Multiple Customers (with Multiple Sql Instances) On 1 Reporting Server
Dec 3, 2007
Hi,
I think this is a question for the specialists among us.
Can I use one general reporting server (installed on instance MAINREPORTING)
for multiple customers who all have their own sql instance (CUST1, CUST2, CUST3, ..)
I would use UserAuthenciation on the reportserver url to display the specific reports customers can use.
Is this possible, and what do i have to take care off concerning installation and/or configuration (especially on
the reporting side) ?
Greetings
Vinnie
View 3 Replies
ADVERTISEMENT
Dec 17, 2007
Hello all,
I am trying to built a general demo machine for our multiple resellers.
Is it possible to have multiple database instances (one per reseller) with each of them their own reporting instance, running on the same server (also same IIS). In our DNS and in the IIS settings i will reroute the specific reseller to his specific reporting url (eg: http://www.demosite.reseller1.com/reports (this is not a real url), will be rerouted via dns to the
specific reporting url for reseller one ... and so on.)
Each reseller must be able to has it own reports, subscriptions, models and access to reportbuilder.
Can this be accomplished ?
I have tried already a few times but get stuck when i want to upload reports/datasources to the specific websites. Also i have encountered the fact that if i succeed in uploading data to one reporting site and i want to upload different data to
another site, the initial site is also changed with the data of the second upload.
Can anyone point me into the right direction how to solve this problem .
Greetings
Vinnie
View 7 Replies
View Related
Oct 1, 2007
I am facing a reporting service issue.
System information:
1. Our Reporting Server installed on a DB server.
2. We have one windows application which executes on the same server, which generates the reports snapshots.
3. One set of reports with single Shared data source
Scenario:
We have many countries for which report history snapshots needs to be generated. The report information is stored in different databases named as database_CountryCode on the same DB server.
Questions:
1. We need to dynamically change the shared data source connection string to point to the respective country database, when generating the report for that particular country. --> We found out this can be accomplised by using parameterized connection string in report specific data sources in SQL 2005. Can we achive something similar in SQL 2003 Reports as well?
2. We also need to instantiate the reporting service web service in multiple threads, one for each country, where in each thread picks up the corresponding country code, changes the connection string and generates reports snapshots. Can this be accomplished? I know this goes against the entire idea of licensing, but my question is just about feasibility of this idea.
Addnl Info
The CreateReportHistorySnapshot method of reportingservice.asmx returns a snapshotID, which is the timestamp of report snapshot creation. We tried creating the same report snapshot for the same country in 2 threads. Whenever the timestamp for both snapshots was same, only one report snapshot actually got created. Can this be overcome?
View 1 Replies
View Related
Feb 19, 2013
I have a large table that tells me customers and mailings (~4 million rows). So for each customer, I see what mailing(s) they received. It is at the mailing level so if a customer received 2 mailings, their will be 2 records for that customer number, one for each mailing they received. There are 3 different mailings.I am trying to calculate the count of customers that received all 3, as well as those that received 1&2 only, 1&3 only, and 2&3 only. For example:
CustNo Mailing
Tim 1
Tim 3
Dan 1
Dan 3
Jane 1
Max 1
Max 2
Max 3
Lauren 2
Lauren 3
Results:
All 3 - 1
1&2 only - 0
1&3 only - 2
2&3 only - 1
I have tried doing some funky table joining and EXISTS, but the query runs and runs because of how much data it has to sift through. Here is the code I am using to find Mailing 1&2 only customers, but I am not even sure it is getting me the right numbers. There are 2 different types of customers as well which is why I have custtype in there.
