
13ABC
14ABC D
15CDE
16abc
28
29ABC DEF
210DEF
211XYZ 123
212ABC
313PQ RST
Records should be filtered by
1.Display only Unique Comments from Customer Table for all the customers,
2.If Comments are same then display the row which has maximum SequenceNo
View 2 Replies
View Related
Apr 21, 2015
I have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
View 6 Replies
View Related
Sep 8, 2006
I have just taken over the job of sorting out a rather poorly designed database. It looks like it was 'upsized' from an access database to the SQL server. The SQL server is the 2000 version.
Now I am trying to generate a report of what the students in the database are owing by referencing the Receipt table and then all the available payment methods and allocations. I was wondering if there was anyway to work out data being displayed twice (Let me demonstrate)
Note1: All the tables are linked by a key of ReceiptNo. From what I can see there is a table for every payment type and allocation but no link between the two other then the receipt number.
Using the query:
SELECT T_Receipt.ReceiptNo, T_cheque.Amount AS Chq_Amount, T_credit.Amount AS Cre_Amount, StandingOrder.Amount AS Stn_Amount,
T_BankTransfer.amount AS Bnk_Amount, T_cash.TotalAmount AS Cas_Amount, T_RentPayment.AmountPayed AS Ren_Paid,
T_AdminPayment.AmountPaid AS Adm_Paid, T_InternetBilling.Total AS Int_Paid, T_Utilities.AmountPaid AS Util_Amount,
T_InvoicePayment.amountPaid AS Inv_Paid, T_OtherPayments.paymentAmount AS Oth_Paid, T_parkingBill.paymentAmount AS Prk_Paid,
T_TelephoneBills.TelephoneCredit AS Tel_Paid, T_DepositPayment.[Deposit payment] AS Dep_Amount, T_Receipt.cancelled AS Canceled,
T_Receipt.RemittanceReceiptNo AS Rec_Ref, T_Receipt.Student
FROM T_Receipt INNER JOIN
T_DepositPayment ON T_Receipt.ReceiptNo = T_DepositPayment.receiptNo LEFT OUTER JOIN
T_RentPayment ON T_Receipt.ReceiptNo = T_RentPayment.RentPaymentNo LEFT OUTER JOIN
StandingOrder ON T_Receipt.ReceiptNo = StandingOrder.ReceiptNo LEFT OUTER JOIN
T_TelephoneBills ON T_Receipt.ReceiptNo = T_TelephoneBills.ReceiptNo LEFT OUTER JOIN
T_parkingBill ON T_Receipt.ReceiptNo = T_parkingBill.ReceiptNo LEFT OUTER JOIN
T_OtherPayments ON T_Receipt.ReceiptNo = T_OtherPayments.ReceiptNo LEFT OUTER JOIN
T_InvoicePayment ON T_Receipt.ReceiptNo = T_InvoicePayment.receiptNo LEFT OUTER JOIN
T_cash ON T_Receipt.ReceiptNo = T_cash.ReceiptNo LEFT OUTER JOIN
T_AdminPayment ON T_Receipt.ReceiptNo = T_AdminPayment.ReceiptNo LEFT OUTER JOIN
T_BankTransfer ON T_Receipt.ReceiptNo = T_BankTransfer.receiptNo LEFT OUTER JOIN
T_Utilities ON T_Receipt.ReceiptNo = T_Utilities.receiptNo LEFT OUTER JOIN
T_credit ON T_Receipt.ReceiptNo = T_credit.ReceiptNo LEFT OUTER JOIN
T_cheque ON T_Receipt.ReceiptNo = T_cheque.ReceiptNo LEFT OUTER JOIN
T_InternetBilling ON T_Receipt.ReceiptNo = T_InternetBilling.ReceiptNo
GROUP BY T_Receipt.Student, T_Receipt.ReceiptNo, T_cheque.Amount, T_credit.Amount, StandingOrder.Amount, T_BankTransfer.amount, T_cash.TotalAmount,
T_AdminPayment.AmountPaid, T_InternetBilling.Total, T_Utilities.AmountPaid, T_InvoicePayment.amountPaid, T_OtherPayments.paymentAmount,
T_parkingBill.paymentAmount, T_TelephoneBills.TelephoneCredit, T_Receipt.cancelled, T_Receipt.RemittanceReceiptNo,
T_DepositPayment.[Deposit payment], T_RentPayment.AmountPayed, T_Receipt.Student
HAVING (T_Receipt.Student LIKE N'06%')
Which gives a result of:
RecNo.
