I am using the following query to retrieve the top five customers from a MySQL table where 'accmanid' 1:
SELECT accmanid, custid, SUM(billone + billtwo) AS
total FROM customers WHERE accmanid = 1 ORDER BY total DESC LIMIT 5
This outputs five rows ordered by the total bill where accman = 1.
Here is my question:
How can I write the query to output five rows for EACH accmanid; Im not sure how to do such without the WHERE clause.
Create table #table (id int identity , from_country varchar(20) ,
to_country varchar(20),noofdays int, datetravel datetime )
insert into #table(from_country,to_country,noofdays,datetravel)
values
('Malaysia','India',2,getdate()-99),
('India','Singapore',4,getdate()-88),
('Singapore','China',5,getdate()-77),
('China','Japan',6,getdate()-66),
('Japan','USA',7,getdate()-55)
select * from #table
I want to insert data to another table based on "noofdays" columns. If "noofdays" is 4 then 4 rows should inserted to new table with 1 day increment in "datetravel" column.
Ex :
#table
1MalaysiaIndia22015-02-09 02:04:09.247
2IndiaSingapore42015-02-20 02:04:09.247
[code]...
In #table , 1st row noofdays is 2 , so in new table #table_new first 2 rows should inserted with 1 day increment in "datetravel" column.
Hi,
I have different tables with the same schema as follows
ID Name
-----------------
<Table 1>
ID Name
-------------------
1 Name1
2 Name2
3 Name3
<Table 2>
ID Name
-------------------
1 Name1
4 Name4
5 Name5
I just want to delete the row where ID = 1 from these tables in one query ? Is it possible??
Thanks
~Mohan
Hi,
I have the following scenario :
CustomerDetail
customerid
customername
status
app_no
[status = 0 means customer virtually deleted]
CustomerArchive
archiveno [autoincrement]
customerid
customername
status
At the end of the month, I have to physically delete customers. I have written two stored procs:
proc1
create proc spoc_startdeletion
as
declare @app_no int
select @app_no = (select app_no from customerdetail where status=0)
EXEC spoc_insertcustomerarchive @app_no
-- After transferrin, physically delete
delete from customerdetail where status=0
proc2
create proc spoc_insertcustomerarchive
@app_no int
as
insert into customerarchive(customerid,customername,status)
select customerid,customername,status from customerdetail where app_no = @app_no
It works fine if there is only one row with status=0, however the problem is that when there are multiple rows in customerdetail with status=0, it returns 'Subquery returned more than one value'
How can i transfer multiple rows one by one from the customerdetail to customerarchive and then delete the rows once they are transferred.
Vidkshi
I want to count the rows in the Incident Table by using filters to limit the rows to be counted if they meet the below conditions. I know I need a logical test for each row of the incident table based on the apparatus table’s rows. But, I want to test for each row in the incident table, counting, but not returning a true or false in the overall measure.Something like look at each incident row, test for true or false and then count IF the statement is true. Then go to the next incident row and do the same. The aggregation would be the final count of “true” results.I tried this for MET objective:
=CALCULATE(COUNTROWS(incident),
apparatus[Incident Response Time] >-1 ||
apparatus[Incident Response Time] <320,
uv_901APP_TYPE[Description]="Engine",
uv_901INCIDENT[Top_Category]="Fire"
[code]....
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1
set weight= d.weight,
stateweight=d.stateweight,
overallweight=d.overallweight
from
(select * from table2)d
where table1.state=d.state and
table1.month=d.month and
table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
I'm having an Employee table with a Salary field. How can we increate thesalary of the employees with following conditions:1) salary between 1000 and 10000 : increase 25%2) salary between 10000 and 20000 : increase 15%3) salary between 20000 and 30000 : increase 5%Surely you can create a cursor to solve this. But the question is, Is itpossible to solve this in a single query, if no what is most optimizedway?
View 4 Replies View RelatedNot sure how to do this but here is example of what I have
Table A
ID data1 data2 data3 data4
1 535 452 213 554
2 325 651 321 554
3 654 846 096 355
4 765 658 321 422
I want to have a select that will pull the following information out with count = the number of rows that have matching data in data4
ID data1 count
1 535 2
2 325 2
3 654 1
4 765 1
Right now I am using a VB script to loop thru get the current data4 value then using SELECT COUNT(data1) AS count FROM tbl_toolerrors WHERE data4 = {data4 value currently looking at}
Of course this take a bunch of trips to database and I think there should be a way to do it. I was thinking of a nested SQL querry like
Select data1, data2, ID, data3, (select count ...) Order by data1
can anyone help?