Code:
select a.custtype,count(distinct a.custno)
from myTable a
inner join (select distinct custno from mytable where [mailing]=2) b
on a.custno=b.custno
where a.[mailing]=1
and not exists(select * from myTable c where a.custno=c.custno and c.[mailing]=3)
group by a.custtype
View 14 Replies
View Related
Jul 23, 2005
Hello All,I do not know if this is the proper group to ask my question. Please dodirect me to the proper place.I have a database server and would like to store data for multiplegroups of customers. The data is not shared amongst the groups but areshared only amongst individuals composing a group.One solution would be to lump all data from all groups into a singleinstance of the database server accompanied with a tag that wouldidentify to which group each piece of information belongs.Is there a better method to achieve what I want to do. Would mysolution present any difficulties in the future in terms of performance,maintenance, scalability.Are there other solutions that may be available to address my needs.Any suggestions would be greatly appreciated.Thanks
View 3 Replies
View Related
May 22, 2001
I am running SQL 7.0 as the default instance and SQL 2K as a named instance. Each is using a different port....7.0 is using port 1433 and 2K is using 1024. Everything appears to be up and running fine on the server. However, I am not able to access the 2K instance from a client. I have tried to use both TCP IP and named pipes setting them up using the server network utility and the client network utility. No luck anywhere. I continue to get connection errors...check network documentation...
ANY IDEAS??????
View 3 Replies
View Related
May 8, 2008
Is there any limit on SQL server Multiple Instances? if we require to run 60+ Instances on single machine what will be the minimum hardware requirements.
View 3 Replies
View Related
May 12, 2002
Dear Listers,
1.) Is it possible to install Analysis Services on multiple SQL Server 2000 instances? If it is, then can you instruct me as to how to perform the install. If it is not possible, then does one restrict access to cube data via the Database Role Manager?
ie. The host box is - DOILAB30 with Analysis Services & SP2
Instance - DOILAB30/DOILAB30_FIN (Can AS be installed here?)
Do I severely restrict the membership of OLAP Admins?
2). Re. AS maintenance. - How do I backup and restore OLAP dbs/cubes etc. Following a restore, what issues, such as cube users/permissions should I be aware of? (if any).
TIA
John
View 1 Replies
View Related
May 31, 2007
Hello,
There are several instances in SQL Server. I use RDA method to access SQL Server from mobile devices. But RDA method only gets the server IP,not the instance name. So, how can I define RDA to access to the instance that I need?
View 3 Replies
View Related
Oct 6, 2011
I have a list of customers in my Customers table. What I am looking to do is to create QR codes for each customer in Reporting Services. I need to include the customer name, address, postcode, telephone number and contact name.
View 5 Replies
View Related
Oct 29, 2007
Hi all,
Can a MIRROR server have mirrored databases on many instances or must all of the mirrored databases on a server reside on one instance?
This initial implementation worked fine:
PRINCIPAL ServerPROD1instance01 endpoint1430
MIRROR ServerDRinstance01 endpoint1440
WITNESS ServerZ endpoint1450
This second implementation (different PRINCIPAL server to same MIRROR but to a different instance)
PRINCIPAL ServerPROD2instance5 endpoint1430
MIRROR ServerDRinstance02 endpoint1440 <<same mirror server but different instance
WITNESS ServerZ endpoint1450
I know that you can only install one endpoint on each server. Does that mean that the endpoint can only resolve to one instance though?
The second implementation looks fine until the final step (start mirroring). I get the following error:
An error occured while starting mirroring
Alter failed for database 'test'
An exception occurred while executing transaction-sql statement or batch
The remote copy of database 'test' does not exist. Check the database name and resissue the command
I have created the test database in instance02 and rolled a log onto it. It is currently in recovery mode - waiting patiently for another log.....
I have read books online and 2k5 unleashed but can't see anything that relates to an implementation across mutliple instances on the DRmirrored servers.
Has anyone tried to do this? Can you confirm its possible?
Many thanks in advance...
View 3 Replies
View Related
Aug 18, 2015
Is it possible to have more than one instance of SQL Server on a failover Active/Passive cluster? What are the concerns/ramifications if that indeed is possible?