30429
Cheque
250
Deposit
250
30429
679.98
250
This is fine but when I do analysis on this it appears as though the student has paid two deposit payments. I was wondering with out querying each table independently from an application if there was a criteria to specify that I only get one deposit result.
So as such say, give me all the payments but I only want one result from the other tables. I though about discrete but that wouldn't work here.
View 3 Replies
View Related
Mar 17, 2006
Howdy folks. I have a SELECT question for you. Or maybe a WHERE question. That I am not sure is part of the problem. My application is ASP.NET 2.0, and I’d like to avoid getting into stored procedures right now, if I could.
I am trying to summarize the order status for each customer in the database (SQL Server 2005, by the way). I want to provide two counts: the number of open jobs per customer, and the number of rush jobs per customer. Something like this:
CustID CustName JobOpen JobRush
----------------------------------------------------------------
22 John Deere 47 3
24 MCP 32 7
37 BlueON 6 0
In my noobness, I developed this:
SELECT CustID, MAX(CustName) AS CustName,
COUNT (*) AS JobOpen
FROM Customers
INNER JOIN Jobs ON JobCustID = CustID
WHERE (JobDone = 0)
GROUP BY CustID
As you can see, it finds from the Jobs table all jobs that are not done (JobDone is a T/F field), joins the Jobs and Customers tables, groups by CustID, and counts the totals in each CustID group. It works great in outputting the first three columns that I am looking for.
But I cannot come up with a simple way to add JobRush (also a T/F field), because it needs a different WHERE clause than the one JobOpen uses. It would need
WHERE (JobRush = 1)
So maybe my question should be: how do I use multiple WHERE clauses, each with its own COUNT?
I did mess around with Common Table Expressions, and managed to build two CTEs (one with JobOpen results and the other with JobRush results) that I joined together. It worked in Studio Manager, but my ASP.NET page didn’t like it. I guess that means I could learn stored procedures, but wow I’d love to just have a nice complete SELECT command for my page.
Thanks for reading all this. Any input is greatly appreciated.
Matt
View 3 Replies
View Related
Oct 6, 2015
SQL Server 2012 Performance Dashboard Main advices me this:
Since the application is from a vendor and I have no control over its code, how can improve this sitation?
View 3 Replies
View Related
Oct 30, 2015
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
View 0 Replies
View Related
Nov 7, 2007
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID
FROM tableU u
LEFT JOIN tableW w ON w.workgroupID = u.workgroupID
WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
View 1 Replies
View Related
Jun 9, 2008
Hi,
I remember seeing a fancy query that checked for multiple fields in a table (I think using a select statement in the where clause but not sure), but can't remember how to do it... here is what I want to do (and maybe there is a much easier way). Thanks!
Table1
id item color
1 shoe red
2 shoe blue
3 coat green
4 coat black
Table2
item color
shoe red
coat green
I want everything in Table1 where item and color are not a match.
So my results should be:
2 shoe blue
4 coat black
I'm sorry if this is a dumb question... it's been that kind of a day!
Thanks!