Hi,
I have two tables : Students and StuHistory. The structure of the Student table is as follows :
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Student]') AND type in (N'U'))
BEGIN
CREATE TABLE [dbo].[Student](
[RID] [int] NOT NULL,
[Class] [int] NULL,
[Section] [char](1) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[SubSection] [int] NULL,
[RollNo] [int] NULL,
[DesiredRoll] [int] NULL,
[TrackingNo] [int] NULL,
[Original_rollno] [int] NULL,
[StudentStatus] [int] NULL
)
END
GO
A section has subsections where students are allocated rollno's. Every student has a unique roll no in that subsection. However he is also given a choice to enter his desired roll no. If more than one student choose the same desired roll no in that subsection/section, there is a [TrackingNo] field that then starts keeping a count. For the first unique desired roll no in that subsection/section the tracking no is always 0.
[StudentStatus] represents the following : (-1 for deleted, 0 for edited, 1 for newly inserted).
After every fortnight, i have to run a batchquery that does the following:
1. all students marked with -1 are moved to a table called StuHistory which has the same structure as that of Student.
2. Now oncethe -1 status students are moved, there will be a gap in the roll no. I want to reallocate the rollnos now, where rollnos = desired roll no taking into consideration the trackingno
So if 4 students have chosen the desired roll no as 5 and their current roll no is scattered in a subsection lets say 7, 10, 14,16, then while rearranging they will be together(grouped by subsection/section) and will be allocated roll no's 5,6,7,8. The other students will be moved down based on their desired roll nos. Over here i have to also fill the gaps caused because of the students who were deleted.
How do i write query for this? I have been struggling.
I thought of posting this as a new post as it was mixed in the previous post.
Script :
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (1, 1, N'A', 1, 1, 1, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (2, 1, N'A', 1, 2, 2, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (3, 1, N'A', 1, 3, 1, 1,0,1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (4, 1, N'A', 12, 1, 1, 0,-1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (5, 1, N'A', 12, 2, 1, 1, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (6, 1, N'A', 12, 3, 2, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (7, 1, N'B', 5, 1, 3, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (8, 1, N'B', 5, 2, 3, 1, 0 ,1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (9, 1, N'B', 5, 3, 3, 2, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (10, 1, N'B', 5, 4, 2, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (11, 1, N'B', 5, 5, 2, 1, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (12, 1, N'B', 10, 1, 1, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (13, 1, N'B', 10, 2, 1, 1, 0, 1 )
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (14, 1, N'B', 10, 3, 1, 2, 0, -1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (15, 1, N'B', 10, 4, 2, 0, 0, 1)
Thanks.
I am trying to put a rag colour to text using the expression builder The RAG colours are the standard RED - AMBER -GREEN except the condtions to each are 2
For example A figure is between 70% and 75% and the code for this is P
I can manage to get this to work with the condition being between the percentage but not if it also meets the code P criteria.
Any assistance in mulitple conditions would be great
I need to find the rows that exist in one table but not in the otherwith this condition:(prod_name exist in table1 and not in table2.prod_name ) AND(prod_name exist in table1 and not in table2.'S'+prod_name )explanation:i want to know if the product not exit and if the combination of thecharachter "S" with the product Name also not exist at the othertableB.Ryuvi
View 2 Replies View RelatedI have table with filed
EmpProject -Table
Empno, Name, Project NO, cost center
I need to restrict the results by project No by user input. In case if user did not provide any value for the projectNO, then need to fetch all rows.