View 4 Replies
View Related
Sep 18, 2007
Greetings... I'm working at consolidating several Reporting Services installations into one so we can decommission some old servers. We have two Report Servers that are in SQL Server 2000 and three that are in SQL Server 2005 (none are in a web farm configuration). I can upgrade the 2000 databases to 2005 format just fine, but now how do I merge these five ReportServer/ReportServerTempDB databases into one? I'm reluctant to redeploy reports to the "official" Report Server because we lose security, subscription, and scheduling information by doing that. So redeploy would cost us time and data loss over hundreds of reports, thus my hope to merge the databases at a data level. Is there a tool to automate this process, or has anyone tried this before? Thanks in advance.
Austin
View 8 Replies
View Related
Jun 18, 2014
I was told that if I wanted to setup mirroring between multiple instance on the same server that each endpoint had to be different number. Is that true? Or can I use the default 5022 for each instance?
Ex.
Server1Instance1
Use endpoint 5022
Server1Instance2
Use endpoint 5022
VS
Server1Instance1
Use endpoint 5022
Server1Instance2
Use endpoint 5023
View 4 Replies
View Related
May 18, 2015
i want to run a transaction across mulitpule instences of sqlserver with out linked server.
distributed trnasaction can do it with link server , can it do it with out linked server.
View 9 Replies
View Related
Jul 23, 2005
Hi,I'm having a problem running a distributed transaction between twolinked servers that both have multiple instances of SQL Serverinstalled on them. This is the error message that I receive:"The operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.[OLE/DB provider returned message: New transaction cannot enlist in thespecified transaction coordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a]."The query follows the format:"BEGIN DISTRIBUTED TRANUPDATE [LINKEDSERVER1INSTANCE_NAME].DB.OWNER.TABLENAMESET fieldname = alias2.fieldnameFROM tablename alias2JOIN [LINKEDSERVER1INSTANCE_NAME].DB.OWNER.TABLENAME alias1on alias2.urn=alias1,urn"[color=blue]>From what I can gather from various sources the SQL Server must be[/color]named the same as the computer which it is installed on. However, if Ihave two instances of SQL Server, they cannot both be named the same asthe computer. Does anyone know of a way around this or whether I'mbarking up the wrong tree completely?Many thanks.
View 2 Replies
View Related
May 9, 2006
I have a website running under Windows Server 2003 which I am trying to deploy Reportin Services to using a custom security extension using Forms authentication. There is also another website which is just a Report Server running on this IIS 6.
On my development machine, XP with IIS 5.1, the Website with Reporting Services using forms authentication works fine, shares cookies for authentication and all that jazz. but trying to configure a second instance of Reporting Services on Server 2003 is not behaving.
Is there some trickery or details involved with running two instances of Reporting Services?
Also in the Configure Report Server tool it is failing and so not initializing on the last step of the Database Setup
Setting Connection Info for Reporting Server
ReportServicesConfigUI.WMIProvider.WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running, and then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC server is not listening. (Exception from HRESULT: 0x800706B3)
--- End of inner exception stack trace ---
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject mo)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ListReportServersInDatabase(RSReportServerInfo[]& serverInfos)
View 1 Replies
View Related
Mar 31, 2008
Hi
We are trying to setup a number of SQL Server 2005 database instances on a single server. The server has multiple IP addresses bound to its network interface (card). Each instance is configured to listen on a specific (unique) port on 127.0.0.1 and port 1433 on a specific (unique) IP address configured on the network interface. Finally, there is another instance of SQL Server (which also has the Reporting Services, Analysis Services and Integration Services installed) that does not allow remote connections and has TCP/IP disabled.
SSL is configured for all instances, apart from the non-remote connections instance, as follows: The same self-signed certificate is specified for every instance. This certificate has been configured for all 127.0.0.1 ports and port 1433 on all IPs in use for any of the instances using httpcfg as documented. The Force Encryption option is enabled and the Hide Instance option is disabled.