View 1 Replies
View Related
Aug 22, 2005
Hi,New to .Net and SQL. I have two tables that I have joined together. RentalControl_Main has the rental informationd and an Adjuster ID that links to the ADjuster table and the adjusters name. I am trying to create a report that gives the "Single" adjuster name and the totals for all of their contracts. I have a details report that gives each contract info. for each specific adjusters rentals. However, I want to just list the adjuster once and give all of their totals. In my SQL statement I have all of it written out and just need to knowwhat to do in place of 'Alex Early' that will give me all of the distinct adjusters.Do I need to code this on the page with a do while loop?Appreciate any help.SELECT SUM(dbo.RentalControl_Main.Rate) / COUNT(dbo.RentalControl_Main.Rate) AS AmtAvg, SUM(dbo.RentalControl_Main.DaysBilled) / COUNT(dbo.RentalControl_Main.DaysBilled) AS DayAvg, SUM(dbo.RentalControl_Main.Rate * dbo.RentalControl_Main.DaysBilled) / COUNT(dbo.RentalControl_Main.Rate) AS TotAvgFROM dbo.RentalControl_Main INNER JOIN dbo.RentalControl_Adjuster ON dbo.RentalControl_Main.AdjusterID = dbo.RentalControl_Adjuster.AdjusterIDWHERE (dbo.RentalControl_Adjuster.AdjusterName = 'Alex Early' AND (dbo.RentalControl_Main.DateClose IS NOT NULL) AND (dbo.RentalControl_Main.AgencyID = '2')
View 1 Replies
View Related
Aug 7, 2007
I have a table
CREATE TABLE [dbo].[CmnLanguage]( [Id] [char](2) NOT NULL CONSTRAINT PkCmnLanguage_Id PRIMARY KEY, [EnglishName] [varchar](26) NOT NULL, [NativeName] [nvarchar](26) NOT NULL, [DirectionType] [smallint] NOT NULL, [IsVisible] [bit] NOT NULL, [CreatedDateTime] [datetime] NOT NULL DEFAULT GETDATE(), [ModifiedDateTime] [datetime] NULL)
We will use these 3 queries
select * from CmnLanguage where IsVisible = 0select * from CmnLanguage where IsVisible = 1select * from CmnLanguage
I want to make a method which handles these queries.
But at the back end on Stored Procedures
We have to write 3 queries
Which I don't want to do.
I want to minimize the queries and conditions
and want to just write one for these 3
Can any one do it?
View 2 Replies
View Related
May 31, 2000
Folks,
I'm having some real problems using the OR condition in a very simple SQL statement and could use your help or insight on where the problem lies, or perhaps a workaround.
I have a large flat table in a SQL 7 database with 10 million + records called "HISTORY". I have not installed either service pack 1 or 2. I'm attempting to run a query that references the following four fields which are all non-clustered keys:
EQUIPMENT_NO TEXT 12
CHASSIS_IN TEXT 12
CHASSIS TEXT 12
SVC_DATE_TIME SMALLDATETIME
Here's the SQL statement:
SELECT * FROM HISTORY WHERE (HISTORY.EQUIPMENT_NO = 'XYZ123' OR HISTORY.CHASSIS = 'XYZ123' OR HISTORY.CHASSIS_IN = 'XYZ123') AND SVC_DATE_TIME >= '01/15/00 00:00:00 AM' AND SVC_DATE_TIME <= '02/28/00 23:59:59 PM'
ORDER BY EQUIPMENT_NO
This query takes 11 min. 5 sec. inder the Query Analyzer and ultimately returns the 31 desired records.
If you remove the SVC_DATE_TIME criteria, about 350 records are returned in a matter of seconds. I've also tried variations on the date syntax such as '01/15/00', etc. with no change in the amount of time to execute.
Other queries such as a simple AND condition combining EQUIPMENT_NO and SVC_DATE_TIME are snappy.
Are there known problems/bugs with "OR" conditions in queries that anyone is aware of, particularly with parentheses; am I composing this query incorrectly? Is there some alternate syntax that would work as expected? I can't see where the query shouldn't execute quickly as expected, particularly with all indexed fields involved. I'm stumped! Lend me your expertise. Thanks much.
Clark R. Farabaugh, Jr.
Financial Systems Analyst
VIT
Norfolk, VA
View 8 Replies
View Related
Nov 29, 2007
Hai frns small help needed.
I have a table called sample and i have the following requirement. i.e i need sum(credit) group by ssn no.
One special condition is as follows:
For each distinct ssn if "flag" has the same CX value,then out of all the records with the same CX value, the highest "credit" value is added to the sum for that "ssn" and the rest are ignored.
If while adding "credit" to the sum and if "credit" value is equal to zero then "sum" value is used for summing else "credit" value is used.
Can any one help me out in trying this logic. I have tried but i could'nt able embed the conditions inbetween the Sql statetment.
Here is the query is used
select * from sample
idssncreditflagsem
11010C90
21014C93
31014.5C92
41013.5C11
51024.2C33
61030C12
select ssn,flag,sum(case credit when 0 then sem else credit end) as sum from sam2
group by ssn,flag
ssn flag sum_val
101C13.5
103C12.0
102C34.2
101C98.5
The above output is wrong one.
Expected output
101 4.5+3.5=8.0
102 4.2
103 2.0
Any help would be appreciated
Regards,
View 5 Replies
View Related