Select empno, name, projecno, cost_center from empproject where projectno=nvl(:pno, :deptno)
I am using SQL Server 2008.Each stock item will have default 4 document type (1, 5, 6, 7) and each will have 3 zone's (1, 2, 3) to qualify. Each zone will be updated to 1 for that document type if the item successfully pass through it. If all zone are NULL means no transaction. How to retrieve only the failed rows which means not all zone are 1 or NULL.In the image GJ-00064 has one row failed. So how to get the count of failed rows for each item
Expected result:
Uniid <-> Stockcode <-> FailedRows
1670 <-> GJ-00064 <-> 1
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
ID Pat_ID
1 A
2 A
3 A
4 A
5 A
6 B
7 B
8 B
9 C
10 D
11 D
I want output for the above as:
Pat_ID ID1 ID2 ID3
A 1 2 3
A 4 5 null
B 6 7 8
C 9 null null
D 10 11 null
Please help me. Thanks!
I know how to query up duplicate records, here is what I am using to do so:
Select PhoneNum, Count(PhoneNum) as NumOccurances
From Tester
Group By PhoneNum
Having (Count(PhoneNum) > 1)
when the duplicates arise, I expect them to have unique CallResultCode values, and I would like to make a priority of which value stays and which one gets dumped, keep in mind that I am a SQL noob.
Registered Linux User #365191
Hi All,
I am trying to do something like this
Select * from Table 1 where (field1, field2, field3) IN (select field1, field2, field3 from table2 where fieldx = 'rt')
This can be done in oracle. Is there any equivalent in SQL Server ?
Can anybody please help !
Thanks.
PN
Hi All,
I am trying to do something like this
Select * from Table 1 where (field1, field2, field3) IN (select field1, field2, field3 from table2 where fieldx = 'rt')
This can be done in oracle. Is there any equivalent in SQL Server ?
Can anybody please help !
Thanks.
PN
Hi below sample data incoming from a source that cannot be changed. Please ignore the mishandling of zls. Obviously it is not insurmountable - I am just interested in why it is happening because I cannot explain it. DECLARE @t TABLE(the_data CHAR(73)) SET DATEFORMAT dmySET NOCOUNT ON INSERT INTO @tSELECT ' 11'+SPACE(5)+'1649KN889001 2'+space(10)+'0'+space(10)+'08 01 2002'+space(10)+'04 10 2002'UNION ALLSELECT ' 11'+SPACE(5)+'1649KN889001 2'+space(10)+'109 08 2004'+space(20)+'21 07 2005'UNION ALLSELECT ' 11 13026721XX198734 1'+space(10)+'0'+space(10)+'XXXXXXXXXX'+space(10)+ '09 01 2003' SELECT CAST(REPLACE(REPLACE(date1_text,' ','/'),'XXXXXXXXXX',NULL) AS SMALLDATETIME) AS date_1_prob,CAST(REPLACE(REPLACE(date1_text,' ','/'),'XXXXXXXXXX','') AS SMALLDATETIME) AS date_1_ok_ish,CAST(NULLIF(REPLACE(date1_text,' ','/'),'XXXXXXXXXX') AS SMALLDATETIME)AS date_1_fine, date1_textFROM--derived table - selecting relevant substring(SELECT LTRIM(RTRIM(SUBSTRING(the_data, 44, 10))) AS date1_textFROM @t)AS der_t date_1_prob date_1_ok_ish date_1_fine date1_text----------------------- ----------------------- ----------------------- ----------NULL 2002-01-08 00:00:00 2002-01-08 00:00:00 08 01 2002NULL 1900-01-01 00:00:00 1900-01-01 00:00:00 NULL 1900-01-01 00:00:00 NULL XXXXXXXXXX Can anyone explain the result in the first row first column? Thanks
View 8 Replies View RelatedI have a query where i would calculate the counts of three Servers
declare @Managed float
declare @Active float
DECLARE @Values varchar(1000)
SET @Values = 'WE,EE,CO'
select @Managed = count(Name0) from v_R_System where Operating_System_Name_and0 like '%Workstation%'
[Code] ...
Here i need output like below
Workgroup Managed Active
'WE' 255 ,400
'EE' 300 ,450
'CO' 155, 600
So how to use these three values in the where condition when i use the where clause i have put in condition it will give me the subquery returns more than one value,so how should i use this scenario to accomplish this output?
I have around 3 tables having around 20 to 30gb of data. My table A related to table B by a FK and same way table B related to table C by FK. I would like to delete all rows satisfying certain condition from table A and all corresponding related records from table B and C. I have created a query to delete the grandchild first, followed by child table and finally parent. I have used inner join in my delete query. As you all know, inner join delete operations, are going to be extremely resource Intensive especially on bigger tables.