All appears to work correctly, and the "The certificate was successfully loaded for encryption" message appears when sp_readerrorlog is run, for the instances it is supposed to. However, at some point a problem occurs. The Force Encryption and Hide Instance labels _disappear_ (leaving blank spaces in the grid) from the interface, with the drop-down settings still visible. This seems to happen after installing an additional instance, although on one occasion it was after the 3rd was installed and on another occasion the 4th. Uninstalling the instances (even all of them) does not seem to help - only removing SQL Server 2005 completely and re-installing allowed the labels to re-appear.
Another concern is that after problem occurs, it appears that the settings are not being interpreted correctly. Even if the certificate is disabled for an instance, the message "The certificate was successfully loaded for encryption" appears, instead of the instance using a self-signed certificate. Additionally, on some occasions, the values for the Force Encryption and Hide Instance are swapped (or at least the values in the positions that used to be inline with the labels for these options).
As an additional note, various IIS Web Sites are configured on each of the IPs on the network interface. These are also using the same self-signed certification for SSL and are all using port 443, which none of the SQL server instances are configured to use.
Any feedback or suggestions on this would be appreciated. Thanks.
View 1 Replies
View Related
Jul 13, 2015
I am currently having publisher(database A), subscriber (database B) and distributor on the same instance for a test environment that is using a uni directional transactional replication. Now I need to setup another unidirectional transactional replication in the same test instance but for a different database. Publisher database is D and subcsirber database is E.
View 4 Replies
View Related
Jan 31, 2008
I have a situation where I would like to set up one DB server instance for US and anther one for AUStralia. The Instance should share the same data base/hardsisk. One of the instances will be running in using US time zone and anothe one in Australia time zone.
There will be 2 Application instaces one poinint to each SQL Server instance. This applications does write into the database
So the underlying requirment is to have 2 database server running in differnet time zones but accessing the same disk/set of data
What is the best way to do this? Is it linked servers?Girish
View 3 Replies
View Related
Aug 3, 2006
Hi,
I am trying to install multiple application services on 1 sql server database. Is this possible? I do not know how to install anything but the default application services settings for the membership, roles, etc.
Please help if you can.
Thanks,
Ezeibe
View 1 Replies
View Related
Apr 12, 2015
I'm looking at installing 2008R2 and 2014 side by side, then using Mirroring to provide HA for the 2008R2 instance and AoHA for the 2014 instance. I'd be using the same two physical servers for both the Mirroring pair and the AoHA pair.
View 2 Replies
View Related
Jan 3, 2008
My client has a server running MS 2003 Server for Smal Business Server, and it has SQL Server Express 2005 installed (I believe it is installed 3 times, as part of SharePoint, Veritas Backup Exec and ACT! applications).
I am trying to implement an application that uses SQL Server 2000, but the Server 2003 SBS does not support that version. So I need to launch an additional instance of SQL Server Exp 2005.
To do so, do I need to download and install SQL Server Express 2005 software again? Or can I just run SQLSVR.exe from an existing instance, but with a different instance name (sqlservr.exe -s<InstanceName>?
The reason I need another instance is that these existing instances limit DDL statements.
I am new to this and compare it to launching MS Word multiple times - you don't need to reinstall Word to run it multiple times.
Is launching from the command line a bad idea - and if it is, what is the better way to ensure that it launches under the local system context a service?
Thanks in advance for any help and insights. It is much appreciated.
View 9 Replies
View Related
Aug 17, 2015
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
View 3 Replies
View Related
Apr 30, 2015
One of my varchar columns in a table has multiple key words enclosed in a pattern of special characters.
Eg: William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world's pre-eminent [##dramatist##]. He is often called England's national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain. His plays have been translated into every major living language and are performed more often than those of any other [##playwright##].
I need to write to query to find all distinct key words that are enclosed within [## and ##]. My query should yield the following results from the string in the example above
[##actor##]
[##dramatist##]
[##playwright##] -- 2 occurrances, but I need it only once in my result set
[##poems##]
[##poet##] -- 2 occurrances, but I need it only once in my result set
[##sonnets##]
[##verses##]
[##writer##]
I need to run this on a large table, so I am looking for the best possible way to minimize any performance issues.