What is the best approach to delete all these rows? There are many constraints, triggers on these tables. Also, there might be some FK relations to other tables as well.
Here's what my table looks like;
UniqID | Code |
1 | ABC
1 | 123
2 | ABC
3 | ABC
4 | ABC
4 | ABC
I only want to UniqIds that only have the CODE of ABC... and if it contains ANYTHING other than ABC then It doesnt return that UniqID... Now keep in mind there's multiple different codes.. I'm just looking for a bit of code that drops any ID's that don't have my criteria.
I want to write an Query for a report that has 7 parameters. I want to allow Null for these parameters but at the same time in the Query i want to put an AND condition for all the parameters. I cannot put an OR condition.
For Example;
If i have a report with 2 parameters then the script will have 2* 2 If conditions
something like:-
if( @parameter1 is not Null and @parameter is not Null)
select A, B, C
From Table 1
Where parameter1 = @parameter1 and parameter2 = @prameter2
if( @parameter1 is not Null AND @parameter2 is Null)
select A, B, C
From Table 1
Where parameter1 = @parameter1
If( @parameter1 is Null AND @parameter2 is Not Null)
select A, B, C
From Table 1
Where parameter2 = @parameter2
If( @parameter1 is Null AND @parameter2 is Null)
select A, B, C
From Table 1
For 7 parameter there will be way too many If conditions. Is there an better approch to write a Query for such a situation?
I want to write a Stored Procedure which can search based on multiple condition and in default is select all.
Example :
User Name [ ALL ] Textbox
Project Name [ ALL ^] dropdown
ID [ ALL ^] dropdown
-----------------------------
Display On Gridview(Default display all records)
select one condition search one and so on.
Hi All,
I am working on SQL server 2005 Reports.
I have one report, one dataset is assigned to it, and one table which displays it.
Now I come accros requirement that, the column value in the filter condition for the table is present in one textbox.
I can not use textbox i.e. reportItems in filter condition. Can someone suggest me how to use textbox value in filters?
I want to display parent/child records on report. I am not getting the proper solution.
The data is like this:
Sequence ItemCode IsParent
1 XYZ 0 'do not have child record
2 PQR 1 'have child records with sequence no 3
3 ASD 0
3 AFDGE 0
3 VDC 0
4 ASR 1 'have child records with sequence no 5
5 ASR 0
If IsParent = 1, that record has child records with sequence = parent sequenece + 1
I think u can understand the data I need to bind, and it is like:
XYZ
+ PQR
ASD
AFDGE
VDC
ASR
On + click we can do show/hide of child records.
I m not getting how to achive this in SQL server report. Can u give some hint?
Thanks in advance
Pravin
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
I have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
View 3 Replies View RelatedI concatenate multiple rows from one table in multiple columns like this:
--Create Table
CREATE TABLE [Person].[Person_1](
[BusinessEntityID] [int] NOT NULL,
[PersonType] [nchar](2) NOT NULL,
[FirstName] [varchar](100) NOT NULL,
CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
Hello All,
I am rather new to reporting on SQL Server 2005 so please be patient with me.
I need to create a report that will generate system information for a server, the issue im having is that the table I am having to gather the information from seems to only allow me to pull off data from only one row.
For example,. Each row contains a different system part (I.e. RAM) this would be represented by an identifier (1), but I to list each system part as a column in a report
The table (System Info) looks like:-
ID | System part |
1 | RAM
2 | Disk Drive
10| CPU
11| CD ROM |
Which
So basically I need it to look like this.
Name | IP | RAM | Disk Drive|
----------------------------------------------
A | 127.0.0.1 | 512MB | Floppy
So Far my SQL code looks like this for 1 item
SELECT SYSTEM PART
FROM System Info
WHERE System.ID = 1
How would I go about displaying the other system parts as columns with info
Any help is much appreciated!
I have the following results:
ID, Office1
1, Testing
1, Hello World
What i am trying to do is to get this result:
ID, Office1, Office2
1, Testing, Hello World
how i can accomplish this task.
How to insert single row/multiple rows into multiple tables by using single insert statement.
View 1 Replies View Related