Just give you sample code, I have provided below 2 separate snippets, one with table variable and another with temp table.
DECLARE @MyTable TABLE (MyString VARCHAR (8000))
INSERT @MyTable VALUES ('William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world''s pre-eminent [##dramatist##]. He is often called England''s national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain.
[code].....
View 7 Replies
View Related
Jun 23, 2015
I am playing around in a test environment with SQL Server 2014. I have a question about the default location of the report server databases when you have multiple report server instances installed on one server.
I did a very simple install of SQL Server 2014 with the database and Reporting Services in Native Mode (install only) features selected. Accepting the default locations, I ended up with the following locations as you would expect:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVER
C:Program FilesMicrosoft SQL ServerMSRS12.MSSQLSERVER
Running the Reporting Services Configuration Manager, I created the Report Server database. After creating the Report Server database, the related files will be located below in the SQL folder as I would expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA
Next I installed another instance, which I called Test, of SQL Server 2014 like I did above. I now have the following folder structure the Test instance as I expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.TEST
C:Program FilesMicrosoft SQL ServerMSRS12.TEST
Running the Reporting Services Configuration Manager, I select the Test instance and create the Report Server Test instance database.
My first thought would be that the Test instance Report Server database would be in the following location:
C:Program FilesMicrosoft SQL ServerMSSQL12.TESTMSSQLDATA
Instead this database is located with the default instance Report Server database:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA
View 2 Replies
View Related
Dec 1, 2007
i have sql server 2005 express running. during install, i had issues with a system dll that i found answers online and resolved. i am still very green, but i know much more now than i did at the time. i believe that as a result of the partial then failed installs i have multiple instances either fully or partially installed. when i am in the sql server mgmt express environment, it lists two sql engines. i only ever use one, and would like to safely remove the second without damaging or corrupting anything done with the other instance.
my reasons for wanting to do this are twofold. first, i would like to free up the drive space taken up by the second instance. (i am a stickler for clean harddrive mgmt and maintenance). second, now that i have used the software and am somewhat more familiar with it, i would consider installing a second, intentional instance so that i may attempt to better customize some of the install-time settings and configurations.
can anybody give me any pointers/ guide me in the direction of information on how to SAFELY go about this?
thank you in advance for any help.
View 5 Replies
View Related
Mar 6, 2003
I created a second SQL2000 instance on a Windows 2000 server. The strange thing is that I can create an ODBC connection to the default instance but cannot for the new named instance. If I try from a client that has SQL installed on it, I can see both instances. Any idea why this is happening?
Thanks,
Ken Nicholson
View 3 Replies
View Related
Jun 9, 2014
We're trying to decide if we should use a single large instance of SQL Server or multiple instances on the same server. This is for a dev environment.Have to limit max RAM per instance so no instance grabs it all.There will be I/O contention and CPU contention between instances since the different instances won't coordinate with each other.It limits the available RAM for In-Memory tables..It sets lower limits to the amount of RAM available for any given query, causing artificial "contention" even when there's nothing else running at the time.
View 2 Replies
View Related
Mar 26, 2007
According to the Task Manager, on my SBS 2003 Server, I'm running multiple instances of SQL. How do I determine which instance(s) are required to maintain server stability, and which are not. My Server resource use continues to be a perennial problem. Please advise.
View 3 Replies
View Related
Nov 9, 2007
SQL Server 2005 Enterprise
Is it possible to have multiple instances attach the same database?
I have a scenario where I want to have on one node, a clustered instance and a non clustered instance and both instances attach the same singular DB on a filer.
Is this possible?
View 1 Replies
View Related
Dec 11, 2006
Can SQL Server be setup such that one instance on a server is using SSL and another instance is not? Or is SSL a server-wide all-or-nothing issue?
Dave
View 5 Replies
View Related
Apr 6, 2006
Does SQL Server express support running multiple instances of database ?
View 1 Replies
View Related
